Develop Bugs

Hard Bricked Sprint Galaxy s3 Need Help!!!

So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???

If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII

musclehead84 said:
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
Click to expand...
Click to collapse
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.

jsmoof21 said:
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
Click to expand...
Click to collapse
Its not a problem as long as you flash a rom FOR YOUR PHONE.....

Did you try this?
jsmoof21 said:
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
Click to expand...
Click to collapse
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.

tyler1037 said:
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
Click to expand...
Click to collapse
I just tried that and no luck. sounds like u soft bricked it. I can't get it to turn on period. The only thing that turns on is the lcd light but only for 10 seconds then shuts off. Thanks for the help though!

If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds

18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
I gave up an ordered a new one lol that's the only solution I could come up with

galaxy s3 softbrick
jsmoof21 said:
I gave up an ordered a new one lol that's the only solution I could come up with
Click to expand...
Click to collapse
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks

bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Do you get a screen at all? You say you're softbricked but you also say it doesnt start up. If you are really just softbricked then you have a screen too, in which case you'll just look like an ass going to sprint because they will see you fuucked with it and laugh you out the store. If you are hardbricked then you would have just a black screen. If you have a screen, do some reading like you shouldve done in the first place and fix it yourself.

bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Mine was hard bricked and it couldn't be turned on period. If yours is soft brick then you should be able to get it back into download mode but you can't get it to turn on at all, then you have a hard brick. I went to sprint and got a brand new one because they couldn't fix it either. So unless they can fix it you will have to get a new one!

Also Hard Bricked.
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
On the advice for taking the battery out and trying to get into download mode, I tried and now without my battery in I get my red light but still no luck on download mode. any advice like "tinylinux". Sorry not a noob but not a pro so whereever that middle area is is where I stand. Thanks in advance.

UNBRICK
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3

pvinodnayak said:
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH OMG
I had same stuck at boot screen but could get odin download mode still this literally saved my phone thanks your awesome!

I Screwed Up
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan

jonathanod said:
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
Click to expand...
Click to collapse
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.

m20120 said:
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
Click to expand...
Click to collapse
why are people still doing this?

nicholaaaas said:
why are people still doing this?
Click to expand...
Click to collapse
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app

WHYDavid said:
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Totally agree.That or a motorola

Try YouTubeing QBKing77 on his video for bricked S3's
Good luck. There will be a way to unbrick. Just have to find the right method.
[JellyBombed S3 via XDA premium]

Stuck on Samsung screen

I saw a couple people had the same issue that im now having but none of there solutions solved my problem
i wiped my GS3 for ATT tried to go back to a stock with root rom and when it rebooted it now just hangs at the samsung logo at boot tried re-flashing via odin with no luck also tried flashing a CWM.tar since i cant get into stock or CWM recovery to flash from there is there something im missing i know its late and maybe my brain isnt working like it should

Solved the problem myself.....and rather then just say i figured it out ill share how i did this since i watched countless videos and read endless amounts of threads and since none of them helped mem
First also try t put your phone into stock recovery mode and wipe your phone then flash this should take care of things if it doesnt try what i tried below
and i hope this can help someone else out there who has the same problem that i had all you have to do is the following i did this with obviously an AT&T model should work with others but as always try at your own risk.....
First make sure your battery has a charge even if its stuck on the boot screen its still charging....
then download KIES from samsung update it and make sure you have the latest version.
Next plug in your phone if your stuck at the samsung screen your computer will recognize your phone still at least it did with mine.
Once your done with the above open up KIES goto the top and then TOOLS and Firmware upgrade click on that enter your phone model (ATT SGH-I747) i dont get this part but next it will ask you for your SN and for some reason it doesnt recognize the SN use your IMEI
Now it should ask you a couple questions tell you its wiping your device and you will lose everything etc.....but then it will download the latest FW and begin to install everything and in about 20-25 mins everything will be back to stock

Nvm.. misread.

I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.

dbdynsty25 said:
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
Click to expand...
Click to collapse
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??

yearziro said:
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
Click to expand...
Click to collapse
Yes, all drivers are installed because that's how I ODIN flashed it in the first place! Just stuck on the damn Samsung screen and I can't get Kies to connect to the phone. Not in Download Mode or when it's just stuck on that screen.

you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....

whit3gh0szt said:
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
Click to expand...
Click to collapse
Worked, thanks! I appreciate it.

it doesnt work on mine
dbdynsty25 said:
Worked, thanks! I appreciate it.
Click to expand...
Click to collapse
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"

me neither
mkstf said:
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
Click to expand...
Click to collapse
Yeah I can't get into recovery either, and its getting really annoying.

indieslap said:
Yeah I can't get into recovery either, and its getting really annoying.
Click to expand...
Click to collapse
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons

xBeerdroiDx said:
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
Click to expand...
Click to collapse
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.

cabato said:
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
Click to expand...
Click to collapse
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you

xBeerdroiDx said:
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
Click to expand...
Click to collapse
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.

cabato said:
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
Click to expand...
Click to collapse
Sounds like you need to clear your cache partition and clear your dalvik cache. There are several guides on this site to help you. Choose the one that is most appropriate to what you are trying to do and follow it EXACTLY. There is one to start. Follow it from the beginning.
http://forum.xda-developers.com/showthread.php?t=2042775

When nothing else works start over from search. You cab use download mode? First make sure you got right drivers as that can mess up Odin. Use one in my Sig if you want. Then flag stock recovery with root someone nice will part a link to it I'm on my phone can't do it. Well fix your phone
Sent from my SGH-I747 using xda premium

allow rldcess
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"

Bump
Sorry, I really need help for this. I can't install the MTP drivers even through using some of the tips on this site. That seems to be the problem with me accessing the phones storage from my computer. Does anyone have an ideas for what else I could do? Should I just take it to the store and hope they can fix it?

cabato said:
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Click to expand...
Click to collapse
go to your device manager on your computer, locate samsung drivers for your device, uninstall them
restart your computer
then plug in the phone and lets it reinstall by itself

Use my drivers in my signature
They are last good damaging drivers. Don't update them but install them and plug phone in with no internet. after install plug internet in. There good stable drivers
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] S3 won't stay booted.

I can get into recover,download mode, or the rom boot screen but phone turns off right after. It won't stay on long enough to change roms or backup anything. Does anyone have any suggestions of what to do? Thanks in advance

Can't not can...stupid tablet won't let me edit.

Please Specify your Rom and Kernel. If on Stock, do a factory reset.

Perseus71 said:
Please Specify your Rom and Kernel. If on Stock, do a factory reset.
Click to expand...
Click to collapse
I'm on Cyanogenmod with stock Kernel from Cyanogenmod, never changed my kernel. It was working fine for months then just rebooted on its own and won't stay on since. Unfortunately I'm stock and I'm not even sure it will stay on long enough to do anything to it.Its also not the battery. This video shows exactly whats happening to mine. https://www.youtube.com/watch?v=J61jghxz-Vc

If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.

Perseus71 said:
If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.
Click to expand...
Click to collapse
That's the problem I can't. Is there any other options. I'm not worried about backups or anything I just want it fixed.

The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?

Perseus71 said:
The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?
Click to expand...
Click to collapse
Yeh I've tried recovery and download. Neither one stays on for more than 5 seconds and in download mode after clicking up to go into download mode the phone restarts.

Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?

Perseus71 said:
Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?
Click to expand...
Click to collapse
Trying to find it now. Can you point me in the right direction with a link??

Pivo99 said:
Trying to find it now. Can you point me in the right direction with a link??
Click to expand...
Click to collapse
Here you go.

Perseus71 said:
Here you go.
Click to expand...
Click to collapse
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?

Pivo99 said:
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?
Click to expand...
Click to collapse
I got the phone to boot into cyanogenmod but in the set up screen it failed again. Really getting annoying and I can't figure out how to fix it.

Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.

DocHoliday77 said:
Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.
Click to expand...
Click to collapse
YES thats it I was thinking there might be a problem with the power button...Is there a fix on this or a thread anywhere?

There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.

DocHoliday77 said:
There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.
Click to expand...
Click to collapse
Found a few posts and people just thump around the general area of the power button and that seems to be a temporary fix and it worked for me for a little while. It's gonna work long enough to revert everything to stock and send in. Thanks you two for your help

[Q] no service after root, trying to get my regular phone bacl

I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE

Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk

ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??

Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue

Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.

ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help

dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.

ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?

dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.

ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?

ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)

ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,

Question about tmobile G95TUVU3DOI1

Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you

Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.

Can I unroot in the future if I want to go back to stock?

Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN

Thank you. One last question, any chance using Odin will brick the device?

Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.

thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.

eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.

Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.

godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.