Recently i flashed fastboot rom on 1s. Fastboot was successful but lost both signals. Later I followed Bharat's thread to recover IMEI number, though it was successful. Sim 1 is working fine now but sim 2 is still struggling for network. Stuck on Emergency calls only.
I did with flashing multiple fastboot ROMs, Flashed through EDL. Outcome was not satisfactory. Please help me out if you have the solution. Thank you!
Related
Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
What did you do to get it to pick up a signal at all?
I've done the 8322 NV edit and tried both GSM/WCDMA and Global modes by going into *#*#4636#*#*. Phone is stuck on "Searching for Service". Even tried a few build.prop edits and using build.prop from my RAZR M. No luck there either. I've tried flashing XT907 modem, also erased modemst1 and modemst2. I also tried with and without flashing XT907's fsg. I don't know what fsg is, but the FXZ always flashes modem, fsg, then erases modemst1 and modemst2. No luck there either. Can't even turn on the radio with the modem FW from XT907.
The fact you managed to get it to show a signal bar at all is further than I got.
adbshellsu said:
Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
Click to expand...
Click to collapse
Macau ChinaTelecom Mcc Mnc 45502 also have this issue, can't use 3G and 1X .
flash aussie radio
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
mtchby said:
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
Click to expand...
Click to collapse
Can anyone verify this?
Sent from Lenovo Erazer Z500 @ AOSP Android 4.4.2
https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1
Unknown vintage.
help
aviwdoowks said:
[]https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1[/url]
Unknown vintage.
Click to expand...
Click to collapse
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
mtchby said:
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
Click to expand...
Click to collapse
fastboot flash modem NON-HLOS.bin
I also did:
fastboot erase modemst1
fastboot erase modemst2
Because that's what the fxz does.
Didn't work for me though. No signal, can't do *#*#4636#*#*, can't get into Status in About Phone, can't get into Mobile networks in Wireless & networks, Baseband version says UNKNOWN. Maybe I got a bad download? It did seem unusually fast. My MD5 sum is C3F9B3BAD2D5454C4E6D6F7803136567.
UPDATE: Downloaded official Aussie FXZ and flashed modem_signed. Same thing. Either there's more to it, or guy that suggested it is trolling.
I found it in an old tmobile hack thread I think.
Hello guys I was trying to root my Lg G pro E980 for AT&T. In my haste and eagerness to attain root on my device, I failed to notice some of the warnings in the OP. This is what I used to try to obtain root: http://forum.xda-developers.com/showthread.php?t=2362657 As you can see, it states that it does not work on AT&T 10p. After trying (and failing). My phone would no longer detect my sim card! I tried factory resetting with no luck. I also tried taking the sim card out and restarting without the sim and then reboot with the sim. This did not work either. Searching for networks yielded a network error. If it matters, my phone is unlocked and using a T mobile sim. I was working perfectly before the failed root attempt and now I get no service connectivity at all! Any assistance would be greatly appreciated!
Update: I flashed the phone to an earlier stock version of the AT&T rom using this: http://forum.xda-developers.com/showthread.php?t=2302660 and it still does not seem to read my T-mobile sim or an AT&T sim either! Please, any help at all is appreciated!
shrilzer said:
Update: I flashed the phone to an earlier stock version of the AT&T rom using this: http://forum.xda-developers.com/showthread.php?t=2302660 and it still does not seem to read my T-mobile sim or an AT&T sim either! Please, any help at all is appreciated!
Click to expand...
Click to collapse
Have you still got an IMEI number? If you haven't that is why your phone cannot read the sim. If you don't have an IMEI, it is because your EFS has been corrupted but that shouldn't happen when rooting. If you have an EFS backup flash that, otherwise you have to take it to a service centre as there is no way to write an IMEI number onto your phone.
Hi everyone,
I've been having issues with receiving calls and based on another thread for the HTC 10 decided to wipe modemst1 and modemst2 to try to figure it out. After wiping them my phone no longer detected the sim card. I ran a RUU which didn't resolve the issue. I'm using a Sprint HTC 10, unlocked bootloader, S-off. So far my process has been:
1. S-off.
2. fastboot erase modemst1 and 2 from bootloader.
3. Reboot to Viper, no SIM detected.
4. Factory reset Viper, no SIM detected.
5. RUU with latest Sprint RUU, reboot, no SIM detected.
Any thoughts on my next steps? If it matters I'm running the RUU with the zip on my SD card.
I'm not sure how to mark this as resolved, but I got past this part. I flashed to LeeDroid, it popped up and told me simlock was enabled. Apparently in what I was doing I lost my sim unlock. I re-performed the NV method of sim unlock and have signal again. It still hasn't resolved my issue with not receiving phone calls, but at least I'm back to where I started.
I just flash MM stock firmware
Then i can't hear any voice call
That's why i search on youtube there say
Fastboot erase modmst1
Fastbo erase modmst2
i follow that command in adb
And after i gone my sim Still not detecting sim or network
Then i flash twrp backup but same issue..
Help me guyz
What should i do..?
Help me??????
I had same issue and make it work using backup from another working P2. See post #70 and later from here:
https://forum.xda-developers.com/lenovo-p2/help/stock-rom-t3552973/page7
Hello,
I have a problem with my Z2 Force TMO US version. I live in Poland. I bought the phone on the internet and it was TMO simlocked. I did the temporary unlock to check if it is working. Then I wanted to flash custom rom (DU in this case) and my problems has begun.
1. After first attempt of unlocking boot I got it unlocked but couldn't flash any custom rom. I figured out it is TWRP problem (flashed 3.2.2-2 not 3.2.1.1).
2. Flashed TWRP 3.2.1-1 and I was able to flash custom rom.
3. After flashing custom rom I lost phone signal: I'm getting no service and zero signal bar. I checked *#*#4636#*#* and noticed that I have radio off. I had IMEI and BASEBAND then.
4. I tried many other roms to get my signal back but no success.
5. I flashed stock TMO and was able to unlock simlock temporary again but it has no service and signal again. Radio is off.
6. Today I tried flashing stock OREO OCX27.109-36 with locking bootloader now I'm stuck.
I have locked bootloader and no baseband which means I don't have any signal or WIFI (mac is 0). I can't connect to google account so I can't get oem unlocking option - it's greyed out.
Can somebody help me with enabling OEM unlock? Or even better can somebody help me with getting signal back?
Thanks in advance for reply.
Try flashing the newest TMO firmware, which is the only thing you can flash with a locked bootloader. Check post #2 of the return to stock thread for the flashall utilities and the TMO flashall. The latest firmware provided for TMO is ocx27.109-51-7
You can do it
, I already had this issue with my moto z2 force in Morocco , so what I did is I connected the phone to internet via bluetooth and when I added my google accounte the unlocking oem in dev option was normal , so I was able to flash roms again . Hope this will help you.
Use pdanet app, you need two Android devices. Connect using Bluetooth...
Thank you guys. BT tethering helped. Thread can be closed.
How did you connect to Bluetooth to get through first start up? I can't get to Bluetooth settings to pair. I have this issue currently...