Hello, is any of you experiencing where the point of the s pen not reaching the top of the screen. The touchscreen still works but whenever I will use my s pen it won't let me, so I can't reach the notification bar using the s pen (due to the fact that I can't reach that part using my s pen).
Note: I am not using any magnetic case, only screen protector but If I remember it right, it was working not until now.
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
aritrea said:
Have you installed gmd spen control? If yes, does it still fall if you disable the service completely (not pause mode)?
Gesendet von meinem GT-N5100 mit Tapatalk 2
Click to expand...
Click to collapse
Hello, thanks for your response. However, I still haven't rooted my tab because I want to keep the warranty intact that is why I can't download the app you have stated.
I really don't have any idea about why my tab have this kind of problem. It really bothers me since the service center is so far away from our home.
Related
Hi, anyone know a pedometer app that allow to set "start" and "finish" to count steps? the default fit count steps without possibilities to start,stop or reset the count
Google Fit? Sony Life log?
Gesendet von meinem Nexus 7 mit Tapatalk
andyrtr said:
Google Fit? Sony Life log?
Gesendet von meinem Nexus 7 mit Tapatalk
Click to expand...
Click to collapse
Lifelog doesn't work with smartwatch 3 and google fit doesn't allow to start session, but counts all steps
Is there really internal pedometer in SW3 or not???
Because when I do some steps without mobile phone, there is no change in counting! I have to go with my phone a then I can see increasing number of steps online.
Jerry7650 said:
Is there really internal pedometer in SW3 or not???
Because when I do some steps without mobile phone, there is no change in counting! I have to go with my phone a then I can see increasing number of steps online.
Click to expand...
Click to collapse
Yes, there is. I am not hooked up to my phone when I go jogging and it is counting my steps...
fer2503 said:
Lifelog doesn't work with smartwatch 3 and google fit doesn't allow to start session, but counts all steps
Click to expand...
Click to collapse
Lifelog works with Smartwatch 3 now.
And both work counting steps with just the watch. Tested today.
However, doesn't seem to be a way to set "sessions" for the pedometer.
I've been thinking of something like this as a part of a watch face service. I'm still unsure if it makes sense at all, and how it would affect the battery life, but should be possible. Or maybe you mean a standalone app only?
There are already watch faces at facerepo.com with the stepcounter included. But they all show the total amount of all time steps. There's a bug with our watch not showing daily steps. For sessions you will require a standalone app. No idea if such thing is already out.
andyrtr said:
There are already watch faces at facerepo.com with the stepcounter included. But they all show the total amount of all time steps. There's a bug with our watch not showing daily steps. For sessions you will require a standalone app. No idea if such thing is already out.
Click to expand...
Click to collapse
if you want "daily step" on watch face, you can shutdown your watch every night before you going to sleep and turn it on while you wake in the morning, step count will be resetting to zero.
Up by jawbone is the most accurate :good:
senso36 said:
Up by jawbone is the most accurate :good:
Click to expand...
Click to collapse
I totally agree. I disabled Google Fit and am using only Up by Jawbone for counting steps. I can say it's great. Together with Sleep as Android and Ghostrider it makes the SW3 a great and complete activity tracker.
Can UP app track sleep time through s3?
finitol said:
Can UP app track sleep time through s3?
Click to expand...
Click to collapse
No, it doesn't. I use Sleep as Android to track my sleep, but I must say I would be interested in trying the UP app tracking if they make it available through an update.
Inviato dal mio SM-T325 utilizzando Tapatalk
Hi, I'm wondering if anyone has figured out how to alter what is shown in case window. It shows unread text messages but I really only use what's app so would prefer to see that. Thanks, Hebs.
When i open cover, it shows me always telephone, not homescreen. How can i change that?
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
i just received mine today and i found the same problem.
Is there a way to config it?
Gesendet von meinem Nexus 5 mit Tapatalk
I think you need to try either factory reset or Eragon ROM v4 just released today.
akomatik said:
i just received mine today and i found the same problem.
Click to expand...
Click to collapse
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
Try installing the eragon rom, this fixed the light sensor issue for me.
mongo1010 said:
When i open cover, it shows me always telephone, not homescreen. How can i change that?
Click to expand...
Click to collapse
I never had this problem, which ROM version are you running?
I switched to Eragon ROM caused by some bugs in the Stock ROM.
There is a short page with Infos for P8000 Users in german managed by jegi0605:
handy-anleitungen(dot)de
Yes, i know, but there is no solution. I think, i Must reset it.
Gesendet von meinem Nexus 5 mit Tapatalk
mongo1010 said:
Yes, i know, but there is no solution. I think, i Must reset it.
Click to expand...
Click to collapse
Perhaps you can try a different launcher first?
Good Idea. Use Nova. Try another...
Gesendet von meinem Nexus 5 mit Tapatalk
no changes
https://www.dropbox.com/s/ok8datom09eq8af/2015-10-19%2019.41.27.jpg?dl=0
My current clock is as shown. I have tried jegi0605's app and the clocks look great......but I would really like to keep my digital clock and change the notification aspects. The missed calls icon/feature is useful but I rarely use messenger so I would like to change that icon/feature to WhatsApp unread messages count - or perhaps integrate the icons into jegi0605's clock?
Hi, I really like the OxygenOS function "power off alarm" [inside the native clock app], that enables the alarm to power on the phone to ring; you could use other options, like "power on / off schedule" to get the same results (powering on the phone to ring the alarm, 1 or 2 minutes earlier).
Does CM14.1 have this functions, or one of them at least?
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
tasar said:
I like this too and miss it in cm13 and cm14.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
Oh, there isn't this option on CM14.1. Good to know, so I will not flahs it and will stick to OxygenOS Community Builds.
Thank you!
I also love the shake to snooze on cm! it's should be standard on all alarms
Hi there,
i wonder if there is any way to mirror my Pixel XL Screen to my new TV (Samsung UE55KU6179). I don't talk about DLNA Share i can already use that. I want to mirror my screen to my TV Without MHL Cable or Google Chromecast. I know that Samsung devices work but why not my Pixel? I know that Samsung only Supports their own Stuff but there has to be any way to do this. Any app or Mod for this? Please help, i don't want to buy extra Chromecast Ultra, the TV was expensive enough. :cyclops:
Kind Regards
A custom ROM with Miracast enabled.
add this to your build.prop
persist.debug.wfd.enable=1
save and exit, reboot and profit
@Tugix1
Then go to settings, display and cast.
Press the 3 dots in upper right corner, check enable wireless display
Thanks but i can't get it to Work.. It says connecting but nothing happens. U Think it's because of modded system Files?
Gesendet von meinem Pixel XL mit Tapatalk
Tugix1 said:
Thanks but i can't get it to Work.. It says connecting but nothing happens. U Think it's because of modded system Files?
Gesendet von meinem Pixel XL mit Tapatalk
Click to expand...
Click to collapse
I had the same result... I have been making this change on my phones for a while and made this on my pixel xl. This works on my other phones, not the pixel though... let me clarify, the mod to build.prop works the option is there and it can be selected, but it never shows on tv.
marcjc said:
I had the same result... I have been making this change on my phones for a while and made this on my pixel xl. This works on my other phones, not the pixel though... let me clarify, the mod to build.prop works the option is there and it can be selected, but it never shows on tv.
Click to expand...
Click to collapse
Sigh...
Gesendet von meinem Pixel XL mit Tapatalk
I have tried it before on a Samsung TV but could never get it to work. However I was able to mirror screen on a Sony TV.
Sent from my Pixel XL using XDA-Developers mobile app
folks ... ? any result ???
I know this thread is old but I heard that VPN being enabled or disabled made this mod more or less functional for some users. I will be attempting this with my pixel 2 hopefully later today
Sent from my Pixel 2 using Tapatalk
Project will reborn as a new Project openkirin banned my work
Will Push them new
Bug: proximity sensor for case open/close are not working in this ROM.
Aside from this, things have been very smooth and stable, and it's s great start
CrazyPeter said:
Bug: proximity sensor for case open/close are not working in this ROM.
Aside from this, things have been very smooth and stable, and it's s great start
Click to expand...
Click to collapse
Working on it after pie release
I remember you from my old z2 times. Now i have Samsung tab s3, but thinking about switching to mediapad m5 as development on my current tab is very little. happy to see you here. thanks for your effort
I installed your Resurrection Remix a couple of weeks ago. I am really enjoying it, and not running into many problems, aside from the aforementioned magnetic case not turning on and off the tablet. I do want to ask you though (and forgive me, I'm not super tech savvy in regards to this, so my questions might be a bit dumb), does the kernel you use allow for over and under clocking? I've tried setting this in "Kernel Adiutor" and the cpu speeds I set never stick.... however changing the governors does. And does your kernel allow for fast/quick charge?
Regardless, thanks a ton for bringing a bunch of ROMs to the M5, I really appreciate it!
*Edit*: I just wanted to add, that one problem I am running into is that sometimes my bluetooth crashes. Seems to be random, and only starts working again when I reboot the system.
@rcstar6696
Thanks to you and your Friends for your good work !
This is a nice AND simple AND safe way to bring RR(1 of 4 from you) on Huawei OREO devices.
I hope my Donation help you !
JamesBott said:
@rcstar6696
Thanks to you and your Friends for your good work !
This is a nice AND simple AND safe way to bring RR(1 of 4 from you) on Huawei OREO devices.
I hope my Donation help you !
Click to expand...
Click to collapse
Thank you very much
@rcstar6696
deleted
JamesBott said:
@rcstar6696
if you need look here in DE
https://www.android-hilfe.de/forum/...3359/huawei-oreo-rr-los-openkirin.886228.html
Click to expand...
Click to collapse
Please delete this thread i don't want to mess with android Hilfe again
If you don't delete it i report the thread. Thank you
Do these ROMs work on both LTE and Wi-Fi only variants of the tablet?
Likely a problem with ASOP, but WiFi only tablets have an annoying amount of phone like features that can be disabled (or detected and removed);
No SIM card icon
No SIM card message
Volume buttons control ringtone , should control media volume
I'm sure there are other annoyances
CrazyPeter said:
Likely a problem with ASOP, but WiFi only tablets have an annoying amount of phone like features that can be disabled (or detected and removed);
No SIM card icon
No SIM card message
Volume buttons control ringtone , should control media volume
I'm sure there are other annoyances
Click to expand...
Click to collapse
I also have an Wifi only Mediapad and long searched for a fix for this.
A few days ago I found an answer and added this line to my build.prop:
Code:
ro.radio.noril=yes
Especially the "No SIM card - No service" text in the notification tray bother me and after adding the line it was gone and also the Settings for mobile networks disappeared.
I could deactivated the Phone and Messenger App, I don't know if it was impossible before.
About the Volume buttons, I am not sure, cuz I use the App "Volume Pie" that's default controls media volume anywhere.
Hmm... Why exactly did they ban your work?
Marcopoloy13 said:
I also have an Wifi only Mediapad and long searched for a fix for this.
A few days ago I found an answer and added this line to my build.prop:
Code:
ro.radio.noril=yes
Especially the "No SIM card - No service" text in the notification tray bother me and after adding the line it was gone and also the Settings for mobile networks disappeared.
I could deactivated the Phone and Messenger App, I don't know if it was impossible before.
About the Volume buttons, I am not sure, cuz I use the App "Volume Pie" that's default controls media volume anywhere.
Click to expand...
Click to collapse
Thanks, that fixed the SIM card messages, just need a patch to get sensible tablet control of the volume buttons.
I would seriously avoid this, there is something very bad smelling about OpenKirin.
The developers want to remain anonymous, there is no source code for audit, and of you ask awkward questions along these lines on the telegram channel they suddenly get very abusive.
All signs that something is not entirely right and there is something to hide.. (included malware or data harvesting???).
Huawei is now a huge player, and therefore a prime candidate for mass day harvesting from anyone that flashes a closed source ROM like this.
Anyone knows how to root after installing LOS?
Usually I would use TWRP to get it, but the stock recovery does not support it.
Gesendet von meinem CMR-AL09 mit Tapatalk
---------- Post added at 06:13 PM ---------- Previous post was at 06:10 PM ----------
CrazyPeter said:
I would seriously avoid this, there is something very bad smelling about OpenKirin.
The developers want to remain anonymous, there is no source code for audit, and of you ask awkward questions along these lines on the telegram channel they suddenly get very abusive.
All signs that something is not entirely right and there is something to hide.. (included malware or data harvesting???).
Huawei is now a huge player, and therefore a prime candidate for mass day harvesting from anyone that flashes a closed source ROM like this.
Click to expand...
Click to collapse
https://openkirin.net/about/
That doesn't look like they try to hide something
Gesendet von meinem CMR-AL09 mit Tapatalk
Signor Rossi said:
[/COLOR]https://openkirin.net/about/
That doesn't look like they try to hide something
Gesendet von meinem CMR-AL09 mit Tapatalk
Click to expand...
Click to collapse
Obviously nobody actually knows these people, I was looking for a source code link to audit and compile...
@Signor Rossi it's actually the same procedure as from this this thread https://forum.xda-developers.com/mediapad-m5/how-to/root-root-guide-huawei-mediapad-m5-t3786157.
What's the difference between the ROMs?
Well, check the ROMs own development pages. Openkirin simply build them for us, that's all. They are not "making" them.
Gesendet von meinem HTC U11 life mit Tapatalk