[Q] Possible Brick N7100- please help - Galaxy Note II Q&A, Help & Troubleshooting

Hello guys
I just want to say i'm no where near an expert on this, and i feel i have tried to fix this issue but made it way worse in the process so please be gentle.
This morning i woke to my Samsung Note 2 N7100 just hanging on the samsung start up screen. Tried all the normal things, taking bat out, restarting many times etc. No luck, just kept hitting the samsung screen and freezing.
After some goggling i found my way to the Recovery screen (power+vol up+home) but when it was loading there was a lot of Red Error messages. It loaded the options screen and i tried to do a factory reset. A lot more error messages to basically then say failed. Tired it a few times and even tried to clear the cache but kept failing.
So i tried loading it into Kies, which didn't connect to the phone so i couldn't reinstall the software.
So i decided maybe i need to flash the phone. I downloaded a stock Rom for the phone (i was on Kitkat so found that version) Used odin and half way through the install it came up failed.
Since then the phone only displays the "Fireware upgrade encountered an issue. Please select recovery mode in Kies"
So i went back to Kies but still couldn't find the phone. It also won't let me go back into recovery mode, only into download mode.
I thought maybe i'd give the flashing another go but this time when i flashed it, it just hangs trying to find Pit but eventually fails saying no Pit.
From research it appears that the partition is buggered. All the research i've done seems to say stay away from messing with the partition. some people say its Emmc thats gone and its game over but others say there is hope still.
I can still access the Download menu and the product name is still GTn7100, Binary still samsung official so i am holding out hope there is some life left in it. I'm on my last legs now so open to all offers for solutions. Please assist if you can
Thank you in advance
Andy

If you're able to get in download mode.. Maybe try flashing a custom recovery (TWRP) which you could try full format in it then install a ROM using it.. Also, maybe trying to use a CM based one? Though you might need a external SD card to move files from PC to your phone.
I don't know if this would work, but try it.
Sent from my Galaxy Note II using Tapatalk

Related

Galaxy Note 2 Superbork

Where to start...
First, as a disclaimer, I may use language or terms that sound noobish. I have rooted and run custom ROMs on several devices in the past, however generally when I get a ROM I like I stick with it, so I'm not constantly tinkering. I've done my best to search and find solutions so please go easy on me.
17 days ago I was running stock 4.3 on my SGNII when the battery died. Upon charging I found I was stuck in bootloop and had a bad /efs mount. I searched and searched and spent around 15 hours trying this and that but to no avail. I finally threw my hands in the air and got ahold of Josh at mobiletechvideos and he was able to fix the efs mount issue. However, he left me in factory mode which required me to root to get out of, and once I did this I was unable to activate data on my carrier (Ting). I was so happy to have my phone "back" though that I used it like this for 4 or 5 days. I could get on wifi and I could call and send text messages. I had been off the grid so this felt like something I'd fix fully later.
Well I kept reading and found "fix" after "fix", flashed this and that and still no dice. FINALLY, last night, I found this thread: http://forum.xda-developers.com/show....php?t=2086769 which helped immensely. I was able to get TWRP flashed by unchecking the "auto-reboot" option in Odin and pulling the battery after the update took, and via TWRP I was able to install the ROM. I booted up, the device activated, I was running 4.1.2, I made and received some calls, the birds were chirping, the air was sweet...
I had struggled for so long and I had finally achieved success! Then, for seemingly no reason at all, I accepted an OTA update which bricked my Note2. Devastation.
The current state of things...
* Cannot get past the initial "Samsung Galaxy Note 2" screen
* Cannot boot into recovery
* I CAN get into dl mode,
* but, I CANNOT successfully flash anything. TWRP will flash like it took, but upon reboot I'm not able to boot into it. I'm also able to flash a ROM but it fails when it gets to sbin, and upon rebooting I'm greeted by the screen "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I try to use Kies it doesn't find the device. I've installed all of the most recent drivers and I'm running Kies as administrator. I select Tools > Emergency Firmware Recovery, THEN connect my device as instructed.
I'm at the apex of frustration. I beg thee to help!!
I have roughly the same situation. Was rooted and on an MK4 rom, battery ran down super fast yesterday and when charged, only get splash screen and slowly flashing blue light. I can get into Philz recovery but no matter what I try, no dice. Also can get into DL mode, but haven't been able to get anywhere. What the heck happened?
Well i bought another phone because of this problem of unknown baseband and 0 for everything in settings which didnt allow me to connect to sprint. Now when that happen it put me in safe mode . and i couldn't find a fix for months i ended up getting a lg g2 and let my note 2 collect dust. Well I'm using my note 2 and its up in running . my partition was messed up . if you have this issue which it sound like i can help. My phone was running fine then rebooted on its own and rebooted on safe mode with no signal
Sent from my SGH-M919 using XDA Premium 4 mobile app

Note II LTE stuck on bootloader

Hi,
This morning I woke up to see my phone seemingly booting up but after a few minutes I realised that it was stuck on the boot screen. I can only assume something hardware or software related messed up while I was sleeping and now after reading a few threads I am very scared that my phone could possibly be bricked.
First up, I updated to 4.3 from 4.1.2 about 3 weeks and it has been running fine albeit a few annoyances at the new firmware Samsung deployed. To get root I had to install philz_touch_5.11.2 recovery through ODIN and then go into my new recovery to install root through Dr Ketan's Multi Tool which seemed to work well with no problems, it was quite flawless through the whole update. But now I guess something has happened to my phone and that has changed. When I saw it was stuck, I thought that it would be possible to just reflash to stock firmware and that would fix it. It was working up until the point ODIN got "cache.img" which failed the install. Now, I exited ODIN since it didn't work and restarted my phone and tried to flash the stock 4.3 ROM again. This time, immediately I got a screen telling me that there was "no PIT partition"
(Look at the attachment for the screen, I am new so no outside links)
and now I am getting the message on my phone after restarting "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I am now downloading Kies to try this but does anyone have any suggestions or solutions?
GoonReb0rn said:
Hi,
This morning I woke up to see my phone seemingly booting up but after a few minutes I realised that it was stuck on the boot screen. I can only assume something hardware or software related messed up while I was sleeping and now after reading a few threads I am very scared that my phone could possibly be bricked.
First up, I updated to 4.3 from 4.1.2 about 3 weeks and it has been running fine albeit a few annoyances at the new firmware Samsung deployed. To get root I had to install philz_touch_5.11.2 recovery through ODIN and then go into my new recovery to install root through Dr Ketan's Multi Tool which seemed to work well with no problems, it was quite flawless through the whole update. But now I guess something has happened to my phone and that has changed. When I saw it was stuck, I thought that it would be possible to just reflash to stock firmware and that would fix it. It was working up until the point ODIN got "cache.img" which failed the install. Now, I exited ODIN since it didn't work and restarted my phone and tried to flash the stock 4.3 ROM again. This time, immediately I got a screen telling me that there was "no PIT partition"
(Look at the attachment for the screen, I am new so no outside links)
and now I am getting the message on my phone after restarting "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I am now downloading Kies to try this but does anyone have any suggestions or solutions?
Click to expand...
Click to collapse
Update: I spent the past two days trying to solve this and I'm at a standstill in progress. It seems that my phone was one that suffered SDS with a corrupt eMMC chip so I've lost both my firmware and recovery but I can still get into Download mode. It also seems like I have lost my PIT table and I am just completely unable to flash the PIT file back to the phone for some reason. Does anyone have any ideas on how I could just factory reset my phone or reinstall my partition table so that i can get a simple recovery installed? Please help
Exact same issue!
I know exactly what you are going through!
My phone did the exact same thing back in June. It downloaded the firmware update over wifi, then when it went to install, it restarted to the boot logo, and went no further. I had left it for a number of hours, so time doesn't seem to make any difference.
I've been working on it since the end of July, and haven't been able to find a solution yet.
dkinniburgh said:
I know exactly what you are going through!
My phone did the exact same thing back in June. It downloaded the firmware update over wifi, then when it went to install, it restarted to the boot logo, and went no further. I had left it for a number of hours, so time doesn't seem to make any difference.
I've been working on it since the end of July, and haven't been able to find a solution yet.
Click to expand...
Click to collapse
Yeah, it doesn't seem like time would fix it, so frustrating. Right now I am getting the glass of my Note replaced (it has a slight crack) which apparently voids my warranty when I went into my carrier to organise a replacement. After it's repaired I will take it to another store and try to get it sent off to Samsung, hopefully they are understanding about it and will honour their warranty end as I do believe it was SDS so it would be their fault for using faulty eMMC chips. The only thing I wish I could do it just start over, flash the PIT file so I can just install CWM to see if any of my files are still there. I just want some peace of mind and it seems impossible at this point. I guess it is impossible to flash a PIT when the storage chip is corrupt, sucks to lose all my messages and data, just wish I had a backup in place but it is a good learning experience for the next time I have a functioning phone.
GoonReb0rn said:
Yeah, it doesn't seem like time would fix it, so frustrating. Right now I am getting the glass of my Note replaced (it has a slight crack) which apparently voids my warranty when I went into my carrier to organise a replacement. After it's repaired I will take it to another store and try to get it sent off to Samsung, hopefully they are understanding about it and will honour their warranty end as I do believe it was SDS so it would be their fault for using faulty eMMC chips. The only thing I wish I could do it just start over, flash the PIT file so I can just install CWM to see if any of my files are still there. I just want some peace of mind and it seems impossible at this point. I guess it is impossible to flash a PIT when the storage chip is corrupt, sucks to lose all my messages and data, just wish I had a backup in place but it is a good learning experience for the next time I have a functioning phone.
Click to expand...
Click to collapse
I was lucky having most of my info already backed up. I also had just upgraded another line, so I had a new phone to work with. It just sucks having to switch everything over to a new phone, reloading all the apps etc.

Bricked Note 8 AT&T SGH-I467

I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
+1 on that, I'm stuck in an exact same situation. No help from Samsung either. After rooting with Kingroot my tab started acting like crazy with flickering screen and random reboots, did exactly like you did.
There are many with similar issue and as per my research most of them have given up. Getting a system image dump from a rooted tab running 4.4.2 might be the only way out. Unless of course Samsung/AT&T decides to release full odin flashable image.
I was in a similar situation from trying to fix a eff problem and took my sgh-i467 to a Samsung Experience Center located in many Best Buys and they fixed it free of charge. They were not able to fix my issue with a corrupted EFF file that is keeping my 4G from working though as I had hoped. If you have a Best Buy around with the Samsung Kiosk in it I would give it a try. I ended up trying a few different ones to fix the eff issue and some of the employees at the Samsung centers were about as smart as a head of cabbage (they laughed at me when I said my Note 8 was the issue and said "you can't have a Note 8 the Note 5 just came out") but some were at least helpful and listened when I told them they have the tools to fix my tab (reflash it back to life) and they did. Hopefully they can help you.
man Im in the same exact situation.. And I cant seem to find any help anywhere. I cant locate a stock 4.4.2 kit kat odin flashable file anywhere for the n5120
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
please help me i need de 4 files repair from this tablet
Try the forum thread started by djjiz, https://forum.xda-developers.com/galaxy-note-8-0/help/i467-4-4-2-t3537302... He posted the files and yes I was able to bring back my previously bricked AT&T Note 8.

Note 7 possibly bricked

Hi all,
so im coming here to ask you for a help.
Yesterday i have read about samsung pushing deactivating update for our notes 7, i have panicked and immediately started with installing TWRP, HydraRom and root to block incoming updates.
But, as i have already found out, my skills with android and flashing are already gone. So i have installed twrp, then rom and tried to reboot but phone was showing a lot of error messages and notification about low memory, which is weird. After couple of hours of seeking i have found out, that i should try to fix /data and /storage in TWRP by converting from EXT4 to ExFat... So i tried it, but phone suddenly died when it was repartitioning and now im stuck with note which is unable to boot or go to recovery. I can get into download mode yet when i try to flash anythin (whole rom, just bl, TWRP) odin shows immediately FAIL!
Does anyone know if there is way how to fix my note 7? I was thinking maybe a PIT file would help, but im unable to find one...
EDIT: Tried methods found here http://forum.xda-developers.com/note-7/how-to/fix-samsung-note-7-snapdragon-exynos-sm-t3443753 but no luck, same story with smartswitch as Odin, flash begins but immediately fails and note comes out of download mode.
So I have made decision, that I will add bounty - 50 bucks (will pay through PayPal) to anyone who will find way how to make my note work!
You should return your Note 7 to Samsung. Its safer and if want to do trial and error. I've found it possible to rescue any phone as long as you can put it in download mode ?
Sent from my SM-N930F using XDA-Developers mobile app
I know i should return it, but i really want to keep it atleast as a second phone, anyone has a solution please ?
Before trying to install twrp and custom Rom what firmware were you on? If I were you I'd download the stock firmware from Samsung site open Odin and put phone into download mode I'm sure that will work.
I was on the newest one, with green battery indicator. I have already tried flashing official rom downloaded from sammobile, but odin always only states fail! After a second, meanwhile phone leaves the download mode and gets stuck on bootloop.
When I try to entry recovery phone gets stuck on TWRP screen but doesn't actually start TWRP.
I will send 50 bucks through PayPal to first of you guys, who will lead me to the successful repair of my note!

[Samsung] Galaxy Tab 3 SM-T210 / "Firmware upgrade encountered an issue"

Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Hyldran0 said:
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Click to expand...
Click to collapse
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
xdausernl said:
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
Click to expand...
Click to collapse
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Hyldran0 said:
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Click to expand...
Click to collapse
It is quite easy to turn the device off, for that to happen you have to press and hold the on/off button. You'll see that the device will shutdown and try to reboot and then finally shuts down again and stay off, then release the on/off button.
Are you sure trying to flash the correct firmware with correct changes, etc??
Please share with us the device and Android version, as well as the stock ROM version with changes you're trying to flash.
Put (copy and paste) the output of Odin below.
Another way to get the firmware flashed is by using Heimdall, but for that to happen you first need to rename the extension of the stock ROM (remove .md5 and leave .tar) and than extract all seperate pieces that are contained within the stock ROM.
All those extracted pieces from the stock ROM you have to upload seperately onto Heimdall and try to flash them to your tablet, one by one.
Heimdall you'll find 'here' or use FWUL instead which has Heimdall pre installed, download is to be found 'here' and install it on a USB medium a stick, to put FWUL onto USB, use Balena-Etcher and the download is to be found 'here'.
Micro USB cable does work, but if you're unsure, try another one and make sure using the correct drivers too.
Using Odin, make sure the tablet is recognised and 'connected' in Odin, also make sure 'repartitioning' is unchecked.
If you've used the wrong Odin version, flashing will fail!
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Hyldran0 said:
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Click to expand...
Click to collapse
You're welcome.
Hi, complete novice here, does anyone know where I can get a working Firmware for my Tab 3 v7 (SM-210)?
I have searched through various forum articles here, and tried to install with several builds but none will install. The only one that gets anywhere near is the JASBR build by gr8nole. It appears to install, but on restart, the TAB just sits on the "Samsung Tab3" start screen.
I read that I may need to flash the firmware 4.4.4 (Kit Kat), but can't find it!
The unit is not totally bricked (yet), as I can run TWRP 2.8, with which I created a backup of the original build, but when I try to restore the backup, it fails at just over 31%.
Can anyone help please?

Categories

Resources