Develop Bugs

maxxaudio on OxygenOS

I am wondering, if any of you use maxxaudio on OxygenOS. Yesterday Iflashed MaxxAudio-CM13-_ahmed_radaideh-STABLE-v3.1.zip and it worked great. But today I was not able to get it to do its magic again. I reflashed it, and works again, but I am wondering if someone investigated more or can point me to working version for OxygenOS.

I only used ViPer4Android as a sound enhancer. Therefore the SELinuxMode has to be permissive instead of enforcing. There are apps where you can change this like SELinuxModeChanger.
Maybe Maxxaudio changes this while flashing, but it gets reset every time you reboot your device. Had this issue in the past, it may help in your case.

Falkenhorst said:
I only used ViPer4Android as a sound enhancer. Therefore the SELinuxMode has to be permissive instead of enforcing. There are apps where you can change this like SELinuxModeChanger.
Maybe Maxxaudio changes this while flashing, but it gets reset every time you reboot your device. Had this issue in the past, it may help in your case.
Click to expand...
Click to collapse
Can u give me flash able viper4Android zip

HatRiGt said:
Can u give me flash able viper4Android zip
Click to expand...
Click to collapse
Second post, and someone is already hijacking this thread. Why?!

Hey, How about installing the SEmodechanger app and using MaxxAudio? How was the Output and Quality after the mod? I tried installing Viper4Android but faced bugs like Slow Phone, Crashing Process and No Audio Output

I like turtles, does anyone else like turtles?
Sent from my ONEPLUS A3000 using Tapatalk

rickyx32 said:
I like turtles, does anyone else like turtles?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Well they taste good.

jvybihal said:
I am wondering, if any of you use maxxaudio on OxygenOS. Yesterday Iflashed MaxxAudio-CM13-_ahmed_radaideh-STABLE-v3.1.zip and it worked great. But today I was not able to get it to do its magic again. I reflashed it, and works again, but I am wondering if someone investigated more or can point me to working version for OxygenOS.
Click to expand...
Click to collapse
How about now ? Did you find a working MaxxAudio in OxygenOS. ahrion's work don't work on mm, the other with refined GUI crashed on OxygenOS.

Best way to install Viper Audio with AcoustiX MOD?

I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed

BrianKuo1853 said:
I'm already s-offed, unlocked bootloader, on MM firmware and MM Leedroid.
Not using Android pay, so I have SuperSU installed.
Is there a way to install Viper Audio along with ZeroInfinity's sound mod without any conflict?
And also, I saw a lot of Viper variants and got a little bit confused. Which one works best with HTC 10 in your opinion?
Any help is appreciaed
Click to expand...
Click to collapse
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.

Ariac Konrel said:
As far as I know, there is no conflict.
What the ZeroInfinity's sound mod touches is only the HTC BoomSound profiles. Which also work when unmodified.
Meaning, V4A should work as normal (but will need different tuning based on whatever BoomSound profile you have selected).
I tried it once, but I didn't fancy it.
I can't say which is best, I believe that also falls on preference and what earbuds or whatever you use for audio.
Click to expand...
Click to collapse
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/

BrianKuo1853 said:
Did you installed the apk and it works well? The driver doesn't install properly on my phone :/
Click to expand...
Click to collapse
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.

Ariac Konrel said:
Nope, I flashed it.
Get the latest flashable V4A.
If you have any errors, check out this thread.
Click to expand...
Click to collapse
Finally got it working! Thanks a lot!

Sound Mod | Viper4Android | Magisk 16 |Oreo | 25.04.2018

Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.

for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works

Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .

Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.

xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.

I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.

xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.

Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops

After flashed as your instructions, everything works like a charm bur only ANC not work anymore

I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated

Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app

Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat

I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.

schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.

Anybody get Dolby to install? I'm getting Api error

Should we install Unity or standard version from the official thread?

vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great

bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)

bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.

Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take

LDAC 8.1

So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.

Firebuster said:
So I have been trying to get LDAC or apt-X working on my razer phone but it has not worked. I am on the latest stock ROM rooted with magisk (via ADB not TWRP) and with the rayglobe magisk module installed but it just stays on AAC. My headphones are Sony WH-1000XM2 and LDAC was working when using the resurrection remix ROM from the development thread but I had to uninstall the ROM due to instability and no sign of progression. Any help would be appreciated.
Click to expand...
Click to collapse
They locked it down somehow I think. I have 2 threads in here asking for help but no one seems to be able to help me. For added reference, here is the error produced even when all the files are added with root to enable aptx or ldac

I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aac
to
Code:
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptXHD
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.

ClubRaptor said:
I installed the magisk aptx&aptxHD module and modified /system/vendor/build.prop then aptx got working.
(I couldn't test with aptxHD or LDAC cos I have no compatibe device with them.)
to
This is the same parameter the magisk module set to /system/build.prop.
To guess, LDAC will may work if an appropriate value set to the prop.
Click to expand...
Click to collapse
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful

Firebuster said:
This worked to enable switching to them however now Bluetooth just crashes. I changed it to persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-ldac
Edit:
Some interesting notes. I tried a few steps to debugging including readding AAC to the list which did nothing but if I only add aptx then the Bluetooth app no longer crashes however no sound plays so I'm guessing it's the lib files that are not correct? I just used the aptx package in magisk so if there's any other that I'm missing or other suggestions that would be useful
Click to expand...
Click to collapse
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!

manor7777 said:
I still can't get it to switch to aptx (the one I want) or ldac. It still falls back to SBC usually or aac if I'm on a different speaker. Any idea what I'm doing wrong? I'm on slot a on my device, rooted with magisk and I have tried multiple aptx modules. Is there a specific build.prop editor you use? Both my speakers and headphones support it and work with other devices and I'm still getting the error I replied with above (page one)
I'm an experienced rooter, so don't be afraid to fully explain any steps I may be missing out!
Click to expand...
Click to collapse
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date

Firebuster said:
I used root explorer and changed the build.prop entries in system\vendor\. In the first place I used the root essentials build.prop editor which shows a different build.prop. other than that I literally just edited that line and that allowed me to change it. I can't think of anything else I did other than install a bunch of library files which I'm guessing you found the same ones as me because it was very limited on what was available and up to date
Click to expand...
Click to collapse
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before

manor7777 said:
OK, awesome. You rock. That got it to select aptx - now my 2nd problem, no audio! I can see in dev options and bt settings that it's showing aptx, but I get no audio (well, I get an almost click click click noise) then my Bluetooth adaptor for my headphones crashes. And it forces my headphones to turn off. I tried 3 different magisk modules for the library files, any ideas - I was getting SBC audio before
Click to expand...
Click to collapse
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.

Edit: seems to be looping these messages in catlog

Firebuster said:
Sounds like the same problem I am having. Aptx doesn't work and aptx HD and LDAC just crash Bluetooth. Genuinely have no idea where to go from here. It must be a driver or library file. Real shame it's not working.
Click to expand...
Click to collapse
OK, so last night and this morning I have been just messing with things. I no longer crash my headphones and force them to turn off, but I still have no audio over aptx - though at least it's not crashing my headphones (Bluetooth in the phone was always OK). There is one error I'm getting and I'm not sure if its related of not, but is to do with a buffer failing to release. See my screenshots of logs (just documenting here for reference)

so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)

hatemosphere said:
so basically i went your path a few days ago and dropped that idea. please post updates if you manage to get aptx\aptx hd\ldac working (Razer Phone + Sony WH-1000 XM2)
Click to expand...
Click to collapse
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI

manor7777 said:
Cc @Firebuster
So, I might be an experienced rooter (no 1 click toolkits here) I am NOT a developer. I've tried a combination of a bunch of things to try and get this to work, and nothing has!
I did however get it to work by installing a GSI (basically a rom) to the device, but even that was painful to get working (well, installed). Now running AOSP 8.1 GSI w/gapps and I flashed magisk for root. I then installed the Aptx magisk module from the built in repo and it works perfectly fine. Not sure if It's something in razer software as I'm technically more up to date now so it's not like I was using the wrong drivers.
Can't find a decent dolby atmos I can install that will work along side v4a, all the magisk modules are for android 7 or 6.
Otherwise that's the only way I have found so far, sorry guys! - benefit is, other than AOSP's ****ty camera app (use the gcam port instead), literally everything works fine, and I even get stronger vibration on a GSI
Click to expand...
Click to collapse
Yeah I might move onto that too. To try to fix the Bluetooth issues. I can only assume razer excluded some of the functionality but since it's baked into android 8 I don't see why they would remove it.

Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.

linuxct said:
Razer and their development team is already informed about this issue, and they have correctly addressed it, and all the Bluetooth issues (which were a few), in the upcoming update MR2. No ETA.
Click to expand...
Click to collapse
so i've just got a new update and now i'm wondering if we should try this again...

hatemosphere said:
so i've just got a new update and now i'm wondering if we should try this again...
Click to expand...
Click to collapse
Go ahead, I can't since I'm on a Pie GSI.
If anyone has an LDAC BT Headset please give this a try.
cc @Firebuster

Great news, I just spent 2 hours updating my phone, with flashing back to stock because the OTA did not want to update me since I had Magisk, then putting everything back like before.
The update did not change anything.

Tried to do my research on issues with the Razer phone before getting it, but I guess this is just one of those things you don't comprehend until actually having the device in your hands. I came from a Oneplus One on Lineage OS and am comfortable with flashing (but no experience with GSI yet).
My razer phone is stock and not rooted. Anything I can do to contribute to test getting Apt-X working? The settings says my phone is up to date (build number OPM1.171019.011-RZR-180803.6033).

Got the official Pie installed - no LDAC nor AptX still.

cubeover said:
Got the official Pie installed - no LDAC nor AptX still.
Click to expand...
Click to collapse
you installed the official pie update for the razer phone 1?

Is there a recommended sound effect MOD for HTC 10 8.0?

As the title,I have bad english . Please forgive me My question is simple Is there a sound mod available for HTC 10 8.0? My phone have magisk + xposed
Please help me, thank you

I'd recommend you try AINUR (https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516). Light and have customization options +support APT-X if your headphones support this

romixer said:
I'd recommend you try AINUR (https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516). Light and have customization options +support APT-X if your headphones support this
Click to expand...
Click to collapse
+1

My phone has VIPER4 installed,Can these two survive together?

TheCarFierce said:
My phone has VIPER4 installed,Can these two survive together?
Click to expand...
Click to collapse
Backup is needed
yes, but before you flash Ainur make sure you have AML installed (https://forum.xda-developers.com/apps/magisk/mod-audio-modification-library-t3745466).

romixer said:
Backup is needed
yes, but before you flash Ainur make sure you have AML installed (https://forum.xda-developers.com/apps/magisk/mod-audio-modification-library-t3745466).
Click to expand...
Click to collapse
My phone not have S-OFF
Can I use it?

There is still a problem, you can not use BUSYBOX after installing this???
BUSYBOX is very important

I am currently using Dolby Atmos (via Magisk version for OnePlus X is working without any customization) and instead V4A i'm using JamesDSP, which have one big advantage. No more background noise when processing sound. And AML ofc.

ShadoV90 said:
I am currently using Dolby Atmos (via Magisk version for OnePlus X is working without any customization) and instead V4A i'm using JamesDSP, which have one big advantage. No more background noise when processing sound. And AML ofc.
Click to expand...
Click to collapse
Can you use BUSYBOX?

Yes. Never had problems with it.

ShadoV90 said:
Yes. Never had problems with it.
Click to expand...
Click to collapse
To use the BUSYBOX version of MAGISK, still use PLAY STORE??

Ainur Sauron + V4A + Dolby/HTC Boomsound + Poweramp it's a pretty good setup

abrahamrhs said:
Ainur Sauron + V4A + Dolby/HTC Boomsound + Poweramp it's a pretty good setup
Click to expand...
Click to collapse
DOLBY built in the original mobile phone??

Does this module work for headphones??

TheCarFierce said:
DOLBY built in the original mobile phone??
Click to expand...
Click to collapse
Yup, the one which is in settings app, just make your custom profile and that's it, that boost volume and some audio improvements as well

Anybody tried this: https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-sony-xperia-xz2-sound-enhancements-t3772758 ?

it is possible to install Ainur Sauron and AML with RR final 7.1.2.

ShadoV90 said:
I am currently using Dolby Atmos (via Magisk version for OnePlus X is working without any customization) and instead V4A i'm using JamesDSP, which have one big advantage. No more background noise when processing sound. And AML ofc.
Click to expand...
Click to collapse
Hi, on which Rom you are on? Does the Dolby Atmos for Oneplus X work on Leedroid?
TIA
Regards,
Schizzo

I am on LeeDroid. In my case it works well, but i needed to turn off Dolby Headphone effects in BoomSound, because two dolby systems at once... it's not a good idea.
You can modify htc_audio_effects.conf too and remove old dolby. But as i said, it should work without editing anything.