Related
I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed
BrianKuo1853 said:
I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed
Click to expand...
Click to collapse
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.
Ariac Konrel said:
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.
Click to expand...
Click to collapse
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/
BrianKuo1853 said:
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/
Click to expand...
Click to collapse
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.
Ariac Konrel said:
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.
Click to expand...
Click to collapse
Finally got it working! Thanks a lot!
Hello everybody. I have Magisk and couldn't install Viper module, neither the usual viper .zip via TWRP.
Have you been able to install any of the available audio mods on your Z2 Play?
I too am interested.
I prefer the Atmos version, ViPERAtmos 4.8 Sony Beats Universal Edition, but I don't think it's compatible with Nougat.
Any advice would be greatly appreciated!
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
I have a module called viper 4arise installed and its working very well
danielmn97 said:
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
Click to expand...
Click to collapse
Could you post a link to the download / thread that worked for you? I can try to install and make a simple tutorial for other folks.
Thanks!
Here https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 install the last stable version
Thanks! I've looked at ARISE a few times, but it seems life meant steps to install. I guess I'm going to have to bear it.
Does it sound as good at Atmos?
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
dainezi said:
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
Click to expand...
Click to collapse
That's weird, I have Viper and atmos working in my device. Previously I set SElinux permissive and installed Busybox
Oh that must be it. I have it on enforcing. Will test with permissive then. Thanks!
Well, it worked! AriSE with SELinux mode changer set to permissive.
Thanks a lot!
With Dolby and viper our speakers sound WAY better! Headphones are even more awesome!
Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops
After flashed as your instructions, everything works like a charm bur only ANC not work anymore
I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated
Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app
Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.
Anybody get Dolby to install? I'm getting Api error
Should we install Unity or standard version from the official thread?
vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.
Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take
So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.
Firebuster said:
So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.
Click to expand...
Click to collapse
They locked it down somehow I think. I have 2 threads in here asking for help but no one seems to be able to help me. For added reference, here is the error produced even when all the files are added with root to enable aptx or ldac
I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aac
to
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptXHD
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.
ClubRaptor said:
I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
to
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.
Click to expand...
Click to collapse
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful
Firebuster said:
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful
Click to expand...
Click to collapse
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!
manor7777 said:
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!
Click to expand...
Click to collapse
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date
Firebuster said:
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date
Click to expand...
Click to collapse
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before
manor7777 said:
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before
Click to expand...
Click to collapse
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.
Edit: seems to be looping these messages in catlog
Firebuster said:
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.
Click to expand...
Click to collapse
OK, so last night and this morning I have been just messing with things. I no longer crash my headphones and force them to turn off, but I still have no audio over aptx - though at least it's not crashing my headphones (Bluetooth in the phone was always OK). There is one error I'm getting and I'm not sure if its related of not, but is to do with a buffer failing to release. See my screenshots of logs (just documenting here for reference)
so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)
hatemosphere said:
so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)
Click to expand...
Click to collapse
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI
manor7777 said:
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI
Click to expand...
Click to collapse
Yeah I might move onto that too. To try to fix the Bluetooth issues. I can only assume razer excluded some of the functionality but since it's baked into android 8 I don't see why they would remove it.
Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.
linuxct said:
Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.
Click to expand...
Click to collapse
so i've just got a new update and now i'm wondering if we should try this again...
hatemosphere said:
so i've just got a new update and now i'm wondering if we should try this again...
Click to expand...
Click to collapse
Go ahead, I can't since I'm on a Pie GSI.
If anyone has an LDAC BT Headset please give this a try.
cc @Firebuster
Great news, I just spent 2 hours updating my phone, with flashing back to stock because the OTA did not want to update me since I had Magisk, then putting everything back like before.
The update did not change anything.
Tried to do my research on issues with the Razer phone before getting it, but I guess this is just one of those things you don't comprehend until actually having the device in your hands. I came from a Oneplus One on Lineage OS and am comfortable with flashing (but no experience with GSI yet).
My razer phone is stock and not rooted. Anything I can do to contribute to test getting Apt-X working? The settings says my phone is up to date (build number OPM1.171019.011-RZR-180803.6033).
Got the official Pie installed - no LDAC nor AptX still.
cubeover said:
Got the official Pie installed - no LDAC nor AptX still.
Click to expand...
Click to collapse
you installed the official pie update for the razer phone 1?
question currently running PixelOS rom and i'm rooted would like to instal a sound enhancer was going to do vipper but after watching Munchy 2021 video it looks like a pain in the azz ,and not sure if that method will work on android 13 unless changed since then what are my options ? Im rooted is their a simple instal module or something I can install ? just want to enhance the sound of a bluetooth speaker , I know this rom comes with miui headphone enhancer but it only works if you plug in head phones kind of a waste , any suggestions or help would be great!
Install Arrow and ZTE A2019 Pro Dolby Magisk Module
And bobs your uncle
Viper almost never worked good for me. Since A10 lol better to go for Dolby. I'm using the ZTE one too