Related
Hello, is any of you experiencing where the point of the s pen not reaching the top of the screen. The touchscreen still works but whenever I will use my s pen it won't let me, so I can't reach the notification bar using the s pen (due to the fact that I can't reach that part using my s pen).
Note: I am not using any magnetic case, only screen protector but If I remember it right, it was working not until now.
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
aritrea said:
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
Click to expand...
Click to collapse
Hello, thanks for your response. However, I still haven't rooted my tab because I want to keep the warranty intact that is why I can't download the app you have stated.
I really don't have any idea about why my tab have this kind of problem. It really bothers me since the service center is so far away from our home.
Hi all,
I'm new member of this forum and i would like thanks all the users and developpers for your works and your answers.
Thank you very much to skeleton1911 for the rom eragon.
I post my question here because i have not the possibility in the developement section.
I would like know if the cover case time work on this rom ? (only because i will receive one the next week).
Have a nice day (and sorry for my bad english)
Yes it does work.
Thank you very much.
Mabool said:
Hi all,
I'm new member of this forum and i would like thanks all the users and developpers for your works and your answers.
Thank you very much to skeleton1911 for the rom eragon.
I post my question here because i have not the possibility in the developement section.
I would like know if the cover case time work on this rom ? (only because i will receive one the next week).
Have a nice day (and sorry for my bad english)
Click to expand...
Click to collapse
Do you mean the nice analogue clock display? I found it didn't work with v1(I think) but is ok on v2 - I think v2.5 wasn't working either for some reason though that may just have been me?! I am waiting for v3 to try again
@charliepie
Thank you , I hope the clock display function sue v3 . I trust that
@skeleton1911
I would like thank you very much for your great work and your time spent in developing this rom (can post on the development section I hope that the message arrives to you ) .
Mabool said:
@charliepie
Thank you , I hope the clock display function sue v3 . I trust that
@skeleton1911
I thank you very much for your great work and your time spent in developing this rom (can post on the development section I hope that the message arrives to you ) .
Click to expand...
Click to collapse
Cheers.
The cover clock will work in v3 (soon) again
Gesendet von meinem Elephone P8000 mit Tapatalk
@skeleton1911
Thank you your are the best
I have a small question, is it possible to incorporate Prof Reminder in the Rom, to help the P8000 pocesseurs without notification LED (i can't post the link from elephone because i have not 10 post in xda :crying: ) or another similar program , it would be great practice. Thanks in advance.
Mabool said:
@skeleton1911
Thank you your are the best
I have a small question, is it possible to incorporate Prof Reminder in the Rom, to help the P8000 pocesseurs without notification LED (i can't post the link from elephone because i have not 10 post in xda :crying: ) or another similar program , it would be great practice. Thanks in advance.
Click to expand...
Click to collapse
Send me a pm with the link. i will look at it
Gesendet von meinem Elephone P8000 mit Tapatalk
About the clock display is that done via proximity sensors or by a magnet A I've bought a case and there Is no standby clock only if I use the original case. If my galaxy s4 has sview with any case it has, it must be proximity sensor like the one that turns the phone off. My question can the p8000 use the proximity sensor to go into its standby clock
Sent from my Elephone P8000 using XDA Premium 4 mobile app
i whould like to know why my phone shuts off when i lock it, using eragon 2.5!
Peinne said:
i whould like to know why my phone shuts off when i lock it, using eragon 2.5!
Click to expand...
Click to collapse
You have the stock base boot bug . you can solve it by flashing 20150725 stock base
Or flash eragon v1. (It based on it)
Gesendet von meinem Elephone P8000 mit Tapatalk
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
This THREAD is not official Q/A thread for eragon ROM.
All question /request/ bugs etc.. Can be post into the eragon ROM thread!
Gesendet von meinem Elephone P8000 mit Tapatalk
@skeleton1911
Hi , thank you very much for your rom v3 , it is great.
I have just a little weird , occasionally my screen flashes red all around (of 4-5 pixels). Would you have an idea of where it may come ?
I post here because i can't in the official thread of eragon sorry. (3 post and that will be good )
Have a nice day.
Mabool said:
@skeleton1911
Hi , thank you very much for your rom v3 , it is great.
I have just a little weird , occasionally my screen flashes red all around (of 4-5 pixels). Would you have an idea of where it may come ?
I post here because i can't in the official thread of eragon sorry. (3 post and that will be good )
Have a nice day.
Click to expand...
Click to collapse
? I have no idea . maybe your phone is damaged.
Look into settings/developer settings there is under drawer an option "show surface update" enable it and disable it. Maybe it helps.
skeleton1911 said:
? I have no idea . maybe your phone is damaged.
Look into settings/developer settings there is under drawer an option "show surface update" enable it and disable it. Maybe it helps.
Click to expand...
Click to collapse
It's disable, and i'm not sure that is a hard default, i will test to go back on the stock rom for view it's the same.
I tell you when i make the test.
@skeleton1911
Ok i come back to say you all is ok, when i'm in stock rom no probleme, clean reinstall of eragon v3 and all is good, the bug is not come back.
Thx very much for your help.
Hi Skeleton ,
first BIG THX for your great ROM !! :good::good::good:
i already post it but perhaps u have an idea ,for Bluetooth Music bug its still in the 907 and also 909 i think.
Hi weisst du was man da machen kann ?, ich mein meine alten phones geben musik über bluetooth problemlos wieder aber mit dem ele hakt die musik und wierd zu schnell wiedergegeben .. total nervig ..
vielleicht hast ja ne idee.
gruß
Gunnar
gungott said:
Hi Skeleton ,
first BIG THX for your great ROM !! :good::good::good:
i already post it but perhaps u have an idea ,for Bluetooth Music bug its still in the 907 and also 909 i think.
Hi weisst du was man da machen kann ?, ich mein meine alten phones geben musik über bluetooth problemlos wieder aber mit dem ele hakt die musik und wierd zu schnell wiedergegeben .. total nervig ..
vielleicht hast ja ne idee.
gruß
Gunnar
Click to expand...
Click to collapse
For me BT musik etc is fine. But I can send you a flashable zip with a fix (maybe) for it asap.
At the moment I prepare for my work (nightshift) I will be back tomorrow.
Gesendet von meinem Elephone P8000 mit Tapatalk
skeleton1911 said:
For me BT musik etc is fine. But I can send you a flashable zip with a fix (maybe) for it asap.
At the moment I prepare for my work (nightshift) I will be back tomorrow.
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
that would be very nice ...
danke schonmal !!
You saved my elephone!
@skeleton1911
I just want to thank you after my new phone broke with the last OTA and I tried your ROM and now it works again - even better than before.
I never flashed ROMS before and it wasn't easy for a beginner but after 1 week of no phone I can now use it again so...
Thanks! :laugh:
gungott said:
that would be very nice ...
danke schonmal !!
Click to expand...
Click to collapse
Will do after the weekend
djnield said:
@skeleton1911
I just want to thank you after my new phone broke with the last OTA and I tried your ROM and now it works again - even better than before.
I never flashed ROMS before and it wasn't easy for a beginner but after 1 week of no phone I can now use it again so...
Thanks! [emoji23]
Click to expand...
Click to collapse
Thank you
Gesendet von meinem Elephone P8000 mit Tapatalk
Hi, I'm wondering if anyone has figured out how to alter what is shown in case window. It shows unread text messages but I really only use what's app so would prefer to see that. Thanks, Hebs.
When i open cover, it shows me always telephone, not homescreen. How can i change that?
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
i just received mine today and i found the same problem.
Is there a way to config it?
Gesendet von meinem Nexus 5 mit Tapatalk
I think you need to try either factory reset or Eragon ROM v4 just released today.
akomatik said:
i just received mine today and i found the same problem.
Click to expand...
Click to collapse
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
Try installing the eragon rom, this fixed the light sensor issue for me.
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
I never had this problem, which ROM version are you running?
I switched to Eragon ROM caused by some bugs in the Stock ROM.
There is a short page with Infos for P8000 Users in german managed by jegi0605:
handy-anleitungen(dot)de
Yes, i know, but there is no solution. I think, i Must reset it.
Gesendet von meinem Nexus 5 mit Tapatalk
mongo1010 said:
Yes, i know, but there is no solution. I think, i Must reset it.
Click to expand...
Click to collapse
Perhaps you can try a different launcher first?
Good Idea. Use Nova. Try another...
Gesendet von meinem Nexus 5 mit Tapatalk
no changes
https://www.dropbox.com/s/ok8datom09eq8af/2015-10-19%2019.41.27.jpg?dl=0
My current clock is as shown. I have tried jegi0605's app and the clocks look great......but I would really like to keep my digital clock and change the notification aspects. The missed calls icon/feature is useful but I rarely use messenger so I would like to change that icon/feature to WhatsApp unread messages count - or perhaps integrate the icons into jegi0605's clock?
Hi, I really like the OxygenOS function "power off alarm" [inside the native clock app], that enables the alarm to power on the phone to ring; you could use other options, like "power on / off schedule" to get the same results (powering on the phone to ring the alarm, 1 or 2 minutes earlier).
Does CM14.1 have this functions, or one of them at least?
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
tasar said:
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
Oh, there isn't this option on CM14.1. Good to know, so I will not flahs it and will stick to OxygenOS Community Builds.
Thank you!
I also love the shake to snooze on cm! it's should be standard on all alarms
Hey guys,
Is there any way to enable Dark Mode (theme) in Android 7? Google removed it, i know - but i cant imagine that you cant force this .. substratum is way too Buggy & need dark theme
Thanks
Gesendet von meinem HTC 10 mit Tapatalk
AFAIK official HTC Nougat ROM has night mode enabled.
ademmer said:
AFAIK official HTC Nougat ROM has night mode enabled.
Click to expand...
Click to collapse
night mode and dark mode are to different things
ademmer said:
AFAIK official HTC Nougat ROM has night mode enabled.
Click to expand...
Click to collapse
They are two different things.
One thing is the dark theme where the menus and others are black.
What you mention is the night mode that simply puts the warm color screen (yellow) to relax the vision