Related
hello
i tried to flash bada 2.0 it diddnt work ( sercurity fail ) and other problems now i got a problem my phone doesnt boot up at all i cant even join download mode its just kinda dead.
I need help guys i tried to put out the battey left it there for 1 h put it back in and it still doesnt work i dont know what to do please can someone help? i screwd up
and sorry for my bad english its just the **** i learn from shool , youtube and funnyjunk
Hehe, biggest letters: IF U DONT KNOW HOW TO FLA**** DONT TAKE THIS.
Yeah, you made a little mistake, i dont know for sure that now, but try to re-flash to 1.2 some bada version not to 2.0.1, but first know how to turn off security, becouse it can be not to late, or you get Brick or Semi-brick Good luck dude
Are you sure you can't go to download mode ?????
If yes then i announce it : time of brick 23/7/2011
you will need JTAG or RIFF box to reanimate it
**** i cant go to download mode i guess im ****ed
http://forum.xda-developers.com/showpost.php?p=15935274&postcount=102
Try other Key combo... maybe you have luck.
Best Regards
Hello, lest you accidentally tried to flash BADA 2.0 with an older version of "Multiloader" if so remove the battery of the phone put it again and start the "Download mod" with keys "Vol up" + "Lock key" + "Power on" If you start flashing again with "Multiloader 6.65"
thanks but it doesnt work any other tipps? oh and i user 5.65
JUSTMAZLUM said:
thanks but it doesnt work any other tipps? oh and i user 5.65
Click to expand...
Click to collapse
If you cannot enter to download mode then you are in big trouble... You will need JTAG to reanimate it.
**** is there nothing else i could try?
If you turn it off and put the charger in nothing happends?
If so. JTAG is only way
If not you COULD have a semi-brick but i think you still need JTAG
what if my phone can boot but it reboot everytime after juz 1 sec on the home screen. this rebooting keep continue until i took off the battery. any solution?
blazk said:
what if my phone can boot but it reboot everytime after juz 1 sec on the home screen. this rebooting keep continue until i took off the battery. any solution?
Click to expand...
Click to collapse
Trying before asking? If you've read this thread then you would know that you should try to reflash
If your phone boots as soon as you put in battery then hold
vol down + camera when you put the battery in
thanks for the help its a full brick i put out the battery and tried to recharge nothing happend.
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
krulelina said:
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Click to expand...
Click to collapse
What did u flash? Can u enter recovery mode? else try going to download mode and use Odin to flash again.
thank for reply
i already try both of them...doest work at all, odin & recovery mod...both of them i already try....weird doh!!! bcoz b4 this my ace when i had problem i just flas with odin...it work...but now....worse!!! by the way thanksss man!!!
samsung logo
hi rio,my unser is no1......thanks...
Did you wipe dalvik cache, do factory reset.
Sent from my GT-S5830 using XDA
krulelina said:
doest work at all
Click to expand...
Click to collapse
DOES or DOES NOT ?
If possible, than try(AT YOUR OWN RISK!!!) to flash CWM(ClockWorkMod) via ODIN and than (do a backup before that!!!) do a full wipe. After that is done, enter Download mode and flash again.
greets
THE-E
how???
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
krulelina said:
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
Click to expand...
Click to collapse
As already suspected, this is probably a defect of mainboard. You will have to send it to Samsung Service Point. This could still be a warranty case, but from here on only Samsung can help you.
greets
THE-E
Can you enter into cwm recovery mode. If you can then I don't think there s way. Coz it'll show you tat you've rooted ur phone. If you can't then go to service center and pretend to them that you haven't even heard the word root in your whole life. Tel them that you just tried to update thru kies nd it got bricked. No other way my friend.
Sent from my GT-S5830 using XDA
Note- your phone shd be within warranty period. Then it'll be replaced. I haven't done tis. But, heard from guys who did it.
Sent from my GT-S5830 using XDA
thanks all...
yeah i guess i'll go scs...that the only ways...thanks a lot xda & xda friends.
Rio Saputro said:
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
Click to expand...
Click to collapse
krulelina said:
hi rio,my unser is no1......thanks...
Click to expand...
Click to collapse
Just for Rio.....please
Is there some other reason, as answer was No.1
Have you already pass the Samsung Logo and then restart
Click to expand...
Click to collapse
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
What I see is that she's not having problem with bricking phone, so.. no need imo..
She just need to reflash... I believe she got wrong package when flashing? Like broken package.
Try checking http://www.samfirmware.com/
get a stock rom of your country / other, and reflash it with correct settings...
That should do it
I8150olbkl1...
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
krulelina said:
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
Click to expand...
Click to collapse
Aahh... maybe it is your device's destiny...
Hopefully your device recovers fast soon..
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
Hi Irish..
Sorry for late response
I'm not going to get everybody afraid but want to make them AWARE
Basically i wanna explain more about the "BRICKING"
There are soft brick and hard brick
SOFT BRICK
Soft brick cause by bad installation :
Corrupted file
Bad flashing way
Power off while flashing
Soft brick will cause the phone wont load the OS, the characteristic are
After booting, couldn't load OS after the logo shown and keep the screen blank
After booting and get into OS, suddenly system crash and reboot
You can go thru reboot mode and download mode
This issue can be fixed by re-flashing your phone
Click to expand...
Click to collapse
HARD BRICK
Hard brick cause by:
Broken Hardware
Very-very wrong way of flashing
What really cause this ?
It's the damaged "ADB Interference Driver" that caused the device cannot give any command to system. In example your device wont reboot after flashing although ODIN has sent reboot command
Click to expand...
Click to collapse
The characteristic are:
If your hardware damaged, your system will crash all over the time meanwhile you already re-flash but it cannot fixed
Your device have a boot loop and unable to go to recovery mode
Hah.. very wrong way flashing ?
Some device (Galaxy Ace & Galaxy 3 Apollo) have firmware that included with automatically system/data/cache format. They will not experience* this hard brick because the firmware doing cleaning before flashing
Sometime user not aware of this
They just go right away then flashing, this can cause hard brick
Click to expand...
Click to collapse
How about Wonder ?
No, wonder firmware not included this command so you must clean data/system/cache first
Click to expand...
Click to collapse
How to fix this hard brick ?
Until now i didn't get any way to fix it, because it linked to damaged "ADB Interference Driver" so you cannot use any command in your device
It this happen you should go to Samsung Service Center
How to Flash Correctly (Custom ROM)
Make a full back up of your device & apps
Do full wipe on data/system/cache
Flash your latest stock ROM
Get Root access & CWM Recovery
Download your ROM correctly make sure not get corrupted
Make sure to copy it to primary SD card (no need to swap)
Make sure you have 85-100 battery or in charged with 85-100 power available
Click to expand...
Click to collapse
I hope it help
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
yewsiong said:
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
Click to expand...
Click to collapse
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
THE-E said:
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
Click to expand...
Click to collapse
I learned Cryptography System before. I know the function of Md5 check sum. It is a "digest" of host file. BUT it can only check the integrity of the file. If the original file has already corrupted before making its md5, u won't know anyway.
Hello everyone, i have used this site for root another phones on past but now i can't understand how to fix my problem by myself. Thats why i'm here to kindly ask(beg) for help.
I tryed to root the phone, first i used the Framaroot, i thought it worked but look likes not, i'm getting the Secure booting Error! Couse: boot certification verify.
Ok, looks not a big deal, lots of guys got it and solved their problems with this post. But now is where i ask sorry because i couldn't make it.
I can enter on dowload mode, i tried all the steps on the post and did not worked. I need a light.
When i used the KDZ_FW, i got a message of error on extrating file.
When i tryed make a Recovery Hard Reset, i got the message Secure booting Error! Couse: boot certification verify.
When i try to turn it on by pressing the power + volumerdown = nothing happen.
I have a Optimus G E977, and the software was the E97710d.
Thanks for the attention.
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Maybe U can help me too.
Everything was fine with my OG but problems start when installing CM11. I decided to go back to stock later (I did it) but then couldnt be able to enter recovery or download mode. I tried several methods like re root, unlock again and lately using ROM Manager and trying to install another recover all get screwed up. Only black screen. Trying and trying I could install KDZ firmware
So then I root, unlock boatloader with method one from here: http://forum.xda-developers.com/showthread.php?t=2667398
Ok i dont know if boatloader is unlocked now but i know I cant enter recovery or download mode. Im afraid to use freegee to try to unlock again.
What should I do.
Thanks
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Fuguets said:
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
Click to expand...
Click to collapse
Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
ErnestoD said:
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Click to expand...
Click to collapse
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide: http://www.htcmania.com/forumdisplay.php?f=1026
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.[/QUOTE]
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
ErnestoD said:
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
Click to expand...
Click to collapse
[/QUOTE]
I didnt see that on XDA. I used this method with 2 kdz´s, one smaller and another one bigger than 1gb.
Maybe U missed something.
Fuguets said:
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
Click to expand...
Click to collapse
[/QUOTE]
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Fuguets said:
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Click to expand...
Click to collapse
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
ErnestoD said:
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Click to expand...
Click to collapse
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Fuguets said:
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
Click to expand...
Click to collapse
I did not overwrite that folder, maybe we are looking for different guides because if that was something that i supose to do i didn't saw that on the guide.
I did not edit hosts file.
I restarted the computer now again, and now my message is: device not found.
Can you place the link of exacly guide i need to look ? Couse the link you send me before has a various of them.
ErnestoD said:
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
ErnestoD said:
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
Click to expand...
Click to collapse
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Edit1: I foun this guide, do you think it could help me ?
But I didn't understand that well, looks like I need to be able to start the OS of the phone, which i can't.
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Fuguets said:
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Click to expand...
Click to collapse
ErnestoD said:
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Click to expand...
Click to collapse
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Hello guys,
I am so happy that I wanted to share this with you. As I still have headache from googling how to flash back your stock rom (which didn't work out because the flash tool gave an error every time at 15%), I can save you a lot of headache with this very very simple fix.
For some people the tool works just fine, but when you have some google bootloader or a newer freegee unlocked one and you want back to stock, lots of people cant follow this thread because of the error at 15%.
The fix is EASY and I found it on the Optimus L9 section, thanks to that guy on XDA.
Follow exactly Davevinci's great thread except for one thing:
http://forum.xda-developers.com/show....php?t=2498102
Step 4 is now:
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON PRESSED+CONNECT USB
But step 4 should be:
- Boot up your phone in any stock based rom, for example SAVVY Rom V5
- Enable USB debugging and connect your phone through USB using the LG PC Suite option (make sure to kill PC suite in tast manager).
Now you should see the driver installation of LGE Android MTP device as usual and then just run the flash tool from the guide. Also de mode DIAG is now the right one. The flashtool will reboot your phone to download mode automatically when it's needed.
Still an error? Don't worry, disable virus scanner and firewall and just reconnect your phone. I got an error one time, during flashing, but I followed the steps the flashtool suggested me and now everything went fine.
Click to expand...
Click to collapse
The link U provide is not working and U didnt upload any log, I didnt see it.
As I read to perform that action u must be able to turn on your phone.
Did U try to flash a smaller then 1gb kdz or try another ones.
As U can see U wont receive to much help in LG forum. There are good guides but on time help is another thing.
Did U try this guide (method 1): http://forum.xda-developers.com/showthread.php?t=2667398
Is your phone properly detected in your PC?
Fuguets said:
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Click to expand...
Click to collapse
I did not tried with a smaller archive because I can't download it. Among the Brazilian files I only can download the version 10D. I am on phone now but I will send the link that I'm trying asap. I really appreciate your help man. Even that I didn't found the solution yet is nice count with some experience help.
Enviado de meu XT1032 usando Tapatalk
Edit: From this list http://forum.xda-developers.com/showthread.php?t=2093382 , all brazilian links show Access Denied
And from here http://lg-phone-firmware.com/index.php?id_mod=20, only the V10D of Brazil.
I'm looking for the number 16, CLR/CLARO(BRAZIL) which is less than 1GB. Maybe i'm wrong, but when i clic on the name, a page of TNY shows a link of ADFLY that after i clic on close advertisement nothing happen.
About the method 1, I did try that, but sometimes it says "device not found" or "the system cannot find the patch specified". I'll try that from another computer, i let you know if i have some lucky. But the guy of the guide said:
!enable usb debugging
connect as MTP
follow the script"
Maybe its not for me.
Look what happen. (I'm using download mode)
*********************************************
* Tool Unlock BL Optimus G - Update 0414 *
* *
*********************************************
*** Select a number ***
1. UNLOCK BOOTLOADER
Seclect a number : 1
1. [Unlock] Optimus G JB 4.1.2 Selelct
Seclect a number : 1
FreeGee UNLOCK
Thanks to Team Codefire
1. JB 4.1.2
╣Seclect a Number : 1
1. KT
2. SKT
3. LGU+
╣Seclect a number : 1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
Unlock BL success.
╕Reboot [y]/[n] :
About my phone get propper detected, i guess it is, at least on my devices map it shows "Lg AndroidNet Phone"
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
GokulNC said:
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
Click to expand...
Click to collapse
I did it same problem...
KrishuFC said:
I did it same problem...
Click to expand...
Click to collapse
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
GokulNC said:
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
Click to expand...
Click to collapse
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
KrishuFC said:
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
Click to expand...
Click to collapse
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
GokulNC said:
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
Click to expand...
Click to collapse
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
KrishuFC said:
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
Click to expand...
Click to collapse
Sorry, but I no longer have that phone
Just ask someone else.
GokulNC said:
Sorry, but I no longer have that phone
Just ask someone else.
Click to expand...
Click to collapse
Ok then! it seems nobody is gonna help me
KrishuFC said:
Ok then! it seems nobody is gonna help me
Click to expand...
Click to collapse
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
GokulNC said:
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
Click to expand...
Click to collapse
I'm trying!! lets hope
I also have same problem.. can anyone provide a solution
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Sagar Kapasi said:
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Click to expand...
Click to collapse
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
KrishuFC said:
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
Click to expand...
Click to collapse
So You Are Saying You Left That Phone Dead?
Sagar Kapasi said:
So You Are Saying You Left That Phone Dead?
Click to expand...
Click to collapse
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
KrishuFC said:
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
Click to expand...
Click to collapse
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Sagar Kapasi said:
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Click to expand...
Click to collapse
Yes give it a try why not you should go...