Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks
i_heart_3t said:
Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks
Click to expand...
Click to collapse
Otterbox
Spigen OnePlus 3T Case Rugged Armor : https://paytm.com/shop/p/spigen-one...k-k03cs20615-MOBSPIGEN-ONEPLSPIG245649E6B52A8
you'll get a 20% cashback on paytm. It's available on all other websites without the cashback.
vijaynelaturi said:
Otterbox
Click to expand...
Click to collapse
loved that one highlighted at official oneplus site but way to exp
here are some recommendations,,
#2, #9, #10
http://www.myandroidphone.in/2017/01/oneplus-3t-back-cover-cases.html
I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.
Spigen's Rugged Armor case won't protect anything, it's a visual only improvement, there isn't even any padding on the corners.
Otterbox is the best protection you can get but it is a lot bulkier in your pocket.
Look on YouTube for drop tests with otterbox cases, there are people dropping them from the third floor of buildings with only light scratches.
IF u want transparent, nothing better than this exsits quality and looks wise
http://www.amazon.in/OnePlus-Spigen-Hybrid-Crystal-K03CS20616/dp/B01H3PF2AM
u get it cheaper here
https://paytm.com/shop/p/spigen-one...ar-k03cs20616-MOBSPIGEN-ONEPLSPIG2456446710B2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
available in 524 on Paytm.
Amazon it's 900
Sent from my Redmi Note 3 using Tapatalk
I am using the Original Glass screen protector along with the Original case as shown in the video here:- https://www.youtube.com/watch?v=ks4Zn9Pe-ls
Let me know how you like it!
try the spigen armor with carbon fiber it's matte back and has a pretty sleek design found one on ebay for 15$ but the one downside to the case is that it has these bumps under the hardware button covers which constantly puts slight pressure on the power button which caused a problem on older samsung devices with turning off on its own later down the road. to fix this problem I just took a file and pliers and removed the bumps that were under the hardware button covers. this can be done on all cases to prevent any chance of the phone have a problem with turning off on its own later
I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these
samsexy98 said:
I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these
Click to expand...
Click to collapse
i am using spigen myself, the cut outs r perfect, No issue whatsoever in plugging anything!
ONEPLUS official Ebony back case.
no bulk and looks amazing.
not much protection though, just for the looks.
NirajGajjar said:
I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.
Click to expand...
Click to collapse
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?
grasshop3r said:
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?
Click to expand...
Click to collapse
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.
NirajGajjar said:
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.
Click to expand...
Click to collapse
Thanks! I'll get just that one. I anyway have some oneplus store credits
I'll keep the company provided, pre-applied screen protector ON till it lasts. Then I'll keep the screen bare. Just the back cover will be good.
This is my first OP device and will be my first purchase through the OP India store.
Try the cruzerlite bugdroid covers they are good
Related
http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one
Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.
goofball2k said:
Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.
Click to expand...
Click to collapse
could you please take some pictures of it with your phone in it?
no_username_available said:
http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one
Click to expand...
Click to collapse
Here's a video to it if it helps....
If anyone has got the case pictures of it would be super helpful.
thanks i just wished it didn't expose any of the silver trip on the bottom or top. I ordered a diztronic instead
Orzly Fusion on my Bamboo OPO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's something strange, something wrong on this case...
Just an update, I stopped using the Orzly Fusion case, even on the Bamboo the case is loose (or maybe because it's on the Bamboo and it's thicker so it's not hugging the phone properly).
posted this on google+ originally
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr
bigballa said:
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr
Click to expand...
Click to collapse
Clench your phone, as if you're trying to compress the lips over your phone sides, you will feel like it has movement as if it really is loose.
I found the same thing. Fit is nowhere near as snug as I would have liked it to be, and I would have much preferred a bit more lip for screen protection.
I just received this too. It's an okay case.. NOT a fan of clear rears. But for 5 bucks not bad.
...
Iv had this for about 2 weeks. i love the case. I believe bigballa on the xda community has posted some really helpful pics. The fitting around the sides is perfect and access to all ports is spot on as well. Iv read some odd amazon reviews but i really cant fault this case. Shows the back of my phone nicely whilst offering great protection
kind of glad i got the diztronic instead, is recommend it I might pick up the fusion later on
Remove back Plastic
Hi,
Same here seems that it is realy thinn and not so protective. We will see after some drops (I hope It will not happen soon).
I remove all the plastic back part (with a dremel: Grinding and Cuting head) to preserve the sandstone back feel of the phone and to keep the weight down. Its is quite good, the case is still well in place, not so loosy. There is a litle loose in the midle of the long border. If I redo this operation I will keep a litle platic stripe between the midle of the long borders.
I will try to cut the back of an Diztronic case to compare the overall rigidity.
Regards,
+ 9h nilkin tempered glass screen protector
I've had the clear version of this case for about a couple months and have dropped it several times. No damage, just some small chips on the edges of the nilkin tempered glass screen
I have the case about 5 days, but I send it back, there are some problems with it.
First the polycarbonat back scratches really easy and looks bad, second is the case not fits at the top and bottom, so there can enter a lot of dust.
I can not recommend this case
The back transparent easy to scratch. Demmittt.
I actually really love this case. It is much slimmer than the ringke fusion and actually maintains the shape of the opo with minimal bulk. Also, I made my own template (much like I did with the ringke fusion) So I can have custom backs.
The one downside is quality control though. When I got the case, one of the plastic protective sheets was positioned halfway down the back and there was a small scratch on the top right hand corner.
That said, this is still my favourite case.
Sent from my One A0001 using XDA Premium 4 mobile app
I was considering buying this, but what you guys said, made me change my decision and I bought the pelosi case.. Perfect fit, sandstone feeling and very slim fit
So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?
Where did you order it from?
did you search in sonymobile dot com ?
Could show me link? Thanks!
Could show me link? Thanks!
For phone cases I only trust spigen and otterbox, too bad they don't make cases for Z4. Maybe I should wait.
Roigi.Manson said:
So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?
Click to expand...
Click to collapse
http://www.spigen.com/collections/sony/products/sony-xperia-z4-case-ultra-hybrid?variant=2418853249
Explosion proof tempered Glass.
Roigi.Manson said:
So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?
Click to expand...
Click to collapse
If you go on Amazon it should be pretty easy to find, there are a few good companies out there doing cases and screens for this handset. I would generally go with what I know, and also look at the customer reviews.
CASE Brand
dizzyman44 said:
For phone cases I only trust spigen and otterbox, too bad they don't make cases for Z4. Maybe I should wait.
Click to expand...
Click to collapse
I have not bought a case from spigen or otterbox. How about the price and looking?
Edith G said:
I have not bought a case from spigen or otterbox. How about the price and looking?
Click to expand...
Click to collapse
They are like queen and king in phone case industry. They both look stylish and sturdy. You can check them out on amazon for price, at least affordable to me.
They look very nice. Thanks for sharing.
If you go on Ebay it should be pretty easy to find, there are a few good companies out there doing cases and screens for this handset. I would generally go with what I know.
I have bought some from witrigs no matter the case, tempered glass or replacement parts.
Has anyone had any experiences with a bumper case for the Z3+, for instance this one here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.co.uk/gp/product/...bumper case&qid=1438705127&ref_=sr_1_2&sr=8-2
Considering the back remains uncovered: how scratch resistant is the back generally? Is it Gorilla Glass?
Thanks!
TinXpH said:
Considering the back remains uncovered: how scratch resistant is the back generally? Is it Gorilla Glass?
Click to expand...
Click to collapse
What he said!
How does it fare with scratches etc?
Edit: haha wow, forgot I made that sig... bit out of date now
Sn0wHookr said:
http://www.spigen.com/collections/sony/products/sony-xperia-z4-case-ultra-hybrid?variant=2418853249
Click to expand...
Click to collapse
I've got that case; it's pretty good, has a lip to keep the screen off the surface of a table if you put it face down. Main downside is that the SIM/MicroSD card tray is cut out so the surrounding plastic on the screen surface is thin. Over time I'm worried this may get weakened.
The Ringke Fusion looks good, however the one I had for the Samsung S4 had issues putting in large headphone jacks (e.g. Etymotic ER-4, Sony MDR-7506) and the headphone jack hole on the Z3+ case looks even smaller if that's possible. No issues with headphone jacks and the Spigen .
A while ago I ordered this case:
http://www.banggood.com/Nillkin-Sup...k-Cover-Case-For-Sony-Xperia-Z4-p-991532.html
Takes a while to be delivered, a month for me, but it really is a nice case. Pretty slim, but it is is rather firm. Adds a nice grip to the phone, due to the 'soft' feel of the plastic. It covers just the back and the left and right side, but it's edges extend just half a millimeter to protect the other sides of the the phone as well, even when it lies face down. The holes for all the buttons are nice and tidy. And bang-for-the-buck-wise, it really is a no brainer
Got the Spigen one because I got tired of the flip cover I had been using. Very nice. Not pretty, but feels good in the hand and very robust. Why oh why does it have to have the silly "air cushion technology" text at the bottom, though?
Got the Spigen case and it looks great on my white Xperia™ Z3+ Dual.☺
kingofging said:
What he said!
How does it fare with scratches etc?
Click to expand...
Click to collapse
I haven't been using any case or anything with my Z3+ since I bought it. The back is as extremely polished as the front, so it is super slippery in almost any surface where you'd put it - seriously, very slippery; it's like my Z2 wasn't half as polished. As a result, mine already shows a few very minor scratches from the various surfaces I've parked it on, and a very light one over the camera glass. It seems that the back is not as resistant as the front, though - the same week that I bought it, I accidentaly dropped my Z3+ on the rough floor of an old church (it was during a marriage ceremony, very silent atmosphere at the moment and just imagine how I wanted to scream and swear all sorts of bad words when that happened!); "fortunately" it landed on its back, but it made a very noticeable scratch Because of all of this, I just bought a silicone case. I hate cases because they fundamentally alter the immediate look of the device, but unfortunately it gets too much exposed without one.
This thread is not dedicated to any specific case , this for any case you want to share your experience with it.
For me after trying too many cases , expensive from known brands and cheap ones , I found this case from Ali express "Original MSVII Coque For Huawei Ascend P9 "
https://www.aliexpress.com/item/Ori...32693283790.html?spm=2114.13010608.0.0.oOgFaQ
Perfectly designed for the P9 , very sleek design ,comfortable , too much light and slim ,and too many colors to choose from . I highly recommend this case for protection and design . I choose the fashion black one , look amazing with my grey P9 , now my phone totally black and sexy .
and it is only 4.5 $ .
This my feedback for this case , check other feedbacks from the link above , it take 5 stars ( 4.9 out of 5 ) from 136 feedbacks
these some pictures for the case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please share experience with your preferred case
I agree. I have blue, black, grey, matt and frosted versions. Excellent case, frosted is like very fine sand paper like feeling, excellent grip. Matt is like a baby skin smooth. Fits like a glove, side buttons very nicely usable and ports easily connectable. I highly recommend.
Though this post looks like a big ad for those cases, I have to admit that I have one and it's quite awesome!
best combo for me,this case along with this screen protector
I went with this one and so far it's working fine..
I actually did the "o ****, flying phone' the other day and it bounced and not a scratch in it and no cracks on the screen or cover..so it's proved it's worth already..
The kick is handy but I also find that helps with holding the phone in one hand..
Also I use charging dock during the day and it works fine with those too..
Charging dock used..
Sent from my EVA-L09 using Tapatalk
I've got that one with the kick stand for my P9, but it was too slippy in the hand.
I use a Ringke Fusion on mine.
https://www.amazon.co.uk/d/Mobile-P...UTF8&qid=1483608177&sr=8-1&keywords=ringke+P9
Not too slippy, the corners are protected nicely, and it has a lip all the way around the front, so you can put your phone face down and the screen wont touch the desk etc.
I like the covers on the headphone and USB port too. Stops fluff from your pocket getting in there!
Lenuo case
I really missed my product (RED) leather case, that I had on the iPhone 5, so I found something similar.
This is a case by Lenuo, and they also have a flip-version of it. I'm currently very happy with it
I got this case off eBay Australia, its bargain for $6.99 but stay away from the tempered glass, its crap and does not even cover the screen. This case has no lip for the display so a tempered glass that actually cover the full screen is highly recommend.
http://www.ebay.com.au/itm/17239282...49&var=471220823462&ssPageName=STRK:MEBIDX:IT
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
spring80 said:
best combo for me,this case along with this screen protector
Click to expand...
Click to collapse
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.
n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.
Click to expand...
Click to collapse
from here my friend
Full Cover Anti-Explosion 9H 2.5D Tempered Glass For Huawei P9 EVA-L09 EVA-L19 EVA-L29 Nillkin Amazing CP Screen Protector Film
http://s.aliexpress.com/mUBriQvQ
Currently using these 2 and loving both...........
Official Magdalena Hristova Painted Union Jack Soft Gel Case for Huawei P9 https://www.amazon.co.uk/dp/B01L90OBOK/ref=cm_sw_r_cp_apa_LHtIyb351ZHE8
Yooky Hua Wei P9 Case, Premium PU Phone Cover & Business Style Luxury Genuine Leather Flip Protective Shell For Huawei P9 Wallet Case https://www.amazon.co.uk/dp/B01M0QX7QL/ref=cm_sw_r_cp_apa_ALtIyb6ZPHQQC
What's your opinion?
n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Click to expand...
Click to collapse
What is your experience with this Pierre Cardin cover? I had one for my LG G3 and i loved it.
Is the fingerprint sensor easily accessible???
Please let me know.
Braggus said:
What is your experience with this Pierre Cardin cover? I had one for my LG G3 and i loved it.
Is the fingerprint sensor easily accessible???
Please let me know.
Click to expand...
Click to collapse
So far so good. Still waiting for the worn out look
I think if the finger print sensor was crap on P9, then this cover wouldn't be good. Because when I first looked at the case in my hand, I thought that the finger print sensor won't be able to read enough of my finger print when unlocking. But P9's finger print sensor is really good and works 100% with this case.
The finger print cutout is right in the center and precisely cut.
I wouldn't recommend this case to someone who drops their phone a lot because some areas are not protected by this case. The front facing top and bottom edges of the phone.
But this isn't a problem for me, I rarely drop any phone.
Let me know if you want to know more.
Thanx for your reply. I luckily also drop my phone rarely so that's nothing to worry about. I'm about to order one when i'm at home.
And again, thank you for your reply.
I received this case today https://www.spigen.com/products/huawei-p9-case-rugged-armor feels very good in hand and I like how it looks
Been using the Otterbox Acheiver Case for the last couple of weeks. I use my phone when hiking with OS Maps so wanted something robust.
It is very good, and easier to take on and off than previous Otterbox Commuter cases, but they have not included plugs for the charger and headphone ports this time. A minor gripe. The phone will still survive a drop onto rocks as long as the case takes the hit and not the screen!
http://www.otterbox.co.uk/en-gb/huawei-p9/achiever-case/77-54512.html?color=20
Cool! I had no idea Otterbox made cases for the P9
n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.
Click to expand...
Click to collapse
I have this case to, purchased from Amazon UK. Really recommend it but not for total protection or impact. Have to buy something stronger when my 18 month son holds it and decides to throw it about!
anyone else had tested / bought these luphie bumper cases? which protective but not too bulky case can anyone recommend ?
also which glass screen protector (nillkin/other brand?)
thanks
Still looking for a new case, got my phone a few weeks ago after upgrading from a Samsung S4, are people on this forum still using P9?
So, I was looking for a new skin on my phone when I realized that I didn't want to do a wrap. If you're like me, you'll spend $10 and then remove the skin in like a week. After that you'll have to buy another one if you want to go through the process again. I'm not 100% into cases because of bulk and this is a damn sexy phone.
I scoured a few different places looking for a white thin case when I came across this: ELAGO THIN CASE
Here are my pros:
Fit is perfect
Cut outs are exact
This actually feels like it could be part of the phone
Has a Matte White look
Not TPU, its a hard plastic
Lots of compliments just in one day
Cons (Keep in mind, these are things people may not like but doesn't bother me)
Phone is still a little slippery
Buttons are now a bit more flush with the case
Zero lip over the glass to put upside down
The cut outs are exact so accessories are about 1mm from being perfect
I'm going back for the other two colors. This is an awesome case. Does anyone else have any ultra thin cases they can recommend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Sent from my SM-G955U using Tapatalk
bigmase01 said:
I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Click to expand...
Click to collapse
Is there a promo code for that one? Kinda high in price.
got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug
I got the Anccer in gravel black:
https://www.amazon.com/gp/product/B06XTQKJY8/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Preserves "caseless" feel, super grippy.
Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v
I got this on Amazon:
Galaxy S8 Plus Case Clear Black https://www.amazon.com/dp/B06XGRDMZ9/ref=cm_sw_r_cp_apa_0VzizbX1VNFKY
Sent from my SM-G955U using Tapatalk
Nice, I'm going to order one.
Love that white & black combo.
sebastianraven said:
Is there a promo code for that one? Kinda high in price.
Click to expand...
Click to collapse
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk
bigmase01 said:
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
That's this one too. Same reason why I like it.
SandeepEmekar said:
Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v
Click to expand...
Click to collapse
Good call.
Edit: Just went to the link. I just don't like AliExpress. I had problems with them in the past. 20-39 days for a case when I can get it in 2 days from Amazon, meh... I'll pay the difference.
pixel_junkie said:
got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug
Click to expand...
Click to collapse
Really? That's a bummer. Mine fits perfect and has no movement. I don't have any sort of skin. I wonder if that's throwing off the fit.
felloffthetruck said:
Nice, I'm going to order one.
Love that white & black combo.
Click to expand...
Click to collapse
It looks just as good in person.
Needs a top and bottom lip. Put your phone face down and it will scratch.
bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Nope. User a screen protector.. Cases with lips exist. This is for absolute minimalists.
Just went to the mailbox to get the Elago case I ordered after seeing this thread. I'm coming from the Spigen Slim case and, even by comparison, the Elago is ridiculously thin! I love it, but it definitely needs to be paired with a screen protector in order to keep the phone somewhat safe.
It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
glitchhawk said:
It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Not even close.
Just a heads up. The Elago scratches and scuffs pretty easily. Not that I expected much from such an inexpensive case but, I've been babying my black Elago and, within 24 hours it already has 4 or 5 long scuff marks across the back. Not a big deal, just thought I'd mention. It would've been nice if they had used the same type of rubberized finish found on the Spigen and Ringke slim cases.
bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Who sets their phone with the screen down?
Hi guys have you found a best casing for our phone?
I think for now, Ringke Fusion X is the best case for Poco F3 see video here of the casing
Nillkin "Super Frosted Shield" and "Textured Nylon Case" are awesome!
Feels high quality and perfect fit.
~7€ from China (AliExpress Nillkin Oversea Store)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you guys know a case store where they ship from Europe?
I don't want to wait 30-50 days for a case to arrive
FYI: There's one more topic about cases already.
I got myself that one for 3$ (glass included in price , which is pretty ****ty fitted)
It's not bad, but very slippery and the design is not the best.
Yesterday I ordered a new NILLKIN CAMSHIELD for like 13$ and I hope it will be better. If not I can just send it back for free .
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.
osemoka said:
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.
Click to expand...
Click to collapse
Mine doesn't experience with that problem. Without using this particular case, the proximity sensor is fine. Even with the fabric case by nilkin, it's fine as well. However, when I'm using camshield, the proximity sensor is not working at all. So I was wondering about the location of the sensor. Tried adjusting my tempered glass didn't help too.
Thanks first!
I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad
+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.
Jinzuken said:
I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad
Click to expand...
Click to collapse
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nemix77 said:
+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.
Click to expand...
Click to collapse
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
Spigen is good man. Thick, but comfortable to handle/carry it with your arm. Its thickness will satisfy and ensure you that your phone is protected when it falls or accidentally dropped on the ground.
osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
It's elastic/rubberized but it's quite tight though. Plus, my proximity/ultrasonic sensor doesn't work well with the camshield. Fabric one by nillkin works fine though.
billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
Yes. It fkn blocks it. I will send it back... And wait for spiegen.
Hi! What do you think about this Pitaka Case like? https://m.aliexpress.com/item/1005002402489617.html?trace=wwwdetail2mobilesitedetail
I ordered this one. It will probably come tomorrow.
https://a.aliexpress.com/_mPfw2pL
Since the phone itself is thin, I prefer the built in jelly case. But I ordered some cases from the local shop that looks like this:
Hello all nice to share thanks.... here are mine:
I have 2 of these, both are frosted rear with black or dark blue frames. Perfect fit including the fingerprint sensor and no issues blocking other areas. ¥11/€1.4/£1.23 each
Also have this all black and black with blue ring circle. The ring flips up to 180 degrees and rotates 360. Again, the fit is perfect though I don’t care for the writing but it’s not as obvious as in this picture. The centre is a so you could use it on a car mount but I sold my car so donknow how firm it is. ¥11.5/€1.5/£1.3 each
Lastly have this Nillken on order so need a couple of days till it arrives. ¥35/€4.5/£3.9 each
All three were purchased from Taobao, and you can search using the pictures to find numerous sellers. I’m in Hong Kong so there is a little more for transshipment postage but it’s very cheap.
I bought 2 sandstone cases, but I'm more for the aesthetics than for the protection.
https://es.aliexpress.com/item/4000061622675.html?spm=a2g0s.9042311.0.0.455863c0kHj4Bu
Just received the Nilkin Nature case. nice looking and better protection than the provided one.
https://www.aliexpress.com/item/1005002386841661.html?spm=a2g0s.9042311.0.0.225e6c37nEwch4
I have the transparent one.
I got the nillkin one sent with my device from poco. Really nice tight fit, feels secure. Ridges on the edges stand proud to protect the screen and the lens