Lg G3 D850 Bricked...!!! - G3 Q&A, Help & Troubleshooting

Hi,
Lg G3 D850 Bricked By Flashing With LGFlashTool... Software Just Gave This Error..
Code:
Download FAIL!! [229 sec]
Success to St Mini OS Status 3.
Fail to Check Mini OS Status 3.
[17:12:32] FAIL!!!FACTORY_BOOTCOMPLETE()
00000064
ERROR: [17:12:32] FAIL!!! Factory_BootComplete
Now Getting This Error On Phone Screen With A Red Background..
Code:
WARNING..
Not Support QEM = 0
I Used This DLL "LGD850_20140613_LGFLASHv160.dll" And This Firmware "LGD850AT-01-V10d-310-410-JUN-19-2014+0.tot" To Flash My Phone It Was Already Running Stock Firmware 4.4.2..
Please Experts Need Your Help..

Problem Solved With Same DLL And Firmware..

Under device manager what does your phone show up as?

prince_arsalan said:
Problem Solved With Same DLL And Firmware..
Click to expand...
Click to collapse
how can solved it? please tell me how to solve problem.

Related

[Q] LG G3 stuck in fastboot mode .... command write failed

hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
flashing
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
درورد بر برادر شیرازی
هماهنگ کن یه سر بیا مغازه ببینیم چیکارش میشه کرد
ضمن اینکه هزار تا تالار رفتی ولی یه سر به
تالار اندروید ایران
هم نزدی !
MOD EDIT - Translation added (seems a bit off)
Drvrd brother Shirazi
Come shop to see Chykarsh 's now a head coordinator
While thousands were leaving the hall , but a head
Android Forums Iran
Is near !
scamex said:
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
Click to expand...
Click to collapse
yes ... my problem is with the phone .. i guess one partition must be written in first place to get the other work and writeable .. but i tried all solution and still the phone give me no answer ... all i have tried to write even one partition failed .... any other ideas ???
mastershex said:
salam bar to ey hamshahri
dadash man khodam tahe LG kara hastam ... lg khamush hanuz az zire dastam birun narafte .... inam az save vasam umade .. teh rafte ... yazd rafte .. shirazam dase kolofta gashte alan reside dastam mikham kar be taviz hard nakeshe ... yani kari nis k nakarde basham rosh pasazh soti tasvir das doktor ham boode nashode ..... dg mundam chikaresh konam ... age rahnamaee ya file dari mamnon misham
Click to expand...
Click to collapse
ok , dar har soorat
dr ham ehtemalan vaght nadashte vagarna injoor mavaredo ghablan too g2 hal kardim
agar khasti ye sar biar checkesh konim
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
scamex said:
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
Click to expand...
Click to collapse
in this case that solution does not work i tried but no success ... im 100% sure of the spelling of what im typing .... any other idea ???
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Just stop using your phone and keep it dead for a week. It will get back to normal.
LG G3 Fastboot
i am having the exact same problem with my lg g3, and i cant find the solution anywhere on the internet. If you solved your problem please kindly share the procedure.....
Same problem here
Any news from the topicstarter? I have the same problem as well on my D855 that only fastboot is working.
I am not sure what happened but my phone just rebooted out of the blue and booted android as far as the lockscreen when it froze and rebooted again. After that only fastboot is showing up.
*Update: I brought my phone back to the store and it is fixed under warranty. I haven't received a report on the repair carried out so I only can guess what they have done and that is that they have replaced the mainboard (different IMEI now). Good news is that it works like it should. It's shipped to me running Lollipop so I will downgrade to Kitkat but that's just my personal preference.
I have the same problem with D855, is it dead mmc? any suggestions, anyone knows something?
Same problem here. Anyone can help finding a solution for this?
soltution for no download mode, stcuk in fastboot mode, stuck lg logo, qhsusb bulk mo
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
masrooraly said:
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
Click to expand...
Click to collapse
Send me ur team vuewer id and pass
Trying to respawn the post, becouse i have the same proble with my phone. I want to know if someone find a solution for it. Thanks
Same problem here..
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Same Problem here.. Any luck ?

[Q] LG G3 D855 32GB Bricked - Help

So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
itsbighead said:
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
Click to expand...
Click to collapse
Agreed. I have just used that and the same firmware to downgrade from V20H and it worked like a charm.
Stransky
Sent from my GT-I9505 using Tapatalk
Issue Solved
Thank you for your advice. If worked perfectly. This method is much easier.
Issue Solved!
Different version after upgrade
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
dude.. have you returned it to D855 from D855V?
i got no signal here.. do you have?
Bump . Any update regarding http://forum.xda-developers.com/showpost.php?p=59087574&postcount=5?
guys i m also having same issue please help me out...and tell me from where i have to start and which file i have to download...please tell [email protected] is my email id...or msg me there
Guys i m also facing same problem,i also tried many kdz firmwares but always stuck on 2% then a new window open with retry option i tried many times but same,phone is stuck on firmware update
.i took info of my fone and i search firmware for it with suffix but download link not working.these are the link which match my fone suffix.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4BSF5E029EAPD13760ZRW/D85520E_00.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3D3H1E02T2A2ZD0781Z02/D85520F_00.kdz
any1 among all of you can download these file then can upload on google i will be very thankfull.
delamanga said:
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
Click to expand...
Click to collapse
Hello , well i'am facing the same probleme did you find a solution ?
bafless said:
Hello , well i'am facing the same probleme did you find a solution ?
Click to expand...
Click to collapse
Did you find any solution cause im facing that problem
the only solution for this problem is flashing firmware to model 850 ATT, BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0 because this phone model is D850 not D855, sorry my english is not good, use model hack dll mod.dll to change D855 at D850 stock firm with LG flash tool
can you upload here dll that you used to flash d855 with d850 firmware
klodidr said:
can you upload here dll that you used to flash d855 with d850 firmware
Click to expand...
Click to collapse
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
XDA will not let me post links to download file, send me your email and I sent it
delamanga said:
So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Click to expand...
Click to collapse
my problem too
d855 flash with tot file
[ERROR] : Partition Change factory Partition (Phone!=tot)

Phone stuck on LG logo

Hello im using D855TR model 32gb and my device is stuck on LG logo. I research on the internet and saw some solutions. I tried to install lg pc suite then put my phone on download mode and repair from pc suite but pc suite doesn't recognize my phone so i could'nt do that.
Second is this ht tp://w ww.andro idroot z.c om /2 014/07 /ho w-to-u nroot-l g-g3-all -va riants.ht m l?m=1 (sorry had to post that link like that because first post ). It didnt work problem is OWNLOAD FAIL!!
PID:
IMEI:
Model: D855TR
DLL: D855
BIN:LDG855AT-00-010E-EUR-XX-JUL-08-201....
SWV:LGD855TRAT-00-V20H-TUR-XX-JAN-23....
SWOW:LGD855TRAT-00-V20H-GLOBAL-SI-JAN...
Devive Model is different!
Check Phone or DLL!
00000000
Factory Model Check ERROR!!
Now im dowloading a D855tr20h_00.kdz file and lg flash tool 2014 this would work ?
Are there any other things i can do ?
@FurkanA. Enter your imei here and you have the appropriate firmware for your phone : http://lg-phone-firmware.com/index.php?firmware=1
jac10000 said:
@FurkanA. Enter your imei here and you have the appropriate firmware for your phone : [[/URL]
Click to expand...
Click to collapse
I got it fixed, thanks.

[Q] Hardbricked LG G3

I tried to flash a D850 with lg flashtool and it gave me a " partition change error ", so i've put the dll that doesnt verifie the version , the device start flashing but then it turned off and became a hardbrick.
So, i tried to unbrick it with BoardDiag and got the error "No response from the device. Check PMIC first and if still boot problem, replace AP" when i repeat i get "device was not found in dload trying flash programmer"
i get it that the BoardDiag doesnt do the AP msm8975ac , so if you could help it would be great
P.S. when i use androidbrick_G3_fix.exe , and choose D850 i get Hello requst error , but when i choose D851 i passes and no error found but cant repair because device log out and in after scan is over , so does that mean i have a D851 ??? coz it is written D850 in the back of the phone
i really need ur help

LGUP New Tool For Flash (Kdz and TOT)

It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!

Categories

Resources