Related
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
krulelina said:
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Click to expand...
Click to collapse
What did u flash? Can u enter recovery mode? else try going to download mode and use Odin to flash again.
thank for reply
i already try both of them...doest work at all, odin & recovery mod...both of them i already try....weird doh!!! bcoz b4 this my ace when i had problem i just flas with odin...it work...but now....worse!!! by the way thanksss man!!!
samsung logo
hi rio,my unser is no1......thanks...
Did you wipe dalvik cache, do factory reset.
Sent from my GT-S5830 using XDA
krulelina said:
doest work at all
Click to expand...
Click to collapse
DOES or DOES NOT ?
If possible, than try(AT YOUR OWN RISK!!!) to flash CWM(ClockWorkMod) via ODIN and than (do a backup before that!!!) do a full wipe. After that is done, enter Download mode and flash again.
greets
THE-E
how???
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
krulelina said:
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
Click to expand...
Click to collapse
As already suspected, this is probably a defect of mainboard. You will have to send it to Samsung Service Point. This could still be a warranty case, but from here on only Samsung can help you.
greets
THE-E
Can you enter into cwm recovery mode. If you can then I don't think there s way. Coz it'll show you tat you've rooted ur phone. If you can't then go to service center and pretend to them that you haven't even heard the word root in your whole life. Tel them that you just tried to update thru kies nd it got bricked. No other way my friend.
Sent from my GT-S5830 using XDA
Note- your phone shd be within warranty period. Then it'll be replaced. I haven't done tis. But, heard from guys who did it.
Sent from my GT-S5830 using XDA
thanks all...
yeah i guess i'll go scs...that the only ways...thanks a lot xda & xda friends.
Rio Saputro said:
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
Click to expand...
Click to collapse
krulelina said:
hi rio,my unser is no1......thanks...
Click to expand...
Click to collapse
Just for Rio.....please
Is there some other reason, as answer was No.1
Have you already pass the Samsung Logo and then restart
Click to expand...
Click to collapse
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
What I see is that she's not having problem with bricking phone, so.. no need imo..
She just need to reflash... I believe she got wrong package when flashing? Like broken package.
Try checking http://www.samfirmware.com/
get a stock rom of your country / other, and reflash it with correct settings...
That should do it
I8150olbkl1...
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
krulelina said:
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
Click to expand...
Click to collapse
Aahh... maybe it is your device's destiny...
Hopefully your device recovers fast soon..
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
Hi Irish..
Sorry for late response
I'm not going to get everybody afraid but want to make them AWARE
Basically i wanna explain more about the "BRICKING"
There are soft brick and hard brick
SOFT BRICK
Soft brick cause by bad installation :
Corrupted file
Bad flashing way
Power off while flashing
Soft brick will cause the phone wont load the OS, the characteristic are
After booting, couldn't load OS after the logo shown and keep the screen blank
After booting and get into OS, suddenly system crash and reboot
You can go thru reboot mode and download mode
This issue can be fixed by re-flashing your phone
Click to expand...
Click to collapse
HARD BRICK
Hard brick cause by:
Broken Hardware
Very-very wrong way of flashing
What really cause this ?
It's the damaged "ADB Interference Driver" that caused the device cannot give any command to system. In example your device wont reboot after flashing although ODIN has sent reboot command
Click to expand...
Click to collapse
The characteristic are:
If your hardware damaged, your system will crash all over the time meanwhile you already re-flash but it cannot fixed
Your device have a boot loop and unable to go to recovery mode
Hah.. very wrong way flashing ?
Some device (Galaxy Ace & Galaxy 3 Apollo) have firmware that included with automatically system/data/cache format. They will not experience* this hard brick because the firmware doing cleaning before flashing
Sometime user not aware of this
They just go right away then flashing, this can cause hard brick
Click to expand...
Click to collapse
How about Wonder ?
No, wonder firmware not included this command so you must clean data/system/cache first
Click to expand...
Click to collapse
How to fix this hard brick ?
Until now i didn't get any way to fix it, because it linked to damaged "ADB Interference Driver" so you cannot use any command in your device
It this happen you should go to Samsung Service Center
How to Flash Correctly (Custom ROM)
Make a full back up of your device & apps
Do full wipe on data/system/cache
Flash your latest stock ROM
Get Root access & CWM Recovery
Download your ROM correctly make sure not get corrupted
Make sure to copy it to primary SD card (no need to swap)
Make sure you have 85-100 battery or in charged with 85-100 power available
Click to expand...
Click to collapse
I hope it help
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
yewsiong said:
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
Click to expand...
Click to collapse
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
THE-E said:
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
Click to expand...
Click to collapse
I learned Cryptography System before. I know the function of Md5 check sum. It is a "digest" of host file. BUT it can only check the integrity of the file. If the original file has already corrupted before making its md5, u won't know anyway.
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
musclehead84 said:
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
Click to expand...
Click to collapse
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
jsmoof21 said:
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
Click to expand...
Click to collapse
Its not a problem as long as you flash a rom FOR YOUR PHONE.....
Did you try this?
jsmoof21 said:
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
Click to expand...
Click to collapse
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
tyler1037 said:
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
Click to expand...
Click to collapse
I just tried that and no luck. sounds like u soft bricked it. I can't get it to turn on period. The only thing that turns on is the lcd light but only for 10 seconds then shuts off. Thanks for the help though!
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
I gave up an ordered a new one lol that's the only solution I could come up with
galaxy s3 softbrick
jsmoof21 said:
I gave up an ordered a new one lol that's the only solution I could come up with
Click to expand...
Click to collapse
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Do you get a screen at all? You say you're softbricked but you also say it doesnt start up. If you are really just softbricked then you have a screen too, in which case you'll just look like an ass going to sprint because they will see you fuucked with it and laugh you out the store. If you are hardbricked then you would have just a black screen. If you have a screen, do some reading like you shouldve done in the first place and fix it yourself.
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Mine was hard bricked and it couldn't be turned on period. If yours is soft brick then you should be able to get it back into download mode but you can't get it to turn on at all, then you have a hard brick. I went to sprint and got a brand new one because they couldn't fix it either. So unless they can fix it you will have to get a new one!
Also Hard Bricked.
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
On the advice for taking the battery out and trying to get into download mode, I tried and now without my battery in I get my red light but still no luck on download mode. any advice like "tinylinux". Sorry not a noob but not a pro so whereever that middle area is is where I stand. Thanks in advance.
UNBRICK
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
pvinodnayak said:
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH OMG
I had same stuck at boot screen but could get odin download mode still this literally saved my phone thanks your awesome!
I Screwed Up
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
jonathanod said:
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
Click to expand...
Click to collapse
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
m20120 said:
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
Click to expand...
Click to collapse
why are people still doing this?
nicholaaaas said:
why are people still doing this?
Click to expand...
Click to collapse
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
WHYDavid said:
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Totally agree.That or a motorola
Try YouTubeing QBKing77 on his video for bricked S3's
Good luck. There will be a way to unbrick. Just have to find the right method.
[JellyBombed S3 via XDA premium]
Hello guys.. I have some problems about my samsung wave 2.. I think it is bricked but i m not sure.. Here you are some information about my problem:
-when i take charge to phone sometimes it says "file not found" or nothing happend..
- i tried to flash or something but nothing happend again
I read about jtag or something else but i could not understand my problem yet. Could any one help me about this case what is my phones problem how can i fix it? thank you..
mehmetdyn said:
Hello guys.. I have some problems about my samsung wave 2.. I think it is bricked but i m not sure.. Here you are some information about my problem:
-when i take charge to phone sometimes it says "file not found" or nothing happend..
- i tried to flash or something but nothing happend again
I read about jtag or something else but i could not understand my problem yet. Could any one help me about this case what is my phones problem how can i fix it? thank you..
Click to expand...
Click to collapse
Wave is hard to brick.
File not found means Fota try to find an android kernel somewhere. (I guess you had badadroid or stuff like that).
Either put a valid android kernel at the good place (depend of the fota you are using), then install android.
Or boot in download mode and flash a FULL bada firmware (one containing Bootfiles and Fota).
BenzoX said:
Wave is hard to brick.
File not found means Fota try to find an android kernel somewhere. (I guess you had badadroid or stuff like that).
Either put a valid android kernel at the good place (depend of the fota you are using), then install android.
Or boot in download mode and flash a FULL bada firmware (one containing Bootfiles and Fota).
Click to expand...
Click to collapse
But it doesn't work imm how can i say i could not start it. Yeah i had badadroid in phone micro sd. Coud you help me about fixing it ? Just say me what i should do step by step again thank you
Sometimes when i putcharging it says like that
now after some trying to get download mode it just open for a sec i see "download mode" and it turns off again..
mehmetdyn said:
now after some trying to get download mode it just open for a sec i see "download mode" and it turns off again..
Click to expand...
Click to collapse
Maybe battery empty...
Try to charge Battery...
I mean in working handset or in other ways...
Google... how to charge battery without handset or check this thread...
http://forum.xda-developers.com/showthread.php?t=2365748
Best Regards
adfree said:
Maybe battery empty...
Try to charge Battery...
I mean in working handset or in other ways...
Google... how to charge battery without handset or check this thread...
http://forum.xda-developers.com/showthread.php?t=2365748
Best Regards
Click to expand...
Click to collapse
Thanks to all i fix it finally
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
GokulNC said:
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
Click to expand...
Click to collapse
I did it same problem...
KrishuFC said:
I did it same problem...
Click to expand...
Click to collapse
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
GokulNC said:
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
Click to expand...
Click to collapse
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
KrishuFC said:
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
Click to expand...
Click to collapse
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
GokulNC said:
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
Click to expand...
Click to collapse
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
KrishuFC said:
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
Click to expand...
Click to collapse
Sorry, but I no longer have that phone
Just ask someone else.
GokulNC said:
Sorry, but I no longer have that phone
Just ask someone else.
Click to expand...
Click to collapse
Ok then! it seems nobody is gonna help me
KrishuFC said:
Ok then! it seems nobody is gonna help me
Click to expand...
Click to collapse
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
GokulNC said:
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
Click to expand...
Click to collapse
I'm trying!! lets hope
I also have same problem.. can anyone provide a solution
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Sagar Kapasi said:
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Click to expand...
Click to collapse
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
KrishuFC said:
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
Click to expand...
Click to collapse
So You Are Saying You Left That Phone Dead?
Sagar Kapasi said:
So You Are Saying You Left That Phone Dead?
Click to expand...
Click to collapse
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
KrishuFC said:
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
Click to expand...
Click to collapse
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Sagar Kapasi said:
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Click to expand...
Click to collapse
Yes give it a try why not you should go...