Develop Bugs

[REVIEW] Cruzer Lite Argyle TPU Cases

Recently picked up two different Cruzer Lite Argyle Pattern TPU cases...here's what I think:
This applies to both the Clear Argyle & Smoke Argyle Cases.
Please note, I'm NOT affiliated with the maker of these cases...just LOVE a good TPU Case!
1. It fits perfectly- nice and snug. Cutouts are just right. Easy to put on / take off. No "give" doesn't feel like it'll get loose on ya.
2. The volume buttons covered with two overlays, defining the buttons nicely. A little stiff at first, but seems to be softening a little over a few days.
3. Not overly slick. Easy to put in your pocket / remove. Seems to have enough friction to prevent dropping. Some of these TPU cases are like holding a wet fish, while your hands are covered in baby oil. This one's just fine.
4. Lightweight - doesn't add any real bulk...most TPU cases don't. Having such a slim, lightweight phone is something to show off...this doesn't detract from that.
5. Great packaging - most of these type of TPU cases just come shipped to you in a plastic baggie. This had said plastic baggie, with another layer of protection inside that...plus a cardboard cutout. (it's the little things that impress)
6. I love that the SGSII logo can be seen through the argyle pattern. This and the darker of the two cases allow for this. I like it!
7. The argyle pattern itself is sharp...I feel it adds to the classy image of this phone.
I'll say in summation, that I've had an overall pleasant experience with this TPU case...and the Owner that sent it to me. Seems like decent Customer Service in my interactions. Of course, in all honesty a TPU case doesn't offer as much protection as an OtterBox...but overall it serves it's purpose!
GET ONE HERE!!
Cruzer Lite Facebook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I like this case too. I posted a few pictures in another thread.
I didn't like how the volume rocker cover felt so I ended up using the cardboard mod that other people were using with the other TPU cases. I might consider removing that mod because I'm afraid it might damage the buttons in the long run.

I really like these as well. Looks like the smoke argyles are sold out at amazon and I cant find them on ebay. anyone know where these are in stock right now?

They will be stock in about a week. I will have nine colors total.

joelmic said:
They will be stock in about a week. I will have nine colors total.
Click to expand...
Click to collapse
Thanks for pokin yer head in!

Looking good. thanks for the pics.

leyvatron said:
Looking good. thanks for the pics.
Click to expand...
Click to collapse
Anytime Leyvatron!

bigkmoney said:
I really like these as well. Looks like the smoke argyles are sold out at amazon and I cant find them on ebay. anyone know where these are in stock right now?
Click to expand...
Click to collapse
You can get it from here. They are on fommy.
http://www.fommy.com/view-full-page...el=Samsung+Epic+4G+Touch+SPH-D710&skuno=92292
Use coupon code "fommycall10" and get a dollar off. Got mine for $13

I picked up the smoke and clear.
I love the cases, but the volume buttons are really tough. Def. need to do the piece of thick paper hack to them

received clear argyle case thanks bandage! Will post pics up soon.

This case is back in stock plus 7 other colors

I just got a clear one and a blue one from eBay. 4.99 each and free shipping. There were on my phone in 2 days. My volume buttons are easy to click. Somewhat easier than no case. It gives it more of a clicky feel. ( if that's a word?)
Sent from my SPH-D710 using XDA App

mobeast17 said:
I just got a clear one and a blue one from eBay. 4.99 each and free shipping. There were on my phone in 2 days. My volume buttons are easy to click. Somewhat easier than no case. It gives it more of a clicky feel. ( if that's a word?)
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Cruzer lite does not sell its cases on ebay, Not sure what brand you got.

joelmic said:
Cruzer lite does not sell its cases on ebay, Not sure what brand you got.
Click to expand...
Click to collapse
Oh. I'm not sure. But it looks exactly like the one in the OP.
Sent from my SPH-D710 using XDA App

mobeast17 said:
Oh. I'm not sure. But it looks exactly like the one in the OP.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
no worries, I was just trying to state that Cruzer Lite only selling there cases on Amazon and our own website

My case is in the mail today. Currently I have a silicone skin, these are horrible imo, difficult to put in and out of my pocket as well an eyesore. Cannot wait til this arrives!

g4me0v3r said:
My case is in the mail today. Currently I have a silicone skin, these are horrible imo, difficult to put in and out of my pocket as well an eyesore. Cannot wait til this arrives!
Click to expand...
Click to collapse
What color did you get?

Ordered the clear argyle case, just arrived today. The case fits like a glove, the only thing is that the argyle design is scratched and faded around the corners. Maybe I'm just being finicky. But I can't really argue with the price. Leaps and bounds better than the silicon case I had, oh and it's lighter too.

The way the cases are molded sometimes small defects can be found on the corners. I am glad to hear you like the case.

Other than those minor problems, I love this case. The case seems good enough to give me peace of mind while handling my phone.

Speck Clear GemShell for HTC One - Mini Review

Hi all,
I've been a lurker for many years here on XDA and figured I'd try and contribute for once. Sorry if someone has posted a review on this case in the other threads. I looked around for a bit but didn't find any.
I received my Speck GemShell for my HTC One http://www.speckproducts.com/smartphone-cases/htc/gemshell-for-htc-one.html about 3 days ago. It's a hard plastic case with gel incorporated around it. BTW, for those considering shipping options, mine shipped out from Oklahoma so it reached me in Chicago in a day via the free shipping option (USPS). That being said, here are my impressions so far:
Pros:
- The case still leaves the phones feeling pretty slim (though I still do prefer it nekkid).
- It's clear except for a gel around the front rim, corners, and inputs.
- The gel around the front rim elevates the phone when placing it on its face.
- The gel around the inputs will hopefully prevent wearing/cracking of the hard plastic.
- Seems well sealed enough that I haven't seen any dust or pocket enter the space between the case and phone.
- The speck logo on the back is really well done. It makes it seem like it's a part of the aluminum.
Cons:
- The power button becomes really recessed. Not a deal breaker for me but definitely something to take note of.
- Interacting with the volume buttons requires more effort.
- I'm OCD on keeping fingerprints off my phone/case and the cleaning has left micro-scratches on the case. So far it doesn't interfere with the appearance but we'll see after a longer period of time.​- Wish the gel actually covered the entire sides, top, and bottom for better coverage. Even with the clear plastic, you don't really see the aluminum on the sides, top, and bottom.
So you can see the selling point of this phone is not only that it's a clear case but the gel that they've incorporated into it. I'm a bit sad on the micro-scratches but I'm not convinced there's any other case-based solution that would be cost effective. I've attached pictures of the case below.
Hope this mini-review helps!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This is how reviews should be. Well done!

Red5 said:
This is how reviews should be. Well done!
Click to expand...
Click to collapse
Shame the case looks crap doe.

Great review, not too long, not too short, good display angles, thank you!
compact_bijou said:
Shame the case looks crap doe.
Click to expand...
Click to collapse
How does the case look any different then any other clear case? zzzz

Just canceled my Spigen and ordered this!

PapaRhino said:
Great review, not too long, not too short, good display angles, thank you!
How does the case look any different then any other clear case? zzzz
Click to expand...
Click to collapse
Thick, will turn yellow after a couple of weeks unlike other hard clear cases (such as the Spigen) and it's not very clear. Its very visible on the phone and defeats the purpose of it being clear.

and cturetar
It's good to look. Maybe i will have one.:fingers-crossed::fingers-crossed:

compact_bijou said:
Shame the case looks crap doe.
Click to expand...
Click to collapse
thats your opinion doe

PillPoppin said:
You sir know your cases. I definitely agree here. It may be "grippy" but this will yellow immediately... for clear cases you have to go with a hard case
Click to expand...
Click to collapse
And it'll crack at the stress points. Dirt ingress. Real slick.
CheesyNutz said:
thats your opinion doe
Click to expand...
Click to collapse
And you know what they say about opinions.

I just got this case in the mail over the weekend (still waiting on phone) and The case feels rather flimsy on its own and is incredibly thin. I have no doubt it'll protect against scratches, but feels like it'll do nothing for drops. I didn't expect Otterbox protection, but was hoping for some kind of impact absorption. Anyone have any experience with these cases and drops with previous devices?

Actually I went into the Sprint store on Thursday the 18th & purchased the white & silver speck case cor my HTC ONE that I was receiving in the mail the next day on the 19th & liked my case on it because it matches tne phone perfectly & fits it really tight like a body glove. It's hard to put on & hard to take off but I saw the clear gel case by speck o line yesterday morning & wanted that one because it will show my phone all the way around, I just dont want it to loosen up over time but this one I do have by speck is a hard shell case on the outside but a softgray rubber on the inside
Sent from my GT-N8013 using xda premium

I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2

mareen77 said:
I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I was completely surprised at how thin the speck is. It's hardly noticeable.

Toaster Strudels said:
Thick, will turn yellow after a couple of weeks unlike other hard clear cases (such as the Spigen) and it's not very clear. Its very visible on the phone and defeats the purpose of it being clear.
Click to expand...
Click to collapse
I've had mine for two weeks and it's VERY yellow. I'll post pics when I can. I've had other clear cases before, hard and soft, but never had them turn yellow like this one.

oophlamer said:
I've had mine for two weeks and it's VERY yellow. I'll post pics when I can. I've had other clear cases before, hard and soft, but never had them turn yellow like this one.
Click to expand...
Click to collapse
Lolzzzz
Sent from my Nexus 4 using Tapatalk 4 Beta

I'm not sure of anyone has mentioned as o didn't read entire post. Leet414 u may try that compound they sell for headlight lenses to get scratches out. May be a stretch but that stuff works.
Sent from my Nokia Lumia 810 using XDA Windows Phone 8 App

mareen77 said:
I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
It's pretty thin

Hyperion Case. Perfect black minimal TPU with dimple cutout.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No branding. Buttons are dimples, work fine. Cutouts are perfect.
Mix of matte and gloss black.
TPU is tight and resistant to pulling off the edges of the screen.
Ordered late Friday night, got Monday morning.
http://www.amazon.com/Hyperion-Moto...id=1378838209&sr=8-1&keywords=hyperion+moto+x

Looks pretty good. Question: The amazon title says "and screen protector." This isn't a case with a built in screen protector, is it? I have a screen protector on mine already, so I don't need a case that has a screen protector built in, like an Otterbox or something. Just want a snap on case. So provided that it's just a case and a screen protector comes separately, how's the case fit regarding the screen? Does it seem like it'd interfere with a screen protector? Thanks

Screen protector is not part of the case. Just received this. Very nice

Awesome, thanks for the reply. Sold it for me, buying now

It just includes a cheapo plastic stickon protector.
The edge that wraps around the front is small, shouldnt interfere with any normal screen protectors.

You also have the quicksand case right? Which do u prefer this or the quicksand?

seanrobot said:
You also have the quicksand case right? Which do u prefer this or the quicksand?
Click to expand...
Click to collapse
Quicksand is obviously slimmer. The sandy texture is nice.
This provides WAY more protection though. The matte texture is also nice.
It's a matter of what you need.

Just got this Hyperion case in. Perfect cutouts, perfect form factor still kept (it's very slim). $6-7 on Amazon, can't be beat.

+1 from me. I've got the clear case, nicely shows off moto maker colors while still giving it that bit of extra protection.

I also ordered this one and was pleasantly surprised.
Sent from my XT1058 using XDA Premium 4 mobile app

wow that does look pretty good great find

I am waiting for the car sick to be released to see if it has limitations on case size. Hope they hurry before it is too late and I break this thing. This one looks good and cheap enough to just go for not knowing.
Sent from my XT1060 using XDA Premium 4 mobile app

I just ordered the Smoke colored one.

clankfu said:
I just ordered the Smoke colored one.
Click to expand...
Click to collapse
Got it today and love it. Wondering if I should've ordered the clear one though so I could see more of the back.

I got the frost clear one for a white moto x and it looks really good. The back has a nice matte feel to. I think this is the best tpu case for the moto x. I'd like a simliar hard case that is below 10$ but I can't seem to find one. Clear, dimple cut out, thin with a little lip for lay on the table.

Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.

finalarcadia said:
Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.
Click to expand...
Click to collapse
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.

clankfu said:
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.
Click to expand...
Click to collapse
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.

finalarcadia said:
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.
Click to expand...
Click to collapse
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.

clankfu said:
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=jmuE7QixQIg
Was that one. Discontinued or something, was never able to buy it again.

Orzly fusion "bumper" case

http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one

Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.

goofball2k said:
Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.
Click to expand...
Click to collapse
could you please take some pictures of it with your phone in it?

no_username_available said:
http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one
Click to expand...
Click to collapse
Here's a video to it if it helps....
If anyone has got the case pictures of it would be super helpful.

thanks i just wished it didn't expose any of the silver trip on the bottom or top. I ordered a diztronic instead

Orzly Fusion on my Bamboo OPO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

There's something strange, something wrong on this case...

Just an update, I stopped using the Orzly Fusion case, even on the Bamboo the case is loose (or maybe because it's on the Bamboo and it's thicker so it's not hugging the phone properly).

posted this on google+ originally
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr

bigballa said:
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr
Click to expand...
Click to collapse
Clench your phone, as if you're trying to compress the lips over your phone sides, you will feel like it has movement as if it really is loose.

I found the same thing. Fit is nowhere near as snug as I would have liked it to be, and I would have much preferred a bit more lip for screen protection.

I just received this too. It's an okay case.. NOT a fan of clear rears. But for 5 bucks not bad.

...
Iv had this for about 2 weeks. i love the case. I believe bigballa on the xda community has posted some really helpful pics. The fitting around the sides is perfect and access to all ports is spot on as well. Iv read some odd amazon reviews but i really cant fault this case. Shows the back of my phone nicely whilst offering great protection

kind of glad i got the diztronic instead, is recommend it I might pick up the fusion later on

Remove back Plastic
Hi,
Same here seems that it is realy thinn and not so protective. We will see after some drops (I hope It will not happen soon).
I remove all the plastic back part (with a dremel: Grinding and Cuting head) to preserve the sandstone back feel of the phone and to keep the weight down. Its is quite good, the case is still well in place, not so loosy. There is a litle loose in the midle of the long border. If I redo this operation I will keep a litle platic stripe between the midle of the long borders.
I will try to cut the back of an Diztronic case to compare the overall rigidity.
Regards,

+ 9h nilkin tempered glass screen protector
I've had the clear version of this case for about a couple months and have dropped it several times. No damage, just some small chips on the edges of the nilkin tempered glass screen

I have the case about 5 days, but I send it back, there are some problems with it.
First the polycarbonat back scratches really easy and looks bad, second is the case not fits at the top and bottom, so there can enter a lot of dust.
I can not recommend this case

The back transparent easy to scratch. Demmittt.

I actually really love this case. It is much slimmer than the ringke fusion and actually maintains the shape of the opo with minimal bulk. Also, I made my own template (much like I did with the ringke fusion) So I can have custom backs.
The one downside is quality control though. When I got the case, one of the plastic protective sheets was positioned halfway down the back and there was a small scratch on the top right hand corner.
That said, this is still my favourite case.
Sent from my One A0001 using XDA Premium 4 mobile app

I was considering buying this, but what you guys said, made me change my decision and I bought the pelosi case.. Perfect fit, sandstone feeling and very slim fit

Slimmest case available for the HTC 10?

I currently own the Spigen Neo Hybrid, which I thought was slim:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But it's not that much, really... The slimmest I could find was the Spigen Thin Fit, but it's not that much slimmer:
Is there anything slimmer out there?

I have that case... Try using it without the border....
I also have the seidio case... I just use the inner cushion part... It doubles as a thin case cuz I can see their logo on it... I don't think you can go much thinner

I didn't measure but I have a cheap Chinese TPU case and it looks less than a mm. It was less than $1 shipped.

I have the nillkin nature TPU case. Perfect fit, and only 0.5-0.6mm thickness. Not much "bulk" added at all when used.
Sent from my HTC 10 using XDA-Developers mobile app

joewoo said:
I have that case... Try using it without the border....
Click to expand...
Click to collapse
Don't really like it without the border and it's still too bulky.
ThrowingKs said:
I didn't measure but I have a cheap Chinese TPU case and it looks less than a mm. It was less than $1 shipped.
Click to expand...
Click to collapse
Care to provide a link where I can find a similar case?
spikeydoo2006 said:
I have the nillkin nature TPU case. Perfect fit, and only 0.5-0.6mm thickness. Not much "bulk" added at all when used.
Click to expand...
Click to collapse
I don't really like those kind of "translucent" cases... Had one for my previous phone and with time it became yellowish and ugly.

I also have the Nillkin nature, and yeah, most of these transparent cases do discolor over time, but for only $5 I'll pick up another one when that happens. As far as the case itself goes, I had one of those $1 TPU cases and the mold was a little loose, in particular the sides had a tendency to bulge outwards so I would definitely check the reviews and images before pulling the trigger on one of those. The Nillkin one is pretty spot on and the buttons feel much clickier. Nillkin also have a hard case that's almost as thin as the Nature case, I'll put a link below:
https://goo.gl/7Xus8N

+1 for the Nillkin, I also have this, some months now and not even remotely going yellow.
I have had cheap brand ones in the past that went yellow before now so holding hope this one will not do that.
Good case, light, slim and easy to remove if wanting to run naked around the streets for a bit

ryanjsoo said:
I also have the Nillkin nature, and yeah, most of these transparent cases do discolor over time, but for only $5 I'll pick up another one when that happens. As far as the case itself goes, I had one of those $1 TPU cases and the mold was a little loose, in particular the sides had a tendency to bulge outwards so I would definitely check the reviews and images before pulling the trigger on one of those. The Nillkin one is pretty spot on and the buttons feel much clickier. Nillkin also have a hard case that's almost as thin as the Nature case, I'll put a link below:
https://goo.gl/7Xus8N
Click to expand...
Click to collapse
I am really liking this case, the pictures look great.
I am currently enjoying the Spigen thin Fit case, but will be grabbing one of these, thanks for sharing. :good:
--------------
I had a 'barely there' case by Casemate on my M8, and was hoping they would bring it to the 10, but it seems they have discontinues that case for whatever reason.

Watch out for the spigen case, it has some issues with flash when using the camera. Otherwise it's solid.

Nazgulled said:
Care to provide a link where I can find a similar case?
Click to expand...
Click to collapse
This is the one I bought: link
It doesn't look exactly like the picture, but it was really inexpensive. I like the look of the HTC 10 so I got a clear case. I also figured that if it yellows a bit, I could always get a replacement for really cheap.

ThrowingKs said:
This is the one I bought: link
It doesn't look exactly like the picture, but it was really inexpensive. I like the look of the HTC 10 so I got a clear case. I also figured that if it yellows a bit, I could always get a replacement for really cheap.
Click to expand...
Click to collapse
For that price I can jump on board, thanks for sharing.
Mind posting some actual pictures of the case on and off the phone, please? :good:

andybones said:
For that price I can jump on board, thanks for sharing.
Mind posting some actual pictures of the case on and off the phone, please? :good:
Click to expand...
Click to collapse
Here you go: Imgur Album Link
1 of 5
2 of 5
3 of 5
4 of 5
5 of 5

ThrowingKs said:
Here you go: Imgur Album Link
1 of 5
2 of 5
3 of 5
4 of 5
5 of 5
Click to expand...
Click to collapse
Thank you kindly, looks real nice, especially for that price.
Do you suggest it?

I do. I have a more rugged case also, but only use that rarely because I feel safe enough with the thin case.

Thanks. Bought 3 of them just in case they get yellowish since they are so cheap and if I don't like it, well, too bad...

I've been rocking the Imak cowboy case (there's a review of it somewhere here). Keep in mind it'll probably have little impact protection but if all you're needing is scratch protection I find it perfect.

Slimmest case by far for me would be the included case from Yelun that was bundled with the TGSP. I've gone used only the HTC Ice View, Nillkin, and Spigen Crystal (I think).

Nazgulled said:
Thanks. Bought 3 of them just in case they get yellowish since they are so cheap and if I don't like it, well, too bad...
Click to expand...
Click to collapse
I grabbed 2 myself.
For 77 cents, can't go wrong.
I'm at that point where I love my 10 but no longer treat it like a baby, so I still want some protection against surface scratches and what not, but still want to be able to enjoy the device.
Hopefully it holds up as well as the M8 did for me. Bought it on release day, used it up until the 10 release day, in just a slim case, not screen protector, and it's still in mint condition.

X-Level probably makes some of the best slim cases I have ever used. I first discovered them for my M8 when I visited Hong Kong and I've gotten them for all my phones since then: http://www.ebay.com/itm/X-Level-Lux...hash=item1a1de87d40:m:m4lwJH0dcr1dceg1As9H-EQ
They're also really cheap which is nice.

This is one of the nicest and slimmest that I've used: http://www.ebay.com/itm/360-Protect...hash=item3d2066daa1:m:mJx-cwyQu1UTdGuV1gRW8gw