I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed
BrianKuo1853 said:
I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed
Click to expand...
Click to collapse
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.
Ariac Konrel said:
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.
Click to expand...
Click to collapse
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/
BrianKuo1853 said:
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/
Click to expand...
Click to collapse
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.
Ariac Konrel said:
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.
Click to expand...
Click to collapse
Finally got it working! Thanks a lot!
Related
Hi!
I have LG G4 H815 unlocked bootloader and rooted genisys rom 3.7. Im looking good soundmod.. i know there is viper4android and its the best, but it makes annoying crackling sound.
[SUPER MOD][4.3+/6.0][ v7.0.3 ] XTREMEMusic™ dont work on my phone, just got bootloop.
I really like this phone but i need better sound for my Pioneer SE-CL751 headphones.
I use the DARK version (see 2nd post) with Sony beats and it works great, no issues:
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
davebugyi said:
I use the DARK version (see 2nd post) with Sony beats and it works great, no issues:
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Click to expand...
Click to collapse
Ok. Looking good. Thanks for the info
davebugyi said:
I use the DARK version (see 2nd post) with Sony beats and it works great, no issues:
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Click to expand...
Click to collapse
Still that annoying cracling sound and now the music is sometimes on slow motion??
What ROM, Kernel and busybox version do you use?
MPihlaj said:
Still that annoying cracling sound and now the music is sometimes on slow motion??
What ROM, Kernel and busybox version do you use?
Click to expand...
Click to collapse
Genisys 3.7 - removed apps
Imperium 1.6 kernel
Busybox 1.24.1
davebugyi said:
Genisys 3.7 - removed apps
Imperium 1.6 kernel
Busybox 1.24.1
Click to expand...
Click to collapse
I have exactly the same! Busybox is 1.24.1 - meefik.
Still the cracling sound! Try to change the headphones but its same issue with every headphones.
MPihlaj said:
Still that annoying cracling sound and now the music is sometimes on slow motion??
What ROM, Kernel and busybox version do you use?
Click to expand...
Click to collapse
What was the exactly version that you installed?
The "slow motion" sound is when the screen is off or always?
Do you have atmos or dolby installed? If yes try to switch off.
Sent from my LG-H815 using Tapatalk
MPihlaj said:
Still that annoying cracling sound and now the music is sometimes on slow motion??
What ROM, Kernel and busybox version do you use?
Click to expand...
Click to collapse
Same here. So had to reinstall rom. What works is installing the beats port and atmos seperately (without Viper).
Try this.
It is an older version of the mod (december), but it should work as I use this one and not the new ones in the thread.
Any good sound mod for h811 genesys 3.7 plz? a mod that does not make crackling sound while calling
There are many Android sound mods:
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
http://forum.xda-developers.com/showthread.php?t=2191223
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
http://forum.xda-developers.com/android/software/ths-rehear-k-revolution-t3190471
http://forum.xda-developers.com/showthread.php?t=2085587
http://forum.xda-developers.com/android/software/mod-xperia-z5-premium-walkman-including-t3252123
the_scotsman said:
There are many Android sound mods:
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
http://forum.xda-developers.com/showthread.php?t=2191223
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
http://forum.xda-developers.com/android/software/ths-rehear-k-revolution-t3190471
http://forum.xda-developers.com/showthread.php?t=2085587
http://forum.xda-developers.com/android/software/mod-xperia-z5-premium-walkman-including-t3252123
Click to expand...
Click to collapse
The thing is, OP wants them to work. I am on LS991 ZV6 and I find myself in a bootloop with certain mods you listed.
lucky you guys :crying:
hate you stupid H818 :crying:
I have Viper 2.3.4.0 codename "Beautiful", and Dolby Atmos running just fine on my H811. I'm running the latest Genisys rom, with SuperXe kernel 1.7. Audio during calls is great, no static or noise. Also haven't had any performance or boot problems as of yet.
I previously installed Xtrememusic MOD 6.2 but it did not sound very good at all. Viper4android makes such a huge difference and I can tweak it until it's perfect. Xtrememusic didn't give very many options and most sounded bad.
I am wondering, if any of you use maxxaudio on OxygenOS. Yesterday Iflashed MaxxAudio-CM13-_ahmed_radaideh-STABLE-v3.1.zip and it worked great. But today I was not able to get it to do its magic again. I reflashed it, and works again, but I am wondering if someone investigated more or can point me to working version for OxygenOS.
I only used ViPer4Android as a sound enhancer. Therefore the SELinuxMode has to be permissive instead of enforcing. There are apps where you can change this like SELinuxModeChanger.
Maybe Maxxaudio changes this while flashing, but it gets reset every time you reboot your device. Had this issue in the past, it may help in your case.
Falkenhorst said:
I only used ViPer4Android as a sound enhancer. Therefore the SELinuxMode has to be permissive instead of enforcing. There are apps where you can change this like SELinuxModeChanger.
Maybe Maxxaudio changes this while flashing, but it gets reset every time you reboot your device. Had this issue in the past, it may help in your case.
Click to expand...
Click to collapse
Can u give me flash able viper4Android zip
HatRiGt said:
Can u give me flash able viper4Android zip
Click to expand...
Click to collapse
Second post, and someone is already hijacking this thread. Why?!
Hey, How about installing the SEmodechanger app and using MaxxAudio? How was the Output and Quality after the mod? I tried installing Viper4Android but faced bugs like Slow Phone, Crashing Process and No Audio Output
I like turtles, does anyone else like turtles?
Sent from my ONEPLUS A3000 using Tapatalk
rickyx32 said:
I like turtles, does anyone else like turtles?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Well they taste good.
jvybihal said:
I am wondering, if any of you use maxxaudio on OxygenOS. Yesterday Iflashed MaxxAudio-CM13-_ahmed_radaideh-STABLE-v3.1.zip and it worked great. But today I was not able to get it to do its magic again. I reflashed it, and works again, but I am wondering if someone investigated more or can point me to working version for OxygenOS.
Click to expand...
Click to collapse
How about now ? Did you find a working MaxxAudio in OxygenOS. ahrion's work don't work on mm, the other with refined GUI crashed on OxygenOS.
I have install viper4android. Woth ARISE and Divinebeats. Both worh for headest and speaker but on a bluetooth device like connected to my car doesnt work. The phone freeze and stutter until i disable bluetooth. Im using 3.2.7 ooslite. Any idea what im doing wrong.?
eduardmc said:
I have install viper4android. Woth ARISE and Divinebeats. Both worh for headest and speaker but on a bluetooth device like connected to my car doesnt work. The phone freeze and stutter until i disable bluetooth. Im using 3.2.7 ooslite. Any idea what im doing wrong.?
Click to expand...
Click to collapse
Remove V4A, instal busybox and instal V4A again
Anthony1396 said:
Remove V4A, instal busybox and instal V4A again
Click to expand...
Click to collapse
No go, i tried that before didnt work. Just for the heck of it. Did it again and still same problem. Vipe4android works. Except bluetooth.
eduardmc said:
I have install viper4android. Woth ARISE and Divinebeats. Both worh for headest and speaker but on a bluetooth device like connected to my car doesnt work. The phone freeze and stutter until i disable bluetooth. Im using 3.2.7 ooslite. Any idea what im doing wrong.?
Click to expand...
Click to collapse
I have the exact same issue man!! Have you found any fix yet?
I am also having the same issue.
Got same problem samsung s4 active i9295
Everything works ok except via Bluetooth
Can anybody help us
Same for OP2
Yes, same for OP2 ... tried to disable VIPER4ANDROID and it doens't fix as well.
By the lack of resolution, I guess we are alone in the Dark ... I'll uninstall this. I prefer have my bluetooth working than the audio enhancement, which BTW was awesome
Update to the latest OOS, I use viper4android too with my Bluetooth headset and it works pretty well. I'm on open beta 15 with root, viper4android guitarhero 2.5.0.5
Konvict64 said:
Update to the latest OOS, I use viper4android too with my Bluetooth headset and it works pretty well. I'm on open beta 15 with root, viper4android guitarhero 2.5.0.5
Click to expand...
Click to collapse
How do I update to the latest OOS?
Unicorn320 said:
How do I update to the latest OOS?
Click to expand...
Click to collapse
Download the rom from download.oneplus.net then flash it on twrp or stock recovery
Need to set SELinux to permissive
If you use Viper4Arise ICEsound with bluetooth devices, you need to choose ICEsound config 2 in Aroma. It's the only ICEsound config that works well with bluetooth devices.
Hey guys,
was anybody of you able to install ViPER4Android on HTC 10 7.0 Nougat?
There is an official Nougat version released, the apk run's perfectly, nonetheless the app everytime returns that the audio drivers need to be updated/installed. After pressing "yes", my phone tells me the audio drivers were installed and I need to reboot the phone.
After the reboot the same message that there is the need to install the sound drivers?! Tried it a few times now.
And yes, my phone is rooted.
... and would you say it would make a difference to install ViPER4Android even if the Boomsound of the HTC 10 is already pretty nice?!
Thanks guys....
Hi,
It is necessary the version 2.5.0.5 and in Zip, not in Apk!
Diverse file are needed to work.
It is integrated into my Rom Pyrana NO7-0.8 with Dolby.
@+
In my honest opinion, A.R.I.S.E can do the same as what Viper4Android can do except it actually has huge device support.
I used to use it but I now don't need it due to an upgrade of the speakers I was connecting it to, works almost identically and can sometimes fix the secondary speaker that doesnt work on some ROMs. nothing third-party seems to be better optimized for boomsound though, the standard is usually the nicest sounding.
Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops
After flashed as your instructions, everything works like a charm bur only ANC not work anymore
I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated
Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app
Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.
Anybody get Dolby to install? I'm getting Api error
Should we install Unity or standard version from the official thread?
vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.
Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take