Anyone found a flip case with auto wake feature for the oneplus 7 pro?
Too bad OnePlus does not provide this cover with launch ?
Not seen the OnePlus version anywhere although there are some flip cases around in both Amazon and eBay.. I'm also waiting for the OnePlus case though..
hagar006 said:
Not seen the OnePlus version anywhere although there are some flip cases around in both Amazon and eBay.. I'm also waiting for the OnePlus case though..
Click to expand...
Click to collapse
The ones I saw on Amazon and Ebay are without the auto wake magnet function, still not found a nice flip case....
I ordered this one - https://nillkin.org/smartphones-acc...s-7-pro-accessories/nillkin-oneplus-7-pro-qin. Don't know if it has a magnet but will tell here when I receive it if someone does not beat me to it.
Sent from my GM1913 using Tapatalk
Taiffari said:
I ordered this one - https://nillkin.org/smartphones-acc...-7-pro-accessories/nillkin-oneplus-7-pro-qin. Don't know if it has a magnet but will tell here when I receive it if someone does not beat me to it.
Click to expand...
Click to collapse
Thanx, not mentioned it on the site. I hope so
These look nice if a little on the expensive side.. I'd have sprung for one if there was some protection top and bottom. Still might.
https://www.stilgut.com/oneplus-7-pro-cases/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In order to a do auto-wake the phone itself has to have a sensor for that magnet. The Galaxy phones have that, for example, but I didn't think the 7 pro has one. I'd love to be corrected if it does.
ph1dft said:
Thanx, not mentioned it on the site. I hope so
Click to expand...
Click to collapse
It did not have a magnet.
Sent from my GM1913 using Tapatalk
Taiffari said:
It did not have a magnet.
Click to expand...
Click to collapse
Thanx for the info
There are apps that will utilize the proximity sensor on your phone and turn the screen on when opening the case. I used the below app on my S8+ with my Otterbox Strada, it worked without any issues.
https://play.google.com/store/apps/details?id=com.luutinhit.smartscreenonoff
kip256 said:
There are apps that will utilize the proximity sensor on your phone and turn the screen on when opening the case. I used the below app on my S8+ with my Otterbox Strada, it worked without any issues.
https://play.google.com/store/apps/details?id=com.luutinhit.smartscreenonoff
Click to expand...
Click to collapse
I know but I don't like that... Still waiting for a flip cover with auto wake..
Ordered this on ebay:
https://www.ebay.com/sch/i.html?_fr...+Leather+Card+Wallet+Slim+Case+Cover&_sacat=0
It looks similar to my OP6 flip case ordered directly from OnePlus that has auto wake/sleep.
williamthardy said:
Ordered this on ebay:
https://www.ebay.com/sch/i.html?_fr...+Leather+Card+Wallet+Slim+Case+Cover&_sacat=0
It looks similar to my OP6 flip case ordered directly from OnePlus that has auto wake/sleep.
Click to expand...
Click to collapse
Looks nice, hope it has the auto wake feature...
So I have 3 flip cases currently, ordered the 4th (the one that looks like the OEM flip case) that's going to be here next week.
https://www.ebay.com/itm/Flip-Leath...0?pageci=baa7ced3-ad35-4521-be04-34ce47e05e52
https://www.ebay.com/itm/ViLi-DMX-S...680296?varId=522273371046&txnId=2247788086012
https://www.ebay.com/itm/NILLKIN-PU...861681?varId=472635728637&txnId=2013361230007
You can see them all in the attached jpg.
They each have their pros and cons, none of them are ideal (the Otterbox Strada is my ideal case, a tank that's lasted my old S7e the past 3 years) and NONE ARE SMART COVERS.
The far left in navy is the one on my device right now. Like the form, the color, and corner protection. The drawback is that I question how screen protector friendly it is, as the sides actually curl in PAST the factory-applied protector film. Don't know if the case will will fit with a TGSP installed. My guess is it won't, which is why I'm using it now.
The middle one has the most coverage along the sides, but it's thin compared to the case I just discussed. From my experience with its 6T counterpart, it's relatively durable so it will likely be my go-to when I apply a TGSP. Don't like the form (full-length spine where it folds, front cover is not merged into the back case) as much as the other two.
The one on the right is the Nillkin, a brand I've used since... my Nexus 6? Love the form factor, hate the durability. Expect the case to last for about 3 months before it's starts cracking, chipping, tearing. This one lasted 3 minutes -- one corner cracked when i put the phone in. WTF.
reaper000 said:
So I have 3 flip cases currently, ordered the 4th (the one that looks like the OEM flip case) that's going to be here next week.
https://www.ebay.com/itm/Flip-Leath...0?pageci=baa7ced3-ad35-4521-be04-34ce47e05e52
https://www.ebay.com/itm/ViLi-DMX-S...680296?varId=522273371046&txnId=2247788086012
https://www.ebay.com/itm/NILLKIN-PU...861681?varId=472635728637&txnId=2013361230007
You can see them all in the attached jpg.
They each have their pros and cons, none of them are ideal (the Otterbox Strada is my ideal case, a tank that's lasted my old S7e the past 3 years) and NONE ARE SMART COVERS.
The far left in navy is the one on my device right now. Like the form, the color, and corner protection. The drawback is that I question how screen protector friendly it is, as the sides actually curl in PAST the factory-applied protector film. Don't know if the case will will fit with a TGSP installed. My guess is it won't, which is why I'm using it now.
The middle one has the most coverage along the sides, but it's thin compared to the case I just discussed. From my experience with its 6T counterpart, it's relatively durable so it will likely be my go-to when I apply a TGSP. Don't like the form (full-length spine where it folds, front cover is not merged into the back case) as much as the other two.
The one on the right is the Nillkin, a brand I've used since... my Nexus 6? Love the form factor, hate the durability. Expect the case to last for about 3 months before it's starts cracking, chipping, tearing. This one lasted 3 minutes -- one corner cracked when i put the phone in. WTF.
Click to expand...
Click to collapse
I'd be willing to pay Otterbox more money for a OP 7 Pro Strada case. Such a great case.
Brilliant review reaper000 thanks very much.
Dammit OnePlus get on with the official flip case.
I'm waiting for the Nillkin to be delivered. Oh no! Bad luck with that. Take your advice on the durability.
I actually prefer the full spine so that middle one might suit me. Prefer the complete cover on all sides too. My OP3 somehow got scuffed top and bottom in the official case. I don't seem to need the padding. Never considered the black but that looks ok.
Oh that damn kick stand fold.. Dino why do many cases have that. Hate it. Would try and glue the thing down.
Thanks again. [emoji106][emoji106]
Sent from my A0001 using Tapatalk
This one says it's smart wake/sleep:
https://www.ebay.com/itm/Official-F...5T-6T-7/153444097176?var=&hash=item23b9fb1c98
Just received the Nilkin flip case in black.
Pleasantly surprised by the quality. Soft cloth inner. Hard plastic full protection holster for the phone. Accurate cut outs. Hard nylon backed combined fake leather back and cover that folds quite flat and out of the way.
Doesn't sleep or wake, although the proximity sensor does already deal with that so not an issue for me. No magnet at all to help the case stay closed.. this is a smart minimalist cover that sacrifices ruggedness.
9/10 from me
Sent from my GM1913 using Tapatalk
fr0d0#2 said:
Just received the Nilkin flip case in black.
Pleasantly surprised by the quality. Soft cloth inner. Hard plastic full protection holster for the phone. Accurate cut outs. Hard nylon backed combined fake leather back and cover that folds quite flat and out of the way.
Doesn't sleep or wake, although the proximity sensor does already deal with that so not an issue for me. No magnet at all to help the case stay closed.. this is a smart minimalist cover that sacrifices ruggedness.
9/10 from me
Sent from my GM1913 using Tapatalk
Click to expand...
Click to collapse
Can you post a link ?
williamthardy said:
This one says it's smart wake/sleep:
https://www.ebay.com/itm/Official-F...5T-6T-7/153444097176?var=&hash=item23b9fb1c98
Click to expand...
Click to collapse
It isn't mentioned on the site (maybe they removed it?).
Related
So I just got he Diztronic Case for my new Nexus 5 today and here's my thoughts on it. I've been a Diztronic case user for sometime now; had it on previous devices such as my S3. One thing I love about Diztronic is that they are more substance than flash when it comes to their cases.
Packaging:
One thing you will notice when you get the packaging is that, well there isn't much to say as its in a plastic wrap, with a cardboard cutout placeholder for your phone. They spent the money were it needs to go; on the case itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Build Quality/Design
As expected from Diztronic, the case is a built top notch using a soft but firm flexible TPU material. It has a two tone appearance where the edge/frame is a shiny glossy black (along with the Diztronic logo on the back) where the rest of the case is a soft grippy matte black on the back and sides. A thing to point out is the nice feel the matte finish has. It almost feels like the Nexus 5 back without a case. It just feels good. One thing I like is that Diztronic did not plaster their name all over the case like some case manufacturers do. Just one simply logo at the back near the bottom.
The cutouts are all in the perfect location and aligned right. The cutouts for all ports/mics/speakers are spot on. One thing I would like to point out is the cutout for the headphone jack. It's bigger than other cases I've seen and I like that. It allows for headphone plugs off varying sizes to be used with our phone. Many times a plug will be too big to be used with certain cases and the phone would have to removed from the case to use said plug. The cutout is a large nice square cutout. So thumbs up to Diztronic for that. Also, the microusb port cutout is large also, allowing for oem and aftermarket micro usb plugs to be used. Which is really like as I have plugs and charges of all sorts of sizes around the house, bag and car.
One thing that did differ from the S3 Diztronic case is that there is no cutouts for the buttons; volume and power. I'm sure a lot of us went the super cheap route before and got a tpu case off of ebay with no cutouts and it was just plain misery trying to press the buttons. That was one of the big pluses for me on the S3 case and was doubtful and wary about no cutouts on the Nexus 5 case. Yet, Diztronic has pulled through and made pressing the buttons easy and nice even without the cutouts. The fake buttons on the case to mimic the buttons on the phone are very nicely designed and implemented. They actually look and feel like real buttons and not just some bump on the case like the cheaper tpu cases.
Another thing I liked is that the edges are raised to protect the phone if you place it face down on the table. So no scratching the screen when doing so.
Also, unlike the slim cases from Spigen and Ringke (other cases I considered) is that it has decent protection all the way around the phone. The slim cases protect the sides but not so much the top and bottom. Sure its a little bulkier and thicker but my mind is a little more at ease with the added protection.
Got the same case on my N5 as well. Had one on my EVO 4G LTE as well. Decent case all around. Nice review.
johnny15 said:
Got the same case on my N5 as well. Had one on my EVO 4G LTE as well. Decent case all around. Nice review.
Click to expand...
Click to collapse
Thanks I appreciate it!
Yeah one of the better cases I've used on any device. Great customer support too, anytime I had an issue they always were quick and courteous.
Thanks for the review. My phone slipped out of my hand today and I was able to catch it with my foot before it fell the rest of the approx. 6 inches to a tile floor. The back cover popped open a little bit, but it was otherwise unscathed. I took that as my first and only warning from the phone Gods to put a case on it so I just bought one of these based on your review.
ComposMentis said:
Thanks for the review. My phone slipped out of my hand today and I was able to catch it with my foot before it fell the rest of the approx. 6 inches to a tile floor. The back cover popped open a little bit, but it was otherwise unscathed. I took that as my first and only warning from the phone Gods to put a case on it so I just bought one of these based on your review.
Click to expand...
Click to collapse
yeah I always recommend a case. I don't like otter boxes or tank sized cases but I do like a medium between super slim and otterbox. I'm sure you'll like the case!
How much of the screen does the edge/lip of the case cover? Any use this with a screen protector?
Covers very little of the screen. I am using with with the spigen ultra crystal with no problems. I think it's a much more functional case than the official bumper.
Sent from my Nexus 5 using Tapatalk
Yeah, if you can't tell my phone has a screen protector on it. I'm using the xtremeguard protector on it
Sent from my Nexus 5 using Tapatalk
Does anyone have any pictures of this case (either black or clear, both would be nice though) on a white Nexus 5? Looking to purchase this case just not sure in which color
funky_snowman said:
Covers very little of the screen. I am using with with the spigen ultra crystal with no problems. I think it's a much more functional case than the official bumper.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The skinomi screen protector I got has 1mm margin to the edge of the screen so any case lip that covers more than 1mm will start to push on the protector.
Would you say the it covers 1mm or less of the screen?
Yes, I think that's accurate
Sent from my Nexus 5 using Tapatalk
Does this case feels like the soft black of the phone? How is it with fingerprints?
Sent from my Nexus 5 using Tapatalk
Momotani-Hitoshi said:
The skinomi screen protector I got has 1mm margin to the edge of the screen so any case lip that covers more than 1mm will start to push on the protector.
Would you say the it covers 1mm or less of the screen?
Click to expand...
Click to collapse
I'm curious as well about the case pushing against the screen protector. I would like to know if the case causes the screen protector to lift away from the screen. This is a problem I have with the spigen.
Thanks
Amazon has the black with prime shipping, I'll make sure to post my thoughts
Sent from my Nexus 10 using xda app-developers app
Looks like you lucked out and got the second revision, seems like a lottery at Amazon right now but good to see they started shipping them. Nice big photos and thanks for taking the time. I personally decided to pass on Diz this time due to the QC issues and covered up buttons.
FYI there's a thread a few pages long dedicated to the progression of this case including other pics and reviews: http://forum.xda-developers.com/showthread.php?t=2490294 :good:
After using a spigen neo hybrid for a few days I've gone back to the diztronic, fits like a glove. And almost feels like there's no case.
Sent from my Nexus 5 using xda app-developers app
Is it hard to take off? I've read that some people actually damaged the exterior back and edges by taking off their cases...
No its not hard to take off... I don't go side to side... I go from bottom to top. So insert the bottom of the phone first then the top. Yeah i was worried about the revisions but Diztronic emailed me that all new cases should be the revised version
Sent from my Nexus 5 using Tapatalk
Sucks that from Italy apparently there is no way to get my hands on one since no euro amazon sells it and they directly also dont mail it to Italy or other european countries....
krash183 said:
No its not hard to take off... I don't go side to side... I go from bottom to top. So insert the bottom of the phone first then the top. Yeah i was worried about the revisions but Diztronic emailed me that all new cases should be the revised version
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you tried eBay through the seller "post3rs" ?
Sent from my Nexus 5 using xda app-developers app
Everyone,
Just want to share my newly just bought case for my LG G Pad 8.3 Black bought from Amazon for $39.99.
Overall design, it's a very slim profile case, nice feel to it, fit perfectly to the tablet. The smart on/off feature work perfectly, you have to enable Smart Cover in Accessories setting in order for it to work. As far as standing, it work as in the picture, but not a big fan of it, look like it's working fine on carpet, but I haven't try to stand it on a smooth surface yet. But I bought this case not for it standing feature, but it slim profile, and nicely looking with a "for LG G Pad" logo.
One thing doesn't like, when you close the cover, the flap does not have magnetic, so it's easily open not grabbing it on the right side... and not completely in plane to the tablet. But I still do like this cover a lot, it's a little bit costly, but it's does make your LG G Pad look pretty good.
Here is the link to the picture
https://plus.google.com/106112220349196613259/posts/ciGg2AZRsMb
Cám ơn for posting those pictures. That case DOES look really slick, even if the stand doesn't seem to work well. I'd like to see/hear from you how it works on a smooth surface.
Mark
I had a case like this on my Nexus 7 (2012) and the one thing I really do not like about them is that the cover does not stay closed as you mentioned. In my case I droped my Nexus the cover opened up Nexus fell screen down and shattered $200 in the trash. Since that happened to me I refuse to buy a case that does not have a Mechanical clasp on the cover of some sort. I'm actually thinking of moving to a pouch instead of a case.
Yeah, I had one like that on my Nexus 7 3G (2012). Chipped the edge metal part I was lucky that it didn't break the screen. I right away bought a cover that has an elastic strap that holds the cover closed.
rdjack21 said:
I had a case like this on my Nexus 7 (2012) and the one thing I really do not like about them is that the cover does not stay closed as you mentioned. In my case I dropped my Nexus the cover opened up Nexus fell screen down and shattered $200 in the trash. Since that happened to me I refuse to buy a case that does not have a Mechanical clasp on the cover of some sort. I'm actually thinking of moving to a pouch instead of a case.
Click to expand...
Click to collapse
I'm wondering if I could get a thin magnet & just stick it in the case? I like the feedback on the case
Bascially, yes.
http://www.pocketables.com/2013/03/tutorial-how-to-add-magnets-to-an-ipad-back-cover-case-video.html
http://howto.cnet.com/8301-11310_39-57384152-285/how-to-turn-any-case-into-an-ipad-smart-cover/
And my thanks meter needs some love, in case you're interested.
Mark
Nice pics, thanks. But basically ;
- This case is labelled as premium and doesn't have magnets !
- This case is labelled as standing but it's not able to do it on all surfaces !!
I got this case with my G Pad as gift and I must say - this is very good one.
It could work as smart cover with no problem. But I need some tries before I found out how it works in stand position
Hey guys, here's a quick fix for the floppy / insecure cover on this case. I actually had this clip laying around from my old Kindle. It was sold/used to prevent the back cover from lifting from the kindle due to stress on the powered case connector. Bought it directly off Amazon way back but not sure it's available anymore. Below is the link to the direct website, but question if they are still making this due this being for the 2010 kindle model. In any case figured I'd post to give you guys some ideas. I actually find it works quite well as the clip easy slides off and I simply put in my pocket while I use the pad. Additionally it stays put and doesn't slide off. I shaked the pad a few time and it wouldn't move. Again figured I give you guys who bought this case some ideas.
Clip website
https://smak-dab.com/Home_Page_L1P1.php
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this case looks ok but to be honest i never get cases for my gadgets..i just dont like bulking them up. I prefer getting screen protectors as they're cheaper. You can pick a screen protector for your LG pad 8.3 for around $19 from GEARMAXX on ebay. I took a couple of pics of mine:
marcotony said:
this case looks ok but to be honest i never get cases for my gadgets..i just dont like bulking them up. I prefer getting screen protectors as they're cheaper. You can pick a screen protector for your LG pad 8.3 for around $19 from GEARMAXX on ebay. I took a couple of pics of mine:
Click to expand...
Click to collapse
Would a screen protector provide any protection if you dropped the tablet or else dropped something on top of it? I think a case provides more protection in those situations.
I just got this case a few minutes ago at work. It's very nice. I like the look and feel, and it maintains the 8.3's lean form factor. I like it!
One drawback I noticed - this case messes up sound. Tablet itself has good sound quality, but with case it's "metallic", sometimes distorted.
It looks like case resonates.
Quick solution for it - put some paddnig around speakers and problem dissapears.
ripencjo said:
One drawback I noticed - this case messes up sound. Tablet itself has good sound quality...
Click to expand...
Click to collapse
Seriously ? Are you sure that you've got a G-Pad ?
The sound of this tab is HORRIBLE !
Kholargol said:
Seriously ? Are you sure that you've got a G-Pad ?
The sound of this tab is HORRIBLE !
Click to expand...
Click to collapse
Heh It seems I have very little expectations ;]
Compared to my previous tablet this one is better.
marcotony said:
this case looks ok but to be honest i never get cases for my gadgets..i just dont like bulking them up. I prefer getting screen protectors as they're cheaper. You can pick a screen protector for your LG pad 8.3 for around $19 from GEARMAXX on ebay. I took a couple of pics of mine:
Click to expand...
Click to collapse
What's the application method? Wet or dry? I've already killed one screen with a wet-application protector, so I'm a little gun-shy right now.
coleam said:
What's the application method? Wet or dry? I've already killed one screen with a wet-application protector, so I'm a little gun-shy right now.
Click to expand...
Click to collapse
This is a dry method. I picked these up as well. They were ok. I had some adhesion issues on the edges. I just replaced it today with the Evecase version. There is a 4 pack available on Amazon for $9 shipped.
http://www.amazon.com/Evecase-Clear-Anti-Glare-Screen-Protector/dp/B00H3T71N0/ref=sr_1_64?ie=UTF8&qid=1387567413&sr=8-64&keywords=lg+g+pad+8.3
I put on the Anti-glare version and like it much better. I had the Clear from GearMaxx. Showed too many fingerprints. So far the Anti-glare is working out great.
cbb77 said:
This is a dry method. I picked these up as well. They were ok. I had some adhesion issues on the edges. I just replaced it today with the Evecase version. There is a 4 pack available on Amazon for $9 shipped.
http://www.amazon.com/Evecase-Clear-Anti-Glare-Screen-Protector/dp/B00H3T71N0/ref=sr_1_64?ie=UTF8&qid=1387567413&sr=8-64&keywords=lg+g+pad+8.3
I put on the Anti-glare version and like it much better. I had the Clear from GearMaxx. Showed too many fingerprints. So far the Anti-glare is working out great.
Click to expand...
Click to collapse
Good to know - I mainly get screen protectors for reducing fingerprints (I have oily fingers, so without a protector, my screen looks like garbage after a few hours of use), so the GearMaxx one wouldn't work for me. I'll give The Evecase ones a shot.
Is this case made from leather?
dimi_dimi said:
Is this case made from leather?
Click to expand...
Click to collapse
No. The part that holds the tablet is hard plastic. The cover is a textured plastic on the outside with a soft lining.
Sent from my Nexus 5 using xda app-developers app
Ok i looked through the lets talk cases thread. Mostly everything seems to be your normal flip cover case that offers minimal corner protection when dropping. Has anyone found any good shell cases with a flip over screen protector? It would feel nice to just hold a case that offers great drop protection and screen protection withput the added bulk. When i take my note out my roocase i dont wanna put it back in. It becomes much lighter and easier to deal with.
skillzo1 said:
Ok i looked through the lets talk cases thread. Mostly everything seems to be your normal flip cover case that offers minimal corner protection when dropping. Has anyone found any good shell cases with a flip over screen protector? It would feel nice to just hold a case that offers great drop protection and screen protection withput the added bulk. When i take my note out my roocase i dont wanna put it back in. It becomes much lighter and easier to deal with.
Click to expand...
Click to collapse
you can check it out at Fommy as one of my friend purchased a shell portfolio case for his note 10.1 2014 edition....and he was quite happy with the case...so you can check there...may be you find something for which you are looking for...
Thanks
skillzo1 said:
Ok i looked through the lets talk cases thread. Mostly everything seems to be your normal flip cover case that offers minimal corner protection when dropping. Has anyone found any good shell cases with a flip over screen protector? It would feel nice to just hold a case that offers great drop protection and screen protection withput the added bulk. When i take my note out my roocase i dont wanna put it back in. It becomes much lighter and easier to deal with.
Click to expand...
Click to collapse
I too am looking for a hard case, similar to Otterbox's Commuter series, and can't seem to find any.
Jimmy2u said:
you can check it out at Fommy as one of my friend purchased a shell portfolio case for his note 10.1 2014 edition....and he was quite happy with the case...so you can check there...may be you find something for which you are looking for...
Thanks
Click to expand...
Click to collapse
That's still a soft case though.
Brian Gove said:
I too am looking for a hard case, similar to Otterbox's Commuter series, and can't seem to find any.
That's still a soft case though.
Click to expand...
Click to collapse
i havnt found one yet. Lookin for one that covers the corners and sides and that also has a screen cover that flips backwards and behind to give a good sturdy feel when standing by itself. Needs auto wakeup as well.
Vivanco Tucano Youngster. A universal case with rubber bands holding the tablet(not so stylish), a zipper, looks rain and dust proof and is padded.
Incipio might have what you're looking for
http://www.incipio.com/cases/tablet...ases/samsung-galaxy-note-10-1-2014-cases.html
Sent from my 2014 Note 10.1
allen2oo3 said:
Incipio might have what you're looking for
http://www.incipio.com/cases/tablet...ases/samsung-galaxy-note-10-1-2014-cases.html
Sent from my 2014 Note 10.1
Click to expand...
Click to collapse
That looked good, but you can't charge it with the flap closed. I called them and asked.... You have to leave it open to charge. I don't want to leave it open to charge it. I want my screen being protected while it's charging.
I'm not sure how new this case is. Otterbox is not coming out with a case, nor is gumdrop.
But Trident has one:
http://www.tridentcase.com/shop-products/kraken-ams-series-tablets/kraken-ams-case-samsung-galaxy-note-10-1-2014-edition.aspx
I'd like to wait for reviews to see how it is in real life before pulling the plug and buying!
geekmama said:
I'm not sure how new this case is. Otterbox is not coming out with a case, nor is gumdrop.
But Trident has one:
http://www.tridentcase.com/shop-products/kraken-ams-series-tablets/kraken-ams-case-samsung-galaxy-note-10-1-2014-edition.aspx
I'd like to wait for reviews to see how it is in real life before pulling the plug and buying!
Click to expand...
Click to collapse
With the total lack of hard cases out there I will be purchasing one of these since I use my tablet for work all day. Was hoping Otterbox was going to come out with one, anyone know why they aren't?
I was honestly hoping that Otterbox would come out with one too... They have one for the old Note 10.1, so you think that they would produce something for the new one. Oh well. And I agree, the lack of hard cases is somewhat disappointing. I have been searching for one ever since I got my Note 10.1 in October. Even doing an Amazon search three months later, it still yields some very poor results. The Trident case looks really nice though, I may have to purchase one of those. So thank you for posting that.
SonOfUncleSam said:
I was honestly hoping that Otterbox would come out with one too... They have one for the old Note 10.1, so you think that they would produce something for the new one. Oh well. And I agree, the lack of hard cases is somewhat disappointing. I have been searching for one ever since I got my Note 10.1 in October. Even doing an Amazon search three months later, it still yields some very poor results. The Trident case looks really nice though, I may have to purchase one of those. So thank you for posting that.
Click to expand...
Click to collapse
Just ordered the Trident case. I will post pics when and a quick review when it comes in. Also here is a code for 20% off (SPEAKS). If you use this code they will also donate 20% of the proceeds to Autism so win,win.:laugh:
geekmama said:
I'm not sure how new this case is. Otterbox is not coming out with a case, nor is gumdrop.
But Trident has one:
http://www.tridentcase.com/shop-pro...se-samsung-galaxy-note-10-1-2014-edition.aspx
I'd like to wait for reviews to see how it is in real life before pulling the plug and buying!
Click to expand...
Click to collapse
How do you know that otterbox and gumdrops aren't doing anything
Sent from my SM-P600 using XDA Premium 4 mobile app
Duly.noted said:
How do you know that otterbox and gumdrops aren't doing anything
Sent from my SM-P600 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I contacted Gumdrop and was told that they had no plans to make a case for this tablet. I have one of Gumdrops cases for my Nexus 7 2013 and its a nice product. I think I'll order the Trident case since there doesn't seem to be any other heavy duty case on the market at this time. I need the protection on the jobsite.
skillzo1 said:
Ok i looked through the lets talk cases thread. Mostly everything seems to be your normal flip cover case that offers minimal corner protection when dropping. Has anyone found any good shell cases with a flip over screen protector? It would feel nice to just hold a case that offers great drop protection and screen protection withput the added bulk. When i take my note out my roocase i dont wanna put it back in. It becomes much lighter and easier to deal with.
Click to expand...
Click to collapse
This moku has a hard plastic back and covers the corners. Thin flip cover:
http://smile.amazon.com/gp/product/B00DLZW7PM/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1
I'm using it at the moment, but may go back to just using a slip case, as I find the flip cover in my way when hand-holding.
Note10.1Dude said:
This moku has a hard plastic back and covers the corners. Thin flip cover:
http://smile.amazon.com/gp/product/B00DLZW7PM/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1
I'm using it at the moment, but may go back to just using a slip case, as I find the flip cover in my way when hand-holding.
Click to expand...
Click to collapse
How sturdy is it when standing? Does it fall easy?
skillzo1 said:
How sturdy is it when standing? Does it fall easy?
Click to expand...
Click to collapse
I've only used it on a table, where it is fine. I really don't use the stand, but rather flip the cover against the back and hold the pad.
Trident Case came in today. Much nicer than I thought it would be. I will upload some pics later.
Does the Trident case protect the screen?
here are some pics of the trident case. The installation of this case on a scale of 1 to 10 with 10 being the hardest was a 8 to me. I had dissemble and reassemble it several times to finally get everything to fit together properly. The silicone covering just did not want to stay in its place. I almost wanted to add some lubrication of some type to the silicone, but the mess after that would have been crazy. I rarely use built in screen protectors but decided to leave this one in place. I want a tempered glass protector but have not found one I like yet. I removed the screen protector from my note 3 zerolemon as soon as I unboxed it. The screen protector with this trident attracts fingerprints like crazy. I had to continuously wipe the fingerprints off during assembly. Very annoying. After getting everything together this case looks alot better than I imagined it would. This case is exactly what I was looking for. I use my tablet for work. I use the tablet so customers can sign invoices. I then am able to email signed documents immediately for invoicing or approval. Another benefit to this case is the sound channeling ports. These ports direct sound to the front of the tablet. Music sounds better and louder. Next during work will be the real test.
So, I was looking for a new skin on my phone when I realized that I didn't want to do a wrap. If you're like me, you'll spend $10 and then remove the skin in like a week. After that you'll have to buy another one if you want to go through the process again. I'm not 100% into cases because of bulk and this is a damn sexy phone.
I scoured a few different places looking for a white thin case when I came across this: ELAGO THIN CASE
Here are my pros:
Fit is perfect
Cut outs are exact
This actually feels like it could be part of the phone
Has a Matte White look
Not TPU, its a hard plastic
Lots of compliments just in one day
Cons (Keep in mind, these are things people may not like but doesn't bother me)
Phone is still a little slippery
Buttons are now a bit more flush with the case
Zero lip over the glass to put upside down
The cut outs are exact so accessories are about 1mm from being perfect
I'm going back for the other two colors. This is an awesome case. Does anyone else have any ultra thin cases they can recommend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Sent from my SM-G955U using Tapatalk
bigmase01 said:
I got this case.. very thin, very nice
https://www.bare-cases.com/products/bare-naked-for-galaxy-s8
Click to expand...
Click to collapse
Is there a promo code for that one? Kinda high in price.
got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug
I got the Anccer in gravel black:
https://www.amazon.com/gp/product/B06XTQKJY8/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Preserves "caseless" feel, super grippy.
Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v
I got this on Amazon:
Galaxy S8 Plus Case Clear Black https://www.amazon.com/dp/B06XGRDMZ9/ref=cm_sw_r_cp_apa_0VzizbX1VNFKY
Sent from my SM-G955U using Tapatalk
Nice, I'm going to order one.
Love that white & black combo.
sebastianraven said:
Is there a promo code for that one? Kinda high in price.
Click to expand...
Click to collapse
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk
bigmase01 said:
It is kinda high, no promo that I'm aware of. This is more of a harder case then tpu, that's what I like about it.. kinda snaps on
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
That's this one too. Same reason why I like it.
SandeepEmekar said:
Do not spend 10 USD for just re-branded case.
Buy the exact same one just for 4USD.
https://is.gd/6HMx4v
Click to expand...
Click to collapse
Good call.
Edit: Just went to the link. I just don't like AliExpress. I had problems with them in the past. 20-39 days for a case when I can get it in 2 days from Amazon, meh... I'll pay the difference.
pixel_junkie said:
got this today, it's going back. I have a skin on my phone, the case went on with ease on top of that and was still not snug
Click to expand...
Click to collapse
Really? That's a bummer. Mine fits perfect and has no movement. I don't have any sort of skin. I wonder if that's throwing off the fit.
felloffthetruck said:
Nice, I'm going to order one.
Love that white & black combo.
Click to expand...
Click to collapse
It looks just as good in person.
Needs a top and bottom lip. Put your phone face down and it will scratch.
bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Nope. User a screen protector.. Cases with lips exist. This is for absolute minimalists.
Just went to the mailbox to get the Elago case I ordered after seeing this thread. I'm coming from the Spigen Slim case and, even by comparison, the Elago is ridiculously thin! I love it, but it definitely needs to be paired with a screen protector in order to keep the phone somewhat safe.
It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
glitchhawk said:
It is probably not nearly as thin as that case, but I usually buy Ringke Fusion cases for every phone I get. I love the way it adds the extra tactile feel to the buttons, and has saved me from many drops even on asphalt and hard concrete. I'm not sure how it is on the S8+ yet as my S8+ is not here yet. but I've used Ringke Fusion cases on OP3T, Nexus 6P, Nexus 6, Xperia Z3, and I have loved it on every phone.
https://www.amazon.com/gp/product/B06XWRGLTR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Not even close.
Just a heads up. The Elago scratches and scuffs pretty easily. Not that I expected much from such an inexpensive case but, I've been babying my black Elago and, within 24 hours it already has 4 or 5 long scuff marks across the back. Not a big deal, just thought I'd mention. It would've been nice if they had used the same type of rubberized finish found on the Spigen and Ringke slim cases.
bonerp said:
Needs a top and bottom lip. Put your phone face down and it will scratch.
Click to expand...
Click to collapse
Who sets their phone with the screen down?
Hi guys have you found a best casing for our phone?
I think for now, Ringke Fusion X is the best case for Poco F3 see video here of the casing
Nillkin "Super Frosted Shield" and "Textured Nylon Case" are awesome!
Feels high quality and perfect fit.
~7€ from China (AliExpress Nillkin Oversea Store)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you guys know a case store where they ship from Europe?
I don't want to wait 30-50 days for a case to arrive
FYI: There's one more topic about cases already.
I got myself that one for 3$ (glass included in price , which is pretty ****ty fitted)
It's not bad, but very slippery and the design is not the best.
Yesterday I ordered a new NILLKIN CAMSHIELD for like 13$ and I hope it will be better. If not I can just send it back for free .
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.
osemoka said:
There's a known bug in f3 with screen not dimming on calls when you put it to the ear too fast. I don't think it's related to that case only. Or you mean it does not dimm at all and without it there are no problems. For sure I will check that.
Click to expand...
Click to collapse
Mine doesn't experience with that problem. Without using this particular case, the proximity sensor is fine. Even with the fabric case by nilkin, it's fine as well. However, when I'm using camshield, the proximity sensor is not working at all. So I was wondering about the location of the sensor. Tried adjusting my tempered glass didn't help too.
Thanks first!
I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad
+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.
Jinzuken said:
I tried those nilkin cases before but I settled with the Spigen cases. I am comfortable with their rugged cases, sadly still not available for our devices until now and according to their facebook/twitter official page, it will be available within a month (( maybe today up to may )). Still waiting for the release and currently using free case from poco sad
Click to expand...
Click to collapse
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nemix77 said:
+1 for Nillkin "Super Frosted Shield".
Provides protection without the bulk, if you want some extra protection you can get a HydroGel back protector also.
https://www.aliexpress.com/item/1005002352155328.html?spm=a2g0o.productlist.0.0.1620bdc0xtkOKR&algo_pvid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1&algo_expid=d49f5874-9dc5-43bc-8197-8d60ac0b25e1-0&btsid=0bb0624316191403231827827e5f0f&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The HydroGel protector is not too thick and Nillkin case should still fit right over it.
Click to expand...
Click to collapse
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
Spigen is good man. Thick, but comfortable to handle/carry it with your arm. Its thickness will satisfy and ensure you that your phone is protected when it falls or accidentally dropped on the ground.
osemoka said:
I even wrote to spiegen to make case for f3 few days ago and they told me they might ^^. So you say it's confirmed now . Spiegen is my No. 1 too.
Nillkin frosted is too stiff for me. It's not elastic at all. I bought one for my mum for moto gs5+ and it didn't even cover full phone on bottom. Hope that camshield I ordered is at least bit elastic. If not i gonna return it and wait for spiegen
Click to expand...
Click to collapse
It's elastic/rubberized but it's quite tight though. Plus, my proximity/ultrasonic sensor doesn't work well with the camshield. Fabric one by nillkin works fine though.
billy_overheat said:
Please try the camshield and let me know whether it blocks your proximity sensor or not. Once I use this case, the the screen won't dim when I'm on phone calls.
Click to expand...
Click to collapse
Yes. It fkn blocks it. I will send it back... And wait for spiegen.
Hi! What do you think about this Pitaka Case like? https://m.aliexpress.com/item/1005002402489617.html?trace=wwwdetail2mobilesitedetail
I ordered this one. It will probably come tomorrow.
https://a.aliexpress.com/_mPfw2pL
Since the phone itself is thin, I prefer the built in jelly case. But I ordered some cases from the local shop that looks like this:
Hello all nice to share thanks.... here are mine:
I have 2 of these, both are frosted rear with black or dark blue frames. Perfect fit including the fingerprint sensor and no issues blocking other areas. ¥11/€1.4/£1.23 each
Also have this all black and black with blue ring circle. The ring flips up to 180 degrees and rotates 360. Again, the fit is perfect though I don’t care for the writing but it’s not as obvious as in this picture. The centre is a so you could use it on a car mount but I sold my car so donknow how firm it is. ¥11.5/€1.5/£1.3 each
Lastly have this Nillken on order so need a couple of days till it arrives. ¥35/€4.5/£3.9 each
All three were purchased from Taobao, and you can search using the pictures to find numerous sellers. I’m in Hong Kong so there is a little more for transshipment postage but it’s very cheap.
I bought 2 sandstone cases, but I'm more for the aesthetics than for the protection.
https://es.aliexpress.com/item/4000061622675.html?spm=a2g0s.9042311.0.0.455863c0kHj4Bu
Just received the Nilkin Nature case. nice looking and better protection than the provided one.
https://www.aliexpress.com/item/1005002386841661.html?spm=a2g0s.9042311.0.0.225e6c37nEwch4
I have the transparent one.
I got the nillkin one sent with my device from poco. Really nice tight fit, feels secure. Ridges on the edges stand proud to protect the screen and the lens