Guys pls I need help.
I lost sound on my phone after flashing a nougat based rom.
I can't even record video with camera. Anything related to audio is lost.
I've returned back to marshmallow but the issue is still there. Pls any help would be appreciated.
I have S-OFF and unlocked bootloader
edited: I fixed it thanks to ckpv5 and miffymiffy
I reverted to a sens based rom
and then i flashed his adsp
*warning this is for verizon only.
for other gsm m8,
check it out here
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220
Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.
ckpv5 said:
Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.
Click to expand...
Click to collapse
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks
i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?
Amri.NVR said:
i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?
Click to expand...
Click to collapse
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
rhaspody said:
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks
Click to expand...
Click to collapse
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.
ckpv5 said:
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.
Click to expand...
Click to collapse
Can you help me with the adsp.img file so I can flash it. Pls
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
You need the verizon adsp, not sure if GSM one is same.
Later when I'm home .. I'll make one for you based on VZW firmware.
I'll be home in 3 or 4 hours.
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
it works. thanks for your help
ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
Can you make that for me too?
Thanks before:good:
Amri.NVR said:
Can you make that for me too?
Thanks before:good:
Click to expand...
Click to collapse
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info
ckpv5 said:
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info
Click to expand...
Click to collapse
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:
Amri.NVR said:
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:
Click to expand...
Click to collapse
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.
ckpv5 said:
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.
Click to expand...
Click to collapse
this is my current getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro
Amri.NVR said:
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro
Click to expand...
Click to collapse
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1
ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
Click to expand...
Click to collapse
Thank's...i will try tomorrow :highfive:
Update : it's work dude, thanks for your help:highfive:
ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1
Click to expand...
Click to collapse
Hi... Same problem with sound, could your help me?
It happened after flash AICP 7.1.2 update, then restore to sense stock rom but not solve the problem...
My device fastboot getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
UPDATE:
I solved the problem reinstalling stock firmware (I had to re-lock bootloader, my device is S-ON) then re-unlock bootloader and re-install recovery image all via fastboot.
Once done this, I reinstalled my backup from recovery... and the problem was solved, audio is back..!!!
-
I have no audio in phone too. I don't know if it the same issue as is being fixed on this thread, but my phone is not working either. I can use sim data, texting, but cannot make or receive calls, and no audio works.
In case this can be fixed by your flash zip file, i would ask if it is possible for one to me made that would work with my phone.
My fastboot getvar all.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.771.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
tvmans said:
I have no audio in phone too.
My fastboot getvar all.
(bootloader) version-main: 6.13.771.4
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
Click to expand...
Click to collapse
Has the phone been modified with custom ROM, or ever s-off, change CID, flash another carrier's firmware, etc. (to the best of your knowledge)?
The main version 6.13.771.4 (which indicates the current firmware) doesn't correspond to O2, as far as I know. The "771" versions correspond to H3G carrier. Firmware numbers for O2 should have "206" such as 6.13.206.5. Unless I'm missing something, I don't see how the "771" firmware could have been installed unless it was modified with s-off, change CID, etc.
Related
I converted to GPE and i tried converting back to sense using
http://forum.xda-developers.com/showthread.php?t=2733523
and i followed it when i would boot it would send me straight to stock recovery I did a wipe and then I tried installing the lollipop dev edition firmware, I have supercid, and now it just shows the bootsplash then turns back and repeats every ten seconds. It was originally ATT and installed twrp and I can't boot into it it just flickers
Try Dev Ed RUU: http://www.htc.com/us/support/htc-one-m8/news/
redpoint73 said:
Try Dev Ed RUU: http://www.htc.com/us/support/htc-one-m8/news/
Click to expand...
Click to collapse
I tried flashing the GPE 5.0 firmware so would I just install the RUU how it says or do I do something else.
edit i switched to 3.28 and it almost worked it said it failed updating parition
edit #2 It's stuck in RUU mode
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
EddyOS said:
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
Click to expand...
Click to collapse
I have the EXACT same problem. I did also flash that firmware, but the firmware you've linked to, does it work with an Android 5.0 ROM?
Also, when I'm in Recovery (CWM Philz Touch 6) it came up with some errors on partitions in the background.
EddyOS said:
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT444WM00802
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thats my getvar all and I tried flashing the the dev ruu and now it's stuck in Ruu mode and the update keeps failing at partition update
Rafa2745 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT444WM00802
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thats my getvar all and I tried flashing the the dev ruu and now it's stuck in Ruu mode and the update keeps failing at partition update
Click to expand...
Click to collapse
Why do you still have the Google MID? Change the MID to the WWE International(0P6B10000) flash the firmware with splash in that thread and then run the RUU for WWE.
Else if you want Developer edition, change MID to 0P6B12000(AT&T / Developer Edition) flash a firmware package for Developer Edition, flash the m8splash.zip (Attached in this thread) . Change CID to Developer Edition (BS_US001 / BS_US002) Run the RUU for Developer Edition. I think I saw that there is a RUU .zip file available in the stock backup's thread in general section(post 1).
*BS_US001 I believe is unlocked version, BS_US002 is Developer Edition.
BerndM14 said:
Why do you still have the Google MID? Change the MID to the WWE International(0P6B10000) flash the firmware with splash in that thread and then run the RUU for WWE.
Else if you want Developer edition, change MID to 0P6B12000(AT&T / Developer Edition) flash a firmware package for Developer Edition, flash the m8splash.zip (Attached in this thread) . Change CID to Developer Edition (BS_US001 / BS_US002) Run the RUU for Developer Edition. I think I saw that there is a RUU .zip file available in the stock backup's thread in general section(post 1).
*BS_US001 I believe is unlocked version, BS_US002 is Developer Edition.
Click to expand...
Click to collapse
Does the mid have to be correct adb doesn't recognize it that its there in fast boot
Rafa2745 said:
Does the mid have to be correct adb doesn't recognize it that its there in fast boot
Click to expand...
Click to collapse
I've seen some reckon that it's not necessary while also seeing some posting errors with MID check fail. Personally I changed the MID(First thing) before I even did anything else when converting back to Sense. SuperCID should be enough to flash any firmware on device(as I understand it) so perhaps MID isn't a problem.
If you want to change the MID though apparently you can still enter the adb commands through the recovery to change the MID so that shouldn't be a problem.
adb commands - inside running OS and recovery.
fastboot commands - fastboot mode (bootloader) and RUU mode.
Still though, try flashing the firmware with splash, or seperate firmware for Developer edition(Then the m8splash) <What I did, then run RUU.
Seems everyone in Australia is recieving the OTA update for lollipop except me, i did have my phone rooted but returned to stock (i think) with this thread - http://forum.xda-developers.com/htc-one-m8/help/returning-phone-to-stock-htc-one-m8-t3004928
anyone able to figure out why I haven't received it yet? my getver all info is below
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.018s
any help would be appreciated.
Because your device is wrongly configured.
How can you have a device with EU MID but HKG CID then expect OTA to lollipop ?
How can you expect an OTA for Australia when your device not showing any Australia details ?
To have OTA you must have either of these CID/MID :
EU/EU
HKG/HKG
AUS/AUS
well that explains why, so how would i go about fixing this, all these numbers confuse the hell out of me.
You have to decide which region that you want your device to be ?
I don't think you originally have a AUS region. I believe it is a HKG device.
And I suggest to completely convert it to EU region which suit you more.
I'll tell you what to do after you made your decision.
ckpv5 said:
You have to decide which region that you want your device to be ?
I don't think you originally have a AUS region. I believe it is a HKG device.
And I suggest to completely convert it to EU region which suit you more.
I'll tell you what to do after you made your decision.
Click to expand...
Click to collapse
ill go EU, i ordered phone online so its not from Australia. also i greatly appreciate any help you provide, possibly expect a donation from me
Your MID is ready for EU version.
What you need to do :
1. Copy all your important files from Internal Storage to PC as this procedure will wipe everything in the phone and you'll have a new out of the box phone with lollipop.
2. Download 4.16.401.10 RUU ZIP : https://drive.google.com/file/d/0B17smFr95pleU2NqcVB3NWxoNnM/view
rename it ruu.zip
3. Download htc_fastboot.exe : https://drive.google.com/file/d/0B8L4pkbzdlR3eTlJSjdKVEdHX1U/view
4. Change your CID from HKG HTC__622 to SuperCID 11111111
boot your device to fastboot/bootloader and connect to PC where you'll see fastboot usb in red
run this command fastboot oem writecid 11111111
5. Put the downloaded htc_fastboot.exe at the same folder that you have your fastboot.exe; same goes the ruu.zip
6. Run this command
fastboot oem rebootRUU - this will put your device is RUU mode
htc_fastboot flash zip ruu.zip - this will erase everything in your device and replace it with the latest lollipop image
This process will take a few minutes, and the phone will reboot a few times but once done it'll say complete
7. Once completed, reboot run setup wizard ... done
8. Optional .. to flash a custom ROM, you need to install a custom recovery. I' using the latest TWRP 2.8.6.0
Note : there is no need to change your device from S-Off to S-On and there is no need to relock bootloader.
Credit to @EddyOS for the files from his thread : http://forum.xda-developers.com/showthread.php?t=2735235
Good luck ... I'll check your progress later when I'm home (in 3 hours)
downloading now, will report back shortly.
so far so good, up to the optimizing apps part, anything else i need to do? like change CID or anything? or will i be able to still get OTA updates in the future with 11111111?
No need to do anything else, leave it 11111111. You'll get OTA when there is one.
Thanks man, you literally have no idea I've been trying to figure all this out, enjoy the donation, don't go spending it all at once
Hey guys,
I'm also in two minds on which firmware I will need to flash to get Lollipop, my phone is s-off with twrp 2.7.0.3.
C:\ABDFAST>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.U
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: --
(bootloader) imei: --
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.110s
Please could someone which firmware file I need to flash in order to get lollipop, ultimate goal is to install custom CM12. When ever I try to install CM12 via twrp when selecting and trying to install the package I get an error saying that I cant install due to bootloader being 3.16.0.0000 and need to update to 3.18.0.0000 or 3.19.0.0000 and have been told that I require a firmware update to get this? Is this correct?
Thanks
Geoffr86 said:
Thanks man, you literally have no idea I've been trying to figure all this out, enjoy the donation, don't go spending it all at once
Click to expand...
Click to collapse
Thanks ... highly appreciated
Anything you want to ask, you can always PM me.
if i run into any problems ill remember that
Hi, I've looked around the forum a bit wondering how to update to Marshmallow, but it's just been giving me a huge headache. I don't want to play around with any more files and backups etc. until I know exactly what I'm doing. Could somebody please kindly explain to me how to do the update?
Here is my getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance for any help guys.
The easiest way is to flash the ROM version of MM. No other edits needed. If you want to convert fully to MM you can change the CID and MID to the dev edition. Then flash the firmware and the RUU.
Those are some options.
---------- Post added at 12:44 PM ---------- Previous post was at 12:41 PM ----------
This is a good as stock flashable version of MM dev edition
http://forum.xda-developers.com/showthread.php?t=3262894
How do I change the MID?
moofiee said:
Hi, I've looked around the forum a bit wondering how to update to Marshmallow, but it's just been giving me a huge headache. I don't want to play around with any more files and backups etc. until I know exactly what I'm doing. Could somebody please kindly explain to me how to do the update?
(bootloader) version-main: 4.16.401.13
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
Thanks in advance for any help guys.
Click to expand...
Click to collapse
There is no Marshmallow update for your device version yet.
So save the headache ..
ckpv5 said:
There is no Marshmallow update for your device version yet.
So save the headache ..
Click to expand...
Click to collapse
Indeed ! The easiest way in the first place is to wait (if you are 100% stock) for the official update
Perhaps I should have listened... I changed the CID and MID to the developer edition and then flashed the marshmallow firmware, but now I'm stuck in RUU mode and can't seem to get out of it
These are the steps to RUU with Marshmallow on Developer Ed.
Check whether you skipped any steps
(of course after CID/MID is correctly changed to Developer Ed. is a must)
1. Download the 6.12.1540.4 firmware - https://drive.google.com/file/d/0B4jGj3SfskzMbzBtd1R1VHlmbVU/view?usp=sharing
2. Download the 6.12.1540.4 RUU if you still don't have it - http://www.htc.com/us/support/htc-one-m8/news/
3. place the firmware.zip that you downloaded in your fastboot folder then open command prompt from your fastboot folder
4. Put your device to bootloader/fastboot mode
Run below commands:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
You'll see -
if failed : FAILED (remote: 90 hboot pre-update! please flush image again immediately)
repeat fastboot flash zip firmware.zip
fastboot reboot-bootloader
5. Run 6.14.1540.4 RUU
6. Done
hey guys i need help i buyed an HTC one m8 and i found in it a custume rom ( candy5 ) i would to get back the stock one i read in a thread that i must see the firmware version but i dont have one it's empty !!! what should i do help me plz
PS: i'm S-ON :crying:
what i get
all: Done!
that's what i get guys
walidbenzii said:
all: Done!
that's what i get guys
Click to expand...
Click to collapse
to identify the firmware number you can search by cid & mid
post getvar all result after removing serialno and imei
me or someone else will help you find your firmware
walidbenzii said:
all: Done!
that's what i get guys
Click to expand...
Click to collapse
Post the whole getvar output, minus IMEI and serial number.
redpoint73 said:
Post the whole getvar output, minus IMEI and serial number.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Hi this is my M8...i want to get back to stock too via twrp
what is my version-main? or suitable backup to download
Thaanks in advance
Your main version is 4.19.61.2 or 4.19.61.3. This is based on your MID/CID and the radio baseband number (I just happen to know form experience that the radio number corresponds to 4.xx main version).
Its probably okay to restore the TWRP backup for the latter (4.19.61.3). Then restore stock recovery 4.19.61.3 and OTA to Marshmallow (assume that is what you want - most folks want to be updated to the more current Android version).
You should also update to TWRP 2.8.7, if it has an older TWRP installed (which is usually how main version gets wiped out - known bug on older TWRP builds).
Alternately, you can relock bootloader, flash signed firmware 6.12.61.4 using the file and instruction in Post #5 of the stock TWRP collection: http://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Then unlock bootloader again, flash TWRP back on the phone, and restore TWRP backup 6.12.61.4
hello sir plz help me here my phone info
M8_WLV PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.09.20.0926
OPENDSP-V46.2.2-00564-M8974_FO.0811
OS-3.31.512.2
BEFORE HAVE KITKAT VERSION WORKING FINE I UPDATE marshmallow after no network
plz help how to solve
syedjewel said:
hello sir plz help me here my phone info
M8_WLV PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.09.20.0926
OPENDSP-V46.2.2-00564-M8974_FO.0811
OS-3.31.512.2
BEFORE HAVE KITKAT VERSION WORKING FINE I UPDATE marshmallow after no network
plz help how to solve
Click to expand...
Click to collapse
How exactly did you "update" (or try to update)? Please describe step by step, using as much detail as possible (exact file names, results for each step, error messages, etc.), the exactly what you've tried to do.
Also, please do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Also, is the bootloader locked, unlocked or relocked (as indicated near the top of the bootloader screen)?
OS number 3.xx indicates you are still on KitKat.
Don't try any other modifications until we get more details about the phone; and give you specific instructions. Specifically, you have the Verizon variant, which is different from most other M8 versions. And if you are following guides intended for other versions, it can be a big problem. Flashing firmware (with s-off) for anything but the Verizon version can results in no network, and possibly even permanent damage. The situation is probably reversible, but we need more details to see what you've done.
redpoint73 said:
How exactly did you "update" (or try to update)? Please describe step by step, using as much detail as possible (exact file names, results for each step, error messages, etc.), the exactly what you've tried to do.
Also, please do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Also, is the bootloader locked, unlocked or relocked (as indicated near the top of the bootloader screen)?
OS number 3.xx indicates you are still on KitKat.
Don't try any other modifications until we get more details about the phone; and give you specific instructions. Specifically, you have the Verizon variant, which is different from most other M8 versions. And if you are following guides intended for other versions, it can be a big problem. Flashing firmware (with s-off) for anything but the Verizon version can results in no network, and possibly even permanent damage. The situation is probably reversible, but we need more details to see what you've done.
Click to expand...
Click to collapse
here is my phone info
C:\adb&fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 0.89.20.0321
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.55.605.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA45WSF02xxx
(bootloader) imei: 9900049972xxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 9900049972xxx
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B2****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fd3e0448
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.072s
and i update this version
0P6BIMG_M8_WL_M60_SENSE70_VZW_MR_VERIZON_WWE_6.21. 605.3_HSM_Radio_1.14.20.0930_CNV_CNV_VZW_2.93_002_ release_470486_signed
syedjewel said:
here is my phone info
C:\adb&fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 0.89.20.0321
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.55.605.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA45WSF02xxx
(bootloader) imei: 9900049972xxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 9900049972xxx
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B2****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fd3e0448
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.072s
and i update this version
0P6BIMG_M8_WL_M60_SENSE70_VZW_MR_VERIZON_WWE_6.21. 605.3_HSM_Radio_1.14.20.0930_CNV_CNV_VZW_2.93_002_ release_470486_signed
Click to expand...
Click to collapse
no one don't know solution?
Easy fix you have a old frimware, you have android m whit a android4.4.2 firmware
Just search your latest firmware for you device and flash it, follow all the steps,your radio,are so old, so no wifi and maybe not bluetooth work
syedjewel said:
hello sir plz help me here my phone info
M8_WLV PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.09.20.0926
OPENDSP-V46.2.2-00564-M8974_FO.0811
OS-3.31.512.2
BEFORE HAVE KITKAT VERSION WORKING FINE I UPDATE marshmallow after no network
plz help how to solve
Click to expand...
Click to collapse
korko said:
Just search your latest firmware for you device and flash it, follow all the steps,your radio,are so old, so no wifi and maybe not bluetooth work
Click to expand...
Click to collapse
there no solution
syedjewel said:
hello sir plz help me here my phone info
M8_WLV PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.09.20.0926
OPENDSP-V46.2.2-00564-M8974_FO.0811
OS-3.31.512.2
BEFORE HAVE KITKAT VERSION WORKING FINE I UPDATE marshmallow after no network
plz help how to solve
Click to expand...
Click to collapse
As far as I know, there is no Marshmallow update for your device variant.
If you update it using Verizon firmware/RUU .. you won't get any network.
You need to install the correct RUU for your device and your network may work again.
https://forum.xda-developers.com/showpost.php?p=67405970&postcount=5
You can read more here - https://forum.xda-developers.com/htc-one-m8/help/help-friends-t3402398
and I'm requesting moderator to move this to correct section (usually I won't answer a question posted in wrong section)
ckpv5 said:
As far as I know, there is no Marshmallow update for your device variant.
If you update it using Verizon firmware/RUU .. you won't get any network.
You need to install the correct RUU for your device and your network may work again.
https://forum.xda-developers.com/showpost.php?p=67405970&postcount=5
You can read more here - https://forum.xda-developers.com/htc-one-m8/help/help-friends-t3402398
and I'm requesting moderator to move this to correct section (usually I won't answer a question posted in wrong section)
Click to expand...
Click to collapse
bro i try this file but error(wrong image file)
syedjewel said:
bro i try this file but error(wrong image file)
Click to expand...
Click to collapse
how did you flashed it ?
try the other method
also what was the full error
ahmed.ismael said:
how did you flashed it ?
try the other method
also what was the full error
Click to expand...
Click to collapse
ERROR 156 here picture
https://ibb.co/i6S8WF
i flash with this method
AruwizardLP.zip
also try this way
Rename it 0P6BIMG.zip
Place it in sd card
Boot to bootloader
say wrong image file
syedjewel said:
ERROR 156 here picture
https://ibb.co/i6S8WF
i flash with this method
AruwizardLP.zip
also try this way
Rename it 0P6BIMG.zip
Place it in sd card
Boot to bootloader
say wrong image file
Click to expand...
Click to collapse
Have you tried fastboot method ?
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
Have you tried fastboot method ?
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
yes try fastboot method
syedjewel said:
yes try fastboot method
Click to expand...
Click to collapse
Ok
Post the result of fastboot getvar all ( after removing serialno,imei and meid ) again
There is tow different Info in this thread
And what the full name for the file you were flashing
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
Ok
Click to expand...
Click to collapse
I put up two links for him to read thru.
I'm too busy these few days.
Guide him to change the MID from 0P6B2**** to 0P6B20000
and change CID from SuperCID to LRA__001
https://forum.xda-developers.com/showpost.php?p=67506065&postcount=25
He can change back to SuperCID later but still no point to have SuperCID on this device variant .. you can't change it to any other firmware.
LRA RUU & OTA sometime won't play nice with SuperCID/SuperMID
syedjewel said:
yes try fastboot method
Click to expand...
Click to collapse
now after i saw @ckpv5 post i get it
to change MID to the proper MID for your device you need a rooted rom on the device
or just custom recovery TWRP ( recommended )
then after flashing TWRP reboot to recovery and allow system modification
then connect the device with your PC and open cmd window,and type
adb shell
press enter then just copy the next command and paste it in your cmd window ( don't try to write it by your self ) and press enter
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x32\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
after sending the above command type exit and press enter
then in TWRP menu choose to reboot to bootloader and change CID to LRA__001
follow this post instruction to change CID
https://forum.xda-developers.com/showpost.php?p=67506065&postcount=25
after you changed MID & CID proceed to flash again this RUU.zip from this post
https://forum.xda-developers.com/showpost.php?p=66044439&postcount=37
Source of MID changing
https://forum.xda-developers.com/showthread.php?t=2708581
ahmed.ismael said:
now after i saw @ckpv5 post i get it
to change MID to the proper MID for your device you need a rooted rom on the device
or just custom recovery TWRP ( recommended )
then after flashing TWRP reboot to recovery and allow system modification
then connect the device with your PC and open cmd window,and type
adb shell
press enter then just copy the next command and paste it in your cmd window ( don't try to write it by your self ) and press enter
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x32\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
after sending the above command type exit and press enter
then in TWRP menu choose to reboot to bootloader and change CID to LRA__001
follow this post instruction to change CID
https://forum.xda-developers.com/showpost.php?p=67506065&postcount=25
after you changed MID & CID proceed to flash again this RUU.zip from this post
https://forum.xda-developers.com/showpost.php?p=66044439&postcount=37
Source of MID changing
https://forum.xda-developers.com/showthread.php?t=2708581
Click to expand...
Click to collapse
hello sir now i flash success this file but unknown imei no network plz help
C:\adb&fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.21.512.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA45WSFxxxxx
(bootloader) imei: 990004997xxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 990004997xxxxx
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B2****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b361cfc7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.059s
You didn't change cid and mid ?
That's strange flash it again
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
You didn't change cid and mid ?
That's strange flash it again
c
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
i change cid and try to flash error image file and back write super cid try flash its success but no imei what i do now?
syedjewel said:
i change cid and try to flash error image file and back write super cid try flash its success but no imei what i do now?
Click to expand...
Click to collapse
Did the flash complete with success ?
try to change mid and cid as suggested before and flash again
If still not fixed
post the output of the flashing process here
You might have something wrong
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
Did the flash complete with success ?
try to change mid and cid as suggested before and flash again
If still not fixed
post the output of the flashing process here
You might have something wrong
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
now all setup complete success flashing done without error but still unknown imei plz help
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserv
C:\adb&fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.21.512.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA45WSF*****
(bootloader) imei: 9900049972*****
(bootloader) imei2: Not Support
(bootloader) meid: 990004997*****
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B2****
(bootloader) cidnum: LRA__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b361cfc7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s