Note SM-N930F boot loop Hydrarom - Note 7 Questions & Answers

Hi All,
Sorry for my English, it's not my language.
I need your help because I think I have bricked my Note 7 after trying to install the last Hydra rom 1.3.5.
I explain you the situation:
I have installed custom TWRP => it was good
Then I have rooted with superU => it was good
Then I have tried to install hydra rom => the installation was OK
The phone reboot at the end of installation => phone stay on start screen "Hydra rom" and reboot (loop infinite)
I cannot power OFF the phone.
I cannot go to the recovery menu.
I can only go to the download mode.
So I have tried to re-install TWRP with ODIN but it was not working. Ondin detects my phone and when I click on start, I have the message "Fail" on ODIN and the phone reboot.
Do you have any ideas to help me?
Thanks.

Note 7 Problem - please help if you can, please
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.

What I did to make this work:
1 install TWRP
2 whipe format data "yes" x3
3 advanced format everything except external storage
4 reboot to download mode
5 open Odin on pc flash BL/CP provided in original Post of HydraRom
6 install HydraRom via TWRP
7 follow direction installation process
8 wait 5 mins boom!
Never fails for me.

I did that. I have already did that several time before. But I think I have understood the problem. My BL file is corrupt (may be during the download from the server)!
So I think the boot loader not working correctly! I have tried to reload one but without success. Directly Odin write "FAIL"...

Able to access Download mode only after Hydra flash. Solution?
Did this issue ever get a solution? I am having the same issue. I can enter into download mode only after the attempted hydra flash. Now it's stuck on "Hydra N7" boot screen. I had N930F flashed and running with twrp. When I attempted hydra I believe that the full rom did not flash, only 40 MB or so. To make matters worse I can't find where I jotted down my baseband, etc. It was originally N930X (live demo model). Now I get fails in odin. What can I do to remedy my situation. I read that I should flash BPH6 base files, but here it says AGO or AG2 BL. Which is it? How do I wipe the cache and data since I can only access Odin mode? I believe my BL is corrupted. Please help. I was going to trade my Note 7 in but my imei is all zeros and the boot loop. I'm not sure that they will refund or exchange in this condition. Although, they should since I doubt Samsung wants the liability of having these devices out there. Any thoughts on the matter?
Any insight and guidance is greatly appreciated!
Grace Downed in Denver

https://forum.xda-developers.com/note-7/help/note-7-error-t3562629
i have the same issue.. hoping someone would help us.

Related

[Q] flashing with heimdall ?

hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
supermario00 said:
hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
Click to expand...
Click to collapse
After flashing with odin and get in bootloop, press the power button for 10 seconds, after restart press home and power until get in to recovery, there should factory reset and the most important - fix rfs or something, can't remember now exactly, the phone will reboot automaticaly and you have to wait some time to boot.
Which method did you try to unlock it with?
HEllo,
Same problem, keep blinking trying to boot with Samsung white letters.
FR
What, and how EXACTLY did you tried to flash with odin? (Which rom, Onepackage/multipackage, tar/md5...?)
Hello,
Still fighting to bring it into life.
Well the problem began when unlocking with the thread instructions:
http://forum.xda-developers.com/showthread.php?t=1204705
Everything seemed to go as expected but...
After that it never rebooted well, still in cycle on www.samsung letters firs screen.
Even so i tried to flash it with ODIN into Stock Rom 2.3.5 and the same problem.
Sometimes i still can have the "Recovery Mode" and flash other versions, i have the PASS message ok, but when reboot... same problem.
And with the Oneclick Unbrick recovery it fails...
Really worried abou this... nice brick!
Thanks to all that are trying to help!
At the beginning of the process it hads the 2.3.3 version locked to Vodafone.
Maybe you just misspoke, but you can't use Odin if your phone is in recovery mode. It has to be in downloading mode.
In my opinion:
1. Boot into recovery (are you using cwm?)
2. Do a factory reset+wipe everything (incl. dalvik cache)
3. Turn off the phone
4. Download the latest ROM from here: http://forum.xda-developers.com/showpost.php?p=16979769&postcount=547
(S5660XXKS2)
5. Boot your phone into downloading mode
6. Flash with Odin (this is NOT "One package", you have to put everything in the right spot /boot, phone, etc/)
Hello again,
Yes i mean Download mode, i', flashing with ODIN but "one package Versions" i'm goin to try next your link already downloading.
Even if i can not unbrick it (wich is strange because i still can flash it) i must thans you very much for great cooperation!
Working...
You're welcome. When I bricked my phone, this is how I got it working again. I hope it works for you too.
Keep my posted...
Hello again,
Well just flashed again with ODIN (not One Package) and last firmware (2.3.5) and the report is that at the end i have the PASS confirmation but phone keeps flashing and does not reboot alone as supposed (waited 15 mn).
Unplug USB cable, battery out, battery in, power on and it returns to its "preference": alternates between dark scredn and those White letters saying SAMSUNG... infinite loop.
This is strange, i'm tired of seaching everything and this is not a normal beahaviour for this procediure.
I can follow all the steps... and at the final... same result.
Don't really know what to do next.
Once more, thanks for all!
Fernando
I'm sorry it didn't work. I have one last suggestion. The firmware you just tried to flash has a few md5 files. Rename them to tar, an extract them. The files you will find inside are the ones you can flash with Heimdall (data.rfs, system.rfs, etc).
I can't tell you much more, because I never used it (just googled a bit right now), but you can probably find a few tutorials about the subject.
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
descobrindo said:
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
Click to expand...
Click to collapse
please give more information about stuck on logo (ex: logcat)
and dont play with EFS partition. its very dangerious.
it can really bricked your phone
When you can go to recovery mode with your gio you should flash ext4-formatter.zip(download,put on sdcard,go to recovery find `installzip from sdcard` and flash it.
the internal phone memory has to be in ext4 format ,if not you have the above problems.
after flashing you can install a rom.
By the way,i tryed flashing with heimdall-frontend ,i think it can ,but you have to rename it to a .tar gz file it wil be compiled automatic adding it to heimdall,but...than it says
`firmware.xml is missing from the package` , so...you have to ad(make or edit an existing one,and insert it in the package) that file... which contains name rom ed , than it probably works...
What is heimdall?
sort of odin but odin doesnt run on linux,for flashing
SOLUTION!!
Hey , I figured out a while back how to sort this out... Odin works,The reason though it bootloops is just that the \Data and \Cache Partitions are still in Ext4 Format... Stock Rom uses RFS... So The Solution is - After you Flash Your Stock Rom Via Odin, after it says "PASS" , Unplug USB then Reboot into the stock recovery mode by Holding HOME and POWER Button , Then format Cache and Then Wipe Data/Factory Reset (By doing this it formats back to RFS and then it can operate) ... then reboot to system ... And Voila , It works!!!! (Always works for me)... Hope this Helps Just Remember to USE ODIN (Heimdall apparently not Gio Supported)

[HELP!] Odin Firmware flash failed at hidden.img. Stuck in DL Mode. T700. Plz Help Me

Hi Everyone,
I am a new owner of a soft-bricked SM-T700. I am feeling very down and need some advice. I will be as thorough as I possibly can and I would truly, truly appreciate some help and advice from you kind folks. This is the first time I have had a bricked device out of my many Android devices.
My PLAN:
-Root
-Custom Recovery
-Nandroid Backup
-Backup EFS
-Flash stock western country firmware
What HAPPENED
Today I bought a wifi T700. I bought it in my hometown, which is China. Whenever I buy a new Android device in China my first action is to ensure it doesn't have any hardware/warranty issues. I then go about reflashing a western firmware so I can use Google services.
1) First I rooted using CF-Auto Root. That worked fine. I confirmed that I had root using an app called root checker.
2) I then attempted to flash TWRP recovery by following the instructions here: http://teamw.in/project/twrp2/238
- First I tried flashing the .tar file using Odin. As soon as I hit 'Start' Odin froze and I got the Windows error saying "Odin Downloader Has Stopped Working", asking to close the program. I close the program. I tried this several times then rebooted. It seemed as though the phone booted fine.
- I then tried using their own software, TWRP manager, here: http://jmzsoftware.com/twrp-manager-4. This app just crashed every time I booted it. I submitted an error log.
- I then tried using 'Flashify' as suggested by someone here on XDA. Once I did that it said flashed successfully and would I like to reboot. I said yes. This is when my troubles started.
3) Upon reboot it immediately booted into a sparse looking 'Download Mode' screen, all in English (the normal one on mine has some Chinese too) without the volume button options to reboot or continue. It just went straight into this screen.
After trying to reboot the phone using several power button holds and key combinations, it appears I am stuck in this screen, so I thought I had no chance of doing a NADROID backup as originally planned, so I decided to try my luck and flash the western firmware.
I tried to flash the version of the firmware provided here: http://forum.xda-developers.com/showthread.php?t=2798835
http://www.androidfilehost.com/?fid=23501681358556680
It got all the way through the install until it hit the hidden.img and then failed. I've attached a screen capture.
A few notes;
I have tried using two different USB cables (the one that came with it, and the one that came with my HTC One). I have tried several USB plugs, including the one in the back of my PC. I allowed Odin to do it's MD5 check and it said the file checks out.
I have tried using the Kies emergency Firmware recovery. Pffft! As it that was going to work. Damn Kies.
I sound like I've still got my sense of humor, but actually I am really cut up about this. It is so much money for a tablet and now it is useless unless I can get s firmware that will flash.
I don't have my stock Chinese firmware. That is T700ZCU1ANF4/T700CHN1ANF4/T700ZCU1ANF4/T700ZCU1ANF4 (CHN).
Questions:
Does anyone know where I could find the stock Chinese firmware to try flashing back to that?
Does anyone have the .PIT file and instructions on how to flash that, because I have read in other threads that it solves the hidden.img problem.
Does anyone know why this may have happened and have any alternative suggestions?
Could it have been the TWRP that actually caused this? The thread here indicates others aren't having trouble. Why would it have frozen for me?
I will try anything at this point. I am desperate.
Thanks so much in advance. Please come through XDA! Please come through Galaxy Tab S owners!!!!!!
-------------------------------------------
CLOSURE EDIT: I managed to flash Australian firmware, after reinstalling Kies, uninstalling and reinstalled the device drivers. I also made sure all Kies processes were killed before flashing with Odin.
For people in a similar situation I would urge them to have patience and keep trying to flash stock firmware.
Private Message UpInTheAir and see what he thinks.
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
The program crashing is when you should back off from trying to flash. Reassess what you did and what happened and if it's failing at a point flash the stock back before rebooting.
Continuing blindly was the problem. On something as expensive as a tablet never continue past a point where something goes wrong without reflashing back to stock and starting again.
As eousphoros said Use heimdall and flash a recovery.
Good luck.
eousphoros said:
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
Click to expand...
Click to collapse
Hi All,
Thanks for taking the time to reply.
You are certainly right that it is my fault and I should have stopped at some point and reassessed what was happening.
Can you please give me some more information about the steps you have offered? I am researching heimdall now, but if you could give some steps or advice that would be much appreciated.
It's probably going to be difficult because I assume we are in different timezones. I will persevere and try to get this worked out.
I have downloaded Heimdall and understand that it is an alternative to using Odin.
I currently have three questions about Heimdall.
1. Do I need to do the install drivers step if I have already installed the drivers for my device? Is this some step that actually replaces the current drivers with ones that are required for Heimdall to operate? I ask them because when I list USB devices, my tab is not shown up as Samsung Composite Device. It is actually shown as two separate entries, looking like generic USB entries.
2. Do I need to have a valid PIT file in order to run a custom Heimdall flash?
3. Which partition should I select if/when I run the Heimdall flash?
I'm dying a little inside every time I look at my tablet
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
eousphoros said:
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
Click to expand...
Click to collapse
First of all, let me just say that OH MY F#@$ING GOD I THINK THE NIGHTMARE IS OVER!!!! I managed to flash the Australian Firmware successfully. It has now booted fine, I have factory reset and I am in the process of setting up the device afresh.
Having said that, when I do come to reroot and install a custom recovery, I will definitely take a look at yours. Was this here 12 hours ago? I looked and couldn't find anything about CWM except for a short thread and an unofficial port. I have never tried TWRP before and I will avoid it like the plague in the future. I have NEVER had trouble with CWM.
When (if ever) I get the nerve up to give this another go, I will try your CWM.
Thanks again.
I am so relieved right now.....
And make a Nandroid first this time
Hey,
I had the exact same issue with my Galaxy Note 8, every time I tried to install European or custom Rom.
The only way to get the tab back was to flash with the Chinese firmware. You may find it easily on Baidu.
Since it happened also with a note 2 and note 3, I stopped buying Android device in China... Unless you can make sure that you buy a model coming from HK.
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
ky3bmu4 said:
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
Click to expand...
Click to collapse
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
ky3bmu4 said:
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
Click to expand...
Click to collapse
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
pierrotee said:
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
Click to expand...
Click to collapse
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
ky3bmu4 said:
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
Click to expand...
Click to collapse
Cool! So do you now have root and custom recovery?
pierrotee said:
Cool! So do you now have root and custom recovery?
Click to expand...
Click to collapse
Yeah))
TWRP installs OK via TWRP Manager
I installed TWRP Manager, selected 'klimtwifi' as the device, and it successfully installed TWRP 2.7.1.1 without a hitch.
From TWRP I then immediately performed a nandroid backup of everything but the caches to my microSD card and encountered no problems.
The last step was to enable writing to my microSD card by installing NextApp SDFix.
My SM-T700 is bricked as well and I tried to flash a custom recovery with Heimdall on Mac but it gave me the Error "Claiming Interface failed". Seems like you really need the pit.

problems

Hi,
Hi I was given an s3 sprint. It doesn't get past the sprint screen, but when plugged in it goes all the way until played with then it'll reboot. It does however go into download and recovery mode which leads me to believe its a software problem. The phone is not rooted/ fully stock. Could someone walk me through rooting, installing custom recovery and ROM via Odin? Also there seems to be no water damage. Per download mode:: binary-samsung official
System satus-official
Qualcomm secure boot enable
Warranty-0
Bootloader ap swaev-2
PS I already tried Odin but failed at aboot mbn. Now upon booting it reads ... firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
Pleas ask in here instead. Also first get the phone working by either flashing it using kies 2.6, or by using odin and flashing this image. Be sure to unzip it first.

Bootloops After ODIN back to Stock Firmware

Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error

Note 7 possibly bricked

Hi all,
so im coming here to ask you for a help.
Yesterday i have read about samsung pushing deactivating update for our notes 7, i have panicked and immediately started with installing TWRP, HydraRom and root to block incoming updates.
But, as i have already found out, my skills with android and flashing are already gone. So i have installed twrp, then rom and tried to reboot but phone was showing a lot of error messages and notification about low memory, which is weird. After couple of hours of seeking i have found out, that i should try to fix /data and /storage in TWRP by converting from EXT4 to ExFat... So i tried it, but phone suddenly died when it was repartitioning and now im stuck with note which is unable to boot or go to recovery. I can get into download mode yet when i try to flash anythin (whole rom, just bl, TWRP) odin shows immediately FAIL!
Does anyone know if there is way how to fix my note 7? I was thinking maybe a PIT file would help, but im unable to find one...
EDIT: Tried methods found here http://forum.xda-developers.com/note-7/how-to/fix-samsung-note-7-snapdragon-exynos-sm-t3443753 but no luck, same story with smartswitch as Odin, flash begins but immediately fails and note comes out of download mode.
So I have made decision, that I will add bounty - 50 bucks (will pay through PayPal) to anyone who will find way how to make my note work!
You should return your Note 7 to Samsung. Its safer and if want to do trial and error. I've found it possible to rescue any phone as long as you can put it in download mode ?
Sent from my SM-N930F using XDA-Developers mobile app
I know i should return it, but i really want to keep it atleast as a second phone, anyone has a solution please ?
Before trying to install twrp and custom Rom what firmware were you on? If I were you I'd download the stock firmware from Samsung site open Odin and put phone into download mode I'm sure that will work.
I was on the newest one, with green battery indicator. I have already tried flashing official rom downloaded from sammobile, but odin always only states fail! After a second, meanwhile phone leaves the download mode and gets stuck on bootloop.
When I try to entry recovery phone gets stuck on TWRP screen but doesn't actually start TWRP.
I will send 50 bucks through PayPal to first of you guys, who will lead me to the successful repair of my note!

Categories

Resources