Hi , I'm not really new here, only I've been reading quite a while whithout subscribing.
I live in the netherlands, work as boat mechanic.
My phone is LG C660 optimus pro, became slow and wifi got an error, won't turn on anymore, suddenly.
I tried to move to cyanomod, mainly to see whether it would fix wifi error, and I had cyanomod previously on my sony ericsson experia mini pro.
at the moment I have to use the sony again,
my LG C660 optimus pro is near bricked...
I did root it, went fine, ran clockworkmod recovery, also fine, then I tried to put on cyanomod stable version through MOD manager, went wrong somehow,
I now only get LG logo and it stays there.(it does get into emergency mode)
tried to reflash original using KDZ updater, program runs, have the firmware, finds connection witch my phone only if in emergency mode
(got modem disabled in system of windows)
KDZ starts working but errors and phone has no change
here's the log from KDZ :
22:10:02 : Launching SW update
22:10:02 : Unpacking KDZ
22:10:09 : KDZ file extraced
22:10:19 : Files were extracted.
22:10:19 : LGMobileDL Load.
22:10:19 : Port = -1
22:10:19 : Connecting to phone
22:10:29 : Check Phone mode = 1
22:10:47 : Phone type check.......
22:10:51 : LGMobileDL.DLL Loading....
22:10:51 : _SetAuthMark Fail
22:10:51 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:10:51 : _SetAuthMark Fail
22:10:51 : LoadCDMAPhoneData() Error
22:10:52 : GetProcAddress Error(127)
22:10:54 : ===FINISHED===
CAN ANYONE HELP ???
So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
itsbighead said:
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
Click to expand...
Click to collapse
Agreed. I have just used that and the same firmware to downgrade from V20H and it worked like a charm.
Stransky
Sent from my GT-I9505 using Tapatalk
Issue Solved
Thank you for your advice. If worked perfectly. This method is much easier.
Issue Solved!
Different version after upgrade
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
dude.. have you returned it to D855 from D855V?
i got no signal here.. do you have?
Bump . Any update regarding http://forum.xda-developers.com/showpost.php?p=59087574&postcount=5?
guys i m also having same issue please help me out...and tell me from where i have to start and which file i have to download...please tell [email protected] is my email id...or msg me there
Guys i m also facing same problem,i also tried many kdz firmwares but always stuck on 2% then a new window open with retry option i tried many times but same,phone is stuck on firmware update
.i took info of my fone and i search firmware for it with suffix but download link not working.these are the link which match my fone suffix.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4BSF5E029EAPD13760ZRW/D85520E_00.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3D3H1E02T2A2ZD0781Z02/D85520F_00.kdz
any1 among all of you can download these file then can upload on google i will be very thankfull.
delamanga said:
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
Click to expand...
Click to collapse
Hello , well i'am facing the same probleme did you find a solution ?
bafless said:
Hello , well i'am facing the same probleme did you find a solution ?
Click to expand...
Click to collapse
Did you find any solution cause im facing that problem
the only solution for this problem is flashing firmware to model 850 ATT, BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0 because this phone model is D850 not D855, sorry my english is not good, use model hack dll mod.dll to change D855 at D850 stock firm with LG flash tool
can you upload here dll that you used to flash d855 with d850 firmware
klodidr said:
can you upload here dll that you used to flash d855 with d850 firmware
Click to expand...
Click to collapse
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
XDA will not let me post links to download file, send me your email and I sent it
delamanga said:
So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Click to expand...
Click to collapse
my problem too
d855 flash with tot file
[ERROR] : Partition Change factory Partition (Phone!=tot)
Hello im using D855TR model 32gb and my device is stuck on LG logo. I research on the internet and saw some solutions. I tried to install lg pc suite then put my phone on download mode and repair from pc suite but pc suite doesn't recognize my phone so i could'nt do that.
Second is this ht tp://w ww.andro idroot z.c om /2 014/07 /ho w-to-u nroot-l g-g3-all -va riants.ht m l?m=1 (sorry had to post that link like that because first post ). It didnt work problem is OWNLOAD FAIL!!
PID:
IMEI:
Model: D855TR
DLL: D855
BIN:LDG855AT-00-010E-EUR-XX-JUL-08-201....
SWV:LGD855TRAT-00-V20H-TUR-XX-JAN-23....
SWOW:LGD855TRAT-00-V20H-GLOBAL-SI-JAN...
Devive Model is different!
Check Phone or DLL!
00000000
Factory Model Check ERROR!!
Now im dowloading a D855tr20h_00.kdz file and lg flash tool 2014 this would work ?
Are there any other things i can do ?
@FurkanA. Enter your imei here and you have the appropriate firmware for your phone : http://lg-phone-firmware.com/index.php?firmware=1
jac10000 said:
@FurkanA. Enter your imei here and you have the appropriate firmware for your phone : [[/URL]
Click to expand...
Click to collapse
I got it fixed, thanks.
Pretty much what the title says. My phone blue screens. This is the third time that it's happened in the past week...and I first installed it last week...lol
Got an LG G3 D855
Latest version of Paranoid Android
Did a completely clean install: using TWRP, wiped all available partitions, then flashed PA zip.
The first time it happened was the day I installed. I just kinda shrugged it off and went ahead with making it mine. And it happened earlier today and I went ahead and ignored that too. It just happened a third time (few hours after the second time; exact time after is shown below by uptime).
When it blue screened it gave me the following message on screen (without the astrisks)
*****************************
---------------------------------------------------------------------------------------
Subsystem Crash! : modem (susbsys-restart Resetting the SoC)
---------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash ! : modem (subsys-restart: Resetting the SoC)
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration
---------------------------------------------------------------------------------------
Board Info
rev.:1.0 speed,pvs: 3,7 serial : muhSerial
---------------------------------------------------------------------------------------
ERR crash log report. Version 3
Error in file wl1trm.c, line 404
Error message: WL1TRM: wl1_trm_grant_callback: Invalid Parameter(%d %d %d)
Time of crash(m-d-y h:m:s): 8-14-2015 21:32:46
Uptime (h:m:s): 5:12:38
Build ID: MPSS.DI.2.0.1.c1.13-0046-M8974AAAAANPZM-1
param: (0x5, 0x0, 0x0)
aux_msg:
qsdm_dbg_msg:
*****************************
Also, from what I've been able to find out, I think that that file might have something to do with radio functions, but I can't be sure because I just did a quick search.
Help would be greatly appreciated!
You should look in your device forum for help on this. I don't think it's a ROM specific issue. I'm pretty sure its a device specific issue
Try to Flash official stock Rom via KDZ or TOT&DLL method.
Thank you for watching this message!
My brother's phone is LG D857, he tried to change to D858HK, then that is fail and I dont know how he do that, that phone was bricked.
Then I tried to recover his phone to be D857, and that was work.
HOWEVER, he tried again, wanted to make that to be D858HK.
I have no idea what he did the last time.
I tried to help him by using the same method.
That phone can work in Download mode.
But cant work normally.
Finally, I surrender.... because I'm not good for that.
Let me tell you about the situation and what I tried.
1. LG FlashTool V1.8.6.527 (NPINLOCAL)
I downloaded the TOT of LGD857-00-V10A-CUO-CN-JUL-30-2014+0, LGD857_20140812_LGFLASHv160.dll
and LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0, LGD858HK_20140826_LGFLASHv160Z.dll
All are failed.
And the tool is showed:
#1. LGD857-00-V10A-CUO-CN-JUL-30-2014+0.TOT and LGD857_20140812_LGFLASHv160.dll
Model: D858HK
DLL: D857
BIN: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWOV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
Device Model is different!
Check Phone or DLL!
#2. LGD857-00-V10A-CUO-CN-JUL-30-2014+0.TOT and LGD858HK_20140826_LGFLASHv160Z.dll
#same as #1
only different are
DLL: D858HK
Bin Model is different!
Check DLL or BIN File!
#3. LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0.TOT and LGD857_20140812_LGFLASHv160.dll
same as #2
only different are
BIN: LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0
#4. LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0.TOT, LGD858HK_20140826_LGFLASHv160Z.dll
DLL: D858HK
BIN: LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0
SWV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWOV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
.................................
Start NORMAL Download
LAF: Bin_User Mode
Laf memory size :32!
Mermory Size is matched
[6:1:32] # # [ERROR]: Partition Change Sys........... (the behind words is not showed)
2. LG FlashTool2014 (kdz)
cannot connect to the phone. retry power off, power on , plug in usb, retry................and retry....................
3. Hard reset
No changed. Still in download mode.
============================================================================================================
I think the program for flashing TOT that can be used, but I have to change something in DLL or TOT before use, then can run the program.
Or edit the build Prop to change back to D857.
Please SEND HELP!
Thanks A LOT!:good: