Hi, I really like the OxygenOS function "power off alarm" [inside the native clock app], that enables the alarm to power on the phone to ring; you could use other options, like "power on / off schedule" to get the same results (powering on the phone to ring the alarm, 1 or 2 minutes earlier).
Does CM14.1 have this functions, or one of them at least?
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
tasar said:
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
Oh, there isn't this option on CM14.1. Good to know, so I will not flahs it and will stick to OxygenOS Community Builds.
Thank you!
I also love the shake to snooze on cm! it's should be standard on all alarms
Related
Hello, is any of you experiencing where the point of the s pen not reaching the top of the screen. The touchscreen still works but whenever I will use my s pen it won't let me, so I can't reach the notification bar using the s pen (due to the fact that I can't reach that part using my s pen).
Note: I am not using any magnetic case, only screen protector but If I remember it right, it was working not until now.
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
aritrea said:
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
Click to expand...
Click to collapse
Hello, thanks for your response. However, I still haven't rooted my tab because I want to keep the warranty intact that is why I can't download the app you have stated.
I really don't have any idea about why my tab have this kind of problem. It really bothers me since the service center is so far away from our home.
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Working:
Everything (including hardware composer)
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
https://nameless-rom.org/
https://plus.google.com/communities/111682533298374492637
https://jira.nameless-rom.org/
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
Rom:
http://sourceforge.net/projects/namelessrom/files/n-2.0/t0lte/
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
Click to expand...
Click to collapse
Thanks :good:
current version
installation very fast
first boot little longer than usual
then its butter smooth
everything working
GPS is my pet peeve and its working just fine, no delays at all.
I approve this ROM for every day use.
Installed....so far good.. WiFi good.. Data defaulting to metropcs APN.. Had to change to T-Mobile manually.
Update: when in YouTube ..received call..pressed answer and screen goes blank. Call got connected..but can't set on speaker or hangup, as screen doesn't take inputs
GPS works. Netflix still a no go like on the other 5.0 CM based Roms and for some reason I'm not getting audio from headphones.
You can try this rom for working sensors
https://mega.co.nz/#!FAsTmQaS!oOA6rQa7zr6KUejPyfZkHJrqzh-gU7xlWj8X-d8CuW8
GPS is broken though
Gesendet von meinem GT-N7105 mit Tapatalk
Nice!
Sent from my GT-N7105 using XDA Free mobile app
speaker still plays when headphone is plugged in.
Hi I have the problem that every time when I call someone the screen turns of.. I can get it on by pressing power but as soon as I select the ongoing phone call the screen turns black again.. It is impossible to use the Dailerr during a call so I can not call any service where i need to make a selection with the Dailer.. Anyone have a solution?
AngryDinosaur said:
speaker still plays when headphone is plugged in.
Click to expand...
Click to collapse
Could you please try the cm12 rom available in this forum (or my cm12 build from n7105 section). They're using the older cm kernel. If it works there, I'll probably find a fix quickly.
reist said:
Hi I have the problem that every time when I call someone the screen turns of.. I can get it on by pressing power but as soon as I select the ongoing phone call the screen turns black again.. It is impossible to use the Dailerr during a call so I can not call any service where i need to make a selection with the Dailer.. Anyone have a solution?
Click to expand...
Click to collapse
Try my rom three posts above yours.
Gesendet von meinem GT-N7105 mit Tapatalk
hello and thanks! Can I treat your rom as an update so I don't have to format everything but just flash this one like an update?
Yes
Gesendet von meinem GT-N7105 mit Tapatalk
DerTeufel1980 said:
Yes
Gesendet von meinem GT-N7105 mit Tapatalk
Click to expand...
Click to collapse
It worked thanks!!
Zum woll!
reist said:
It worked thanks!!
Zum woll!
Click to expand...
Click to collapse
Gps is working like a charm to by the way!
reist said:
Gps is working like a charm to by the way!
Click to expand...
Click to collapse
With the rom above? Or the one from the op?
Gesendet von meinem GT-N7105 mit Tapatalk
The one you suggested in the mega link
Alright @DerTeufel1980 i tried this http://forum.xda-developers.com/note-2-tmobile/development/rom-team-ub-rom-t0lte-t2974731 . No headphone and speaker playing at the same time issue.
AngryDinosaur said:
Alright @DerTeufel1980 i tried this http://forum.xda-developers.com/note-2-tmobile/development/rom-team-ub-rom-t0lte-t2974731 . No headphone and speaker playing at the same time issue.
Click to expand...
Click to collapse
Just do be sure.... It has the same problem?
Gesendet von meinem GT-N7105 mit Tapatalk
uploaded new build. sensors and gps working now
DerTeufel1980 said:
Just do be sure.... It has the same problem?
Gesendet von meinem GT-N7105 mit Tapatalk
Click to expand...
Click to collapse
It does not have the same problem.
updated first post with official download mirror
Hi all,
I'm new member of this forum and i would like thanks all the users and developpers for your works and your answers.
Thank you very much to skeleton1911 for the rom eragon.
I post my question here because i have not the possibility in the developement section.
I would like know if the cover case time work on this rom ? (only because i will receive one the next week).
Have a nice day (and sorry for my bad english)
Yes it does work.
Thank you very much.
Mabool said:
Hi all,
I'm new member of this forum and i would like thanks all the users and developpers for your works and your answers.
Thank you very much to skeleton1911 for the rom eragon.
I post my question here because i have not the possibility in the developement section.
I would like know if the cover case time work on this rom ? (only because i will receive one the next week).
Have a nice day (and sorry for my bad english)
Click to expand...
Click to collapse
Do you mean the nice analogue clock display? I found it didn't work with v1(I think) but is ok on v2 - I think v2.5 wasn't working either for some reason though that may just have been me?! I am waiting for v3 to try again
@charliepie
Thank you , I hope the clock display function sue v3 . I trust that
@skeleton1911
I would like thank you very much for your great work and your time spent in developing this rom (can post on the development section I hope that the message arrives to you ) .
Mabool said:
@charliepie
Thank you , I hope the clock display function sue v3 . I trust that
@skeleton1911
I thank you very much for your great work and your time spent in developing this rom (can post on the development section I hope that the message arrives to you ) .
Click to expand...
Click to collapse
Cheers.
The cover clock will work in v3 (soon) again
Gesendet von meinem Elephone P8000 mit Tapatalk
@skeleton1911
Thank you your are the best
I have a small question, is it possible to incorporate Prof Reminder in the Rom, to help the P8000 pocesseurs without notification LED (i can't post the link from elephone because i have not 10 post in xda :crying: ) or another similar program , it would be great practice. Thanks in advance.
Mabool said:
@skeleton1911
Thank you your are the best
I have a small question, is it possible to incorporate Prof Reminder in the Rom, to help the P8000 pocesseurs without notification LED (i can't post the link from elephone because i have not 10 post in xda :crying: ) or another similar program , it would be great practice. Thanks in advance.
Click to expand...
Click to collapse
Send me a pm with the link. i will look at it
Gesendet von meinem Elephone P8000 mit Tapatalk
About the clock display is that done via proximity sensors or by a magnet A I've bought a case and there Is no standby clock only if I use the original case. If my galaxy s4 has sview with any case it has, it must be proximity sensor like the one that turns the phone off. My question can the p8000 use the proximity sensor to go into its standby clock
Sent from my Elephone P8000 using XDA Premium 4 mobile app
i whould like to know why my phone shuts off when i lock it, using eragon 2.5!
Peinne said:
i whould like to know why my phone shuts off when i lock it, using eragon 2.5!
Click to expand...
Click to collapse
You have the stock base boot bug . you can solve it by flashing 20150725 stock base
Or flash eragon v1. (It based on it)
Gesendet von meinem Elephone P8000 mit Tapatalk
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
This THREAD is not official Q/A thread for eragon ROM.
All question /request/ bugs etc.. Can be post into the eragon ROM thread!
Gesendet von meinem Elephone P8000 mit Tapatalk
@skeleton1911
Hi , thank you very much for your rom v3 , it is great.
I have just a little weird , occasionally my screen flashes red all around (of 4-5 pixels). Would you have an idea of where it may come ?
I post here because i can't in the official thread of eragon sorry. (3 post and that will be good )
Have a nice day.
Mabool said:
@skeleton1911
Hi , thank you very much for your rom v3 , it is great.
I have just a little weird , occasionally my screen flashes red all around (of 4-5 pixels). Would you have an idea of where it may come ?
I post here because i can't in the official thread of eragon sorry. (3 post and that will be good )
Have a nice day.
Click to expand...
Click to collapse
? I have no idea . maybe your phone is damaged.
Look into settings/developer settings there is under drawer an option "show surface update" enable it and disable it. Maybe it helps.
skeleton1911 said:
? I have no idea . maybe your phone is damaged.
Look into settings/developer settings there is under drawer an option "show surface update" enable it and disable it. Maybe it helps.
Click to expand...
Click to collapse
It's disable, and i'm not sure that is a hard default, i will test to go back on the stock rom for view it's the same.
I tell you when i make the test.
@skeleton1911
Ok i come back to say you all is ok, when i'm in stock rom no probleme, clean reinstall of eragon v3 and all is good, the bug is not come back.
Thx very much for your help.
Hi Skeleton ,
first BIG THX for your great ROM !! :good::good::good:
i already post it but perhaps u have an idea ,for Bluetooth Music bug its still in the 907 and also 909 i think.
Hi weisst du was man da machen kann ?, ich mein meine alten phones geben musik über bluetooth problemlos wieder aber mit dem ele hakt die musik und wierd zu schnell wiedergegeben .. total nervig ..
vielleicht hast ja ne idee.
gruß
Gunnar
gungott said:
Hi Skeleton ,
first BIG THX for your great ROM !! :good::good::good:
i already post it but perhaps u have an idea ,for Bluetooth Music bug its still in the 907 and also 909 i think.
Hi weisst du was man da machen kann ?, ich mein meine alten phones geben musik über bluetooth problemlos wieder aber mit dem ele hakt die musik und wierd zu schnell wiedergegeben .. total nervig ..
vielleicht hast ja ne idee.
gruß
Gunnar
Click to expand...
Click to collapse
For me BT musik etc is fine. But I can send you a flashable zip with a fix (maybe) for it asap.
At the moment I prepare for my work (nightshift) I will be back tomorrow.
Gesendet von meinem Elephone P8000 mit Tapatalk
skeleton1911 said:
For me BT musik etc is fine. But I can send you a flashable zip with a fix (maybe) for it asap.
At the moment I prepare for my work (nightshift) I will be back tomorrow.
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
that would be very nice ...
danke schonmal !!
You saved my elephone!
@skeleton1911
I just want to thank you after my new phone broke with the last OTA and I tried your ROM and now it works again - even better than before.
I never flashed ROMS before and it wasn't easy for a beginner but after 1 week of no phone I can now use it again so...
Thanks! :laugh:
gungott said:
that would be very nice ...
danke schonmal !!
Click to expand...
Click to collapse
Will do after the weekend
djnield said:
@skeleton1911
I just want to thank you after my new phone broke with the last OTA and I tried your ROM and now it works again - even better than before.
I never flashed ROMS before and it wasn't easy for a beginner but after 1 week of no phone I can now use it again so...
Thanks! [emoji23]
Click to expand...
Click to collapse
Thank you
Gesendet von meinem Elephone P8000 mit Tapatalk
Hi, I'm wondering if anyone has figured out how to alter what is shown in case window. It shows unread text messages but I really only use what's app so would prefer to see that. Thanks, Hebs.
When i open cover, it shows me always telephone, not homescreen. How can i change that?
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
i just received mine today and i found the same problem.
Is there a way to config it?
Gesendet von meinem Nexus 5 mit Tapatalk
I think you need to try either factory reset or Eragon ROM v4 just released today.
akomatik said:
i just received mine today and i found the same problem.
Click to expand...
Click to collapse
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
Try installing the eragon rom, this fixed the light sensor issue for me.
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
I never had this problem, which ROM version are you running?
I switched to Eragon ROM caused by some bugs in the Stock ROM.
There is a short page with Infos for P8000 Users in german managed by jegi0605:
handy-anleitungen(dot)de
Yes, i know, but there is no solution. I think, i Must reset it.
Gesendet von meinem Nexus 5 mit Tapatalk
mongo1010 said:
Yes, i know, but there is no solution. I think, i Must reset it.
Click to expand...
Click to collapse
Perhaps you can try a different launcher first?
Good Idea. Use Nova. Try another...
Gesendet von meinem Nexus 5 mit Tapatalk
no changes
https://www.dropbox.com/s/ok8datom09eq8af/2015-10-19%2019.41.27.jpg?dl=0
My current clock is as shown. I have tried jegi0605's app and the clocks look great......but I would really like to keep my digital clock and change the notification aspects. The missed calls icon/feature is useful but I rarely use messenger so I would like to change that icon/feature to WhatsApp unread messages count - or perhaps integrate the icons into jegi0605's clock?
Hello
Is there a way to force the installation of the new google ambient mode or is there an aok to download?
Many thanks for your answer
Gesendet von meinem SM-G965F mit Tapatalk
Im on the new Beta and dont have ambient mode. An apk will prob pop up soon as its trickling down to devices slowly - https://www.xda-developers.com/google-assistant-ambient-mode-rolling-out/.