Develop Bugs

Suggest me any premium one plus 3T back case [INDIA]

Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks

i_heart_3t said:
Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks
Click to expand...
Click to collapse
Otterbox

Spigen OnePlus 3T Case Rugged Armor : https://paytm.com/shop/p/spigen-one...k-k03cs20615-MOBSPIGEN-ONEPLSPIG245649E6B52A8
you'll get a 20% cashback on paytm. It's available on all other websites without the cashback.

vijaynelaturi said:
Otterbox
Click to expand...
Click to collapse
loved that one highlighted at official oneplus site but way to exp

here are some recommendations,,
#2, #9, #10
http://www.myandroidphone.in/2017/01/oneplus-3t-back-cover-cases.html

I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.

Spigen's Rugged Armor case won't protect anything, it's a visual only improvement, there isn't even any padding on the corners.
Otterbox is the best protection you can get but it is a lot bulkier in your pocket.
Look on YouTube for drop tests with otterbox cases, there are people dropping them from the third floor of buildings with only light scratches.

IF u want transparent, nothing better than this exsits quality and looks wise
http://www.amazon.in/OnePlus-Spigen-Hybrid-Crystal-K03CS20616/dp/B01H3PF2AM
u get it cheaper here
https://paytm.com/shop/p/spigen-one...ar-k03cs20616-MOBSPIGEN-ONEPLSPIG2456446710B2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
available in 524 on Paytm.
Amazon it's 900
Sent from my Redmi Note 3 using Tapatalk

I am using the Original Glass screen protector along with the Original case as shown in the video here:- https://www.youtube.com/watch?v=ks4Zn9Pe-ls
Let me know how you like it!

try the spigen armor with carbon fiber it's matte back and has a pretty sleek design found one on ebay for 15$ but the one downside to the case is that it has these bumps under the hardware button covers which constantly puts slight pressure on the power button which caused a problem on older samsung devices with turning off on its own later down the road. to fix this problem I just took a file and pliers and removed the bumps that were under the hardware button covers. this can be done on all cases to prevent any chance of the phone have a problem with turning off on its own later

I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these

samsexy98 said:
I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these
Click to expand...
Click to collapse
i am using spigen myself, the cut outs r perfect, No issue whatsoever in plugging anything!

ONEPLUS official Ebony back case.
no bulk and looks amazing.
not much protection though, just for the looks.

NirajGajjar said:
I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.
Click to expand...
Click to collapse
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?

grasshop3r said:
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?
Click to expand...
Click to collapse
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.

NirajGajjar said:
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.
Click to expand...
Click to collapse
Thanks! I'll get just that one. I anyway have some oneplus store credits
I'll keep the company provided, pre-applied screen protector ON till it lasts. Then I'll keep the screen bare. Just the back cover will be good.
This is my first OP device and will be my first purchase through the OP India store.

Try the cruzerlite bugdroid covers they are good

best cases?

Who has a case that they recommend ? Please include a link. I love the spigen case for my P9 but don't see it available fot the P10 plus.

austriker27 said:
Who has a case that they recommend ? Please include a link. I love the spigen case for my P9 but don't see it available fot the P10 plus.
Click to expand...
Click to collapse
i guess other than Spigen..your best bet would be UAG

I got one on amazon that I really like : Huawei P10 Plus Case,Wellic High-end Carbon Fiber Back Case Cover for Huawei P10 Plus (Black) https://www.amazon.com/dp/B06XYHLD3Y/ref=cm_sw_r_cp_apa_nMjbzb47JP5H4

Pretty sure there's no carbon fibre in those cases, it will be tpu printed to look like CF.

Troute said:
Pretty sure there's no carbon fibre in those cases, it will be tpu printed to look like CF.
Click to expand...
Click to collapse
Agreed. But it feels nice

I have this case and it's pretty decent. Like the feel of the side of the case. Also nice that it covers the charging port and auxillary port as well.
Huawei P10 Plus Case, Ringke [FUSION] Tough PC Back TPU Bumper [Drop Protection/Shock Absorption Technology][Attached Dust Cap] Raised Bezels Protective Cover For Huawei P10 Plus - Ink Black https://www.amazon.com/dp/B06W5JN6ZZ/ref=cm_sw_r_cp_apa_d.QbzbJ9FAC6R

AllTheWay said:
I have this case and it's pretty decent. Like the feel of the side of the case. Also nice that it covers the charging port and auxillary port as well.
Huawei P10 Plus Case, Ringke [FUSION] Tough PC Back TPU Bumper [Drop Protection/Shock Absorption Technology][Attached Dust Cap] Raised Bezels Protective Cover For Huawei P10 Plus - Ink Black https://www.amazon.com/dp/B06W5JN6ZZ/ref=cm_sw_r_cp_apa_d.QbzbJ9FAC6R
Click to expand...
Click to collapse
I usually love ringke cases but found the one for the P9 to be pretty slippery and slick. Like it made the device too slippery to hold for me. How's the grip of yours ?

https://www.amazon.it/gp/product/B06XNV3WPL/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

eternauta1949 said:
https://www.amazon.it/gp/product/B06XNV3WPL/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How do you like it??

austriker27 said:
Agreed. But it feels nice
Click to expand...
Click to collapse
I have a Tudia branded version of it, you're right it does feel nice, just enough grip without being rough.

Bought a couple more cases, just for variety, both from Amazon UK (pictures from there too).
First one looks like it's a two piece but isn't, the black rubber bits are a permanent part of the shell. The stand is quite stiff so it stays in place at different angles, looks good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 12:59 PM ---------- Previous post was at 12:56 PM ----------
The second hasn't arrived yet but I liked the techno look it has. Both were about £6.95 - The J&D arrived, it's a proper two part case with a hard rubber inner. The buttons are incorporated into the design as chunky blocks, very nice. Not so nice are the port covers on the base. Because the rubber is hard they don't fit very well, easy solution was to cut them off since I don'r need them anyway.

austriker27 said:
How do you like it??
Click to expand...
Click to collapse
Just received mine 2 days ago. Feels good in the hand. Very slim profile so it does not add much to the device. Has a good grip surprisingly.
* Join Huawei P10/P10+ WhatsApp Group *

austriker27 said:
I usually love ringke cases but found the one for the P9 to be pretty slippery and slick. Like it made the device too slippery to hold for me. How's the grip of yours ?
Click to expand...
Click to collapse
Pretty slick as well.
I am going to order a case from UAG. I have used them in the past and have found them very good.
https://urbanarmorgear.com/products/huawei-p10-plus

Well just got my UAG case. Thanks Amazon for free same day delivery. Really like this case. Great feel to it and doesn't add much bulk at all.

Using a Spigen rugged armor right now though I'm tempted to grab a uag. Have one on my mate 9 - feel it actually adds too much bulk to that already huge ass phone but the P10 plus is a much more reasonably sized device.

I more like ultra thin cases and skins. I half heartedly ordered this case from ali express and it turned out to be a complete gem. Very sleek premium feel and the price is just unbelievable! Peel or Shumuri would easily charge 5x for this case. Anyway, here is the link:
CAFELE soft Case For huawei p10 cases TPU silicon Slim Back Protect Skin Ultra Thin Phone Cover for huawei p10 plus case shell
http://s.aliexpress.com/imuIJBBf
Some photos below, but i can tell the photos dont do justification here... The case is much nicer in real.
Cheers!

Cases i my region are far and few between...mostly because the release was delayed 2 months. It's coming out THIS month but I've had my P10 plus for a month now and used it as my primary phone for the last week. I'd had to say without question my favourite across any phone is the South Korea RINGKE FUSION.
It's mostly a range of CLEAR cases, so if you're looking for colour, look elsewhere
It shows off the phone how it was meant to be shown
Is a great mixture of TPU silicone (side/edges/buttons etc) and hard plastic (back)
The 4 corners/bumpers have airpockets to absorb impact of drops
1.5mm raised at the back to prevent the camera hitting the ground and cracking
If you like this sort of thing - has soft TPU dust pocket covers for 3.5mm jack and USB port
http://www.ebay.com.au/sch/i.html?_...lus.TRS0&_nkw=Ringke+fusion+p10+plus&_sacat=0
RoOSTA

I have several cases and I really love this blue one with sandstone finish : it feels good in hands and less slippy than other cases. The only con is it hides the phone's beauty.
The original one that came with the phone is good too but the only thing I don't like about it is the camera part : it offers no real protection to the lenses, the entire area on the case is empty there.

I have the red version of this
https://www.amazon.co.uk/gp/aw/d/B0...+plus+case&dpPl=1&dpID=41Hh9e7edaL&ref=plSrch
I need something to protect it from knocks drops and dust etc as there is a high chance of that at work.
The case is fudging huge and heavy. However its a trade I'm willing to accept to keep my phone safe.

Couldn't resist the urge to order a UAG Plasma case. They just offer great protection while not adding a ridiculous amount of bulk. Whilst some of their older designs are kind of ugly the newer stuff is sexy as.

flip case with auto wake?

Anyone found a flip case with auto wake feature for the oneplus 7 pro?
Too bad OnePlus does not provide this cover with launch ?

Not seen the OnePlus version anywhere although there are some flip cases around in both Amazon and eBay.. I'm also waiting for the OnePlus case though..

hagar006 said:
Not seen the OnePlus version anywhere although there are some flip cases around in both Amazon and eBay.. I'm also waiting for the OnePlus case though..
Click to expand...
Click to collapse
The ones I saw on Amazon and Ebay are without the auto wake magnet function, still not found a nice flip case....

I ordered this one - https://nillkin.org/smartphones-acc...s-7-pro-accessories/nillkin-oneplus-7-pro-qin. Don't know if it has a magnet but will tell here when I receive it if someone does not beat me to it.
Sent from my GM1913 using Tapatalk

Taiffari said:
I ordered this one - https://nillkin.org/smartphones-acc...-7-pro-accessories/nillkin-oneplus-7-pro-qin. Don't know if it has a magnet but will tell here when I receive it if someone does not beat me to it.
Click to expand...
Click to collapse
Thanx, not mentioned it on the site. I hope so

These look nice if a little on the expensive side.. I'd have sprung for one if there was some protection top and bottom. Still might.
https://www.stilgut.com/oneplus-7-pro-cases/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

In order to a do auto-wake the phone itself has to have a sensor for that magnet. The Galaxy phones have that, for example, but I didn't think the 7 pro has one. I'd love to be corrected if it does.

ph1dft said:
Thanx, not mentioned it on the site. I hope so
Click to expand...
Click to collapse
It did not have a magnet.
Sent from my GM1913 using Tapatalk

Taiffari said:
It did not have a magnet.
Click to expand...
Click to collapse
Thanx for the info

There are apps that will utilize the proximity sensor on your phone and turn the screen on when opening the case. I used the below app on my S8+ with my Otterbox Strada, it worked without any issues.
https://play.google.com/store/apps/details?id=com.luutinhit.smartscreenonoff

kip256 said:
There are apps that will utilize the proximity sensor on your phone and turn the screen on when opening the case. I used the below app on my S8+ with my Otterbox Strada, it worked without any issues.
https://play.google.com/store/apps/details?id=com.luutinhit.smartscreenonoff
Click to expand...
Click to collapse
I know but I don't like that... Still waiting for a flip cover with auto wake..

Ordered this on ebay:
https://www.ebay.com/sch/i.html?_fr...+Leather+Card+Wallet+Slim+Case+Cover&_sacat=0
It looks similar to my OP6 flip case ordered directly from OnePlus that has auto wake/sleep.

williamthardy said:
Ordered this on ebay:
https://www.ebay.com/sch/i.html?_fr...+Leather+Card+Wallet+Slim+Case+Cover&_sacat=0
It looks similar to my OP6 flip case ordered directly from OnePlus that has auto wake/sleep.
Click to expand...
Click to collapse
Looks nice, hope it has the auto wake feature...

So I have 3 flip cases currently, ordered the 4th (the one that looks like the OEM flip case) that's going to be here next week.
https://www.ebay.com/itm/Flip-Leath...0?pageci=baa7ced3-ad35-4521-be04-34ce47e05e52
https://www.ebay.com/itm/ViLi-DMX-S...680296?varId=522273371046&txnId=2247788086012
https://www.ebay.com/itm/NILLKIN-PU...861681?varId=472635728637&txnId=2013361230007
You can see them all in the attached jpg.
They each have their pros and cons, none of them are ideal (the Otterbox Strada is my ideal case, a tank that's lasted my old S7e the past 3 years) and NONE ARE SMART COVERS.
The far left in navy is the one on my device right now. Like the form, the color, and corner protection. The drawback is that I question how screen protector friendly it is, as the sides actually curl in PAST the factory-applied protector film. Don't know if the case will will fit with a TGSP installed. My guess is it won't, which is why I'm using it now.
The middle one has the most coverage along the sides, but it's thin compared to the case I just discussed. From my experience with its 6T counterpart, it's relatively durable so it will likely be my go-to when I apply a TGSP. Don't like the form (full-length spine where it folds, front cover is not merged into the back case) as much as the other two.
The one on the right is the Nillkin, a brand I've used since... my Nexus 6? Love the form factor, hate the durability. Expect the case to last for about 3 months before it's starts cracking, chipping, tearing. This one lasted 3 minutes -- one corner cracked when i put the phone in. WTF.

reaper000 said:
So I have 3 flip cases currently, ordered the 4th (the one that looks like the OEM flip case) that's going to be here next week.
https://www.ebay.com/itm/Flip-Leath...0?pageci=baa7ced3-ad35-4521-be04-34ce47e05e52
https://www.ebay.com/itm/ViLi-DMX-S...680296?varId=522273371046&txnId=2247788086012
https://www.ebay.com/itm/NILLKIN-PU...861681?varId=472635728637&txnId=2013361230007
You can see them all in the attached jpg.
They each have their pros and cons, none of them are ideal (the Otterbox Strada is my ideal case, a tank that's lasted my old S7e the past 3 years) and NONE ARE SMART COVERS.
The far left in navy is the one on my device right now. Like the form, the color, and corner protection. The drawback is that I question how screen protector friendly it is, as the sides actually curl in PAST the factory-applied protector film. Don't know if the case will will fit with a TGSP installed. My guess is it won't, which is why I'm using it now.
The middle one has the most coverage along the sides, but it's thin compared to the case I just discussed. From my experience with its 6T counterpart, it's relatively durable so it will likely be my go-to when I apply a TGSP. Don't like the form (full-length spine where it folds, front cover is not merged into the back case) as much as the other two.
The one on the right is the Nillkin, a brand I've used since... my Nexus 6? Love the form factor, hate the durability. Expect the case to last for about 3 months before it's starts cracking, chipping, tearing. This one lasted 3 minutes -- one corner cracked when i put the phone in. WTF.
Click to expand...
Click to collapse
I'd be willing to pay Otterbox more money for a OP 7 Pro Strada case. Such a great case.

Brilliant review reaper000 thanks very much.
Dammit OnePlus get on with the official flip case.
I'm waiting for the Nillkin to be delivered. Oh no! Bad luck with that. Take your advice on the durability.
I actually prefer the full spine so that middle one might suit me. Prefer the complete cover on all sides too. My OP3 somehow got scuffed top and bottom in the official case. I don't seem to need the padding. Never considered the black but that looks ok.
Oh that damn kick stand fold.. Dino why do many cases have that. Hate it. Would try and glue the thing down.
Thanks again. [emoji106][emoji106]
Sent from my A0001 using Tapatalk

This one says it's smart wake/sleep:
https://www.ebay.com/itm/Official-F...5T-6T-7/153444097176?var=&hash=item23b9fb1c98

Just received the Nilkin flip case in black.
Pleasantly surprised by the quality. Soft cloth inner. Hard plastic full protection holster for the phone. Accurate cut outs. Hard nylon backed combined fake leather back and cover that folds quite flat and out of the way.
Doesn't sleep or wake, although the proximity sensor does already deal with that so not an issue for me. No magnet at all to help the case stay closed.. this is a smart minimalist cover that sacrifices ruggedness.
9/10 from me
Sent from my GM1913 using Tapatalk

fr0d0#2 said:
Just received the Nilkin flip case in black.
Pleasantly surprised by the quality. Soft cloth inner. Hard plastic full protection holster for the phone. Accurate cut outs. Hard nylon backed combined fake leather back and cover that folds quite flat and out of the way.
Doesn't sleep or wake, although the proximity sensor does already deal with that so not an issue for me. No magnet at all to help the case stay closed.. this is a smart minimalist cover that sacrifices ruggedness.
9/10 from me
Sent from my GM1913 using Tapatalk
Click to expand...
Click to collapse
Can you post a link ?

williamthardy said:
This one says it's smart wake/sleep:
https://www.ebay.com/itm/Official-F...5T-6T-7/153444097176?var=&hash=item23b9fb1c98
Click to expand...
Click to collapse
It isn't mentioned on the site (maybe they removed it?).

Accessories Best case for Poco F3

Hi guys have you found a best casing for our phone?
I think for now, Ringke Fusion X is the best case for Poco F3 see video here of the casing

Nillkin "Super Frosted Shield" and "Textured Nylon Case" are awesome!
Feels high quality and perfect fit.
~7€ from China (AliExpress Nillkin Oversea Store)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you guys know a case store where they ship from Europe?
I don't want to wait 30-50 days for a case to arrive

FYI: There's one more topic about cases already.
I got myself that one for 3$ (glass included in price , which is pretty ****ty fitted)
It's not bad, but very slippery and the design is not the best.
Yesterday I ordered a new NILLKIN CAMSHIELD for like 13$ and I hope it will be better. If not I can just send it back for free .

Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.

billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.

osemoka said:
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.
Click to expand...
Click to collapse
Mine doesn't experience with that problem. Without using this particular case, the proximity sensor is fine. Even with the fabric case by nilkin, it's fine as well. However, when I'm using camshield, the proximity sensor is not working at all. So I was wondering about the location of the sensor. Tried adjusting my tempered glass didn't help too.
Thanks first!

I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad

+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.

Jinzuken said:
I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad
Click to expand...
Click to collapse
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nemix77 said:
+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.
Click to expand...
Click to collapse
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen

osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
Spigen is good man. Thick, but comfortable to handle/carry it with your arm. Its thickness will satisfy and ensure you that your phone is protected when it falls or accidentally dropped on the ground.

osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
It's elastic/rubberized but it's quite tight though. Plus, my proximity/ultrasonic sensor doesn't work well with the camshield. Fabric one by nillkin works fine though.

billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
Yes. It fkn blocks it. I will send it back... And wait for spiegen.

Hi! What do you think about this Pitaka Case like? https://m.aliexpress.com/item/1005002402489617.html?trace=wwwdetail2mobilesitedetail

I ordered this one. It will probably come tomorrow.
https://a.aliexpress.com/_mPfw2pL

Since the phone itself is thin, I prefer the built in jelly case. But I ordered some cases from the local shop that looks like this:

Hello all nice to share thanks.... here are mine:
I have 2 of these, both are frosted rear with black or dark blue frames. Perfect fit including the fingerprint sensor and no issues blocking other areas. ¥11/€1.4/£1.23 each
Also have this all black and black with blue ring circle. The ring flips up to 180 degrees and rotates 360. Again, the fit is perfect though I don’t care for the writing but it’s not as obvious as in this picture. The centre is a so you could use it on a car mount but I sold my car so donknow how firm it is. ¥11.5/€1.5/£1.3 each
Lastly have this Nillken on order so need a couple of days till it arrives. ¥35/€4.5/£3.9 each
All three were purchased from Taobao, and you can search using the pictures to find numerous sellers. I’m in Hong Kong so there is a little more for transshipment postage but it’s very cheap.

I bought 2 sandstone cases, but I'm more for the aesthetics than for the protection.
https://es.aliexpress.com/item/4000061622675.html?spm=a2g0s.9042311.0.0.455863c0kHj4Bu

Just received the Nilkin Nature case. nice looking and better protection than the provided one.
https://www.aliexpress.com/item/1005002386841661.html?spm=a2g0s.9042311.0.0.225e6c37nEwch4
I have the transparent one.

I got the nillkin one sent with my device from poco. Really nice tight fit, feels secure. Ridges on the edges stand proud to protect the screen and the lens

Question Full body skin

If anyone comes across a full body skin let us know, been looking but nothing ATM.
Demand etc are only doing back skin by the looks, and even they don't ship till the end of the month.
Got a cheap case to see what I think,but the huge lip on the cover screen is just plain annoying when using gestures.

Isn't the back the only part that's really skinnable anyway since the front and inside are all screen?

Was thinking of skinning the sides etc, go caseless then. Used to do it back in the day, just not seen one for a while

Nothing wrong with going caseless and using a belt carried pouch like this one:
https://www.amazon.com/dp/B09DKPT43J?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=1HJSNY004CV69&amp&sprefix=fold+3+pouc
I've been using that with my Fold 3 for several months and it has held up well. The flap is held with magnets instead of velcro so no noisy tearing sound when you need to fetch your device!

I've whipped together a 3m clear back protector and a spigen screen protector. My 3m is a bit thick to use on the hinge, and to be fair I can't really be bothered with all the exacting measurements that would be required to get it to fit and not catch etc. As for the frame that too I haven't got the energy to do atm. Might look at some ultra thin cases and see what's about although the hinge is still exposed on them I suppose. I'll keep an eye out

I ordered a whitestone dome front screen protector since the cheap buggers dont ship the fold 4 with one now (used one on my fold 3 as well) and the kit came with a film protector for the hinge as well. Dont have it yet so cant comment on whether its decent or not though

I tried it, caught on the protector about 1/4 way down back side edge, may have been me installing it, but hey

force70 said:
I ordered a whitestone dome front screen protector since the cheap buggers dont ship the fold 4 with one now (used one on my fold 3 as well) and the kit came with a film protector for the hinge as well. Dont have it yet so cant comment on whether its decent or not though
Click to expand...
Click to collapse
I ordered that and sending it back. The hinge protector was crap. The front glass and my case didn't agree either.

the_ape said:
If anyone comes across a full body skin let us know, been looking but nothing ATM.
Demand etc are only doing back skin by the looks, and even they don't ship till the end of the month.
Got a cheap case to see what I think,but the huge lip on the cover screen is just plain annoying when using gestures.
Click to expand...
Click to collapse
I came across Gadgetshieldz where they have z fold 4 skins and they give skins for the back and the sides. Check it out,
Samsung Galaxy Z Fold4 Skins, Wraps, Decals & Covers | Gadgetshieldz®
Best Samsung Galaxy Z Fold4 skins, Wraps, Decals with unique customization | Skinnova makes the most precise Carbon fiber skins, Wooden skins, Leather skins, Sandstone skins, and Marble skins for the Samsung Galaxy Z Fold4. Ships worldwide. Buy Online.
www.gadgetshieldz.com

Anybody come across a thin case for the phone that also has hinge protection? The spen/cover is too bulky for me. Or something separate to protect the hinge.

Those skins look interesting. Would like to see a pic or two after someone installs them.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ordered a few, see what they are like.

dbrand is out!
Galaxy Z Fold 4 Skins, Wraps & Covers » dbrand
When people want Z Fold 4 skins, they come to dbrand. Why? We've got the best customizable Samsung Galaxy Z Fold 4 skin and free shipping. Buy yours today.
dbrand.com

ycats said:
Those skins look interesting. Would like to see a pic or two after someone installs them.
Click to expand...
Click to collapse
I've ordered them and after I get the phone and the skins I'll share some images!

the_ape said:
View attachment 5695235
Ordered a few, see what they are like.
Click to expand...
Click to collapse
Nice, they are good cause I have them on my old phone!

Got the leather phone skins from Gadgetshieldz for my Fold 4 and it is looking classic and cool! The cutout is perfect and sticks very well...

Maskman_101 said:
Got the leather skins from Gadgetshieldz for my Fold 4 and it is looking classic and cool! The cutout is perfect and sticks very well...
View attachment 5706999View attachment 5707001View attachment 5707003
Click to expand...
Click to collapse
Got mine too, works well. Although (I know...) samsung case a very tight fit over it

the_ape said:
Got mine too, works well. Although (I know...) samsung case a very tight fit over it
Click to expand...
Click to collapse
Is it possible to apply case on top of these skins. Do they give skin for hinge too? If not any other brands have skin for hinge?

the_ape said:
Got mine too, works well. Although (I know...) samsung case a very tight fit over it
Click to expand...
Click to collapse
Yeah, the skins are thin but it puts on an extra layer so the case will be a tight fit!

eswar539 said:
Is it possible to apply case on top of these skins. Do they give skin for hinge too? If not any other brands have skin for hinge?
Click to expand...
Click to collapse
If you put skin on the hinge, you can't fold the phone or it'll be hard to fold! Maybe a case that covers the hinge with a gap is doable!