[Q] Odin flash doesn't work - Galaxy Note II Q&A, Help & Troubleshooting

Hi, I have an N7105 running android 4.2.2 latest version in my country. Recently, my phone got semi bricked, not sure why, and wouldn't get past the logo. I flashed the stock rom (N7105XXUFNJ1_N7105OLBFNJ1_MM1) for the first time via ODIN 3.07 and ODIN failed. However, I still manage to get into download mode. So i decided to update the samusng mobile phone drivers via kies, used a different USB port and charged the battery for awhile before trying again. I flashed the same firmware with the same ODIN version (3.07) and unfortunately, it failed again. As in it didn't even managed to inject the system successfully. Now, I have a bricked device that neither will boot into download/recovery mode. May I know what's the cause of the issue? Is there any way to revive it? Thanks so much.

Related

Please help ATT galaxy stuck at firmware upgrade encountered an issue screen

I used oddin 1.85 to root my galaxy s3 AT&T phone SGH1747 android 4.3 i followed the directions and when i tried to root it shows failed and i thought that it was finish doing whatever and then i unplugged and now my phone is stuck at firmware upgrade encountered an issue please select recovery mode in klies and try again. I tried removing the battery turning it back on and its still stuck at the same screen. Im new at this please help.
dime10 said:
I used oddin 1.85 to root my galaxy s3 AT&T phone SGH1747 android 4.3 i followed the directions and when i tried to root it shows failed and i thought that it was finish doing whatever and then i unplugged and now my phone is stuck at firmware upgrade encountered an issue please select recovery mode in klies and try again. I tried removing the battery turning it back on and its still stuck at the same screen. Im new at this please help.
Click to expand...
Click to collapse
Just reflash the same rom, this can happen if the odin flash fails. All you have to do is reflash the same rom, if it fails again then just try another USB cable. And one more thing, make sure that the rom you are flashing is the right one.
Are you flashing the phone on a PC? I'm asking because I think the latest release of Odin is 3.07. Using an outdated version of Odin and/or drivers may have caused of the problem.
Since you're on AT&T running 4.3, you cannot reflash an AT&T ROM because there is no AT&T 4.3 ROM that is flashable via Odin. Do not try to flash any ROM that tries to flash an older bootloader because this will brick your phone.

[Q] Firmware Flash failed - New flash won't work

Hello guys.
I got a SM-T310_NA. It was not rooted and everything original.
I tried to root it a few times following this droidviews dot com/root-galaxy-tab-3-8-0-sm-t310-on-kitkat guide.
Odin always said that everything worked and my tablet restarted, I didn't know what the problem was. I had drivers installed and everything.
So then I tried to flash a firmware over Odin, but then something didn't work out and my tablet didn't get the full flash.
Now I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". I tried to recover it with Kies, it didn't work.
I downloaded the original firmware from sammobile and tried to flash it, it didn't work either. I think I need a 3-part-flash with Odin, but I don't know where to get the datas.
Can you guys help me out?

[Q] Stuck in Firmware Upgrade Encountered an Issue, Odin cannot detect my phone.

So I'm an idiot. I was attempting to upgrade from 2.3.6 to 4.0.4 on my (rooted) SGH-T989 Samsung Galaxy S2 Hercules, flashing in Odin 3.07, but placed the .tar in the CSC place instead. Now, I can't even access recovery, my phone instantly boots up into Firmware Upgrade Encountered an issue screen. By an off chance, my phone connected and was detected by Odin once. However, in my attempt to revert to a stock rom, it failed. Now Odin AND KIES won't recognize my phone. I have attempted to re-download Odin/drivers and restart phone/computer. I have tried different drivers. Any help would be much appreciated.
Hi,
If your device is showing up in you PC's device manager as QSUSB_DLOAD or similar... You are bricked, and likely need a repair center to fix it.
I will have your thread moved to your device section for other opinions.
Good luck!

problems

Hi,
Hi I was given an s3 sprint. It doesn't get past the sprint screen, but when plugged in it goes all the way until played with then it'll reboot. It does however go into download and recovery mode which leads me to believe its a software problem. The phone is not rooted/ fully stock. Could someone walk me through rooting, installing custom recovery and ROM via Odin? Also there seems to be no water damage. Per download mode:: binary-samsung official
System satus-official
Qualcomm secure boot enable
Warranty-0
Bootloader ap swaev-2
PS I already tried Odin but failed at aboot mbn. Now upon booting it reads ... firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
Pleas ask in here instead. Also first get the phone working by either flashing it using kies 2.6, or by using odin and flashing this image. Be sure to unzip it first.

Weird n7100 bootloop

Hi i was helping my friend to update his firmware. after doing so the phone is now stuck in a weird bootloop. i had seen my fair share of bootloops but this seems weirder than others. the n7100 logo would loop very quickly (sorta like flash) and keeps doing so. can't enter recovery mode at all, only download mode. plug it to odin and whatever i can throw at it i just got nand write start fail, be it twrp, multiple versions of stock rom. im at the end of my wits, so what should i try next? thank you for any input
What is the Odin error when trying to flash the latest stock ROM from sammobile.com? Tried different USB cables and USB ports?
I kinda have/had the same problem.
N7100 logo would bootloop quiet fast (doesn't get to the point where it should load the rom).
Can't enter recovery bc of that.
Only thing that works is download mode.
After trying to flash newest stock rom (4.4.2) it failed once (I think my cable gets too old...)
Next try it worked without a problem.
Problem persists.
Next step was flashing an older repair firmware (4.1.2) but it failed (I think bc of the 4.4.2 bootloader? IDK)
Then I tried to flash the newest stock again but with the pit file. Flashed without a problem but the problem was still there.
Last step I made was to flash the newest stock with the pit file and nand erase + update bootloader.
Tried it 2 times but it failed.
Now I'm stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Download mode got a red message also: "RPMB: INVALID RPMB DATA"
I don't know what to do now. Please help.
PS: It was a "new" motherboard from aliexpess, it had a chinese version of the stock 4.1.2 if I remember right and was already rooted when I installed it. I wanted to flash the newest 4.4.2 for the new modem and stuff and then upgrade to lineage. :/

Categories

Resources