Hello guys.
I got a SM-T310_NA. It was not rooted and everything original.
I tried to root it a few times following this droidviews dot com/root-galaxy-tab-3-8-0-sm-t310-on-kitkat guide.
Odin always said that everything worked and my tablet restarted, I didn't know what the problem was. I had drivers installed and everything.
So then I tried to flash a firmware over Odin, but then something didn't work out and my tablet didn't get the full flash.
Now I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". I tried to recover it with Kies, it didn't work.
I downloaded the original firmware from sammobile and tried to flash it, it didn't work either. I think I need a 3-part-flash with Odin, but I don't know where to get the datas.
Can you guys help me out?
Related
Hey everyone. I'm having problems with my Galaxy S III/SGH-I747. I was having problems with it shutting off randomly. I didn't start having this problem until I got the Android 4.1.2 update. I did a factory reset a few times and that didnt fix it. So I decided to wipe it completely and flash either 4.0.4 or 4.1.1 back on it. Something went wrong during that process and it failed. Now, I start it up, and it just says "Firmware Recovery Interrupted". No It won't let me do anything. I've tried the Emergency Firmware Recovery Tool with the Samsung Kies software, and it fails during that. I tried flashing the stock ROM again, and it fails. I even Rooted it, and flashed ClockworkModRecovery and tried installing a custom ROM. It failed during those. So I'm really stuck. Is there ANYthing I can do to fix this? If so, I'd really appreciate you sharing it with me. Lolz.
Thank you in Advance.
P.S. The picture below says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I used oddin 1.85 to root my galaxy s3 AT&T phone SGH1747 android 4.3 i followed the directions and when i tried to root it shows failed and i thought that it was finish doing whatever and then i unplugged and now my phone is stuck at firmware upgrade encountered an issue please select recovery mode in klies and try again. I tried removing the battery turning it back on and its still stuck at the same screen. Im new at this please help.
dime10 said:
I used oddin 1.85 to root my galaxy s3 AT&T phone SGH1747 android 4.3 i followed the directions and when i tried to root it shows failed and i thought that it was finish doing whatever and then i unplugged and now my phone is stuck at firmware upgrade encountered an issue please select recovery mode in klies and try again. I tried removing the battery turning it back on and its still stuck at the same screen. Im new at this please help.
Click to expand...
Click to collapse
Just reflash the same rom, this can happen if the odin flash fails. All you have to do is reflash the same rom, if it fails again then just try another USB cable. And one more thing, make sure that the rom you are flashing is the right one.
Are you flashing the phone on a PC? I'm asking because I think the latest release of Odin is 3.07. Using an outdated version of Odin and/or drivers may have caused of the problem.
Since you're on AT&T running 4.3, you cannot reflash an AT&T ROM because there is no AT&T 4.3 ROM that is flashable via Odin. Do not try to flash any ROM that tries to flash an older bootloader because this will brick your phone.
Hello there,
I've previously used Odin to install several versions on several phones, so at leas I know some very basics, like, using Odin and what not.
Here's my problem. I rooted my 4.3, it gave me some trouble, and the main reason I wanted it rooted was to get backups for my apps. Turns out I can back up my data with carbon "rooted-unrooted" so I decided to ditch the root since it was giving me some hassle with the security update thing and titanium was not working properly. "had to do some other stuff and I was kind of tired.
Turns out I tried to install my other official firmware I had "4.1". Sadly, upon using Odin with it, it now says that I'm trying to install an unsupported version and won't proceed... I'm stuck in here because I cannot restart by pressing up+power because it gives me an error and says I need to restart in download mode.
I was wondering if installing a fresh copy of 4.3 would fix this. Yet I've been unable to find any actual official files... yeah... I know this sounds pathetic, but... I've been herer for an hour + and have not found either a solution or the original 4.3 file or whichever file I would need for this.
Decided to turn unto this community which has helped me a lot in the past to solve all my previous issues.
So... How do I install a fresh 4.3 or how do I get out of this mess? My cell phone doesn't turn on, it just tells me the following:
Firmware Upgrade Encountered an issue. Please select recovery mode in Kies & try again.
I had 4.3 installed with all the security crap on it, so when I go to download mode and install 4.1, it says that the verison is unsopported...
Thank you all in advance.
Download Mr Robinson's 4.3 rooted ROM from here.
Flash it via ODIN and you should be good to go.
Your phone is already on 4.3 bootloader and it is not letting you downgrade to any version below it.
Hello,
I have tried upgrading my SM-P600 via odin. I have used official 5.1.1 rom . I used default odin setting as usual, but during the upgrade windows showed unrecognized device message, and odin showed failed.
If I am trying to boot in any mode (even if I am plugging in charger) I am getting "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have attached an image.
Can anyone help explaining how can I solve this (if this is possible). Also I would like to know what could cause issue like this? I have been flashing stuff to android devices many times, had boot loops and other messy things, but download mode have always worked.
Any help would be appreciated, thanks in advance.
I was able to fix this by myself. I was able to boot into download mode. I am not sure why it have started working. I just left device to fully uncharge, then charged it and download mode was accessable.
I have flashed older rom which I had P600UEUCND2_P600XARCND2_XAR and now everything fine. I will download 5.1.1 once again and will try to flash it (I did fresh windows install, because I think last time it was windows issue).
Hi i was helping my friend to update his firmware. after doing so the phone is now stuck in a weird bootloop. i had seen my fair share of bootloops but this seems weirder than others. the n7100 logo would loop very quickly (sorta like flash) and keeps doing so. can't enter recovery mode at all, only download mode. plug it to odin and whatever i can throw at it i just got nand write start fail, be it twrp, multiple versions of stock rom. im at the end of my wits, so what should i try next? thank you for any input
What is the Odin error when trying to flash the latest stock ROM from sammobile.com? Tried different USB cables and USB ports?
I kinda have/had the same problem.
N7100 logo would bootloop quiet fast (doesn't get to the point where it should load the rom).
Can't enter recovery bc of that.
Only thing that works is download mode.
After trying to flash newest stock rom (4.4.2) it failed once (I think my cable gets too old...)
Next try it worked without a problem.
Problem persists.
Next step was flashing an older repair firmware (4.1.2) but it failed (I think bc of the 4.4.2 bootloader? IDK)
Then I tried to flash the newest stock again but with the pit file. Flashed without a problem but the problem was still there.
Last step I made was to flash the newest stock with the pit file and nand erase + update bootloader.
Tried it 2 times but it failed.
Now I'm stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Download mode got a red message also: "RPMB: INVALID RPMB DATA"
I don't know what to do now. Please help.
PS: It was a "new" motherboard from aliexpess, it had a chinese version of the stock 4.1.2 if I remember right and was already rooted when I installed it. I wanted to flash the newest 4.4.2 for the new modem and stuff and then upgrade to lineage. :/