Hi everyone,
I've been having issues with receiving calls and based on another thread for the HTC 10 decided to wipe modemst1 and modemst2 to try to figure it out. After wiping them my phone no longer detected the sim card. I ran a RUU which didn't resolve the issue. I'm using a Sprint HTC 10, unlocked bootloader, S-off. So far my process has been:
1. S-off.
2. fastboot erase modemst1 and 2 from bootloader.
3. Reboot to Viper, no SIM detected.
4. Factory reset Viper, no SIM detected.
5. RUU with latest Sprint RUU, reboot, no SIM detected.
Any thoughts on my next steps? If it matters I'm running the RUU with the zip on my SD card.
I'm not sure how to mark this as resolved, but I got past this part. I flashed to LeeDroid, it popped up and told me simlock was enabled. Apparently in what I was doing I lost my sim unlock. I re-performed the NV method of sim unlock and have signal again. It still hasn't resolved my issue with not receiving phone calls, but at least I'm back to where I started.
Related
Hi guys, I'm trying to network unlock my M8 to use in Germany. I've inserted the card and typed in the network unlock code that I bought. Unfortunately, it is hanging on "Requesting network unlock'
I have tried factory resetting the phone.
What can I do?
Thank you
Are you stock, which carrier?
AT&T Skydragon rom
Try stock rom if you can see if that helps. Do a backup of your current rom, flash stock then restore backup
I'd suggest go back to complete stock also.
thanks, going back to complete stock worked. However my SIM card is locked every time I turn on the phone.
What do you mean your SIM card is locked? Do you mean you have to enter a pin to unlock the screen?
Network unlock requested?
Hi man,
I have the same problem.... Canadian Htc One m8 google play edition locked to Bell... I have rooted and unlocked bootloader... unable to s-off...
tried to sim unlock my device and after inserting another sim and unlock code it just hangs on the screen saying " network unlock requested...
Tried everything and nothing helps....
maybe some developers here can figure it our...
Hi all, I've been battling this problem for days now. Airplanr mode is stuck 'Turning off...' and wont connect to my mobile carrier. Things I've tried:
Restarting phone with and without SIM inserted
Factory reset from settings
Factory reset from recovery mode
Flashed to the same build twice using the flash from SD card method (build 3.36.709.3)
Turned airplane mode on and off with wifi/mobile data/NFC turned on or off
I have no idea what to do next. I doubt it's a hardware problem as the phone detects the sim card when I put it in and asks if it's O2 pay and go or pay monthly, so it can even read it, it's just the phone wont come out of airplane mode.
I am on holiday without a PC but feel free to post ideas that requires one. Device is currently S-on and unrooted. I would rather not root or s-off the device just yet, and would rather stay on stock ROM as it's still in warranty. Problem is, it's in the UK and the warranty is held in Taiwan, which means sending it internationally to get it fixed. It's also a problem as there is a language barrier between me and their support for phone calls and their live chat button appears to always be greyed out.
Edit: I found this for the M8 which I think is in the right direction:
"Even I started thinking same way but it wasn't hardware issue.
I used ##786# to reset the phone completly (it did asked me my MSL/SPC) and everything was wiped from the phone. ( I am sure this reset is different from normal factory reset)
now my phone is up and I can toggle Airplane Mode On & Off however now there is another thing which I came accross
1. No roaming option or extended options in "Mobile Data" option under Wireless & Settings
2. No Network Sharing option
Even tried after running RUU_M8_WHL_K44_SENSE60_SPCS_MR_Sprint_WWE_Harman_2 .16.654.4_R2_Radio_1.08.20.0612_4_NV_SPCS_1.52_003 _release_384670_signed_2"
How do I do this with the M9? aLogcat comes back with no MSL so I need a free unrooted way to get that, and that # code doesn't do anything on the M9 either!
Edit2: Tried*#*#4636#*#*
Option is there to turn on the radio, but pressing it does nothing. Changing preffered network type does nothing either (I select any option from the drop down and the original choice remains). SIM is with O2. Currently set to GSM/WCDMA/LTE
Please help -_-
damn you really tried an m8 RUU on M9? please don't be stupid! it will never work lol. is your phone unlocked, so you could flash twrp recovery? otherwise you need to find a RUU matching your mainversion/CID. but this time not from m8 lol
DeeZZ_NuuZZ said:
damn you really tried an m8 RUU on M9? please don't be stupid! it will never work lol. is your phone unlocked, so you could flash twrp recovery? otherwise you need to find a RUU matching your mainversion/CID. but this time not from m8 lol
Click to expand...
Click to collapse
The M8 RUU was a quote from someone having the same issue on their M8. Sorry if that wasn't very clear. I am running a fresh M9 latest RUU, I'm not dumb enough to put an M8 RUU on it and the stock flash utility (download mode) isn't either.
I still haven't found a solution to this. Can anyone help?
tried in *#*#4636#*#* on the menu button the frequency option? if you are fully stock, ask HTC, if they have no other fix, send it for warranty
I've tried everything in that screen. Here is what I have also tried today:
Bootloader unlocked
Custom recovery installed
Rooted
Model number and CID changed to developer model
Developer rom installed (android lollipop) same problem
Latest developer edition firmware installed
ViperOne 4.3 installed, same problem
Cryno... Something... I forget the name, but another custom rom installed, same problem.
It's fair to say that the problem is probably hardware related. The SIM card is detected, but the radio willnot turn on. In this instance, what is the most likely hardware cause? Is it worth replacing the sim card reader or is it more likely to be a chipset issue? I would be happier replacing the sim reader if the sim was not detected at all.
Btw, all the custom software stuff was done because HTC Taiwan said they wouldn't touch it. According to them it's out of warranty even though UK support say it's in warranty with the taiwan support centre.
Hello XDA Users,
I currently need some serious help, as I seem to have made a mistake with flashing a radio to my device.
I have a Verizon branded HTC M8, currently unlocked and using it with T-Mobile.
Today, I flashed a AT&T radio since I read that it helps with data dropping because it utilizes more bands.
Once I flashed the new radio, my phone will not detect my sim card.
I can't even select a network operator, nor enter any APN settings.
I did not make a NAndroid Backup of my device, so I can't resort to a back up.
I tried flashing several other radios, but not my luck none have worked.
My current device setup is as follows..
Device - Verizon HTC One M8 / Unlocked (T-Mobile)
Rom - ViperOneM8 6.1.0
Kernel - ElementalX
CID - 11111111 / S-OFF
Can someone please explain to me what went wrong, or how I can get my Sim card to reactivate.
I've tried two different sim cards, and a few online tricks none have which worked. (Tape / Trimming SIM)
This can be closed, I have solved my problem.
Updating to the latest firmware can be a lifesaver
Recently i flashed fastboot rom on 1s. Fastboot was successful but lost both signals. Later I followed Bharat's thread to recover IMEI number, though it was successful. Sim 1 is working fine now but sim 2 is still struggling for network. Stuck on Emergency calls only.
I did with flashing multiple fastboot ROMs, Flashed through EDL. Outcome was not satisfactory. Please help me out if you have the solution. Thank you!
Hi,
for two days I get a OTA update for copperhead. After the Installation I cannot unlock my sim card. I always get a error.
I changed the sim tested it with others phones there it works.
I tried to install lineage, but there it didn't works too.
So i installed the factory image from here
https://developers.google.com/android/images
But no chance, the phone could not unlock the sim card.
So my question what could I do to fix it?
Is there a special Firmware for that ?
Thanks