Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
What did you do to get it to pick up a signal at all?
I've done the 8322 NV edit and tried both GSM/WCDMA and Global modes by going into *#*#4636#*#*. Phone is stuck on "Searching for Service". Even tried a few build.prop edits and using build.prop from my RAZR M. No luck there either. I've tried flashing XT907 modem, also erased modemst1 and modemst2. I also tried with and without flashing XT907's fsg. I don't know what fsg is, but the FXZ always flashes modem, fsg, then erases modemst1 and modemst2. No luck there either. Can't even turn on the radio with the modem FW from XT907.
The fact you managed to get it to show a signal bar at all is further than I got.
adbshellsu said:
Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
Click to expand...
Click to collapse
Macau ChinaTelecom Mcc Mnc 45502 also have this issue, can't use 3G and 1X .
flash aussie radio
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
mtchby said:
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
Click to expand...
Click to collapse
Can anyone verify this?
Sent from Lenovo Erazer Z500 @ AOSP Android 4.4.2
https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1
Unknown vintage.
help
aviwdoowks said:
[]https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1[/url]
Unknown vintage.
Click to expand...
Click to collapse
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
mtchby said:
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
Click to expand...
Click to collapse
fastboot flash modem NON-HLOS.bin
I also did:
fastboot erase modemst1
fastboot erase modemst2
Because that's what the fxz does.
Didn't work for me though. No signal, can't do *#*#4636#*#*, can't get into Status in About Phone, can't get into Mobile networks in Wireless & networks, Baseband version says UNKNOWN. Maybe I got a bad download? It did seem unusually fast. My MD5 sum is C3F9B3BAD2D5454C4E6D6F7803136567.
UPDATE: Downloaded official Aussie FXZ and flashed modem_signed. Same thing. Either there's more to it, or guy that suggested it is trolling.
I found it in an old tmobile hack thread I think.
Related
Hi,
Now I'm S-OFF and rooted.
However I'm still having problems with signal reception on the wildfire s
Doesnt seem to work well in weak signal areas. Not half as well as my x10 mini pro.
The o2 sim definitely works in the phone as I've used it this week at home just at work its
Any suggestions settings etc I can change?
Data connection seems to work everywhere just phone signa
after messing around with the phone a bit I've found I cant connect to GSM networks using my o2 SIM.
This is after using the XTC clip and flashing an unbranded ROM
I've got a feeling this has something to do with a failed unlock attempt while it was on T-Mobile.
Something wrong
dunno if this may help but try to change the preferred network type from the *#*#4636#*#* hidden menu
Might sound a bit simple but have you tried wiping the contacts on the sim with a cloth?
I used to work for O2 technical and this seemed to fix a lot of seemingly network related issues.
I had o2 send me out a new sim last week so its not the sim.
The phone performs great where I live which has a really strong HSDPA signal.
The odd thing is my old x10 mini pro never had these problems.
from the test menu(*#*#4636#*#*) if I select GSM only I get no connection at all.
Its like it wont connect at lower speed.
it seems a bit like this problem http://forum.xda-developers.com/showthread.php?t=805024
Sometimes all my signal drops while my mums x10 mini pro which is also on o2 has full signal. After a few mins it comes back, but sometimes I get full signal and then other times I get about 2 bars. Pretty strange.
Could be a deathgrip problem on WFS?? has anyone reported this on other threads mayb?
ravijokhun said:
Could be a deathgrip problem on WFS?? has anyone reported this on other threads mayb?
Click to expand...
Click to collapse
Its happening to my phone when I move it about on my desk.
I've had a few instances of dropped calls too now
Might have to get rid
l00k said:
Its happening to my phone when I move it about on my desk.
I've had a few instances of dropped calls too now
Might have to get rid
Click to expand...
Click to collapse
No idea..i have some network problems too but mainly in places where signal is usually bad.. i had the same problem with my nokia in same place before.
I'm going to try doing some experiments today with other peoples SIM cards see if its a phone issue or a network issue.
I'll be gutted if its the phone after waiting so long for S-OFF. Really like the form factor of the handset its perfect.
Baseband
47.10.35.3029H_7.46.35.08
Build
1.33.401.2 CL44680 release-keys
If anyone else is on o2 and not having signal problems can you let me know your baseband and build numbers. I'll try changing ROMS
Update
I've tried the following SIMs with the following results
o2 = no signal (data OK)
Orange = no signal (data OK)
Vodafone = no Signal (data OK)
T-Mobile = fine 3g and HSDPA
These are SIM cards from people in my office that get full beam on their phones.
I think my phone is still somehow locked to T-Mobile kind of partially unlocked somehow.
WTF! thought that XTC Clip was meant to factory unlock it
l00k said:
Update
I've tried the following SIMs with the following results
o2 = no signal (data OK)
Orange = no signal (data OK)
Vodafone = no Signal (data OK)
T-Mobile = fine 3g and HSDPA
These are SIM cards from people in my office that get full beam on their phones.
I think my phone is still somehow locked to T-Mobile kind of partially unlocked somehow.
WTF! thought that XTC Clip was meant to factory unlock it
Click to expand...
Click to collapse
I don't think it'll be locked still as you wouldn't get any signal on anything other than tmo.
I'm no expert but it does sound like an issue with the rom.
Have you tried wipe - re-flash - wipe?
funkychunky said:
I don't think it'll be locked still as you wouldn't get any signal on anything other than tmo.
I'm no expert but it does sound like an issue with the rom.
Have you tried wipe - re-flash - wipe?
Click to expand...
Click to collapse
I've used RUU roms and wildspirit. They had the same issue.
Could I flash a rom from the bootloader by renaming it on the SD?
(again, no expert) I don't think you can flash custom roms from recovery using stock recovery.
You can flash stock roms though
renamed a rom to PG76IMG.zip and copied it to my sim
in bootloader you get a bit more info.
I'm wondering what the radio versions are in the pics below
[8] RADIO_V2
[9] RADIO_CUST
after the first bit was done it rebooted and came back and did the second
[7] RADIO_CUST
I think the radio v2 relates to the radio file in the rom and the radio cust to rcdata?
I've just opened the rcdata in the stock rom with a hex editor and it contains:
QCT_UMTS_RADIO_VER=1.DisH=1.HSDPACat=8.QCT_UMTS_RADIO_END=1.
Don't know if that relates to anything...
How's it going so far?
Flashed the stock HTC through the bootloader with the same results
I'm definitely unlocked as this abd command shows I have supercid
D:\android-sdk-windows\tools>adb shell
$ getprop ro.cid
getprop ro.cid
11111111
I've got a feeling that t-mobile use a custom radio which is buried somewhere in the phone which overrides the stock radio.
Just wondering if there is a way to include a custom radio img file in the PG76IMG.zip which would be flashed over the tmobile one.
My signal seems to always drop when I put my phone on my laptop when I'm using it. Once I move it away the signal comes back.
Here are a couple of zipped logcat extracts for radio
radio_output1-o2-WCDMA.txt
radio_output2-o2-GSM.txt
One when I was connected to o2 with WCDMA preferred selected in settings. The second is where I changed settings to GSM only where you will see connection drop.
+CME ERROR: 30 at the end refers to CME ERROR: 30 No network service found that out here http://www.smssolutions.net/tutorials/gsm/gsmerrorcodes/
If anyone wants to play grab the android sdk or just get adb from somewhere and run the following with usb debugging enabled
adb logcat -b radio>outputfile.txt
I finally got my internet sharing and MMS working on my unlocked Rogers Lumia 900 running on Bell. Earlier this week, I came across this page. http://forums.wpcentral.com/lumia-900/197920.htm. If you follow his instructions (minus the unplugging the cable during the rom flashing), you should have working internet sharing and MMS without having to input any APN settings. The first time I started it with the TelCel rom, I still had to input my APN to get data to work. Then I performed a hard reset by holding volume down, power, and camera buttons. After that, it picked up the correct settings from the sim card and everything works as it's supposed to. The only downside to some people is that now instead of showing "LTE" in the status bar, it shows "4G" and instead of "4G" when you are on the HSPA network, it shows an "H". I think this is a truer representation of the network you are on anyways since HSPA isn't a true 4G network like the American companies would have us believe.
Please note that if you are going to do this, you will lose any unsynced data on your phone and will also have to reinstall all your apps so backup what you need to.
deleted
Seems interesting. I will wait for the 7.8 version to come out. I wouldn't want my phone to be stuck at 7.5 for some reason after trying this.
pmcelreavy said:
Seems interesting. I will wait for the 7.8 version to come out. I wouldn't want my phone to be stuck at 7.5 for some reason after trying this.
Click to expand...
Click to collapse
If for some reason it doesn't update to 7.8, you could always just flash the stock Rogers rom back to your phone and then get 7.8.
Sent from my RM-820_nam_att_100 using Board Express
Have no problem with 4G, sharing and MMS on original AT&T firmware (using my lum with Europe operators).
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it but the NA ops do?
valuxin said:
Have no problem with 4G, sharing and MMS on original AT&T firmware (using my lum with Europe operators).
Click to expand...
Click to collapse
sa-10 said:
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it but the NA ops do?
Click to expand...
Click to collapse
May be, may be... But I had problem too with this features, when it worked on a 1st firmware (flashed by AT&T, not by me). Then I decided to flash it on my own via Care Suite (had flashed the earliest firmware, then updated via Zune). Now it works without any problems. After flashing try to not use the Nokia's Network Setup. If sharing would be OK, you could install NNS on your choice
It works for me after doing a hard reset with t) mobile, if I run NetworkSetup then it stops working. If I insert my att sim then it also stops working.
Sent from my RM-820_nam_att_100 using Board Express
One more datapoint...
Recently unlocked, using Taiwan Cellular unable to tether.
Before installing Network Setup receive message: no data connection found...
After installing Network Setup, "to enable tethering on this device, go to att.com...".
Same SIM card in HD7 allows internet sharing... no problem. So it's not the SIM.
On HD7, data connection shows "H" but on Lum900 showing "4G"... (not a problem, just observation)
Have hard reset with Taiwan SIM, no joy. Reflashed using Nokia Care Suite... same results.
1. It's clear, stay away from Network Settings app. Even overriding APN settings results in same bogus ATT message.
Any point in flashing a pre-8779 rom? One of the TelCel MX or Claro LTE roms?
To flash another RM808 carrier's rom on top of an ATT RM808 device, is it a straight flash with NCS or need to rename files?
deleted
Hey all. I'm currently running a D855V (Australian model) rooted on stock Android 4.4.2.
So I recently upgraded to Lollipop but couldn't use it fully due to issues with some other software of mine. So I used the KDZ method to flash back to 10E. Since then I've lost all 4G/LTE on my phone.
I've tried changing the networking mode inside the mobile network settings from GSM/WCDMA to GSM/WCDMA/LTE but once selected my entire mobile network will drop. From there it will regain network connectivity for about 10 seconds (minus any data connection) and then drop off again, showing no network. It will continue to do this until I change the network type back to GSM/WCDMA or reboot (which defaults the connectivity method back to GSM/WCDMA anyway). I tried flashing the 10C firmware too (for Australia) but this will do the exact same thing.
I've also tried changing the LTE RAT settings inside the hidden menu to GSM/WCDMA/LTE and it still won't connect. It will drop the network like the previous method but will then reconnect only with a HSDPA connection rather than 4G/LTE.
I've checked the SIM card in another phone and it works fine with 4G/LTE. I've also checked my IMEI and it shows that I do have one so I can rule that out. Right now I"m at a loss. I'm thinking I need to flash a new radio or baseband but I can't find any info about that from any of the other threads I've read.
Any info at this stage would be great as it sucks having the 2nd best 4G speeds in the world and not being able to use them.
Cheers all.
EDIT: Resolved it by flashing KK modem/baseband. Thanks to JDr0iD for the suggestion. Turns out the KK and LP basebands are done differently. Figures considering the massive overhaul they've done with it. Anyway the modem can be found here - https://mega.co.nz/#!61QBVS5B!pa2xdGyeWAJKyAazkz9O8qc5b9hJOpxX5kaU_aFdjq4
potplanty said:
Hey all. I'm currently running a D855V (Australian model) rooted on stock Android 4.4.2.
So I recently upgraded to Lollipop but couldn't use it fully due to issues with some other software of mine. So I used the KDZ method to flash back to 10E. Since then I've lost all 4G/LTE on my phone.
I've tried changing the networking mode inside the mobile network settings from GSM/WCDMA to GSM/WCDMA/LTE but once selected my entire mobile network will drop. From there it will regain network connectivity for about 10 seconds (minus any data connection) and then drop off again, showing no network. It will continue to do this until I change the network type back to GSM/WCDMA or reboot (which defaults the connectivity method back to GSM/WCDMA anyway). I tried flashing the 10C firmware too (for Australia) but this will do the exact same thing.
I've also tried changing the LTE RAT settings inside the hidden menu to GSM/WCDMA/LTE and it still won't connect. It will drop the network like the previous method but will then reconnect only with a HSDPA connection rather than 4G/LTE.
I've checked the SIM card in another phone and it works fine with 4G/LTE. I've also checked my IMEI and it shows that I do have one so I can rule that out. Right now I"m at a loss. I'm thinking I need to flash a new radio or baseband but I can't find any info about that from any of the other threads I've read.
Any info at this stage would be great as it sucks having the 2nd best 4G speeds in the world and not being able to use them.
Cheers all.
Click to expand...
Click to collapse
Hey mate. Do you think modem is still linked to lollipop? Try another modem or restore EFS to see if makes a difference
Sent from my LG-D855 using XDA Free mobile app
think it might be an lteconfig issue?
It's a UK vodafone G4 which I got unlocked and was using my O2 sim without issues. I ported the O2 number to iD Mobile (three network) and can use SMS as well as mobile data but calling doesn't work at all.
I put a Three sim in and it's exactly the same issue. The iD sim works fine in other phones. Other sim cards work fine in the G4. It's just iD and Three sims that won't make or receive calls.
I since used LGUP to install a kdz file (V20c-234-15) in the hope anything vodafone will be removed but that didn't make any difference. In the phone Settings if I check Network Status it shows the iD connections, in Status it shows Unknown Phone Number, in Network Mode it displays 2G/3G/4G, APN shows all correct iD settings. If I search for Available Networks it displays all the usual UK networks and only lets me select iD network.
Customer service said wait a few more days after porting and suggested a faulty sim (yet works in other phones) but after both iD and Three sims showing the same issue I've not much hope in their suggestions.
I know others that bought the vodafone G4 and unlocked it for Three haven't had any issues. I only found 1 other post online that has the exact same issue as me but their post hasn't updated since last month.
I don't know what to try. Other sims work, just not iD/Three. Any ideas for me to try?
I've since tried another kdz file for lollipop as I know for sure the sim worked before the number was ported before the phone was upgraded to MM.
Still doesn't work for calls, only data and SMS.
Can anyone offer more suggestions to try?
Sent from my SM-T520 using Tapatalk
djnield said:
I've since tried another kdz file for lollipop as I know for sure the sim worked before the number was ported before the phone was upgraded to MM.
Still doesn't work for calls, only data and SMS.
Can anyone offer more suggestions to try?
Sent from my SM-T520 using Tapatalk
Click to expand...
Click to collapse
This is a weird problem maybe your problem is modem or wrong kdz file. Downlaod right file and flash again and be sure that you click refrush that is makes wipe in LGUP.(I use LGUP)
cashflow67 said:
This is a weird problem maybe your problem is modem or wrong kdz file. Downlaod right file and flash again and be sure that you click refrush that is makes wipe in LGUP.(I use LGUP)
Click to expand...
Click to collapse
Thanks,
I had this problem with stock rom too though. I only started trying more kdz files in the hope that might work. Issue started the moment my number ported from O2 to iD Mobile.
Wierdly the phone doesn't like Three network sims either now and those worked fine before the number port happened.
Am really confused
Sent from my SM-T520 using Tapatalk
Ht c 10
Sprint
Unlocked
S-On
When i purchased this phone it was running Viper nougat rom with functional LTE
I updated to oreo firmware and lte gone. It would only show 3g where as i am in full lte coverage zone
I flashed different oreo and pie roms but fruitless
I tried to fix by erasing modemst1 and 2 but it always give error of 35 partition
Today i downgraded to Nougat and erase persist but it is still same
i can only get 3g no 4g or lte
I tried network reset by ##72786# but it eventually sim locked my phone and i had to unlock it manually
Any suggestion or possible fix
Thanks in advance
did you find the answer?
I have also lost connection. Except mine is both 3G and 4G. Oddly I can still call, text, use wifi and putting the sim in my other phone works just fine. I have no clue what's wrong. I've tried everything at this point.
Here's a link to my thread if you wish to follow any solutions provided if someone comments.
https://forum.xda-developers.com/htc-10/help/internet-connectivity-htc-10-please-help-t3946949
It had same situation but eventually I solved it. Now LTE is working. First of all, need to be S-OFF and then after unlocking SIM, you can install any firmware with any ROM that supports the encryption...Either US unlocked or UK International Roms will fix the LTE issue. One thing to notice: you must keep the data partition unformatted for keeping the SIM lock status and need to use SPRINT or VERIZON radio. I am using stock Oreo from with Verizon radio + Magisk.
In addition, I unlocked LTE bands as well with DFS Qualcomm tool