Develop Bugs

[Q] Stuck in boot loop, trying to return to stock, I think I need to use PIT file

Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.

i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.

edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.

invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.

Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?

invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.

Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!

invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^

Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!

invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S

Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.

invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk

Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.

Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)

mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.

mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem

same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally

woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop

[Q] N7100 stuck at boot screen after flashing stock 4.4.2

Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy

beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?

beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.

I am having similar problem.
Tried to flash the TWRP Recovery from THIS via Odin.
Still phone isn't going past the Galaxy Note II logo.

Sidz4u said:
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?
Click to expand...
Click to collapse
Thanks for the reply.
It processes OK and Odin says 'Pass!', but then it automatically restarts and gets stuck at the boot screen again. Still can't boot into recovery mode.

AliverMD said:
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.
Click to expand...
Click to collapse
Thanks for the suggestion. Just tried that, but unfortunately it just does the same thing ....

Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:

devrog17 said:
Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:
Click to expand...
Click to collapse
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.

beardyweirdy said:
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.
Click to expand...
Click to collapse
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......

devrog17 said:
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......
Click to expand...
Click to collapse
Just tried, but to no avail again. Thanks anyway. Anybody else got any suggestions as to what I might try? I'm starting to lose hope a bit here

Try to boot in recovery and do a factory reset

devrog17 said:
Try to boot in recovery and do a factory reset
Click to expand...
Click to collapse
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything

C
beardyweirdy said:
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything
Click to expand...
Click to collapse
Just to close this thread off, I've now paid to get the phone sorted at a local shop. Took them a while (think their first level support just tried all the things I'd already done), but their occasional staff member and all round guru managed to get it sorted. I don't know what he did as I didn't get the chance to speak to him. Cost me £30.

[Q] Stuck at Samsung boot screen! I've tried everything...

Experienced Galaxy rooter here. I used Odin Mode on the Sg3 as well as my gf Pro tab 8.4 and my 10.1 as well. Ive never had problems until now. So here's what happened today:
This morning
I decided to install Twrp using Flashify. Having been rooted for months, it worked. I then installed Cm 11 using TWRP. I wiped cache and installed gapps from goo manager. Everything went smooth. I played around with it for about an hour. No problem.
Then I installed Team freezes ROM. I used flashify. Everything seemed normal, then I realized I couldn't get past Samsung title screen. So i plugged up to Odin and installed stock Recovery. Nothing. Reinstalled TWRP... can't get into Twrp. Used Odin again to install Phillz.. Nothing.
Once again I installed original stock through Odin. Here I am again stock at the Samsung boot screen. I can only do three things 1. Turn off 2. Reset 3.odin mode
What do i do?
I just want to get this thing to boot so i can see what happened or at lest into some sort of recovery where i can load from sd

If you're in Download (Odin) Mode....
Make sure you have S/N on hand.
Enter Download Mode and run KIES3, choose Firmware Upgrade and Initialization
Enter model number and S/N
Returning to bone stock may take an hour, so make sure the battery is fully charged. Moreover, YOUR TAB WILL BE TOTALLY WIPED AND GO BACK TO BONE STOCK!

mingkee said:
If you're in Download (Odin) Mode....
Make sure you have S/N on hand.
Enter Download Mode and run KIES3, choose Firmware Upgrade and Initialization
Enter model number and S/N
Returning to bone stock may take an hour, so make sure the battery is fully charged. Moreover, YOUR TAB WILL BE TOTALLY WIPED AND GO BACK TO BONE STOCK!
Click to expand...
Click to collapse
Thanks for this. I lost my system due to System Cleaner 2 fudgin' it up on reboot. I was about to hassle Best Buy into an exchange but gave this a try. I thought I had it made by doing a factory reset but even that didn't work. Luckily Kies came to the rescue after I figured out they wanted a generic model SM-T320, not the rest of it. Again thanks to you mate!

Stuck in "blue" screen/odin and can't flash anything successfully

So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
The phone is about to go in the trash...Help!

sfinkedbeef said:
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
Odin Screen Reads:
ODIN MODE (red)
PRODUCT NAME: SM-G920P (white)
CURRENT BINARY: Samsung Official (white)
SYSTEM STATUS: Custom (White)
FRP LOCK: OFF (white)
Secure Download: Enabled (blue)
KNOW WARRANRY VOID: 1 (0x0384) (gray)
AP SWREV: B:3 K:2 S:2 (gray)
The phone is about to go in the trash...Help!
Click to expand...
Click to collapse

What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7

1619415 said:
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
Click to expand...
Click to collapse
Thanks for replying.
I tried Kies and Smart Switch, but both did not recognize phone. I did manage to find out that TWRP has a sprint variant and that it seems to be incorrectly labeled in many posts. The sprint variant is 2.8.7.0 NOT 2.8.7.1. I managed to flash it in ODIN and now it boots into Recovery, which is a start. I tried applying the renegade rom, but it wouldn't finish and I'm left with a 'no OS detected, do you want to reboot?' from TWRP.
TWRP website isn't much help (but I love that product). At this point, still cannot tell what firmware is on device and where to go from here. I think I may need a recovery of some sort, but don't have. Tried flashing OJ7 tar as recommeded but it continues to fail when it hits the 'system' part of the download.
Still need advice/help....etc.

Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.

1619415 said:
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
Click to expand...
Click to collapse
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.

sfinkedbeef said:
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
Click to expand...
Click to collapse
, NP glad I could help.

no roms install on my s6 edge after forget to copy rooms file into TWRP
1619415 said:
, NP glad I could help.
Click to expand...
Click to collapse
now my phone in download " blue screen " mode
please someone help me :crying:

billyfatra said:
now my phone in download " blue screen " mode
please someone help me :crying:
Click to expand...
Click to collapse
You should be able to use odin on your PC tp send an image to your phone.
Lookup, for example, how to root your phone in these threads.
Sent from my SM-G920P using Tapatalk

[Solved] Alternating between TWRP and Samsung logo

Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!

Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.

Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,

Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct

Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,

Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??

Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,

Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.

Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse

WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse