Ht c 10
Sprint
Unlocked
S-On
When i purchased this phone it was running Viper nougat rom with functional LTE
I updated to oreo firmware and lte gone. It would only show 3g where as i am in full lte coverage zone
I flashed different oreo and pie roms but fruitless
I tried to fix by erasing modemst1 and 2 but it always give error of 35 partition
Today i downgraded to Nougat and erase persist but it is still same
i can only get 3g no 4g or lte
I tried network reset by ##72786# but it eventually sim locked my phone and i had to unlock it manually
Any suggestion or possible fix
Thanks in advance
did you find the answer?
I have also lost connection. Except mine is both 3G and 4G. Oddly I can still call, text, use wifi and putting the sim in my other phone works just fine. I have no clue what's wrong. I've tried everything at this point.
Here's a link to my thread if you wish to follow any solutions provided if someone comments.
https://forum.xda-developers.com/htc-10/help/internet-connectivity-htc-10-please-help-t3946949
It had same situation but eventually I solved it. Now LTE is working. First of all, need to be S-OFF and then after unlocking SIM, you can install any firmware with any ROM that supports the encryption...Either US unlocked or UK International Roms will fix the LTE issue. One thing to notice: you must keep the data partition unformatted for keeping the SIM lock status and need to use SPRINT or VERIZON radio. I am using stock Oreo from with Verizon radio + Magisk.
In addition, I unlocked LTE bands as well with DFS Qualcomm tool
Related
Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
What did you do to get it to pick up a signal at all?
I've done the 8322 NV edit and tried both GSM/WCDMA and Global modes by going into *#*#4636#*#*. Phone is stuck on "Searching for Service". Even tried a few build.prop edits and using build.prop from my RAZR M. No luck there either. I've tried flashing XT907 modem, also erased modemst1 and modemst2. I also tried with and without flashing XT907's fsg. I don't know what fsg is, but the FXZ always flashes modem, fsg, then erases modemst1 and modemst2. No luck there either. Can't even turn on the radio with the modem FW from XT907.
The fact you managed to get it to show a signal bar at all is further than I got.
adbshellsu said:
Hey whats up xda. As some of you know the Electrify M as the sister phone to the Razr M. Ive used this phone for the past couple of months on PagePlus and just figured I'd start messing around with it to possibly be able to use it on tmobile/att. In the last 2 days Ive made some progress using a tmobile sim card. It picked up signal but wasn't successful with calls, text or data. I didnt have enough time to fully test it since its my brothers sim but at the moment have a simple mobile sim for testing which for a briefly picked up signal when attempting to register on the network and display (network with limited service found) and not finish afterwards saying something similar to (service not available please try again later). Well now when I try to search for the network on simple mobile card attempts are unsuccessful and displaying (network unavailable). It only displays the phone number and voicemail icon at the moment. I'm currently trying to detect network on simple mobile again and go from there. T-mobile sim belongs to my brother so I'll prob go pickup a prepaid sim soon to test. It still displays signal on lte13/lte14 when tmobile sim inserted but still no signal the active simple mobile micro-sim which I read people have had trouble registering on the network sometimes. If I get anywhere Ill post it in development until then I have to get my post count up to do so.
Click to expand...
Click to collapse
Macau ChinaTelecom Mcc Mnc 45502 also have this issue, can't use 3G and 1X .
flash aussie radio
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
mtchby said:
flash aussie radio then it will be gsm and u can connect, i dont have link but someone should link it
Click to expand...
Click to collapse
Can anyone verify this?
Sent from Lenovo Erazer Z500 @ AOSP Android 4.4.2
https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1
Unknown vintage.
help
aviwdoowks said:
[]https://docs.google.com/file/d/0Bwo0TMNUxZfFRno1V3o4dmlyb0E/edit?pli=1[/url]
Unknown vintage.
Click to expand...
Click to collapse
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
mtchby said:
ok so i downloaded that now do i just go into fastboot and flash it or? and if so what is the command, cheers
Click to expand...
Click to collapse
fastboot flash modem NON-HLOS.bin
I also did:
fastboot erase modemst1
fastboot erase modemst2
Because that's what the fxz does.
Didn't work for me though. No signal, can't do *#*#4636#*#*, can't get into Status in About Phone, can't get into Mobile networks in Wireless & networks, Baseband version says UNKNOWN. Maybe I got a bad download? It did seem unusually fast. My MD5 sum is C3F9B3BAD2D5454C4E6D6F7803136567.
UPDATE: Downloaded official Aussie FXZ and flashed modem_signed. Same thing. Either there's more to it, or guy that suggested it is trolling.
I found it in an old tmobile hack thread I think.
Hey guys, I have an LG G3 now on 47A that I updated using LG Flash tool/kdz. Unrooted and stock. I want to flash Fulmics but every thread says that the older versions of Fulmics didn't have working mobile data and bad connectivity for the Verizon variant. Is the new version the same? Also to root my phone and flash twrp, I heard about the tot method. However, many users say their IMEI reset to 0000000 and their phones were unable to connect to any network. How true is this? Did anyone experience this as well? Thank you everyone in advance!
Note: i am using a non Verizon 4g Sim. As of now, 4g and networks work seamlessly. Ive tried the following carriers on 4g and they all work: T-Mobile US 4g, Airtel IN 3g and 4g (both sim cards work), Vodafone AU 4g.
lg g3
TheSkilledPlaya said:
Hey guys, I have an LG G3 now on 47A that I updated using LG Flash tool/kdz. Unrooted and stock. I want to flash Fulmics but every thread says that the older versions of Fulmics didn't have working mobile data and bad connectivity for the Verizon variant. Is the new version the same? Also to root my phone and flash twrp, I heard about the tot method. However, many users say their IMEI reset to 0000000 and their phones were unable to connect to any network. How true is this? Did anyone experience this as well? Thank you everyone in advance!
Note: i am using a non Verizon 4g Sim. As of now, 4g and networks work seamlessly. Ive tried the following carriers on 4g and they all work: T-Mobile US 4g, Airtel IN 3g and 4g (both sim cards work), Vodafone AU 4g.
Click to expand...
Click to collapse
no its not true
i have lg g3 vs985 ,i tried many custom roms and flashed stock rom with the help of tot method ,nothing happens.
TheSkilledPlaya said:
Hey guys, I have an LG G3 now on 47A that I updated using LG Flash tool/kdz. Unrooted and stock. I want to flash Fulmics but every thread says that the older versions of Fulmics didn't have working mobile data and bad connectivity for the Verizon variant. Is the new version the same? Also to root my phone and flash twrp, I heard about the tot method. However, many users say their IMEI reset to 0000000 and their phones were unable to connect to any network. How true is this? Did anyone experience this as well? Thank you everyone in advance!
Note: i am using a non Verizon 4g Sim. As of now, 4g and networks work seamlessly. Ive tried the following carriers on 4g and they all work: T-Mobile US 4g, Airtel IN 3g and 4g (both sim cards work), Vodafone AU 4g.
Click to expand...
Click to collapse
The VS985 variant takes on the ROM flawlessly, but yes there have been reported data issues regarding using the variant with the Verizon network. I believe it stems from the international GSM rom built around the GSM radio interface layer. I would NOT be surprised to see that T-Mobile and others work well, but you will need to research the Fulmics thread to know for sure, as I only know that my VZW SIM does not work properly. (3G only)
kp263 said:
no its not true
i have lg g3 vs985 ,i tried many custom roms and flashed stock rom with the help of tot method ,nothing happens.
Click to expand...
Click to collapse
Thank you very much for your input. I may give it a try later.
b00ster23 said:
The VS985 variant takes on the ROM flawlessly, but yes there have been reported data issues regarding using the variant with the Verizon network. I believe it stems from the international GSM rom built around the GSM radio interface layer. I would NOT be surprised to see that T-Mobile and others work well, but you will need to research the Fulmics thread to know for sure, as I only know that my VZW SIM does not work properly. (3G only)
Click to expand...
Click to collapse
Ahh alright, I guess 3G only is fine with me (I only message people over mobile data, nothing else). I'll do my research then. So text messaging/calling works?
Thanks.
TheSkilledPlaya said:
Ahh alright, I guess 3G only is fine with me (I only message people over mobile data, nothing else). I'll do my research then. So text messaging/calling works?
Thanks.
Click to expand...
Click to collapse
Seems like SMS/Calling worked for me...but had troubles with MMS. Others were able to get both working with Textra/Handscent/etc but not the stock messenger app. It's been awhile ago since I tried the international ROM's and they're all kind of a blur from some reason. Not being able to get signal bars working was a deal breaker for me (travel in the states quite a bit) so I broke away. I believe the XSPIRIT is working on fixes for the international ROM. Once his source code becomes available it should open up a world of LG Goodness. Currently , the ROM's I tried were Andy's, TekCafe, LG Prime, Fulmics....all display the same problem, the ability for Verizon SIM's to completely work properly.
My friend brought an original refurbish Samsung N910v android version 5.01 which was working with GSM 2G if not 3G until when I tried to update to new version android v6.0.1. In the menu>setting>about when I checked first before anything it showed me N910 F v5.01 but in boot mode Odin it was N910v.The problem started when I just typed *#9090# the phone immediately started reboot loop. I have managed to unlock the boot loader and root the phone installed custom rom version 6.0.1 by Paul Pizz rom VRU2CPJ2.r-1 but still can not have 2G or 3G GSM network. Please help to revive the phone again whether it meant to go back to 5.0.1 that would work with gsm cause am full stack now.
Have you checked to ensure you have the APN information in place? I have a Galaxy Note 4 N910V now (just got it a few days ago) and when I put my T-Mobile SIM in it from the very first time I have to manually put in the APN data - on custom ROMs it's usually picked up and there automagically but not always so, my suggestion is that you check to make sure your APN information is currently there as it should be.
Settings - More - Cellular networks - Access Point Names - make sure the one you need to be using is selected and if it's not then you'll have to put that info in manually and save it.
As for the actual model number, take the battery out and see what the model number is on the sticker in the battery compartment area - if the sticker isn't there then it could be a device that someone has done some experimenting with because that info can be changed. The sticker should be there, of course, but sometimes people take 'em out when they're mucking around with stuff, who knows.
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
gruka said:
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
Click to expand...
Click to collapse
The APN will be your network. Are trying to use Verizon? If so, you should have a spot to tic the VZWINTERNET. If not, then you have a sim card issue.
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
gruka said:
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
Click to expand...
Click to collapse
Is the sim from verizon? If you have a good account go to a corporate store and have them give you a new one. It's free.
Also, what are your APN settings and I will compare to mine. Everything works on mine.
the fone I have came from china ,am in Africa and remember I told you it was working woth N910f firmware version 5.0.1.All am asking is there anyway I could make this fone work again on Gsm network, cause all it says after re flash is the card is not from verizon
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
gruka said:
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767122226
- N910VVRU2CPJ2_FullFirmware_NoAboot<--- Full Framework with no aboot so you will not re-lock bootloader, but will unroot and restore back to 100% stock. once your on the full stock check if your connections are working fine, if they are then install custom rom, otherwise change the sim card
go in settings, connections and select network mode to global, should be fine
I have an unlocked HTC 10, running Android 7.0 (2.51.617.32), I have it rooted with S-Off. In the states I had also modified it to use it on Verizon, besides that it is stock. I am currently doing a job in Nicaragua and decided to get a local sim though CLARO Mobil, phone should be compatible on band 4. Unfortunately, I get no data connection.... I have tried manually setting an APN, as well as playing with the setting on the 'secret menu' (*#*#4636#*#*) no luck thus far I either get 'emergency calls only', or voice and text with Data Technology on disconnected or at one point saying connecting but never successfully. Thoughts?
I picked up an HTC 10 partially on the premise of all the international bands it has and the potential for international connections.
Bumpity Bump Bump?
Bumpin' for a new hope
I'm in the El Salvador
Everything works fine for me, I have a HTC from Sprint unlocked using Oreo try to flash the RUU of the unlocked version or just flash the radio using the following article.
https://forum.xda-developers.com/htc-10/how-to/radio-htc10-radio-collection-t3398233
Regards,
SOLVED!!!!
Alexruilli said:
Everything works fine for me, I have a HTC from Sprint unlocked using Oreo try to flash the RUU of the unlocked version or just flash the radio using the following article.
https://forum.xda-developers.com/htc-10/how-to/radio-htc10-radio-collection-t3398233
Regards,
Click to expand...
Click to collapse
That did it! Thank you! I guess rewriting the radios to Verizon's isn't in harmony with international travel.
Good morning, I am running the latest Lineage 14.1 rom (14.1-20171204-Nightly-d2att) on the Samsung Galaxy S3 (SGH-I747) phone, this phone is rooted, running the latest TWRP (3.2.1.0) and the I747UCUFNJ2 baseband on this device, this device is fully rooted, and is SIM unlocked for use with any carrier, my carrier is T-Mobile.
Ever since installing this rom, and any roms higher than android 6.0 (I've ran CM 12, CM 12.1, CM 13, SlimKat, and AOSP roms), everything works perfectly except for my cellular data will not go higher than Edge (2G) and my complete cell connection will randomly disconnect for a few seconds then reconnect itself.
I've tried everything from changing the APN settings specified by T-Mobile for LTE connectivity, I've gotten a replacement SIM from T-Mobile, I'm lost at this point as to what the issue could be. According to T-Mobile I do have the BYOD option so unlike some carriers, the SIM is not supposed to be locked to a specific IMEI.
Does anyone have any idea what could be the issue and/or a solution to this? Is there a higher baseband that needs to be loaded to fix this that I'm not aware of?
Thanks for your help everyone.
The phone is also running the latest bootloader?
Yes it is.
I assume the cellular data works properly with a stock ROM.
Does the cellular data work with the sim in another phone? Cellular data works with another sim card in the s3?
try *#*#4636*#*#
Pigoath said:
try *#*#4636*#*#
Click to expand...
Click to collapse
connection problem or invalid MMI code
edit:nvm i got it working with *#*#4636#*#*, what can i don this menu to get lte running