Ok so here's how it all started:
My phone was randomly shutting off and rebooting on its own. At first, I thought it was overheating because the phone was very hot and when it cooled down, the problem was somewhat fixed.
Now, the phone randomly shuts off and reboots 90% of the time and I don't know why. It has a bootloop problem, but for some reason, I can occassional get my phone to load fully if I plug it in to charge, but it goes back into a bootloop after a few minutes or use. I tried a factory reset and it didn't work. In fact, it bricked my phone as it's now in a bootloop.
I tried a normal Flash using LG Flash Tool 2014 but for some reason it always crashes. First, it gives me a "Connection to server failed" error. But for some reason, the LG Tool keeps working as the status bar % goes up during the "upgrading phone" phase. However, when it reaches 99%, the LG Flash tool crashes. I tried both a normal Flash AND a CSE Flash. Both didn't fix the problem. It could be because the Flash Tool crashed, but nowhere on this forum does anyone talk about a fix to the "connection to server failed" error or the LG Tool crashing. Now after the initial flash, however, my phone does turn on and load up, but I get the same issue as before where the phone would crash/reboot after less than a minute of use. Then it bootloops after.
Am I the only one with this problem? If you have a solution, please let me know! My phone's useless at the moment. If I you can figure out why my flash tool crashes, that would be great too because if I can get the tool not to crash, it might flash properly.
Please and Thank you.
I have a LG G3 D855 International (Taiwan Version TW) running Lollipop 5.0
Have you tried the lg flash tool without the 2014 after it? I mean using the dll and tot files?
Usually if one does not work for me the other does. Just depends on how my phone decides to work lol
DudeThatsErin said:
Have you tried the lg flash tool without the 2014 after it? I mean using the dll and tot files?
Usually if one does not work for me the other does. Just depends on how my phone decides to work lol
Click to expand...
Click to collapse
Sadly, I can't use the TOT method because they don't have my version which is Taiwan TW D855.
darkelfx said:
Ok so here's how it all started:
My phone was randomly shutting off and rebooting on its own. At first, I thought it was overheating because the phone was very hot and when it cooled down, the problem was somewhat fixed.
Now, the phone randomly shuts off and reboots 90% of the time and I don't know why. It has a bootloop problem, but for some reason, I can occassional get my phone to load fully if I plug it in to charge, but it goes back into a bootloop after a few minutes or use. I tried a factory reset and it didn't work. In fact, it bricked my phone as it's now in a bootloop.
I tried a normal Flash using LG Flash Tool 2014 but for some reason it always crashes. First, it gives me a "Connection to server failed" error. But for some reason, the LG Tool keeps working as the status bar % goes up during the "upgrading phone" phase. However, when it reaches 99%, the LG Flash tool crashes. I tried both a normal Flash AND a CSE Flash. Both didn't fix the problem. It could be because the Flash Tool crashed, but nowhere on this forum does anyone talk about a fix to the "connection to server failed" error or the LG Tool crashing. Now after the initial flash, however, my phone does turn on and load up, but I get the same issue as before where the phone would crash/reboot after less than a minute of use. Then it bootloops after.
Am I the only one with this problem? If you have a solution, please let me know! My phone's useless at the moment. If I you can figure out why my flash tool crashes, that would be great too because if I can get the tool not to crash, it might flash properly.
Please and Thank you.
I have a LG G3 D855 International (Taiwan Version TW) running Lollipop 5.0
Click to expand...
Click to collapse
hi there. when you turn your phone on does the LG logo just coming in and out slowly? like blinking slowly? if yes, try to buy a new battery. i had that same problem. i cant even use my phone anymore because it just kept on shutting down. i can only use my phone when its plug into a wall charger. when i remove it to the wall charger it shuts down and the LG logo will start to come in and out as if blinking slowly. i tried factory reset a lot of time but didnt solve the problem. so i went to the LG service center and they just put in a new battery and it worked fine after..
darkelfx said:
Ok so here's how it all started:
My phone was randomly shutting off and rebooting on its own. At first, I thought it was overheating because the phone was very hot and when it cooled down, the problem was somewhat fixed.
Now, the phone randomly shuts off and reboots 90% of the time and I don't know why. It has a bootloop problem, but for some reason, I can occassional get my phone to load fully if I plug it in to charge, but it goes back into a bootloop after a few minutes or use. I tried a factory reset and it didn't work. In fact, it bricked my phone as it's now in a bootloop.
I tried a normal Flash using LG Flash Tool 2014 but for some reason it always crashes. First, it gives me a "Connection to server failed" error. But for some reason, the LG Tool keeps working as the status bar % goes up during the "upgrading phone" phase. However, when it reaches 99%, the LG Flash tool crashes. I tried both a normal Flash AND a CSE Flash. Both didn't fix the problem. It could be because the Flash Tool crashed, but nowhere on this forum does anyone talk about a fix to the "connection to server failed" error or the LG Tool crashing. Now after the initial flash, however, my phone does turn on and load up, but I get the same issue as before where the phone would crash/reboot after less than a minute of use. Then it bootloops after.
Am I the only one with this problem? If you have a solution, please let me know! My phone's useless at the moment. If I you can figure out why my flash tool crashes, that would be great too because if I can get the tool not to crash, it might flash properly.
Please and Thank you.
I have a LG G3 D855 International (Taiwan Version TW) running Lollipop 5.0
Click to expand...
Click to collapse
I have a G3 D855 taiwan versiĆ³n, too.
download the latest kdz and flash it. who knows the one you are trying to flash is corrupted.
ignore this message "connection to server failed" .
try to use different usb ports and get a new battery just in case.
Hi...i have the same problem.
Did you find any solutions.
Thanks in advance
darkelfx said:
Ok so here's how it all started:
My phone was randomly shutting off and rebooting on its own. At first, I thought it was overheating because the phone was very hot and when it cooled down, the problem was somewhat fixed.
Now, the phone randomly shuts off and reboots 90% of the time and I don't know why. It has a bootloop problem, but for some reason, I can occassional get my phone to load fully if I plug it in to charge, but it goes back into a bootloop after a few minutes or use. I tried a factory reset and it didn't work. In fact, it bricked my phone as it's now in a bootloop.
I tried a normal Flash using LG Flash Tool 2014 but for some reason it always crashes. First, it gives me a "Connection to server failed" error. But for some reason, the LG Tool keeps working as the status bar % goes up during the "upgrading phone" phase. However, when it reaches 99%, the LG Flash tool crashes. I tried both a normal Flash AND a CSE Flash. Both didn't fix the problem. It could be because the Flash Tool crashed, but nowhere on this forum does anyone talk about a fix to the "connection to server failed" error or the LG Tool crashing. Now after the initial flash, however, my phone does turn on and load up, but I get the same issue as before where the phone would crash/reboot after less than a minute of use. Then it bootloops after.
Am I the only one with this problem? If you have a solution, please let me know! My phone's useless at the moment. If I you can figure out why my flash tool crashes, that would be great too because if I can get the tool not to crash, it might flash properly.
Please and Thank you.
I have a LG G3 D855 International (Taiwan Version TW) running Lollipop 5.0
Click to expand...
Click to collapse
Try using a spare battery if you have one, might fix the problem?
Thanks It did solve the problem.
casfaar said:
Try using a spare battery if you have one, fight fix the problem?
Click to expand...
Click to collapse
Great!
natalwala said:
Thanks It did solve the problem.
Click to expand...
Click to collapse
Thats great! Same thing is happening to me, my new battery is on the way. Hopefully it will work
Same symptoms here - started as random reboots under heavy load or using the camera, so tried reflashing from v21a LL KDZ.
Then bootlooping just after the LG logo, occasionally getting as far as fully booted, but then restarting near immediately.
Doesn't happen when connected to power.
Tried a different battery, and no problems.
Tried my battery in another G3 - identical behaviour there.
Note: also happens on Marshmallow.
Solution: New battery!
Thanks to posters above.
darkelfx said:
Ok so here's how it all started:
My phone was randomly shutting off and rebooting on its own. At first, I thought it was overheating because the phone was very hot and when it cooled down, the problem was somewhat fixed.
Now, the phone randomly shuts off and reboots 90% of the time and I don't know why. It has a bootloop problem, but for some reason, I can occassional get my phone to load fully if I plug it in to charge, but it goes back into a bootloop after a few minutes or use. I tried a factory reset and it didn't work. In fact, it bricked my phone as it's now in a bootloop.
I tried a normal Flash using LG Flash Tool 2014 but for some reason it always crashes. First, it gives me a "Connection to server failed" error. But for some reason, the LG Tool keeps working as the status bar % goes up during the "upgrading phone" phase. However, when it reaches 99%, the LG Flash tool crashes. I tried both a normal Flash AND a CSE Flash. Both didn't fix the problem. It could be because the Flash Tool crashed, but nowhere on this forum does anyone talk about a fix to the "connection to server failed" error or the LG Tool crashing. Now after the initial flash, however, my phone does turn on and load up, but I get the same issue as before where the phone would crash/reboot after less than a minute of use. Then it bootloops after.
Am I the only one with this problem? If you have a solution, please let me know! My phone's useless at the moment. If I you can figure out why my flash tool crashes, that would be great too because if I can get the tool not to crash, it might flash properly.
Please and Thank you.
I have a LG G3 D855 International (Taiwan Version TW) running Lollipop 5.0
Click to expand...
Click to collapse
You can try....
http://forum.xda-developers.com/lg-g3/help/okay-lollipop-flash-kdz-android-mm-fix-t3283666
you can try rom TOT, you can change ver 10a, or 10b.... then...(if flash success in 10x TOT), kdz again into 20x
Hey, my Lg G4 H815 is dead. It got a bootloop at the logo. I only one got it to the startscreen but it died again.
I tried every thread offered I found. I ended up with going into download mode and install back to stock. This didnt work with lg flashtool so I tried the method with lgup. Nothings changed. What now happens is that when trying to get into download mode, it says some seconds donload mode and swithes back to the logo. Since then I dont even get into hard reset mode.... So can I through it into my trash can? Or does anyone know how to fix this? I would be thankful for every answer.... have a nice weekend you all
as long as the phone is for your region LG should repair/replace it. I just had the same issue with my H811 and despite it being 1 year and 2 months old they repaired it free of charge.
I've had my G4 for about 11 months and one day while watching a video froze and got stuck on the LG logo. It's got no warranty and I have tried flashing de kdz using LGUP. Also tried LG Bridge which didn't work. Both times when I flashed the rom the process would reach 100% and then reboot the phone, after that It would go back to being stuck on the logo.
I don't know what else to try, or if it's definitely dead?
it seems to be the boot loop hardware problem.
try this...
http://forum.xda-developers.com/showpost.php?p=65919400&postcount=707
ricardollreis said:
it seems to be the boot loop hardware problem.
try this...
http://forum.xda-developers.com/showpost.php?p=65919400&postcount=707
Click to expand...
Click to collapse
I was literally looking a for new phone on the internet when I decided to see if someone had replied to my post. Man, this worked!!!! Thank you so much!
Hello, I would like to ask if my LG G3 is softbricked or hardbricked. It has been a long while since it decided to boot loop. I tried to fix it but got no results. I tried to factory reset it, but the next day it didn't turn on anymore and got stuck in the logo. Note : the phone was experiencing some heating issue before it decided to screw itself up. I tried numerous troubleshooting from the net, none worked. I also did try to reinstall the firmware to stock again, it did boot but it can't get to the home screen. I then factory reset it again and tried using another firmware also built for my phone (it's LG G3 D855). It failed again at 33% while it was in the firmware update mode. Now that I have left it for a solid year, I thought that it would be nice to try again. Which I did, but it couldn't charge anymore and it cannot boot to the logo. I tried to go to the download mode but no response. I tried connecting it to my computer, but it only detects my phone as a charge only device, it also detects it on only several random occasion. I hope this is a softbrick and it can be fixed at home so I don't need to go to the store to repair it.
I'm sorry for the long explanation, I had been trying to revive it for months now and had no luck. How do I fix this, at least how do I get to the firmware update download mode again? I really really hope that anyone can help. Thankyou so much in advance.
Use my guide in this thread
https://forum.xda-developers.com/lg...w-d855-30b-t3286268/post72875603#post72875603