[Q] Got Stuck on Download Mode. Need Help 4.3 - T-Mobile Samsung Galaxy Note II

Hello there,
I've previously used Odin to install several versions on several phones, so at leas I know some very basics, like, using Odin and what not.
Here's my problem. I rooted my 4.3, it gave me some trouble, and the main reason I wanted it rooted was to get backups for my apps. Turns out I can back up my data with carbon "rooted-unrooted" so I decided to ditch the root since it was giving me some hassle with the security update thing and titanium was not working properly. "had to do some other stuff and I was kind of tired.
Turns out I tried to install my other official firmware I had "4.1". Sadly, upon using Odin with it, it now says that I'm trying to install an unsupported version and won't proceed... I'm stuck in here because I cannot restart by pressing up+power because it gives me an error and says I need to restart in download mode.
I was wondering if installing a fresh copy of 4.3 would fix this. Yet I've been unable to find any actual official files... yeah... I know this sounds pathetic, but... I've been herer for an hour + and have not found either a solution or the original 4.3 file or whichever file I would need for this.
Decided to turn unto this community which has helped me a lot in the past to solve all my previous issues.
So... How do I install a fresh 4.3 or how do I get out of this mess? My cell phone doesn't turn on, it just tells me the following:
Firmware Upgrade Encountered an issue. Please select recovery mode in Kies & try again.
I had 4.3 installed with all the security crap on it, so when I go to download mode and install 4.1, it says that the verison is unsopported...
Thank you all in advance.

Download Mr Robinson's 4.3 rooted ROM from here.
Flash it via ODIN and you should be good to go.
Your phone is already on 4.3 bootloader and it is not letting you downgrade to any version below it.

Related

AT&T Galaxy SIII Bricked While Trying to Flash Back to Stock... Desperate For Help

AT&T Galaxy SIII Bricked While Trying to Flash Back to Stock... Desperate For Help
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
statusnone said:
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
Click to expand...
Click to collapse
Sounds like you got a bad file re-download the AT&T software again from here http://forum.xda-developers.com/showthread.php?t=1737848 make sure you have Kies disabled i do think if its running in the background odin won't flash right don't hold me to it.and as long as you can get in download mode you should be able to fix it.also check here http://forum.xda-developers.com/showthread.php?t=1727443
statusnone said:
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
Click to expand...
Click to collapse
Hmm this actually happened to me first time I tried to root (stupid computer fell asleep mid flash) however I was just able to reenter download mode and flash again, curious though , what did the screen say and where In the flash process did the Odin fail, for Me luckily it was 2/3 of the way through flashing system so I didn't have much to worry about. Though I imagine if it was writing something important like the sbl or somethimg and it failed you might be in trouble . All in all I would say try flashing again a few times maybe the file you downloaded is bad.
bec48 said:
Sounds like you got a bad file re-download the AT&T software again from here http://forum.xda-developers.com/showthread.php?t=1737848 make sure you have Kies disabled i do think if its running in the background odin won't flash right don't hold me to it.and as long as you can get in download mode you should be able to fix it.also check here http://forum.xda-developers.com/showthread.php?t=1727443
Click to expand...
Click to collapse
Downloading the UCALEM build from that link now on my laptop (my PC is notorious for connection issues with this phone, I should of known) and I'll pray for the best. Thank you very much for the help, I'll post back once I'm on my way.
I can't even download either firmwares. The direct downloads stop for some random reason at around 33 MB and there's 0 seeders for the torrent versions. Any other way to get these firmwares? Samsung updates isn't being nice tonight.
statusnone said:
I can't even download either firmwares. The direct downloads stop for some random reason at around 33 MB and there's 0 seeders for the torrent versions. Any other way to get these firmwares? Samsung updates isn't being nice tonight.
Click to expand...
Click to collapse
The update is in Kies as well.
Finally got the update to download, used a different browser. Flashed the new build through Odin and it worked, unbricked the phone. Apparently it is the connection through my regular PC. Thanks for everyones help!

Solution (Bricked Phone) Firmware upgrade encountered an issue.

Hello everybody
Like a lot of you I download a lot of custom ROMS and every once in a while you hit a bump in a curve..
I got thrown down a hill, and long story short, I have had the MACKS ROM Allstar installed on my Sprint Note 2.
That caused a few probems, like constantly asking me to update, then I would update and reboot into recovery it WOULD NOT flash any rom, any zip file. no backups. NOTHING.
I have seen a lot of people have this issue, and when that happens as you all know DO NOT try to go back to the stock firmware sing ODIN
I did this and came up with a bricked phone that would not turn on, would not even go into recovery. Iw would just say
"Firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
I was up all night trying to unbrick my phone and fount there was really no solution to my problem but to use ODIN, yet ODIN caused this problem, so what do I do??? I kept trying. And eventually I found the solution!!!!
Enough ranting, here is how to fix your phone!!!
First you need to download the oneclick odin recovery tool. I can't create links because I am a new member, so you can just google
"SPH-L900 MA7"
and the result is right there on the top
It taked about 20 minutes to download but when it is finished you can use it just like you would use ODIN
Reboot into download mode and just click start after your device is recognized.
If you have any further questions just leave a comment or PM me, I would be glad to help!
This solution may also be used if you are having trouble flashing zip files through recovery
You may have to re install TWRP using odin though

[Q] Recovery Loop using Kingo

Hi there
I have a 900W8 note 3. I upgraded to the newest firmware via kies. it worked perfectly then i wanted to root it.
Instead of using Odin i used Kingo and now my phone is stuck on a recovery loop.
I try and access recovery up+home+ power and nothing happens it simply keeps looping
I can access download down+power+home.
any suggestions how i can get out of this?
Do download the latest version of Odin and select PDA of the recovery? and leave all other settings intact?
currently i am downloading sammobile.com firmware for my phone
Thank you!
I just noticed i posted this under note 2. i do apologize
MacProoo said:
Hi there
I have a 900W8 note 3. I upgraded to the newest firmware via kies. it worked perfectly then i wanted to root it.
Instead of using Odin i used Kingo and now my phone is stuck on a recovery loop.
I try and access recovery up+home+ power and nothing happens it simply keeps looping
I can access download down+power+home.
any suggestions how i can get out of this?
Do download the latest version of Odin and select PDA of the recovery? and leave all other settings intact?
currently i am downloading sammobile.com firmware for my phone
Thank you!
I just noticed i posted this under note 2. i do apologize
Click to expand...
Click to collapse
I got into the SAME situation with my Note 2 when i tried to use goomanager (BOOOOO!!!) to install either CWM or TWRP (cant remember which now).
I downloaded the correct stock rom for my device from sammobile and used Odin to flash it to my phone and everything came good.
God knows what happened with the goomanager business - perhaps I was supposed to make some obvious selection in goomanager like clearing caches or some damned thing - the tech geeks who put instructions together tend to miss "obvious" steps sometimes. "Make sure you're familiar with rooting etc." often means "make sure you know enough to not get screwed by steps we miss out in written instructions because to us they're obvious"...
Wobosh said:
I got into the SAME situation with my Note 2 when i tried to use goomanager (BOOOOO!!!) to install either CWM or TWRP (cant remember which now).
I downloaded the correct stock rom for my device from sammobile and used Odin to flash it to my phone and everything came good.
God knows what happened with the goomanager business - perhaps I was supposed to make some obvious selection in goomanager like clearing caches or some damned thing - the tech geeks who put instructions together tend to miss "obvious" steps sometimes. "Make sure you're familiar with rooting etc." often means "make sure you know enough to not get screwed by steps we miss out in written instructions because to us they're obvious"...
Click to expand...
Click to collapse
Seeing that boot loop gave me a heart attack. I flashed recovery and it worked.
Thank you so much!!!
NEVER USE KINGO !!!

CAN'T ROOT, goes into BootLoop

ok guys, I have successfully been able to root every device I have ever had thanks to the great work and directions of people on this site. Trust me when I say I have searched and searched for the answer to this and I can not find it.
I have a Note 10.1 2014 P605 international version. All I am trying to do is root this device. I would also like Kit Kat 4.2.2 however not required.
At this point, I am able to flash TWRP and can go back and forth from JB and KK, however I for the life of me can't flash any other thing on this device. I have tried multiple downloads of the CF Auto Root, but I get the same thing every time. I go into Odin, process starts, screen flashes, and than goes into boot loop, and stays there until i rerun Odin, and flash stock back on. I have tried to flash a custom reom on this device also but same thing.
I don't care about tripping the KNOX counter, i just want the device rooted, plane and simple. I am starting to think its not the file, but there is a block on the device somewhere and i have missed it. It seems to let me run any stock rom, just nothing else.
I have gotten Supersu but it stops when it gets to the last part and says that i just updated and need to bascly come here for help!
I'm kind of at a loss here. Not sure what to do next. Any ideas? or links that I have missed??
Afarrens said:
ok guys, I have successfully been able to root every device I have ever had thanks to the great work and directions of people on this site. Trust me when I say I have searched and searched for the answer to this and I can not find it.
I have a Note 10.1 2014 P605 international version. All I am trying to do is root this device. I would also like Kit Kat 4.2.2 however not required.
At this point, I am able to flash TWRP and can go back and forth from JB and KK, however I for the life of me can't flash any other thing on this device. I have tried multiple downloads of the CF Auto Root, but I get the same thing every time. I go into Odin, process starts, screen flashes, and than goes into boot loop, and stays there until i rerun Odin, and flash stock back on. I have tried to flash a custom reom on this device also but same thing.
I don't care about tripping the KNOX counter, i just want the device rooted, plane and simple. I am starting to think its not the file, but there is a block on the device somewhere and i have missed it. It seems to let me run any stock rom, just nothing else.
I have gotten Supersu but it stops when it gets to the last part and says that i just updated and need to bascly come here for help!
I'm kind of at a loss here. Not sure what to do next. Any ideas? or links that I have missed??
Click to expand...
Click to collapse
If you only want root, have you tried Towelroot? I was able to root my P605V when no other method worked. The only issue I have (since I have a locked bootloader) is that I can't update my SU binaries in the ROM or via recovery (since it's stock). You likely won't have that issue since you have custom recovery and can just flash.
ok- so after another night of sleep, i was able to get this done - here's what I did -
Reflashed stock rom via ODIN
Flashed TWRP via ODIN
installed SuperSU onto simcard, installed via TWRP
SuperSU opens and tries to shut down KNOX, stalls
I reboot, rerun SuperSU, and again tries to shut down KNOX, but this time it works
I reflash Kit Kat 4.2 and repeat the process and whoop there it is...root access with stock Kit Kat.
Finally!
Hope this helps someone!
adam

[Q] Galaxy SIII SGH-I747 strange softbrick?

So This is my first time posting on any forum site for help, and i was refereed to XDA by my roommate. so what happened is a few months ago i asked my roommate to root my galaxy s3 SGH-I747, after he rooted it through odin and all seemed well, BUT we never could get the phone to recognize the root and was still unable to access any root functions. so after a few different attempts we gave up. i assumed that my roommate had removed the root (bad call) but never gave it any thought. a few days ago at&t started bugging me with a software update. i just hit ignore and it would pop up again in a few hours and the icon would never go away. so i gave in and started the update. i didnt pay the phone any attention while it "updated" but later that morning i went to turn it back on and it would get to the Samsung screen then the next screen but after that it goes black and vibrates. i showed it to my roommate and he informed me that it was never restored back to official frimware like i had previously assumed. and that it never should have received the update bc it was still on a custom frimware. we tried flashing the stock frimware back on the phone and every time it would fail the nand write. i believe it was updated to 4.4.2 before i received the update from AT&T and we tried many different ways too restore it i even tried the recovery in Kies 3 but all it says is "connecting" then connection failed. so far nothing has worked. i believe that the update contained android 5.0 and maybe that is the reason none of the other ways we tried worked. i have been researching for hours trying to find a similar case but nothing matches, and i cant find a single working solution that doesn't involve possible making it worse. i can access both the recovery and download modes. please any information or help would be greatly appreciated.
Flash a custom recovery such as Philz Touch via Odin, install cm10.2 via your custom recovery. This should get the phone booted so you can determine the bootloader version on your phone. The NAND error is due to the fact that you are trying to downgrade the bootloader in Odin. Don't flash anything with Odin until you determine the bootloader. Doing so could hard brick your phone.
audit13 said:
Flash a custom recovery such as Philz Touch via Odin, install cm10.2 via your custom recovery. This should get the phone booted so you can determine the bootloader version on your phone. The NAND error is due to the fact that you are trying to downgrade the bootloader in Odin. Don't flash anything with Odin until you determine the bootloader. Doing so could hard brick your phone.
Click to expand...
Click to collapse
firstly, thanks for the fast help. i did as you advised and flashed philz touch 6.15.4 which is the latest version from what i understand. that worked flawlessly. the problem now, is with cm10.2 every time ive tried to install it i get an error in /storage/sdcard1/cm-10.2.0-d2att.zip.
im sure im doing everything correctly. any ideas?
Try flashing an older CM11 ROM for the d2lte.
audit13 said:
Try flashing an older CM11 ROM for the d2lte.
Click to expand...
Click to collapse
thanks so much man youve been a big help that worked.

Categories

Resources