Develop Bugs

Galaxy note 2 WONT BOOT!!!

Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.

englishguy26 said:
Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.
Click to expand...
Click to collapse
Do you have a nandroid available? Otherwise I'd advise that you use Odin and go back to full stock
Sent from my SPH-L900 using xda app-developers app

englishguy26 said:
Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.
Click to expand...
Click to collapse
Odin back to stock

skw5115 said:
Do you have a nandroid available? Otherwise I'd advise that you use Odin and go back to full stock
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?

englishguy26 said:
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?
Click to expand...
Click to collapse
Download the toolkit:
http://forum.xda-developers.com/showthread.php?t=1957155
Choose to download factory image and flash through Odin.
Download mode is volume down+home button and hold power button together untill Galaxy Note2 screen comes up, the let go.

englishguy26 said:
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?
Click to expand...
Click to collapse
Follow Jed instructions above but in the future please make a backup(nandroid) in recovery so you can restore if necessary.

Note 2 wont boot up
Jed Dignazio said:
Download the toolkit:
http://forum.xda-developers.com/showthread.php?t=1957155
Choose to download factory image and flash through Odin.
Download mode is volume down+home button and hold power button together untill Galaxy Note2 screen comes up, the let go.
Click to expand...
Click to collapse
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Chainfire 3D doesnt work on Galaxy Note 2, unfortunately.

joeyakascar said:
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!
Click to expand...
Click to collapse
http://www.sxtpdevelopers.com/showthread.php?t=74
Download and instructions to get you back to LJC stock.

joeyakascar said:
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!
Click to expand...
Click to collapse
If you can still get into Download Mode you can always flash the stock rom back using the Odin tool on your PC. Use the procedure below to get into download mode:
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be requires to press volume up to enter the download mode or volume down to cancel and reboot the device.
Then follow these instructions:

If u have a custom recovery there's always this http://forum.xda-developers.com/showthread.php?t=2086769
And sadly yes cf3d does not work on any device with touchwiz jellybean

What I did in that situation is first download a stock deodexed rom.
Then connect your phone with your pc and open the Odin program on your computer.
(may or may not have to install Kies)
Then flash the deodexed rom to your phone.
Sent from my SPH-L900 using JellyBombed Tapatalk 2

I think i Brick my Note 2 any help ?

Hello i think i brick my phone .... i run Triangle Away everything went fine and when i went to wipe data ... my phone turned off and wenn I try to turn it ON it only shows me Samsung Galaxy Note II GT-n7100 ... and I cant go to recovery or download mode .... it just stays on the logo .... is there anything that i can do ?

beko723 said:
Hello i think i brick my phone .... i run Triangle Away everything went fine and when i went to wipe data ... my phone turned off and wenn I try to turn it ON it only shows me Samsung Galaxy Note II GT-n7100 ... and I cant go to recovery or download mode .... it just stays on the logo .... is there anything that i can do ?
Click to expand...
Click to collapse
If you do a battery pull and hold down volume up the home key and the power button you CANT get into recovery?

Adam1422 said:
If you do a battery pull and hold down volume up the home key and the power button you CANT get into recovery?
Click to expand...
Click to collapse
Yes i cant go to recovery mode or to download mode ... some people said that it is not brick but i really dont know what is happend ... ((

plug it into your computer and see if you can get abd to recognize it. If you can, run adb reboot recover

shiftr182 said:
plug it into your computer and see if you can get abd to recognize it. If you can, run adb reboot recover
Click to expand...
Click to collapse
the problem is that my Note II dosent appear on pc ... PC show that there is connected USB ... but Phone dosent show up

beko723 said:
the problem is that my Note II dosent appear on pc ... PC show that there is connected USB ... but Phone dosent show up
Click to expand...
Click to collapse
Do you see any missing/unknown devices in Device Manager?
If so you might just need to download an updated USB driver from Samsung's website.

I'm having this exact same issue. I hope there is someone that can help figure this out. Mine occurred while trying to reroot after the update.
---------- Post added at 12:30 AM ---------- Previous post was at 12:21 AM ----------
If it helps, this is what I did.
After successfully rooting my husbands phone, he accidently updated. I've waited to try and do re-route it now since you've published a method of re-rooting. This was my first attempt at rooting ever and currently the phone only powers on to the Samsung Galaxy Note 2 screen and doesn't go any further. Here's what happened:
On Windows 7
Opened CASUAL
Received instructions to flash root.
Using Odin I tried I605_VRALJB_Restore.tar.md5, it failed to flash so I instead flashed root66_VZW_stock_system.tar.md5.
This worked fine, proceeded with CASUAL
Flashed BAVBaseline.tar.md5.
Phone began to reset and froze at Samsung Galaxy Note 2 starter screen. Waited 5 minutes no change in the screen on the phone or on CASUAL. After 30 minutes pressed power and the buttons to get into Odin, I finally unplugged. The phone is still stuck at the start screen and isn't recognized by Odin or my computer

So you're on a Verizon GN2? Just want to make sure we're talking the same phone
Also did you pull the battery yet?
Sent from my SPH-L900 using Tapatalk 2

Okay that has happened to me before.
I had to download a new stock rom and flash it via TWRP.
If you dont have TWRP Recovery mode, find a rom you can flash in normal recovery.
(To get to recovery mode, take battery out of phone, put back in and then hold "volume up, power and home button simultaneously for about 10 seconds.")
Once you have the new rom .zip file downloaded...
You have to take the SD Card out of the bricked phone and place in a different phone.
Put the different phone on the computer and put the rom on there.
When it gets copied to the ext sd, put it back into the bricked phone and proceed into recovery mode as I explained above.
You will probably have to factory reset, and then install the new rom onto the bricked phone from the ext sd card.
If you have any questions just post.
Hope it helps.
Sent from my SPH-L900 using xda premium

devynbf said:
Okay that has happened to me before.
I had to download a new stock rom and flash it via TWRP.
If you dont have TWRP Recovery mode, find a rom you can flash in normal recovery.
(To get to recovery mode, take battery out of phone, put back in and then hold "volume up, power and home button simultaneously for about 10 seconds.")
Once you have the new rom .zip file downloaded...
You have to take the SD Card out of the bricked phone and place in a different phone.
Put the different phone on the computer and put the rom on there.
When it gets copied to the ext sd, put it back into the bricked phone and proceed into recovery mode as I explained above.
You will probably have to factory reset, and then install the new rom onto the bricked phone from the ext sd card.
If you have any questions just post.
Hope it helps.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Yes.. but rhey mentioned Verizon which the locked bootloader can be bad news. We don't have that with Sprint.
Sent from my SPH-L900 using Tapatalk 2

Oh dang, didnt know Verizon had locked bootloader.
Why the heck would VZW do that, that's just messed up man...
Sent from my SPH-L900 using xda premium

And casual was mentioned. If you used casual on a sprint phone then you probably bricked it.

i have the same issue....here's what i did..
yesterday night i had rooted with samsung tool kit..flashed twrp and supersu with it. It worked fine ..was able to boot(the flash boots it ..didnt try manual booting)
today morning i had installed a icon pack from minimo icons.. it got stuck and wasnt working .,..so pulled the battery and booted and its stuck at samsung logo.. pls help!!
BTW I was able to go to recovery .. but dont know what to do from there... ! I didnt have a back up since i didnt want to keep the junk I had accumulated. I can go factory settings if thats what it takes

http://forum.xda-developers.com/showthread.php?t=2086769 If you can access recovery than flash this

billard412 said:
http://forum.xda-developers.com/showthread.php?t=2086769 If you can access recovery than flash this
Click to expand...
Click to collapse
so somehow move the 867mb file to the sd card and then flash it with recovery .. after wipe data/factory reset? thats about it ?
btw i m on sprint

That's exactly right

billard412 said:
That's exactly right
Click to expand...
Click to collapse
Alright.. giving it a go .. lets see.. fingers crossed
UPDATE: IT WORKED AND FULL ON STOCK RIGHT NOW. Thanks!
Now I need to figure out what went wrong cos I cant stay stock for long and dont want to keep doing this again and again...

Removed...I figured it out. Thanks so much y'all.
(editx2)
Just in case someone comes along like me and the above doesn't work for them.
Was getting stuck at second "Samsung" screen, could not flash rom via Odin or by recovery...couldn't even get to recovery at first.
After much round and round, here's the winning combination:
Flash stock recovery via Odin, flash twrp 2.3.1.1 (newest one with .tar file I could find) via Odin, then flash stock rom...Was that simple for me, just a lot of trial and error.

Help with bricked Note 2

Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC

AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe

billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!

AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe

billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks

I bet Google knows.
Sent from my Apple IIe

SamMobile is a great site for firmwares.

After the screen turns on, let go of power and continue to hold up and home. Try it out.

johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!

AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link

when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....

wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!

hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about

bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.

hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck

[Q] And I mannage to soft brick....

Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473

maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.

You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.

maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?

lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again

all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again

lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.

maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed

Good luck :good:

maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s

DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:

lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.

porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again

lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards

porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?

maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards

Question about tmobile G95TUVU3DOI1

Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you

Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.

Can I unroot in the future if I want to go back to stock?

Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN

Thank you. One last question, any chance using Odin will brick the device?

Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.

thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.

eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.

Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.

godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.