Related
Can someone please help? I just bought a used P3300 from ebay (a wholesaler). The phone works great, absolutely everything works except for the activesync over USB. The phone is not even seen by the computer with or without activesync. I have tried it on several computers with the same issue, yet the battery charges through the USB cable.
I even reflashed the ROM using the SD card method and still have the same issue. What might be going on here??? How can the USB data connection be not working? I've never experienced this with many different phones I've had.
thanks,
Go to Settings, Connections, USB to PC, and untick Enable advanced network functionality.
I tried that, it didn't make a difference. I also tried both Activesync 4.5 and 4.2. Still nothing. I hard reset and soft reset several times - still nothing.
What Firewall is on your PC. Could be this causing the hassle.
Have you tried using a known-working usb lead?
I had this problem also to begin with, google an application called "USBKILLER" and put this .CAB onto your memory card and load this onto the phone.
When your in the application select SERIAL and click YES and this should resolve your problem - I am not sure why this happend but my mate who has the same phone does not have this problem and can resolve it by removing the check box in USB to PC settings
hey guys.... thanks for the input. My firewall is disabled - I read the Microsoft article regarding the ports Activesync uses. But AS works with my other phones, so I know that's not the problem. Same thing with the USB cable. It works with the other phones but not this one.
nicko666, I will try that USBkiller program later tonight. Thank you for the suggestion. I'll let everyone know how it goes.
Found USBkiller Cab File Attached - good luck
I tired the USBkiller program (found it myself earlier) but it also doesn't make a difference. I tried changing the setting to SERIAL in the program and also playing with the "advanced network functionality" and activesync connection settings and it's a no-go.
Still nothing works. Do I have a broken device?
hardware problem
i had the same problem after 1 month of using my p3600 i pay 59 euro to change it because the garanty not include this problem.the service told me that it was my fault !!!!
Hello. Is your PPC detected by Windows in the manager of peripheral? It is necessary that you look at if you have a new network card named "Windows Mobile".
I had that problem. I am sorry, but I think you bought a used and not-functional phone. The problem is probably due to high power that the phone got, probably when charging it through a car-charger. You should NEVER connect the phone to a car charger and then start the car - the power can damage the USB connection. You should always first start the engine and only then connect the phone to the charger.
Anyway, I had the same problem - the USB could charge the phone, but no Active Sync connection. I sent my phone to HTC UK, and after one week I got it back with a new board (they replaced the whole inside of the phone). Free of charge.
If this is the situation with your phone - no software solution will help you.
Damn, that sounds like what's going on with my phone. How do I find out how to have it serviced? I can't find anything on the useless HTC site. Please help....
And thanks to you all for the help so far.
mattan said:
I had that problem. I am sorry, but I think you bought a used and not-functional phone. The problem is probably due to high power that the phone got, probably when charging it through a car-charger. You should NEVER connect the phone to a car charger and then start the car - the power can damage the USB connection. You should always first start the engine and only then connect the phone to the charger.
Anyway, I had the same problem - the USB could charge the phone, but no Active Sync connection. I sent my phone to HTC UK, and after one week I got it back with a new board (they replaced the whole inside of the phone). Free of charge.
If this is the situation with your phone - no software solution will help you.
Click to expand...
Click to collapse
I remember sending them mail regarding the problem, via HTC site (mail: [email protected]).
After all the solutions they suggested didn't work, they called me and asked me to send the phone to the UK (they gave me all the details and were very nice and efficient). I must say that my phone was still at warranty period.
this may sound silly, but have you tried the usb ports on the back of the computer?
for some reason, the usb headers on my motherboard don't seem to recongise the phone, i'm not sure if theres no enough power or what, i've onbly tried the cable in a laptop and that works fine...if i plug them in the front usb ports i get the error in windows 'Your device has malfunctioned, Replace the Device and Try Again' or something very simular, tried the other usb header on the board, same problem, back ports, no problem...all other usb devices work fine in all the ports!
Dear all.
I work for a company that has over 600 of the htc p3300. Some of them will work in the usb and some don't.
I have 4 at the moment, 2 of them will work with the usb and the other 2 won't........
Tries all the stuff mentioned here and nothing helps.
Can't update them because of the usb........
HTC are not a lot of help either......
stead said:
this may sound silly, but have you tried the usb ports on the back of the computer?
for some reason, the usb headers on my motherboard don't seem to recongise the phone, i'm not sure if theres no enough power or what, i've onbly tried the cable in a laptop and that works fine...if i plug them in the front usb ports i get the error in windows 'Your device has malfunctioned, Replace the Device and Try Again' or something very simular, tried the other usb header on the board, same problem, back ports, no problem...all other usb devices work fine in all the ports!
Click to expand...
Click to collapse
Hi I had been trying to sort this problem out too, and after reading about starting cars with the device on charge I thought I was doomed. But what stead suggests has just worked for me too. I was using the nearest USB on my laptop but plugin it in round the back has just got it working again. The last time it synced it was 'Repairing' the Active Sync 4.5 setup program run through. I must admit that the cable into the phone is also resting on a pen at the base of the phone- just to make sure....
Good day fine sirs and ma'ams.
I would just like to say I love my Tilt 2, and have had it for a few months now with no real problems and this is about my 4th WM phone.
As of about a month ago, I have been unable to connect or sync the device to my PC.
I have WM Device center 6.1 (the latest from the website)
I am running windows 7
I had been able to sync the phone until about a month ago.
I have unchecked the box in the USB to PC for faster data synchronization.
Essentially, when I plug the phone into the computer, it just acts as if it is connected to a charger. Nothing comes up on the phone and nothing comes up on the computer. It just charges. I have even installed and uninstalled WMDC a couple of times.
I really am at my wits end here.
My question is, is there a fix for this apart from sending the phone in? I am able to flash the phone via the microsd card, and even tried going back to the e2 rom that is as close to the ATT rom as I could find.
I did find the stock rom, but it does not come with the image file, just the ruu.exe I believe. I cannot flash roms via the USB cable either, so I am only able to change things like I said, via the microsd card.
Any help is greatly appreciated! Thanks!
And yes, I have searched, and have found many other people posting in other threads saying they have the same problem, and everyone just says to uncheck that one box, which I have done, so that is NOT the problem.
Also, I would just like to add that when I go into the windows directory and attempt to run activesync (repllog.exe) I get the following message.
(cannot communicate with the pc because of the fllowing remote networking error (Error 608)
I have seen others ask help for this question without an answer on xda-dev also.
Thanks again! If anyone has the solution here I think a lot of people will be very happy!
:-(
turn off your firewall then pug ur device in and see if that works... works for me... perhaps your firewall started blocking it for some reason... other than that good luck
I had similar things happen to me in the past. While the phone is connected, check Windows Update whether there is a new version of Sync Center. This has fixed the problem for me.
i appreciate the suggestions.
However,
I have the firewall disabled and it still does not connect.
I uninstalled and reinstalled the WMDC using the latest software directly from the website. There appears to be no updates for the program once it is installed.
Any other suggestions?
Have you tried multiple USB cables, multiple USB ports, or even multiple computers? I've had USB cables which aren't capable of data transfer, as well as USB ports on the computer go bad. You might also considering a hard reset, to ensure no software on the phone could be causing the problem. If it's truly the USB port on the device that's broken, then you're in bad shape if you want to return it to AT&T for repair. You may be able to flash the AT&T stock ROM, but you won't be able to restore the AT&T stock SPL, which they check when fixing the device, so you may very well have to fork over some money to get it fixed. Best of luck
My phone is doing this also.
Multiple PC's, multiple USB ports, multiple cables. All of which worked perfectly beforehand...
The other thing to try is Internet Sharing - when I go in there and press 'connect', then it says Check USB cable connection, connect USB to any of my PC's/laptops and it doesn't register on the phone.
This phone is really a piece of ****. I could rant on for hours about the stupid problems there are with this handset, I'm sure I'm not alone. Perhaps I expected too much.
Anyway, if anyone has any info on how to make my USB connection work I'd love them forever...!
freakygeek said:
My phone is doing this also.
Multiple PC's, multiple USB ports, multiple cables. All of which worked perfectly beforehand...
The other thing to try is Internet Sharing - when I go in there and press 'connect', then it says Check USB cable connection, connect USB to any of my PC's/laptops and it doesn't register on the phone.
This phone is really a piece of ****. I could rant on for hours about the stupid problems there are with this handset, I'm sure I'm not alone. Perhaps I expected too much.
Anyway, if anyone has any info on how to make my USB connection work I'd love them forever...!
Click to expand...
Click to collapse
Could be a faulty device...my phone connects to every computer, every time. take the phone to your provider and show them whats happening.
Also, i've had issues with the standard mini USB ( http://www.meditronik.com.pl/doc/mini/usb-kabel-mini=foto=canon.jpg ) not properly connecting/loosing connection.
Try a HTC usb it might work better: http://bestcellbuy.com/bargainsea/Pictures/HTC/OEM_Home_Charger_USB_Cable/OEM_HTC_Data_Cable_07.jpg
I've tried the HTC USB lead that shipped with my phone to no avail.
I think the device is faulty (surprise surprise). It charges from USB perfectly fine, every time.
I'll post back once I find out what Telstra say... it's obviously still under warranty but that isn't really the issue - It is just such a major PITA having to switch to a loan phone and deleting confidential business data etc from my phone before sending away for repair etc etc...
Thanks for the help though, it is appreciated.
Well, I've got my USB going again. Not sure exactly what I've done, but basically I pulled the battery out for a few minutes and replaced it, turned on and off the 'high speed' checkbox in USB Connection Settings, and it has come good.
****box phone.
Somehow mine started working again last night too. Same cable, same port and everything.
Really odd, but I'm not complaining at the moment!
It seems this problem is spreading, as i'm being terrorized by this stupid bug... This afternoon I've tried to get internet on my laptop (by connecting my phone to it), but it was just charging my phone, so I thought the cable was broken. Next I tried it at home on my desktop computer, with another cable, and it did the same (several reboots have passed).
I don't know if someone already tried it, but when you enter the bootloader, it says "Serial". Normally when you connect the USB-cable it changes to "USB" (at least with my kaiser, universal and wizard). on my phone it didn't...... can anyone check this for me??
to enter bootloader: hold volume-down-button and pres soft-reset-button.
thanks in advance!
InjecTioN said:
It seems this problem is spreading, as i'm being terrorized by this stupid bug... This afternoon I've tried to get internet on my laptop (by connecting my phone to it), but it was just charging my phone, so I thought the cable was broken. Next I tried it at home on my desktop computer, with another cable, and it did the same (several reboots have passed).
I don't know if someone already tried it, but when you enter the bootloader, it says "Serial". Normally when you connect the USB-cable it changes to "USB" (at least with my kaiser, universal and wizard). on my phone it didn't...... can anyone check this for me??
to enter bootloader: hold volume-down-button and pres soft-reset-button.
thanks in advance!
Click to expand...
Click to collapse
Verified - I cannot flash with USB.
Bright.Light said:
Verified - I cannot flash with USB.
Click to expand...
Click to collapse
thanks for your help.
I've flashed my device with the newest official from HTC, and it still doesn't connect with the usb-data (i used the "flash-from-SD" -method).
The strange thing was that it happened suddenly... i never use a headset with cable, so its almost impossible the connector is broken. Any ideas people??
btw, the device isn't SPL flashed, so i can't use other roms beside the official roms...
Same thing happened to me. No USB sync, no USB connection at all; it only charges. Thankfully I had a chance to flash to a custom ROM before this happened.
The only way I can sync my data is to use a bluetooth USB in my PC. Works quite well with my contacts, calendar, & email, but I have yet to try to transfer any large files.
The bluetooth USB I went with was ASUS USB-BT21 USB 2.0 Mini Bluetooth Dongle. It is VERY low profile, too, but I would have liked for it to come with an end cap like those USB flash drives, otherwise I have yet to find any complaints about it. The price was great and so much cheaper than spending an additional $70-$100 to get my USB port on my device fixed.
Here's my saga: No Syncing, No USB Connection
Best of luck!
Debbie
this happened to me before...when you connect your devivce to your laptop/comp, are you guys not getting the little pop up that says activesync & disc drive...??? if so jus make sure at least one of those are checked...sometimes both of the circles will be blank, thus the comp will simply charge it...
unplug the device for approx 10 sec then plug it in again, and the box should pop up again...
also...if you are tethered to your comp using the tp2's internet, your comp will not recognize your tp2's storage...
da9th_one said:
this happened to me before...when you connect your devivce to your laptop/comp, are you guys not getting the little pop up that says activesync & disc drive...??? if so jus make sure at least one of those are checked...sometimes both of the circles will be blank, thus the comp will simply charge it...
unplug the device for approx 10 sec then plug it in again, and the box should pop up again...
also...if you are tethered to your comp using the tp2's internet, your comp will not recognize your tp2's storage...
Click to expand...
Click to collapse
was the first thing I checked. thanks for your input though
InjecTioN said:
thanks for your help.
I've flashed my device with the newest official from HTC, and it still doesn't connect with the usb-data (i used the "flash-from-SD" -method).
The strange thing was that it happened suddenly... i never use a headset with cable, so its almost impossible the connector is broken. Any ideas people??
btw, the device isn't SPL flashed, so i can't use other roms beside the official roms...
Click to expand...
Click to collapse
I did not know one could flash to new ROM by use of the SD card?
Mine is de-HSPL, so now I can not select another ROM anymore. (Got the 6.1 default one again)
Bright.Light said:
I did not know one could flash to new ROM by use of the SD card?
Click to expand...
Click to collapse
I've never used the SD-Card method myself, but now will have to due to my USB port no longer working.
I've been syncing by using Bluetooth USB and just tried transferring files via Bluetooth and it worked like a charm! Smaller files were instantaneous and large files took longer (of course), but also worked fine.
I just tried copying over a RHODIMG.nbh file and that bugger worked (188MB)... Excellent!!!
I did buy a USB card reader to transfer files, just to be on the safe side, but I must say that this little Bluetooth USB that I picked up is working awesome.
Debbie
i exactly have the same problem.I guess i need to send it back
Hi everyone
For the last couple of days I've been having trouble with getting my computer to recognize my phone. When I connect it, the usual red/orange LED starts glowing, but there's no reaction from the computer. Neither does the phone show any signs of having connected. The usual "choose which connection type you want box" doesn't pop up, and there really aren't any signs of having connected, other than the charging LED.
I've tried reinstalling Windows Mobile Device Center, tried switching cables, I've checked the connection settings on the phone, but can't find any irregularities there, so I'm a bit lost here. Do you have any thoughts?
For the record, I have a Rhod100 and I'm using Win7 64-bit, as well as Ubuntu 10.04 64-bit.
Have you unchecked the faster connection?
Start > Settings > Connections > USB to PC. Uncheck the enable faster connection. My win7x64 didn't wanna connect until I did that.
By "the faster connection" you mean the Storage Card mode right? If that's what you mean, then yes, I have unchecked it.
I have chosen the ActiveSync option, and have also enabled the option to always ask which connection type I want upon connection, however the box never pops up :/
Thanks for your reply
SindreHansen said:
By "the faster connection" you mean the Storage Card mode right? If that's what you mean, then yes, I have unchecked it.
I have chosen the ActiveSync option, and have also enabled the option to always ask which connection type I want upon connection, however the box never pops up :/
Thanks for your reply
Click to expand...
Click to collapse
Activesync is the one that uses faster data sync, not storage card.
I know that the USB has a problem of going out for some people, so it could be an issue with that....have you tried to connect via bluetooth??
burtonsnow8 said:
Activesync is the one that uses faster data sync, not storage card.
I know that the USB has a problem of going out for some people, so it could be an issue with that....have you tried to connect via bluetooth??
Click to expand...
Click to collapse
If the box isn't popping up, there is a problem with the USB connection try a different cable; if that doesn't work, take a magnifying glass and examine the phone USB connector - them may be some bent pins in the connector. If so, GENTLY straighten them out.
ActiveSync is picky anyways even if you have a good usb connection. On my xp compuer, if I want to connect without doing the setup (which I usually do, if I dont then it forces a push email account onto my phone if I sync), I have to hit the connect button in the activesync window. It flashes roms flawlessly, but disconnects often while file browsing. On my dads vista pc, it browses files perfectly but I have tried everything possible but cannot flash from it using wmdc. I would definitely try it on a different computer if I were you, your computer might just be acting funny
I just had the same problem and i tried all the fancy things you people are talking about.Its a manufacturing fault and needs warranty replacement of the board.noting else will work.
SindreHansen said:
Hi everyone
For the last couple of days I've been having trouble with getting my computer to recognize my phone. When I connect it, the usual red/orange LED starts glowing, but there's no reaction from the computer. Neither does the phone show any signs of having connected. The usual "choose which connection type you want box" doesn't pop up, and there really aren't any signs of having connected, other than the charging LED.
I've tried reinstalling Windows Mobile Device Center, tried switching cables, I've checked the connection settings on the phone, but can't find any irregularities there, so I'm a bit lost here. Do you have any thoughts?
For the record, I have a Rhod100 and I'm using Win7 64-bit, as well as Ubuntu 10.04 64-bit.
Click to expand...
Click to collapse
start the phone up in bootloader mode (powering on the phone with the volume -down pushed). The tricolor screen should come up with the word "serial" in blue in the white area. Then plug in the USB connector,that will tell yuou if your port is really bad. If not it will change "serial" to "USB"
Still if you haven't flashed it then send the thing in now, HTC honors warranties based on serial numbers so you don't have to deal with tmobile, but only if your phone is NOT hardspl'd or flashed with a third party custom ROM
I had the same problem on an htc diamond. It needed to go back and have the board replaced.
The fault is caused by connecting the phone to an in car charger and then starting the engine.
Took a while to happen.
Like it says, my computer charges it but doesnt sync up with my computer. i have a touch pro 2. (tmobile version) Im trying to connect it to my computer so i can do an upgrade for the energy rom any body else have this problem?
IF so can you help me on fixing this situatioN? please!!? thanks a bunch guys
happy holidays
I know this problem to good -I guess a hardware fault. I had this with my first and now with the second TP2 too.
For my guess the USB connector-hole (or how you call it in english) is too big! If I place the TP2 in a dockings station everything is fine -sync no problem.
If I try it with only connection by cable -not a hope.
If you buy I docking station I guess the problem could be solved
I had this with my 1st Tilt 2, nothing I tried worked. I had to sync/move files via BT USB. It was inexpensive (made by ASUS) at $14 and very low profile. Believe it or not, it worked really well, even for huge RHODIMG files when I wanted to flash a new ROM. The bigger the file, the longer it took, but it *did* work.
Recently, I got a great deal on a used, mint condition, Tilt 2 with lots of accessories, including an Otterbox, for $150 shipped, and my USB syncing is working again. Definitely a better deal than the $90-$275 estimate HTC gave me to repair the USB.
Hope you get it sorted, but it's been a common problem with this phone. Seems the pins inside are really delicate.
EDIT: Hey I just noticed we all have a "thanks meters" now... Schweet!
Debbie
dang is there any other way i can fix thiss??
Just had my T-MO Vario V replaced for this very thing. As my replacement started acting up as well with the same error, I searched again on the web and found that it might also be a faulty usb cable or the fact that you connect your phone via a hub rather than directly to a mainboard port.
I use another cable now connected to a mainboard port and guess what (and keep your fingers crossed) for the moment it's working.
Good luck!
Robert
Im using a T-mobile (SIM Unlocked) TP2 from Singapore. Same thing here, when plugged to the PC via USB (the one that came with the phone) it charges but doesnt show the actual syncing with ActiveSync 4.5. I used to have an old Treo 750 that synced just fine (though TP2 definitely has a much much better PC connector than the Treo).
One thing I noticed is even though ActiveSync is not popping up for automatic syncing, It always show in the taskbar as connected. I can even navigate to my TP2 in Explorer & transfer files to & from my PC via USB. My question is, is there a way for ActiveSync window to really come up whenever I plug my TP2 in?
nelvbautista said:
. My question is, is there a way for ActiveSync window to really come up whenever I plug my TP2 in?
Click to expand...
Click to collapse
Yes it is in the device setting in active sync ...
I also tried every possible settings with Activesync options in the phone but it still doesn't show the actual ActiveSync window when I plug my TP2 via USB though it connects & via the taskbar icon & still explorable in windows explorer. I just want to have that peace of mind that I can fully back up using Activesync aside from using other 3rd party backup tools before I start playing with different ROMs out there.
first check the "usb to PC" settings in setting menu on the phone, try unchecking "enable faster data sync" see if this makes a difference .
if not then try going into your control panel on your computer, and use "add and remove programs" and remove active sync , then re-install it , also change the usb cable if you have another one laying around..something that will make a difference..
"enable faster data sync" uncheck this and it should works.
I had same problem...
Try entering bootloader mode and plug it in and see if windows detects the device if it does then try clicking on start on your PC, then right click on my computer, then click manage.
When computer management opens click on device manager then click the + to the left of usb devices.
click on each usb controller you find and press delete and uninstall each one until none are left. Then restart the pc and unplug the phone, soft reset the phone. Wait until windows restarts and AFTER it has finished installing ALL drivers for your usb controllers plug the phone back in and see if that fixes the problem.
I just thought as well, try plugging the usb lead into a different usb port, that way windows will treat the phone as a new device
I got DHD 2 days ago, first day everything worked normaly, now I can't connect the phone via USB to laptop. I don't get the dialog asking to charge, use as disk etc. I tried everything, debug mode on/off, restarted, removed SD card and back in again, I used another SD card, reboot my laptop, phone (also with turned off "fast boot"), ... I've had HTC Magic till now, no problem connecting it as disk to my Macbook, same was with this one. I think I might have disconnected the USB too fast, but I'm not sure if it was this phone or the old HTC Magic. Interesting thing is, this topped working Thursday night, but on Friday I could connect it to the same laptop using Nokia's micro-USB cable, it worked, but no way to getting it to work with supplied HTC USB cable I could use Nokia's cable, but it's in the office and HTC's cable should work, shouldn't it?
Does anyone have an idea what to do? Phone does not even set the card so laptop can recognise it as USB disk (even if I use Windows VM, phone is not detected, i I plug in Magic, it works on Mac and Windows. Would a factory reset help (how do I backup data on unrooted phone)?
And yes, I've searched this forum and tons of other things online, nothing seems to work Some say this cable is for charge only, but a) how come it worked when I first got the phone? b) USB cable is a USB cable
Don't you have to pull down the notifications bar, tap USB connected and then choose the connection type you want each time. I don't have sense ROM anymore but I'm pretty sure that is what I had to do every time I connected the phone, I don't remember the phone prompting me.
Doktaphex said:
Don't you have to pull down the notifications bar, tap USB connected and then choose the connection type you want each time. I don't have sense ROM anymore but I'm pretty sure that is what I had to do every time I connected the phone, I don't remember the phone prompting me.
Click to expand...
Click to collapse
+1..I'd say your phone is in charge only and needs to be changed as Quoted above.
Doktaphex said:
Don't you have to pull down the notifications bar, tap USB connected and then choose the connection type you want each time. I don't have sense ROM anymore but I'm pretty sure that is what I had to do every time I connected the phone, I don't remember the phone prompting me.
Click to expand...
Click to collapse
Yeah, there should be an icon in notification bar, but there isn't. I have ticked to ask me each time, I've set default connection to disk, charge only, I've set it with debug mode checked, no difference
Make sure when you connect the phone is not locked this is how I got mine to work!
Sent from my Desire HD using XDA App
Aamir.Badat said:
Make sure when you connect the phone is not locked this is how I got mine to work!
Click to expand...
Click to collapse
No difference
Have you tried rebooting and then trying again!
Sent from my Desire HD using XDA App
Aamir.Badat said:
Have you tried rebooting and then trying again!
Click to expand...
Click to collapse
Of course, many times, with and without fast boot, I rebooted laptop even.
Have you removed any apps with Titanium Backup? Rooted your DHD? Flashed any custom ROMs/Radio's/Recoveries?
The ability to connect your SD card via USB to your computer is a core function included within Android. It would not suddenly stop unless you did something.
I'm also pretty sure the check box is for it to not ask you again. Have you looked at the USB settings to clear the default you have set?
andyharney said:
Have you removed any apps with Titanium Backup? Rooted your DHD? Flashed any custom ROMs/Radio's/Recoveries?
The ability to connect your SD card via USB to your computer is a core function included within Android. It would not suddenly stop unless you did something.
I'm also pretty sure the check box is for it to not ask you again. Have you looked at the USB settings to clear the default you have set?
Click to expand...
Click to collapse
No, my phone is not rooted (yet), it has stock rom and everything. And I've never set to "never ask me again". Weird thing is that it worked for first few hours.
Now, the WEIRDEST thing is that I just got to the office and connected the phone to my (same) laptop with Nokia cable. It works like it should, to every USB port I connect it to. So my official HTC USB cable, that came with the phone does not work, charges only while Nokia's USB cable (form my old E66) works perfectly. I can use this cable, though I'm ultra curious why a HTC cable wouldn't work?!
Faulty cable or a bent pin or something. Happens from time to time. Micro usb leads are dirt cheap and readily available now anyway so no loss apart from a little tone to replace it.
Sent from my Desire HD
dr.m0x said:
Faulty cable or a bent pin or something. Happens from time to time. Micro usb leads are dirt cheap and readily available now anyway so no loss apart from a little tone to replace it.
Click to expand...
Click to collapse
Yeah. I'll test coworker's HTC USB cable tomorrow and try his Desire phone with my laptop so if my cable is faulty, I'll go to service and ask for a replacement, a cable that comes with the phone should be under warranty, right? I will post the outcome here.
Not to forget, a huge THANY YOU to all of you who tried helping me
Yep, it was faulty cable. It took them 2 WEEKS go give me a new one, but at least it works (for) now.