Develop Bugs

Thin cases or even none!

I'm looking for a really thin and lightweight case for my note. I really prefer to use it without the flipcase, and like the SGP ultra thin that I had for my S2. But the ultra thin is not out yet and just about every case is either too bulky or made of tpu or some other material that I don't like.
So what do u guys think? Is it sufficient to just use a screen protector? I keep my phone in my bag when not in use.
Sent from my GT-N7000 using XDA App

http://www.ebay.com/itm/28079378489...:IT&_trksid=p3984.m1497.l2649#ht_15385wt_1163
supposedly the slimmest case around.
either grab one of those, or grab one of the ebay plastic cases.
but pointless to get a case that is too slim as it wont end up offering any worthwhile protection. it may prevent scratches, but wont help with drops.

Case Mate Barely There

daxmedflax said:
I just got mine and am surprised at how much better it looks and feels than I thought it would.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
check this，you may like it
http://www.ebay.co.uk/itm/150718989...89993&_sacat=See-All-Categories&_fvi=1&_rdc=1

How about this?
Golla case:
http://detail.tmall.com/item.htm?spm=110-Ss5-44zsb.4s0B-8o2X5.h-58MuI&id=13306049001&

transparent grey/smoke thin case
i highly recommend this one...
http://www.ebay.co.uk/itm/400264182...X:IT&_trksid=p3984.m1497.l2649#ht_6996wt_1185
i got it 2 days ago , great grey/smoke transparent case , also i noticed it is very thin ,even thinner than the Nillkin cases (i have 2 Nillkin cases).
now i can easily plug my MHL / those big 3.5 stereo audio adapters, while with the nillkin, i had to take it off for both those adapters to fit , not saying Nillkin case is a bad one , no its is a great case.
so far im loving this new case , cos i tend more to like transparent dark cases.
hope this helps someone making up his mind
cheers

Goodm7sn said:
i highly recommend this one...
http://www.ebay.co.uk/itm/400264182...X:IT&_trksid=p3984.m1497.l2649#ht_6996wt_1185
i got it 2 days ago , great grey/smoke transparent case , also i noticed it is very thin ,even thinner than the Nillkin cases (i have 2 Nillkin cases).
now i can easily plug my MHL / those big 3.5 stereo audio adapters, while with the nillkin, i had to take it off for both those adapters to fit , not saying Nillkin case is a bad one , no its is a great case.
so far im loving this new case , cos i tend more to like transparent dark cases.
hope this helps someone making up his mind
cheers
Click to expand...
Click to collapse
Lol, what on earth does this image have to do with a cellphone case auction listing???
Trying to influence geeks to buy it now? Lol!!

SGP Ultra Thin

Thank you for all the suggestions! I didn't know about the existance of some of them! I may still go for the Ultra Thin Air now that it is available as I had it for my S2 and coupled with an SGP screen protector, seems good enough.
For those who are unsure about how good the screen protector is, check out the video at the bottom of this page.

Does the SGP ultra easily get fingerprints?

Xaddict said:
Case Mate Barely There
Click to expand...
Click to collapse
Surprisingly you can't find that case on Casemate site. Fake case maybe?

Well being a glossy plastic I suppose it does. My case for the S2 was white so it wasn't that obvious. Btw, I had dropped that phone at least a couple of times with the casing on, without any issues to the screen or bezel. Though admittedly the height was about three feet or less.
Sent from my GT-N7000 using XDA App

This case, FlexiShield Skin is pretty good in the thin department. Not the thinnest but then I think its good to offer some protection just in case theres a drop and you need it:
http://www.slavetotech.com/2011/12/review-samsung-galaxy-note-flexishield-skin/

this one should be thinnest u can found..
http://www.ebay.com.sg/itm/2x-0-2-m...752930?pt=PDA_Accessories&hash=item43ac040322

Daum Ex said:
Surprisingly you can't find that case on Casemate site. Fake case maybe?
Click to expand...
Click to collapse
Not fake.
Yet to be released, along with Case Mate Tough Case and Smooth Case for the Note.

i like the golla but note sure how much protection it really offers

I have read bad reviews for the Ultra thin air sgp for the GS2.
What are the chances that SGP will fix the problems from the S2 for the Note Ultra thin?

What bad reviews did you read about the S2 version?

holgalee said:
What bad reviews did you read about the S2 version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196414

Souai said:
http://www.ebay.com/itm/28079378489...:IT&_trksid=p3984.m1497.l2649#ht_15385wt_1163
supposedly the slimmest case around.
either grab one of those, or grab one of the ebay plastic cases.
but pointless to get a case that is too slim as it wont end up offering any worthwhile protection. it may prevent scratches, but wont help with drops.
Click to expand...
Click to collapse
Got one of these a few days ago, the case itself is thin and fits like a glove, that being said it scratches really quickly (it was scratched by the time I put the screen protector on) on the backside, screen protector so far seems solid.

[User Review] Amzer Pudding TPU Case Black For Moto G

I initially looked at the flip case, but having had a go with a friends, I didn`t like the `flip` when making a call.
I started looking round for alternatives and spotter the Amzer Pudding TPU case.
I wanted something with protection all the way round the phone. I`ve seen several where the corners are exposed. Dropping it on a corner is something I had with an old phone and it immediately cracked the glass, so a fully enclosed cover was top of the list.
This has a `rubberised` texture and in use, it certainly feels grippy. The edges are sticky enough so you won`t drop it easily, but not so bad that you can`t get it in and out of your pocket without it `grabbing` the material. :good:
For £6.50 delivered, I really can`t complain. :good:
Amzer logo embossed onto the rear of the case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full edge coverage
Closeup of the corners
Neat cutout for the headphone
Camera & Speaker cutouts
Power and Volume controls are covered, but they are easy to use and I haven`t struggled to press the buttons at all.

By how much does the thickness increase..
i know its too much to ask but if u ever remove the case can u post pictures of case and bare mobile side by side
btw i have never used a tpu case..its is rubbery flexible or plasticky...i have heard that its a combination of both

Wh00sher said:
Dropping it on a corner is something I had with an old phone and it immediately cracked the glass, so a fully enclosed cover was top of the list.
Click to expand...
Click to collapse
But a drop of more than 2-3 feet would probably still break the phone. To get better protection, one should have a case with thick rubber bumpers on the corners like the Trident or Ballistic case. But of course, it wouldn't be as pocket friendly.

I have this case and dislike it. It adds too much thickness for me, but about what you can expect from a TPU case. I buy cases for scratch protection rather than drop protection. I hate the glossy bezel and just wish they had that same back finish for the entire case. The finish of the back is nice since it doesn't pick up fingerprints. The last thing I can't stand is how small the usb connector cutout is. This can probably be fixed with a knife, but it still shouldn't come like that.

is it sturdy material or flexible that it can be like silicon cover in the ease of putting/removing the phone from it?

It is not terribly difficult to put this case on or remove it. One of the best features of this case for me is the matte back section which greatly improves grip and the button molds in the side.
Sent from my XT1034 using XDA Premium 4 mobile app

wolfen69 said:
But a drop of more than 2-3 feet would probably still break the phone. To get better protection, one should have a case with thick rubber bumpers on the corners like the Trident or Ballistic case. But of course, it wouldn't be as pocket friendly.
Click to expand...
Click to collapse
Every time I use a heavy-duty case though I end up removing it after a few months and using a less-protective one because of the bulk, tpu cases seem like an "OK" compromise (or at least I hope).
I've been eyeing the Cruzerlite bugroid ones since watching this IRL drop test (nexus 5) video http://www.youtube.com/watch?v=KY9Svj9fYVg but the Amzer one reviewed here looks very nice :good:

isit a good alternative for the gripshell?
I need a bumper what do you suggest?

It does provide good protection but makes the device look dull. I guess I'll have to buy something else for my wife.
Sent from my Nexus 7

Its very cool, but its expensive. I'm from Spain and this price is elevate for me.
Enviado desde mi XT1032

This was the only tpu case available when the phone first launched online. It is a durable case with good protection, not too bulky. Offers good grip. Overall 7.5/10.

After much ado I finally decided on this case, bought it, received it, liked it at first. Then I had it in my pocket for a day at work.
Took my phone out of my pocket and the screen was covered in little waves of dust. And it had gathered up around the edges. Even had a small piece of plaster or something sticking to the screen.
I work in a dusty environment but this is ridiculous. I didn't have problems with my 3GS or Lumia, and though the bareback Moto G's screen seemed to attract a little more dust than those... This case is a DUST MAGNET.
I wish someone would have mentioned that in any of the dozens and dozens of reviews I'd gone over.

Orzly fusion "bumper" case

http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one

Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.

goofball2k said:
Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.
Click to expand...
Click to collapse
could you please take some pictures of it with your phone in it?

no_username_available said:
http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one
Click to expand...
Click to collapse
Here's a video to it if it helps....
If anyone has got the case pictures of it would be super helpful.

thanks i just wished it didn't expose any of the silver trip on the bottom or top. I ordered a diztronic instead

Orzly Fusion on my Bamboo OPO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

There's something strange, something wrong on this case...

Just an update, I stopped using the Orzly Fusion case, even on the Bamboo the case is loose (or maybe because it's on the Bamboo and it's thicker so it's not hugging the phone properly).

posted this on google+ originally
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr

bigballa said:
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr
Click to expand...
Click to collapse
Clench your phone, as if you're trying to compress the lips over your phone sides, you will feel like it has movement as if it really is loose.

I found the same thing. Fit is nowhere near as snug as I would have liked it to be, and I would have much preferred a bit more lip for screen protection.

I just received this too. It's an okay case.. NOT a fan of clear rears. But for 5 bucks not bad.

...
Iv had this for about 2 weeks. i love the case. I believe bigballa on the xda community has posted some really helpful pics. The fitting around the sides is perfect and access to all ports is spot on as well. Iv read some odd amazon reviews but i really cant fault this case. Shows the back of my phone nicely whilst offering great protection

kind of glad i got the diztronic instead, is recommend it I might pick up the fusion later on

Remove back Plastic
Hi,
Same here seems that it is realy thinn and not so protective. We will see after some drops (I hope It will not happen soon).
I remove all the plastic back part (with a dremel: Grinding and Cuting head) to preserve the sandstone back feel of the phone and to keep the weight down. Its is quite good, the case is still well in place, not so loosy. There is a litle loose in the midle of the long border. If I redo this operation I will keep a litle platic stripe between the midle of the long borders.
I will try to cut the back of an Diztronic case to compare the overall rigidity.
Regards,

+ 9h nilkin tempered glass screen protector
I've had the clear version of this case for about a couple months and have dropped it several times. No damage, just some small chips on the edges of the nilkin tempered glass screen

I have the case about 5 days, but I send it back, there are some problems with it.
First the polycarbonat back scratches really easy and looks bad, second is the case not fits at the top and bottom, so there can enter a lot of dust.
I can not recommend this case

The back transparent easy to scratch. Demmittt.

I actually really love this case. It is much slimmer than the ringke fusion and actually maintains the shape of the opo with minimal bulk. Also, I made my own template (much like I did with the ringke fusion) So I can have custom backs.
The one downside is quality control though. When I got the case, one of the plastic protective sheets was positioned halfway down the back and there was a small scratch on the top right hand corner.
That said, this is still my favourite case.
Sent from my One A0001 using XDA Premium 4 mobile app

I was considering buying this, but what you guys said, made me change my decision and I bought the pelosi case.. Perfect fit, sandstone feeling and very slim fit

Suggest me any premium one plus 3T back case [INDIA]

Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks

i_heart_3t said:
Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks
Click to expand...
Click to collapse
Otterbox

Spigen OnePlus 3T Case Rugged Armor : https://paytm.com/shop/p/spigen-one...k-k03cs20615-MOBSPIGEN-ONEPLSPIG245649E6B52A8
you'll get a 20% cashback on paytm. It's available on all other websites without the cashback.

vijaynelaturi said:
Otterbox
Click to expand...
Click to collapse
loved that one highlighted at official oneplus site but way to exp

here are some recommendations,,
#2, #9, #10
http://www.myandroidphone.in/2017/01/oneplus-3t-back-cover-cases.html

I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.

Spigen's Rugged Armor case won't protect anything, it's a visual only improvement, there isn't even any padding on the corners.
Otterbox is the best protection you can get but it is a lot bulkier in your pocket.
Look on YouTube for drop tests with otterbox cases, there are people dropping them from the third floor of buildings with only light scratches.

IF u want transparent, nothing better than this exsits quality and looks wise
http://www.amazon.in/OnePlus-Spigen-Hybrid-Crystal-K03CS20616/dp/B01H3PF2AM
u get it cheaper here
https://paytm.com/shop/p/spigen-one...ar-k03cs20616-MOBSPIGEN-ONEPLSPIG2456446710B2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
available in 524 on Paytm.
Amazon it's 900
Sent from my Redmi Note 3 using Tapatalk

I am using the Original Glass screen protector along with the Original case as shown in the video here:- https://www.youtube.com/watch?v=ks4Zn9Pe-ls
Let me know how you like it!

try the spigen armor with carbon fiber it's matte back and has a pretty sleek design found one on ebay for 15$ but the one downside to the case is that it has these bumps under the hardware button covers which constantly puts slight pressure on the power button which caused a problem on older samsung devices with turning off on its own later down the road. to fix this problem I just took a file and pliers and removed the bumps that were under the hardware button covers. this can be done on all cases to prevent any chance of the phone have a problem with turning off on its own later

I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these

samsexy98 said:
I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these
Click to expand...
Click to collapse
i am using spigen myself, the cut outs r perfect, No issue whatsoever in plugging anything!

ONEPLUS official Ebony back case.
no bulk and looks amazing.
not much protection though, just for the looks.

NirajGajjar said:
I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.
Click to expand...
Click to collapse
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?

grasshop3r said:
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?
Click to expand...
Click to collapse
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.

NirajGajjar said:
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.
Click to expand...
Click to collapse
Thanks! I'll get just that one. I anyway have some oneplus store credits
I'll keep the company provided, pre-applied screen protector ON till it lasts. Then I'll keep the screen bare. Just the back cover will be good.
This is my first OP device and will be my first purchase through the OP India store.

Try the cruzerlite bugdroid covers they are good

Finally an Ultra Thin Case I love - Elago

So, I was looking for a new skin on my phone when I realized that I didn't want to do a wrap. If you're like me, you'll spend $10 and then remove the skin in like a week. After that you'll have to buy another one if you want to go through the process again. I'm not 100% into cases because of bulk and this is a damn sexy phone.
I scoured a few different places looking for a white thin case when I came across this: ELAGO THIN CASE
Here are my pros:
Fit is perfect
Cut outs are exact
This actually feels like it could be part of the phone
Has a Matte White look
Not TPU, its a hard plastic
Lots of compliments just in one day
Cons (Keep in mind, these are things people may not like but doesn't bother me)
Phone is still a little slippery
Buttons are now a bit more flush with the case
Zero lip over the glass to put upside down
The cut outs are exact so accessories are about 1mm from being perfect
I'm going back for the other two colors. This is an awesome case. Does anyone else have any ultra thin cases they can recommend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Sent from my SM-G955U using Tapatalk

bigmase01 said:
I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Click to expand...
Click to collapse
Is there a promo code for that one? Kinda high in price.

got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug

I got the Anccer in gravel black:
https://www.amazon.com/gp/product/B06XTQKJY8/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Preserves "caseless" feel, super grippy.

Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v

I got this on Amazon:
Galaxy S8 Plus Case Clear Black https://www.amazon.com/dp/B06XGRDMZ9/ref=cm_sw_r_cp_apa_0VzizbX1VNFKY
Sent from my SM-G955U using Tapatalk

Nice, I'm going to order one.
Love that white & black combo.

sebastianraven said:
Is there a promo code for that one? Kinda high in price.
Click to expand...
Click to collapse
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk

bigmase01 said:
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
That's this one too. Same reason why I like it.

SandeepEmekar said:
Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v
Click to expand...
Click to collapse
Good call.
Edit: Just went to the link. I just don't like AliExpress. I had problems with them in the past. 20-39 days for a case when I can get it in 2 days from Amazon, meh... I'll pay the difference.

pixel_junkie said:
got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug
Click to expand...
Click to collapse
Really? That's a bummer. Mine fits perfect and has no movement. I don't have any sort of skin. I wonder if that's throwing off the fit.

felloffthetruck said:
Nice, I'm going to order one.
Love that white & black combo.
Click to expand...
Click to collapse
It looks just as good in person.

Needs a top and bottom lip. Put your phone face down and it will scratch.

bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Nope. User a screen protector.. Cases with lips exist. This is for absolute minimalists.

Just went to the mailbox to get the Elago case I ordered after seeing this thread. I'm coming from the Spigen Slim case and, even by comparison, the Elago is ridiculously thin! I love it, but it definitely needs to be paired with a screen protector in order to keep the phone somewhat safe.

It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

glitchhawk said:
It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Not even close.

Just a heads up. The Elago scratches and scuffs pretty easily. Not that I expected much from such an inexpensive case but, I've been babying my black Elago and, within 24 hours it already has 4 or 5 long scuff marks across the back. Not a big deal, just thought I'd mention. It would've been nice if they had used the same type of rubberized finish found on the Spigen and Ringke slim cases.

bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Who sets their phone with the screen down?