Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
Related
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks
I bet Google knows.
Sent from my Apple IIe
SamMobile is a great site for firmwares.
After the screen turns on, let go of power and continue to hold up and home. Try it out.
johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!
hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
datbager said:
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
What spetps I need to do to re flash previous bootloader?... im in 4.3
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I did not do any boot loader flashing. sorry wow first question and I already fail.
If I had to take a wild guess and you still have access to cwm or twrp flash the stock rom and you should be good.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
If you go from the 4.3 bootloader to a previous one, you will brick your device via an e-fuse. You shouldn't need to revert to an older bootloader anyway unless for a specific rom. If that is the case, you are better off waiting until the developer catches up.
datbager said:
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
Click to expand...
Click to collapse
Also, please don't use anything off this page unless you have an international version of the S3. I am guessing you have the I747, DO NOT FLASH SOMETHING NOT MADE FOR YOUR PHONE! :highfive:
Here is where you need to start...http://forum.xda-developers.com/showthread.php?t=2321310
There is even a PSA in red letters about reverting from a 4.3 bootloader.
datbager said:
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
how do you create a debrick.img? My phone is in working condition but I just want to be prepared for down the road
Pretty sure I bricked it
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
thenowherekid said:
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
Click to expand...
Click to collapse
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
thenowherekid said:
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
Click to expand...
Click to collapse
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
datbager said:
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
Click to expand...
Click to collapse
Thanks.
Sudden Death AT&T GS3
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
thenowherekid said:
Thanks.
Click to expand...
Click to collapse
ok this is not for your device but it is a guide and you can look up a kid that has a video on youtube. scroll down to device firmwares and select your model. but this is the link to help you. http://forum.xda-developers.com/showthread.php?t=2369125
your help
IcemanReturns said:
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
Click to expand...
Click to collapse
once again not for your device but scroll down to stock firmwares and READ the whole guide. There is a kid that makes a video some where arround here as well. http://forum.xda-developers.com/showthread.php?t=2369125 you need a 16gb class 10 sdcard or larger as well for this
Disk Space Back
I had trouble getting my max disk space after I did the debrick trick. So i'm going to shoot a quick tip to get all your space back.
go to your windows start menu and in the search type diskpart and hit enter.
in the command line type "list disk" no quotations and enter.
You should see your hard drive and any other storage devices connected in you computer. Determine which one is the sd card.
Next in the command line hit select disk x. x represents your sdcard.
last is clean disk in command line and your sd card has all its space but you must reformat it how ever you choose.
I just used sd formater.
hope that helps some peeps if so hook a noob up with some thanks clicks. :good:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hmm
trug2002 said:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
datbager said:
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
Click to expand...
Click to collapse
Can you help me with this? I copied my thread :3
LiLTrippz said:
*I bought this off a friend of mine.*
All he told me was that he tried installing a rom and he thinks that he installed a rom for a different model S3.
What Happens/What I Did?
1. I tried to plug it into the computer and the computer doesn't show that anything plugged in, the S3 doesn't turn on. NOTHING.
2. I connected the phone to the PC without the battery inside and the phone responds with one RED light at the top left of the phone. Nothing shows up on my computer still, not even that the phone was connected NOTHING.
3. I bought a JIG device and tried plugging it into my phone and it doesn't work. (I previously tested this JIG on another samsung device and it worked)
4. I tried doing the method to use a 16gb SD card and downloading an i747m debrick IMG and using Win32FlashTool to copy it to my SD Card. I tried with 2 different cards the first one was a 16gb SD card and the other was a 32gb SD card.
5. Through a lot of research I found a leaked way to unbrick the Samsung Galaxy S3 i9300 by shorting out the R313 chip, I'm sure you guys are all aware of this method. I opened my device and couldn't find the R313 chip. After further research I found that a user was able to locate the R313 chip on the i747m and he'd unbricked his phone with that method. If anyone can help me locate the i747m R313 chip it'd be GREATLY appreciated!
If anyone can help me out it would be great! I'm very experienced at soldering so if there's a method that requires me to solder I'm more than confident I can do it.
Thank you!! :good:
Click to expand...
Click to collapse
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
trug2002 said:
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am not an expert but I'm pretty sure you need the mjb2 but there are guides all over that point misleading information. I can post a link that I believe is helpful. And as always I take no credit just pointing a finger here.
http://www.usofttech.com/t51443.html
:good:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??
Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help
dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,
Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you
Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.
Can I unroot in the future if I want to go back to stock?
Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN
Thank you. One last question, any chance using Odin will brick the device?
Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.
Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
What exactly were you trying to do? I mean normally you hook up old phone and use smart switch to update new phone. So why was you connected to a PC? It does sound like you bricked it.
So now you probably need to flash the ROM.
I read that smart switch is a good and valid source to check for updates. I never thought that an official Samsung software can be so bad at something so basic, resulting in bricking my phone...
Stop using smart switch to update your phone. You haven't hard bricked it because you still have recovery. It's called a soft brick. Download Odin 13.3_3B from here on xda. Do not use the 13.4 because it's suspected to have a fishy call back to a server from a dll that's in the program folder. Download the atch firmware for your model from sammobile or get it in this s20 ultra forum. You should be able to flash the new firmware.
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Julius_GER said:
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Click to expand...
Click to collapse
Odin uses official firmware from Samsung so no warranty voided.
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
What kind of USB Port did you use?
Try again using a USB 2.0 port, Samsung always had problems with it's software and USB 3.0 ports.
Use USB 2.0 and try again.
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
klantee said:
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
Click to expand...
Click to collapse
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Geekser said:
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Click to expand...
Click to collapse
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
klantee said:
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
Click to expand...
Click to collapse
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
Hey Julius, did you get your phone to work. I am having the same issue.
Update:
I am good now. I was using the thunderbolt cable that came with the phone and update would get stuck at the same point everything with odin 3.13 and 3.14.
I used a USB 3 to thunderbolt cable that I had from an older phone and it work.
What I used:
Windows 10 x64 1909
USB 3 to thunderbolt cable
USB driver downloaded from Samsung support. I think it is the same driver that comes with smart switch because when I installed it, it prompted
to reinstall driver.
Odin3 v3.13.3_3B_PatcheD from here https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. ( I think 3.14 will work too.
I really think the cable was the only problem)
Firmware downloaded with SamFirm
klantee said:
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Click to expand...
Click to collapse
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
ASHLEY117 said:
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
Click to expand...
Click to collapse
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
klantee said:
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
Click to expand...
Click to collapse
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
ASHLEY117 said:
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
Click to expand...
Click to collapse
Tried your suggestion with no joy. Will keep trying though as I feel this issue can be cracked. Many thanks...
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
klantee said:
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
Click to expand...
Click to collapse
Glad I could hel;p- I know how frustrating it is when things seem like you can never get things to work - anyway - best of luck - and be sure to hit thanks If I helped you.
Hi Do you lose your data (vids and pics) via this method? i have had same thing happen on my s20+