Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.
Friend, try Google for KIES3. After installation under the Menu bar..look into something recoveries..
There you'll need to enter your model and serial no.
Boot your hp to DOWNLOAD MODE and plug to your usb. Then let KIES do its work.
Hope it helps
53N53L355 said:
Friend, try Google for KIES3. After installation under the Menu bar..look into something recoveries..
There you'll need to enter your model and serial no.
Boot your hp to DOWNLOAD MODE and plug to your usb. Then let KIES do its work.
Hope it helps
Click to expand...
Click to collapse
That didnt work
Mbrar15 said:
Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.
Click to expand...
Click to collapse
POST the complete ODIN log here.
...
Mbrar15 said:
Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.
Click to expand...
Click to collapse
Did you end up figuring it out?
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.
Go into download and let us know what is shown on the screen.
audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!
OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app
gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?
I have an i747 and after a week of research and trail and error I was able to get back to a factory working phone. I wanted to share my findings so that the next person may get up and running a bit quicker. First off, my phone was never rooted. I was getting it ready to sell and was going to factory reset it when I realized I forgot the system password. So I installed Kies and proceeded to factor rest it there. For whatever reason the reset did not take and after several failed attempts with kies the phone began to boot in ODIN mode. I built a USB jig and was able to get back into download mode but nothing would bring it back to life. Downloading the official rom from sammobile and flashing with ODIN3.07 would fail every time. Emergency recovery in kies also failed. So here was my final approach that worked. Maybe the wrong way to do this, maybe the long way to do it.. IDK.. but it worked for me..
1) get the official Samsung files from kies (google -"does kies store firmware")
2) boot do download mode
3) flash CSC file with auto reboot and F. reset time checked
4) boot do download mode
5) flash PDA file with auto reboot and F. reset time checked
6) boot do download mode
7) flash Modem file with auto reboot and F. reset time checked
* I closed ODIN between each step, might be overkill.
** I did not flash the bootloader file
I have read that it takes a long time the first boot, and I have been waiting 15 minutes at the SAMSUNG screen but it is still pulsing so i think it is still processing. If it is still at this screen in the morning, I will let you all know but this is further than I have been in over a week.
On a side note, when it crashed I took this into AT&T they told me over the past month or so they have seen numerous people with the same issue. All from doing a factor rest in Kies. My phone was out of warranty and they barely looked at it before asking me to upgrade. I took it to BestBuy and they fixed it from booting to ODIN mode but it still locked up on the AT&T logo, so I was back to square one.
Food for thought. How about waiting to see if your instructions actually work on your phone before posting them here for people with similar issues to use. Kind of useless if it doesn't end up working, huh?
lordblue969 said:
I have an i747 and after a week of research and trail and error I was able to get back to a factory working phone. I wanted to share my findings so that the next person may get up and running a bit quicker. First off, my phone was never rooted. I was getting it ready to sell and was going to factory reset it when I realized I forgot the system password. So I installed Kies and proceeded to factor rest it there. For whatever reason the reset did not take and after several failed attempts with kies the phone began to boot in ODIN mode. I built a USB jig and was able to get back into download mode but nothing would bring it back to life. Downloading the official rom from sammobile and flashing with ODIN3.07 would fail every time. Emergency recovery in kies also failed. So here was my final approach that worked. Maybe the wrong way to do this, maybe the long way to do it.. IDK.. but it worked for me..
1) get the official Samsung files from kies (google -"does kies store firmware")
2) boot do download mode
3) flash CSC file with auto reboot and F. reset time checked
4) boot do download mode
5) flash PDA file with auto reboot and F. reset time checked
6) boot do download mode
7) flash Modem file with auto reboot and F. reset time checked
* I closed ODIN between each step, might be overkill.
** I did not flash the bootloader file
I have read that it takes a long time the first boot, and I have been waiting 15 minutes at the SAMSUNG screen but it is still pulsing so i think it is still processing. If it is still at this screen in the morning, I will let you all know but this is further than I have been in over a week.
On a side note, when it crashed I took this into AT&T they told me over the past month or so they have seen numerous people with the same issue. All from doing a factor rest in Kies. My phone was out of warranty and they barely looked at it before asking me to upgrade. I took it to BestBuy and they fixed it from booting to ODIN mode but it still locked up on the AT&T logo, so I was back to square one.
Click to expand...
Click to collapse
Seems a pretty long route to take. If you are on an Odin flashable firmware version (e.g. 4.1.1), you only need to flash one partition - PDA. This updates all partitions to stock including bootloader, modem, recovery, kernel. The newer firmware versions - 4.1.2 & 4.3 are, however, not Odin flashable. Also, if you couldn't do a factory reset from settings because of password issues, you could have booted into recovery mode and done a factory reset there. This wouldn't require a password and would still have the same effect of wiping data and returning to factory settings.
If your phone is stuck at the Samsung screen for 15 minutes, then it's stuck. Reboot into recovery mode and try a reset there. If this doesn't work, then it means you have a soft brick you need to restore your firmware via custom recovery. Your phone is never hard bricked when you can get to download and recovery modes. Flash custom recovery via Odin in download mode. Reboot to custom recovery and flash a clean, complete stock image for 4.3. That's your best option now since you are selling
Larry2999 said:
Seems a pretty long route to take. If you are on an Odin flashable firmware version (e.g. 4.1.1), you only need to flash one partition - PDA. This updates all partitions to stock including bootloader, modem, recovery, kernel. The newer firmware versions - 4.1.2 & 4.3 are, however, not Odin flashable. Also, if you couldn't do a factory reset from settings because of password issues, you could have booted into recovery mode and done a factory reset there. This wouldn't require a password and would still have the same effect of wiping data and returning to factory settings.
If your phone is stuck at the Samsung screen for 15 minutes, then it's stuck. Reboot into recovery mode and try a reset there. If this doesn't work, then it means you have a soft brick you need to restore your firmware via custom recovery. Your phone is never hard bricked when you can get to download and recovery modes. Flash custom recovery via Odin in download mode. Reboot to custom recovery and flash a clean, complete stock image for 4.3. That's your best option now since you are selling
Click to expand...
Click to collapse
So like the true repository of knowledge we have here, Larry you are correct.. After about 30 minutes I decided it was really stuck.. So this time I watched the process I described above a bit more closely and as you stated the PDA file is all i needed.. but I had tried several from different sources including the office from sammobile and they always crashed. So what eventually worked for me was after being stuck at the samsung logo...
I booted into recovery mode
wiped the cache
factory reset it
then flashed with the Kies PDA file that I obtained in Kies in emergency recover mode.
This finally worked.
and as stated was a shorter route to take. The PDA that i used had 4.1.1 on it.
Thanks for the clarification in the fact that flashing with the PDA takes care of the bootloader, cache, file system, etc.
DMF1977 said:
Food for thought. How about waiting to see if your instructions actually work on your phone before posting them here for people with similar issues to use. Kind of useless if it doesn't end up working, huh?
Click to expand...
Click to collapse
excitement over came me.
Still having issues
Ok, keepers of knowledge.. I have a phone that will boot up but I have no baseband version. It shows unknown.. I have tried just flashing the modem file but i still do not get it back.. if I try to flash anything other than the official files from kies, ODIN fails. My phone is now at 4.1.1, build JR003L.I747UCDLK3.
If I try to update via wifi with the software updater, it says I am up to date. If I try to update with Kies, it fails..
I am at a loss...
Please help..
Thanks in advance..
Hi, I have an N7105 running android 4.2.2 latest version in my country. Recently, my phone got semi bricked, not sure why, and wouldn't get past the logo. I flashed the stock rom (N7105XXUFNJ1_N7105OLBFNJ1_MM1) for the first time via ODIN 3.07 and ODIN failed. However, I still manage to get into download mode. So i decided to update the samusng mobile phone drivers via kies, used a different USB port and charged the battery for awhile before trying again. I flashed the same firmware with the same ODIN version (3.07) and unfortunately, it failed again. As in it didn't even managed to inject the system successfully. Now, I have a bricked device that neither will boot into download/recovery mode. May I know what's the cause of the issue? Is there any way to revive it? Thanks so much.
Hi i was helping my friend to update his firmware. after doing so the phone is now stuck in a weird bootloop. i had seen my fair share of bootloops but this seems weirder than others. the n7100 logo would loop very quickly (sorta like flash) and keeps doing so. can't enter recovery mode at all, only download mode. plug it to odin and whatever i can throw at it i just got nand write start fail, be it twrp, multiple versions of stock rom. im at the end of my wits, so what should i try next? thank you for any input
What is the Odin error when trying to flash the latest stock ROM from sammobile.com? Tried different USB cables and USB ports?
I kinda have/had the same problem.
N7100 logo would bootloop quiet fast (doesn't get to the point where it should load the rom).
Can't enter recovery bc of that.
Only thing that works is download mode.
After trying to flash newest stock rom (4.4.2) it failed once (I think my cable gets too old...)
Next try it worked without a problem.
Problem persists.
Next step was flashing an older repair firmware (4.1.2) but it failed (I think bc of the 4.4.2 bootloader? IDK)
Then I tried to flash the newest stock again but with the pit file. Flashed without a problem but the problem was still there.
Last step I made was to flash the newest stock with the pit file and nand erase + update bootloader.
Tried it 2 times but it failed.
Now I'm stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Download mode got a red message also: "RPMB: INVALID RPMB DATA"
I don't know what to do now. Please help.
PS: It was a "new" motherboard from aliexpess, it had a chinese version of the stock 4.1.2 if I remember right and was already rooted when I installed it. I wanted to flash the newest 4.4.2 for the new modem and stuff and then upgrade to lineage. :/