Related
I converted to GPE and i tried converting back to sense using
http://forum.xda-developers.com/showthread.php?t=2733523
and i followed it when i would boot it would send me straight to stock recovery I did a wipe and then I tried installing the lollipop dev edition firmware, I have supercid, and now it just shows the bootsplash then turns back and repeats every ten seconds. It was originally ATT and installed twrp and I can't boot into it it just flickers
Try Dev Ed RUU: http://www.htc.com/us/support/htc-one-m8/news/
redpoint73 said:
Try Dev Ed RUU: http://www.htc.com/us/support/htc-one-m8/news/
Click to expand...
Click to collapse
I tried flashing the GPE 5.0 firmware so would I just install the RUU how it says or do I do something else.
edit i switched to 3.28 and it almost worked it said it failed updating parition
edit #2 It's stuck in RUU mode
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
EddyOS said:
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
Click to expand...
Click to collapse
I have the EXACT same problem. I did also flash that firmware, but the firmware you've linked to, does it work with an Android 5.0 ROM?
Also, when I'm in Recovery (CWM Philz Touch 6) it came up with some errors on partitions in the background.
EddyOS said:
I assume you flashed the ZIP file which is the 1.54.401.5 W Splash ZIP? After that, just flash this is RUU mode:
https://drive.google.com/file/d/0B17smFr95pleRk9VNjE2MTZMT1U/view?usp=sharing
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT444WM00802
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thats my getvar all and I tried flashing the the dev ruu and now it's stuck in Ruu mode and the update keeps failing at partition update
Rafa2745 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT444WM00802
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thats my getvar all and I tried flashing the the dev ruu and now it's stuck in Ruu mode and the update keeps failing at partition update
Click to expand...
Click to collapse
Why do you still have the Google MID? Change the MID to the WWE International(0P6B10000) flash the firmware with splash in that thread and then run the RUU for WWE.
Else if you want Developer edition, change MID to 0P6B12000(AT&T / Developer Edition) flash a firmware package for Developer Edition, flash the m8splash.zip (Attached in this thread) . Change CID to Developer Edition (BS_US001 / BS_US002) Run the RUU for Developer Edition. I think I saw that there is a RUU .zip file available in the stock backup's thread in general section(post 1).
*BS_US001 I believe is unlocked version, BS_US002 is Developer Edition.
BerndM14 said:
Why do you still have the Google MID? Change the MID to the WWE International(0P6B10000) flash the firmware with splash in that thread and then run the RUU for WWE.
Else if you want Developer edition, change MID to 0P6B12000(AT&T / Developer Edition) flash a firmware package for Developer Edition, flash the m8splash.zip (Attached in this thread) . Change CID to Developer Edition (BS_US001 / BS_US002) Run the RUU for Developer Edition. I think I saw that there is a RUU .zip file available in the stock backup's thread in general section(post 1).
*BS_US001 I believe is unlocked version, BS_US002 is Developer Edition.
Click to expand...
Click to collapse
Does the mid have to be correct adb doesn't recognize it that its there in fast boot
Rafa2745 said:
Does the mid have to be correct adb doesn't recognize it that its there in fast boot
Click to expand...
Click to collapse
I've seen some reckon that it's not necessary while also seeing some posting errors with MID check fail. Personally I changed the MID(First thing) before I even did anything else when converting back to Sense. SuperCID should be enough to flash any firmware on device(as I understand it) so perhaps MID isn't a problem.
If you want to change the MID though apparently you can still enter the adb commands through the recovery to change the MID so that shouldn't be a problem.
adb commands - inside running OS and recovery.
fastboot commands - fastboot mode (bootloader) and RUU mode.
Still though, try flashing the firmware with splash, or seperate firmware for Developer edition(Then the m8splash) <What I did, then run RUU.
Seems everyone in Australia is recieving the OTA update for lollipop except me, i did have my phone rooted but returned to stock (i think) with this thread - http://forum.xda-developers.com/htc-one-m8/help/returning-phone-to-stock-htc-one-m8-t3004928
anyone able to figure out why I haven't received it yet? my getver all info is below
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.018s
any help would be appreciated.
Because your device is wrongly configured.
How can you have a device with EU MID but HKG CID then expect OTA to lollipop ?
How can you expect an OTA for Australia when your device not showing any Australia details ?
To have OTA you must have either of these CID/MID :
EU/EU
HKG/HKG
AUS/AUS
well that explains why, so how would i go about fixing this, all these numbers confuse the hell out of me.
You have to decide which region that you want your device to be ?
I don't think you originally have a AUS region. I believe it is a HKG device.
And I suggest to completely convert it to EU region which suit you more.
I'll tell you what to do after you made your decision.
ckpv5 said:
You have to decide which region that you want your device to be ?
I don't think you originally have a AUS region. I believe it is a HKG device.
And I suggest to completely convert it to EU region which suit you more.
I'll tell you what to do after you made your decision.
Click to expand...
Click to collapse
ill go EU, i ordered phone online so its not from Australia. also i greatly appreciate any help you provide, possibly expect a donation from me
Your MID is ready for EU version.
What you need to do :
1. Copy all your important files from Internal Storage to PC as this procedure will wipe everything in the phone and you'll have a new out of the box phone with lollipop.
2. Download 4.16.401.10 RUU ZIP : https://drive.google.com/file/d/0B17smFr95pleU2NqcVB3NWxoNnM/view
rename it ruu.zip
3. Download htc_fastboot.exe : https://drive.google.com/file/d/0B8L4pkbzdlR3eTlJSjdKVEdHX1U/view
4. Change your CID from HKG HTC__622 to SuperCID 11111111
boot your device to fastboot/bootloader and connect to PC where you'll see fastboot usb in red
run this command fastboot oem writecid 11111111
5. Put the downloaded htc_fastboot.exe at the same folder that you have your fastboot.exe; same goes the ruu.zip
6. Run this command
fastboot oem rebootRUU - this will put your device is RUU mode
htc_fastboot flash zip ruu.zip - this will erase everything in your device and replace it with the latest lollipop image
This process will take a few minutes, and the phone will reboot a few times but once done it'll say complete
7. Once completed, reboot run setup wizard ... done
8. Optional .. to flash a custom ROM, you need to install a custom recovery. I' using the latest TWRP 2.8.6.0
Note : there is no need to change your device from S-Off to S-On and there is no need to relock bootloader.
Credit to @EddyOS for the files from his thread : http://forum.xda-developers.com/showthread.php?t=2735235
Good luck ... I'll check your progress later when I'm home (in 3 hours)
downloading now, will report back shortly.
so far so good, up to the optimizing apps part, anything else i need to do? like change CID or anything? or will i be able to still get OTA updates in the future with 11111111?
No need to do anything else, leave it 11111111. You'll get OTA when there is one.
Thanks man, you literally have no idea I've been trying to figure all this out, enjoy the donation, don't go spending it all at once
Hey guys,
I'm also in two minds on which firmware I will need to flash to get Lollipop, my phone is s-off with twrp 2.7.0.3.
C:\ABDFAST>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.U
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: --
(bootloader) imei: --
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.110s
Please could someone which firmware file I need to flash in order to get lollipop, ultimate goal is to install custom CM12. When ever I try to install CM12 via twrp when selecting and trying to install the package I get an error saying that I cant install due to bootloader being 3.16.0.0000 and need to update to 3.18.0.0000 or 3.19.0.0000 and have been told that I require a firmware update to get this? Is this correct?
Thanks
Geoffr86 said:
Thanks man, you literally have no idea I've been trying to figure all this out, enjoy the donation, don't go spending it all at once
Click to expand...
Click to collapse
Thanks ... highly appreciated
Anything you want to ask, you can always PM me.
if i run into any problems ill remember that
hello I need then updated my HTC M8 that has the software amended.-
bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s
copy text support HTC:
Unfortunately, this device does not OTA be updated because it is not within the region of the United States, because the update is launched by mobile operator AT & T, who personalize the software to be working within USA. Other than that, the software was modified to its original configuration:
cidnum: 11111111 <----- This CID does not match the M8 phone AT & T US .
To try to return the device to the original software, you will have to repay the aforementioned parameter to the original configuration. This is a fairly easy process. At this time, HTC officially does not support changing the cidnum: 11111111 our devices and that is why websites should explore support third-party development to find a straight answer about modifying the cidnum.
This does not mean that we can not go about it. We are happy to help with any questions and / or any other needs you may encounter during any step of your adventure development. We may have some limitations in the support, but we would like to provide guidance on what we can.
To begin with, the following websites are some examples of where we recommend you start your research on this.
http://Developer.Android.com
http://forums.xda-developers.com
http://www.androidcommunity.com
BR.
chmmza said:
hello I need then updated my HTC M8 that has the software amended.-
bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s
copy text support HTC:
Unfortunately, this device does not OTA be updated because it is not within the region of the United States, because the update is launched by mobile operator AT & T, who personalize the software to be working within USA. Other than that, the software was modified to its original configuration:
cidnum: 11111111 <----- This CID does not match the M8 phone AT & T US .
To try to return the device to the original software, you will have to repay the aforementioned parameter to the original configuration. This is a fairly easy process. At this time, HTC officially does not support changing the cidnum: 11111111 our devices and that is why websites should explore support third-party development to find a straight answer about modifying the cidnum.
This does not mean that we can not go about it. We are happy to help with any questions and / or any other needs you may encounter during any step of your adventure development. We may have some limitations in the support, but we would like to provide guidance on what we can.
To begin with, the following websites are some examples of where we recommend you start your research on this.
http://Developer.Android.com
http://forums.xda-developers.com
http://www.androidcommunity.com
BR.
Click to expand...
Click to collapse
You need to delete the serial and IMEI numbers.
---------- Post added at 11:24 AM ---------- Previous post was at 11:20 AM ----------
Also: Are you on stock? You have to get S-OFF to change the CID# and, typically, you need to be on stock to get S-OFF.
Ragarianok said:
You need to delete the serial and IMEI numbers.
---------- Post added at 11:24 AM ---------- Previous post was at 11:20 AM ----------
Also: Are you on stock? You have to get S-OFF to change the CID# and, typically, you need to be on stock to get S-OFF.
Click to expand...
Click to collapse
Hi there
thanks for answering
could you tell me how to do it
Best regards
No need to change the CID to update to Marshmallow.
If the bootloader indicates LOCKED or RELOCKED, simply try to run the Dev Edition Marshmallow RUU posted near the bottom of the following: http://www.htc.com/us/support/htc-one-m8/news/
If the bootloader is UNLOCKED, you will need to relock it before RUU, with the command: fastboot oem lock
Also, be aware that RUU will wipe the phone. So backup any personal data you want to keep on computer, cloud, etc.
redpoint73 said:
No need to change the CID to update to Marshmallow.
If the bootloader indicates LOCKED or RELOCKED, simply try to run the Dev Edition Marshmallow RUU posted near the bottom of the following: http://www.htc.com/us/support/htc-one-m8/news/
If the bootloader is UNLOCKED, you will need to relock it before RUU, with the command: fastboot oem lock
Also, be aware that RUU will wipe the phone. So backup any personal data you want to keep on computer, cloud, etc.
Click to expand...
Click to collapse
OK thank you very much ! testing the download
chmmza said:
OK thank you very much ! testing the download
Click to expand...
Click to collapse
One possible hitch, is that you may have to first find and flash the 6.12.1540.4 firmware zip before you can RUU. This isn't normally a requirement for running an RUU, but for some reason folks are encountering this on the MM RUU.
Let us know if you get an error message (and what number, or other error info) when running the RUU.
Not work
redpoint73 said:
One possible hitch, is that you may have to first find and flash the 6.12.1540.4 firmware zip before you can RUU. This isn't normally a requirement for running an RUU, but for some reason folks are encountering this on the MM RUU.
Let us know if you get an error message (and what number, or other error info) when running the RUU.
Click to expand...
Click to collapse
this is the error !!!
chmmza said:
this is the error !!!
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/htc-one-m8/help/error-155-t3321395
But to summarize:
1) Download this: https://www.androidfilehost.com/?fid=24269982087009972
2) fastboot oem rebootRUU
3) fastboot flash zip firmware.zip
Where "firmware.zip" is the actual file name of the file downloaded in step 1 (you can rename the file if you like).
4) Run command 3 again
5) fastboot reboot-bootloader
6) Run the RUU again
redpoint73 said:
See here: http://forum.xda-developers.com/htc-one-m8/help/error-155-t3321395
But to summarize:
1) Download this: https://www.androidfilehost.com/?fid=24269982087009972
2) fastboot oem rebootRUU
3) fastboot flash zip firmware.zip
Where "firmware.zip" is the actual file name of the file downloaded in step 1 (you can rename the file if you like).
4) Run command 3 again
5) fastboot reboot-bootloader
6) Run the RUU again
Click to expand...
Click to collapse
Hi there
I do not understand how to install 6.12.1540.4_firmware.zip
Help me
BR
chmmza said:
I do not understand how to install 6.12.1540.4_firmware.zip
Help me
Click to expand...
Click to collapse
I gave step by step instructions. You'll have to be more specific what part you don't understand.
In other words, I don't understand what you don't understand.
You run the fastboot commands the same way you did fastboot getvar all (to get the data for your Post #1).
redpoint73 said:
I gave step by step instructions. You'll have to be more specific what part you don't understand.
In other words, I don't understand what you don't understand.
You run the fastboot commands the same way you did fastboot getvar all (to get the data for your Post #1).
Click to expand...
Click to collapse
·······················Where put commands?··············· sd card?
Run below commands:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
chmmza said:
·······················Where put commands?··············· sd card?
Click to expand...
Click to collapse
You ran fastboot command to get the info you posted in Post#1 above, didn't you?
You run the commands from the directory wherever fastboot.exe is located (that location depends on how you installed fastboot).
Find that folder in Windows, then Shift-Right Mouse button, click "Open command window here".
firmware.zip also need to be located in that same folder (where fastboot.exe is located).
hello everybody ........ this is my device M8 info
version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i have a problem before and this forum give me the RUU.exe to fix it
this is RUU name : RUU_M8_UL_L50_SENSE60_MR_HTC_Europe_4.16.401.10_Radio_1.25.214500021.06G_20.68.4196t.01_F_release_417003_signed
this RUU lollipop after this i have another problem when this device update to marshmallow i do this official update and after restart my device is hang up on HTC logo and i tried to back to RUU lollipop and i found error massage it say Image Error as attachment
please help me i want to restore old lollipop or i want file as like this RUU to my device upgrade it to marshmallow official :crying: :crying: http://snap.ashampoo.com/JnWcTDn4
Since it looks like the OTA at least partially updated you to MM (based on the radio number), trying to run the LP RUU constitutes a downgrade; which is only possible if you have s-off.
What you want is the MM RUU for your CID. I'm not aware of an .exe version of the 6.12.401.4 RUU, but here is the zip version: http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
This has worked for several folks that had problems with the MM update.
thank`s
redpoint73 said:
Since it looks like the OTA at least partially updated you to MM (based on the radio number), trying to run the LP RUU constitutes a downgrade; which is only possible if you have s-off.
What you want is the MM RUU for your CID. I'm not aware of an .exe version of the 6.12.401.4 RUU, but here is the zip version: http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
This has worked for several folks that had problems with the MM update.
Click to expand...
Click to collapse
thank you ...... but i don`t know how can i install the RUU zip version .. sorry can you tell me by simply way because i am beginner in this filed
i got error
thank`s a lot for this ...... but i got an error in fastboot this is the link for screen shot explain this error
https://snap.ashampoo.com/qHDzzeIU
..... please i wanna to solve it
thank`s again for your efforts
elnwery said:
thank`s a lot for this ...... but i got an error in fastboot this is the link for screen shot explain this error
https://snap.ashampoo.com/qHDzzeIU
Click to expand...
Click to collapse
You can not use the generic fastboot to flash the RUU.zip (and that is what is causing the "not enough space" error), you need htc_fastboot and that is why the htc_fastboot is given in post I linked.
Did you download htc_fastboot.exe as indicated in the link, and follow the instructions?
ckpv5 said:
Make a folder say "RUU" on your desktop and put both RUU zip and htc_fastboot.exe in this RUU folder
Click to expand...
Click to collapse
Then run the command from that folder/directory. Shortcut in Windows to change to the right directory, with the desired folder open, mouse over it, Shift+right mouse button, then select from the menu "Open command window here".
Then typea in CMD window: htc_fastboot flash zip RUU.zip
Guys pls I need help.
I lost sound on my phone after flashing a nougat based rom.
I can't even record video with camera. Anything related to audio is lost.
I've returned back to marshmallow but the issue is still there. Pls any help would be appreciated.
I have S-OFF and unlocked bootloader
edited: I fixed it thanks to ckpv5 and miffymiffy
I reverted to a sens based rom
and then i flashed his adsp
*warning this is for verizon only.
for other gsm m8,
check it out here
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220
Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.
ckpv5 said:
Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.
Click to expand...
Click to collapse
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks
i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?
Amri.NVR said:
i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?
Click to expand...
Click to collapse
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
rhaspody said:
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks
Click to expand...
Click to collapse
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.
ckpv5 said:
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.
Click to expand...
Click to collapse
Can you help me with the adsp.img file so I can flash it. Pls
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
You need the verizon adsp, not sure if GSM one is same.
Later when I'm home .. I'll make one for you based on VZW firmware.
I'll be home in 3 or 4 hours.
rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
it works. thanks for your help
ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
Can you make that for me too?
Thanks before:good:
Amri.NVR said:
Can you make that for me too?
Thanks before:good:
Click to expand...
Click to collapse
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info
ckpv5 said:
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info
Click to expand...
Click to collapse
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:
Amri.NVR said:
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:
Click to expand...
Click to collapse
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.
ckpv5 said:
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.
Click to expand...
Click to collapse
this is my current getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro
Amri.NVR said:
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro
Click to expand...
Click to collapse
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1
ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
Click to expand...
Click to collapse
Thank's...i will try tomorrow :highfive:
Update : it's work dude, thanks for your help:highfive:
ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1
Click to expand...
Click to collapse
Hi... Same problem with sound, could your help me?
It happened after flash AICP 7.1.2 update, then restore to sense stock rom but not solve the problem...
My device fastboot getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
UPDATE:
I solved the problem reinstalling stock firmware (I had to re-lock bootloader, my device is S-ON) then re-unlock bootloader and re-install recovery image all via fastboot.
Once done this, I reinstalled my backup from recovery... and the problem was solved, audio is back..!!!
-
I have no audio in phone too. I don't know if it the same issue as is being fixed on this thread, but my phone is not working either. I can use sim data, texting, but cannot make or receive calls, and no audio works.
In case this can be fixed by your flash zip file, i would ask if it is possible for one to me made that would work with my phone.
My fastboot getvar all.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.771.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
tvmans said:
I have no audio in phone too.
My fastboot getvar all.
(bootloader) version-main: 6.13.771.4
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
Click to expand...
Click to collapse
Has the phone been modified with custom ROM, or ever s-off, change CID, flash another carrier's firmware, etc. (to the best of your knowledge)?
The main version 6.13.771.4 (which indicates the current firmware) doesn't correspond to O2, as far as I know. The "771" versions correspond to H3G carrier. Firmware numbers for O2 should have "206" such as 6.13.206.5. Unless I'm missing something, I don't see how the "771" firmware could have been installed unless it was modified with s-off, change CID, etc.