Hi,
Lg G3 D850 Bricked By Flashing With LGFlashTool... Software Just Gave This Error..
Code:
Download FAIL!! [229 sec]
Success to St Mini OS Status 3.
Fail to Check Mini OS Status 3.
[17:12:32] FAIL!!!FACTORY_BOOTCOMPLETE()
00000064
ERROR: [17:12:32] FAIL!!! Factory_BootComplete
Now Getting This Error On Phone Screen With A Red Background..
Code:
WARNING..
Not Support QEM = 0
I Used This DLL "LGD850_20140613_LGFLASHv160.dll" And This Firmware "LGD850AT-01-V10d-310-410-JUN-19-2014+0.tot" To Flash My Phone It Was Already Running Stock Firmware 4.4.2..
Please Experts Need Your Help..
Problem Solved With Same DLL And Firmware..
Under device manager what does your phone show up as?
prince_arsalan said:
Problem Solved With Same DLL And Firmware..
Click to expand...
Click to collapse
how can solved it? please tell me how to solve problem.
Thank you for watching this message!
My brother's phone is LG D857, he tried to change to D858HK, then that is fail and I dont know how he do that, that phone was bricked.
Then I tried to recover his phone to be D857, and that was work.
HOWEVER, he tried again, wanted to make that to be D858HK.
I have no idea what he did the last time.
I tried to help him by using the same method.
That phone can work in Download mode.
But cant work normally.
Finally, I surrender.... because I'm not good for that.
Let me tell you about the situation and what I tried.
1. LG FlashTool V1.8.6.527 (NPINLOCAL)
I downloaded the TOT of LGD857-00-V10A-CUO-CN-JUL-30-2014+0, LGD857_20140812_LGFLASHv160.dll
and LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0, LGD858HK_20140826_LGFLASHv160Z.dll
All are failed.
And the tool is showed:
#1. LGD857-00-V10A-CUO-CN-JUL-30-2014+0.TOT and LGD857_20140812_LGFLASHv160.dll
Model: D858HK
DLL: D857
BIN: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWOV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
Device Model is different!
Check Phone or DLL!
#2. LGD857-00-V10A-CUO-CN-JUL-30-2014+0.TOT and LGD858HK_20140826_LGFLASHv160Z.dll
#same as #1
only different are
DLL: D858HK
Bin Model is different!
Check DLL or BIN File!
#3. LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0.TOT and LGD857_20140812_LGFLASHv160.dll
same as #2
only different are
BIN: LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0
#4. LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0.TOT, LGD858HK_20140826_LGFLASHv160Z.dll
DLL: D858HK
BIN: LGD858HKAT-00-V10d-HKG-XX-SEP-15-2014-32G+0
SWV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
SWOV: LGD857-00-V10A-CUO-CN-JUL-30-2014+0
.................................
Start NORMAL Download
LAF: Bin_User Mode
Laf memory size :32!
Mermory Size is matched
[6:1:32] # # [ERROR]: Partition Change Sys........... (the behind words is not showed)
2. LG FlashTool2014 (kdz)
cannot connect to the phone. retry power off, power on , plug in usb, retry................and retry....................
3. Hard reset
No changed. Still in download mode.
============================================================================================================
I think the program for flashing TOT that can be used, but I have to change something in DLL or TOT before use, then can run the program.
Or edit the build Prop to change back to D857.
Please SEND HELP!
Thanks A LOT!:good:
I tried to flash a D850 with lg flashtool and it gave me a " partition change error ", so i've put the dll that doesnt verifie the version , the device start flashing but then it turned off and became a hardbrick.
So, i tried to unbrick it with BoardDiag and got the error "No response from the device. Check PMIC first and if still boot problem, replace AP" when i repeat i get "device was not found in dload trying flash programmer"
i get it that the BoardDiag doesnt do the AP msm8975ac , so if you could help it would be great
P.S. when i use androidbrick_G3_fix.exe , and choose D850 i get Hello requst error , but when i choose D851 i passes and no error found but cant repair because device log out and in after scan is over , so does that mean i have a D851 ??? coz it is written D850 in the back of the phone
i really need ur help
Greetings
So now I have completed two months of trials trying to fix this thing. I figured it's time to post something.
I have an LG G3 D855 32GB GCC (As it says on the box). The device was not booting so I tried removing the battery for a couple of minutes and putting it back. It worked for a while but now it's dead. I changed the battery and it's still the same thing.
I searched around and found people suggesting flashing the TOT file. So I went to download mode (it used to go there ) tried flashing and I got an error. I don't recall the error to be honest.
Now the device won't boot and won't show the download mode screen. However, it gets recognized as "LGE AndroidNet USB Serial Port".
I tried the KDZ method and it doesn't work. The TOT method gives me the errors below:
When I use LGUP8974.dll
PID: NULL
IMEI: NULL
[ 9: 2:27] CrossDL [] to [D855]. SWersion[]
000000064
Error: [ 9: 2:27] CrossDL [] to [D855]. SWersion
When I use LGD855_20140526_LGFLASHv160.dll
PID: NULL
IMEI: NULL
Model :
DLL : D855
SWV :
SWOV :
Model Information Check FAIL !
I'm not sure how bad the situation is or what exactly I'm doing wrong. I tried searching and trying everything and none is working.
Notes:
I'm not sure if I'm using a proper TOT the one I'm using says (LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot)
Searching using my IMEI in a website resulted with the SW (D85530D_00)
have u resolved the issue ?
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!