Hi all,
so im coming here to ask you for a help.
Yesterday i have read about samsung pushing deactivating update for our notes 7, i have panicked and immediately started with installing TWRP, HydraRom and root to block incoming updates.
But, as i have already found out, my skills with android and flashing are already gone. So i have installed twrp, then rom and tried to reboot but phone was showing a lot of error messages and notification about low memory, which is weird. After couple of hours of seeking i have found out, that i should try to fix /data and /storage in TWRP by converting from EXT4 to ExFat... So i tried it, but phone suddenly died when it was repartitioning and now im stuck with note which is unable to boot or go to recovery. I can get into download mode yet when i try to flash anythin (whole rom, just bl, TWRP) odin shows immediately FAIL!
Does anyone know if there is way how to fix my note 7? I was thinking maybe a PIT file would help, but im unable to find one...
EDIT: Tried methods found here http://forum.xda-developers.com/note-7/how-to/fix-samsung-note-7-snapdragon-exynos-sm-t3443753 but no luck, same story with smartswitch as Odin, flash begins but immediately fails and note comes out of download mode.
So I have made decision, that I will add bounty - 50 bucks (will pay through PayPal) to anyone who will find way how to make my note work!
You should return your Note 7 to Samsung. Its safer and if want to do trial and error. I've found it possible to rescue any phone as long as you can put it in download mode ?
Sent from my SM-N930F using XDA-Developers mobile app
I know i should return it, but i really want to keep it atleast as a second phone, anyone has a solution please ?
Before trying to install twrp and custom Rom what firmware were you on? If I were you I'd download the stock firmware from Samsung site open Odin and put phone into download mode I'm sure that will work.
I was on the newest one, with green battery indicator. I have already tried flashing official rom downloaded from sammobile, but odin always only states fail! After a second, meanwhile phone leaves the download mode and gets stuck on bootloop.
When I try to entry recovery phone gets stuck on TWRP screen but doesn't actually start TWRP.
I will send 50 bucks through PayPal to first of you guys, who will lead me to the successful repair of my note!
Related
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
titostats said:
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
Click to expand...
Click to collapse
Download the latest kies from the samsung website.. and then open tools and then firmware update and initialization.. pull out the battery and type the model number and serial number kies asks.. follow the instructions.. your phone will be fine..
Sent from my GT-N7100
titostats said:
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
Click to expand...
Click to collapse
Try flashing a recovery for ur device with Odin, not a ROM, just flash twrp recovery with Odin, after u flash the recovery u will be able to access recovery and flash a stock ROM through twrp. I think what happened to u is when u flashed the update it tried to right over the unlocked bootloader which caused the soft brick, try flashing the recovery for ur device and if that doesn't work try the above posters way...
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hello guys
I just want to say i'm no where near an expert on this, and i feel i have tried to fix this issue but made it way worse in the process so please be gentle.
This morning i woke to my Samsung Note 2 N7100 just hanging on the samsung start up screen. Tried all the normal things, taking bat out, restarting many times etc. No luck, just kept hitting the samsung screen and freezing.
After some goggling i found my way to the Recovery screen (power+vol up+home) but when it was loading there was a lot of Red Error messages. It loaded the options screen and i tried to do a factory reset. A lot more error messages to basically then say failed. Tired it a few times and even tried to clear the cache but kept failing.
So i tried loading it into Kies, which didn't connect to the phone so i couldn't reinstall the software.
So i decided maybe i need to flash the phone. I downloaded a stock Rom for the phone (i was on Kitkat so found that version) Used odin and half way through the install it came up failed.
Since then the phone only displays the "Fireware upgrade encountered an issue. Please select recovery mode in Kies"
So i went back to Kies but still couldn't find the phone. It also won't let me go back into recovery mode, only into download mode.
I thought maybe i'd give the flashing another go but this time when i flashed it, it just hangs trying to find Pit but eventually fails saying no Pit.
From research it appears that the partition is buggered. All the research i've done seems to say stay away from messing with the partition. some people say its Emmc thats gone and its game over but others say there is hope still.
I can still access the Download menu and the product name is still GTn7100, Binary still samsung official so i am holding out hope there is some life left in it. I'm on my last legs now so open to all offers for solutions. Please assist if you can
Thank you in advance
Andy
If you're able to get in download mode.. Maybe try flashing a custom recovery (TWRP) which you could try full format in it then install a ROM using it.. Also, maybe trying to use a CM based one? Though you might need a external SD card to move files from PC to your phone.
I don't know if this would work, but try it.
Sent from my Galaxy Note II using Tapatalk
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
+1 on that, I'm stuck in an exact same situation. No help from Samsung either. After rooting with Kingroot my tab started acting like crazy with flickering screen and random reboots, did exactly like you did.
There are many with similar issue and as per my research most of them have given up. Getting a system image dump from a rooted tab running 4.4.2 might be the only way out. Unless of course Samsung/AT&T decides to release full odin flashable image.
I was in a similar situation from trying to fix a eff problem and took my sgh-i467 to a Samsung Experience Center located in many Best Buys and they fixed it free of charge. They were not able to fix my issue with a corrupted EFF file that is keeping my 4G from working though as I had hoped. If you have a Best Buy around with the Samsung Kiosk in it I would give it a try. I ended up trying a few different ones to fix the eff issue and some of the employees at the Samsung centers were about as smart as a head of cabbage (they laughed at me when I said my Note 8 was the issue and said "you can't have a Note 8 the Note 5 just came out") but some were at least helpful and listened when I told them they have the tools to fix my tab (reflash it back to life) and they did. Hopefully they can help you.
man Im in the same exact situation.. And I cant seem to find any help anywhere. I cant locate a stock 4.4.2 kit kat odin flashable file anywhere for the n5120
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
please help me i need de 4 files repair from this tablet
Try the forum thread started by djjiz, https://forum.xda-developers.com/galaxy-note-8-0/help/i467-4-4-2-t3537302... He posted the files and yes I was able to bring back my previously bricked AT&T Note 8.
Hi All,
Sorry for my English, it's not my language.
I need your help because I think I have bricked my Note 7 after trying to install the last Hydra rom 1.3.5.
I explain you the situation:
I have installed custom TWRP => it was good
Then I have rooted with superU => it was good
Then I have tried to install hydra rom => the installation was OK
The phone reboot at the end of installation => phone stay on start screen "Hydra rom" and reboot (loop infinite)
I cannot power OFF the phone.
I cannot go to the recovery menu.
I can only go to the download mode.
So I have tried to re-install TWRP with ODIN but it was not working. Ondin detects my phone and when I click on start, I have the message "Fail" on ODIN and the phone reboot.
Do you have any ideas to help me?
Thanks.
Note 7 Problem - please help if you can, please
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.
What I did to make this work:
1 install TWRP
2 whipe format data "yes" x3
3 advanced format everything except external storage
4 reboot to download mode
5 open Odin on pc flash BL/CP provided in original Post of HydraRom
6 install HydraRom via TWRP
7 follow direction installation process
8 wait 5 mins boom!
Never fails for me.
I did that. I have already did that several time before. But I think I have understood the problem. My BL file is corrupt (may be during the download from the server)!
So I think the boot loader not working correctly! I have tried to reload one but without success. Directly Odin write "FAIL"...
Able to access Download mode only after Hydra flash. Solution?
Did this issue ever get a solution? I am having the same issue. I can enter into download mode only after the attempted hydra flash. Now it's stuck on "Hydra N7" boot screen. I had N930F flashed and running with twrp. When I attempted hydra I believe that the full rom did not flash, only 40 MB or so. To make matters worse I can't find where I jotted down my baseband, etc. It was originally N930X (live demo model). Now I get fails in odin. What can I do to remedy my situation. I read that I should flash BPH6 base files, but here it says AGO or AG2 BL. Which is it? How do I wipe the cache and data since I can only access Odin mode? I believe my BL is corrupted. Please help. I was going to trade my Note 7 in but my imei is all zeros and the boot loop. I'm not sure that they will refund or exchange in this condition. Although, they should since I doubt Samsung wants the liability of having these devices out there. Any thoughts on the matter?
Any insight and guidance is greatly appreciated!
Grace Downed in Denver
https://forum.xda-developers.com/note-7/help/note-7-error-t3562629
i have the same issue.. hoping someone would help us.
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Hyldran0 said:
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Click to expand...
Click to collapse
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
xdausernl said:
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
Click to expand...
Click to collapse
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Hyldran0 said:
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Click to expand...
Click to collapse
It is quite easy to turn the device off, for that to happen you have to press and hold the on/off button. You'll see that the device will shutdown and try to reboot and then finally shuts down again and stay off, then release the on/off button.
Are you sure trying to flash the correct firmware with correct changes, etc??
Please share with us the device and Android version, as well as the stock ROM version with changes you're trying to flash.
Put (copy and paste) the output of Odin below.
Another way to get the firmware flashed is by using Heimdall, but for that to happen you first need to rename the extension of the stock ROM (remove .md5 and leave .tar) and than extract all seperate pieces that are contained within the stock ROM.
All those extracted pieces from the stock ROM you have to upload seperately onto Heimdall and try to flash them to your tablet, one by one.
Heimdall you'll find 'here' or use FWUL instead which has Heimdall pre installed, download is to be found 'here' and install it on a USB medium a stick, to put FWUL onto USB, use Balena-Etcher and the download is to be found 'here'.
Micro USB cable does work, but if you're unsure, try another one and make sure using the correct drivers too.
Using Odin, make sure the tablet is recognised and 'connected' in Odin, also make sure 'repartitioning' is unchecked.
If you've used the wrong Odin version, flashing will fail!
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Hyldran0 said:
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Click to expand...
Click to collapse
You're welcome.
Hi, complete novice here, does anyone know where I can get a working Firmware for my Tab 3 v7 (SM-210)?
I have searched through various forum articles here, and tried to install with several builds but none will install. The only one that gets anywhere near is the JASBR build by gr8nole. It appears to install, but on restart, the TAB just sits on the "Samsung Tab3" start screen.
I read that I may need to flash the firmware 4.4.4 (Kit Kat), but can't find it!
The unit is not totally bricked (yet), as I can run TWRP 2.8, with which I created a backup of the original build, but when I try to restore the backup, it fails at just over 31%.
Can anyone help please?