Related
Hi,
I am trying to upgrade the official sprint ROM on HTC Touch (RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship) On Current ROM : 3.02.651.2, Radio : 3.37.15
But I am getting ERROR [328] : INVALID COMMAND
Can somebody plz help me to thru this??
retesh101 said:
Hi,
I am trying to upgrade the official sprint ROM on HTC Touch (RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship) On Current ROM : 3.02.651.2, Radio : 3.37.15
But I am getting ERROR [328] : INVALID COMMAND
Can somebody plz help me to thru this??
Click to expand...
Click to collapse
Have you called Sprint to ask about this? Since your doing the official ROM update, they should have an answer for you.
You may want to try using a different pc. I got the same screen several times on my desktop. Tried it on my laptop and it worked just fine.
I’ve been able to resolve this on more than 1 occasion, I was able to resolve it by doing the following.
1. Create a new Windows Login/Profile with admin rights and a password.
2. Restart the computer
3. Login to the newly created windows account profile.
4. Place the device into boot loader (Tri-Color screen) you can do this by doing the following [Press and hold both the power button and the camera button, then press the reset button at the bottom]
5. Once the device is in boot loader mode (Tri-Color screen) plug the device into the PC you will notice that the bottom will change from “serial” to “USB”.
6. Once plugged in, download the official ROM update again from HTC’s website (Make sure you hit save and not run) then save it to the desktop so you know where it is at.
7. Once the download has completed run the ROM update again.
So tonight I was bored and wanted to try a new rom, I backed up my current Pacman rom, and went to install rootbox, installation finished succesfully, but when the rom was booting, the bootanimation froze, and suddendly I got this Blue Screen saying the following:
Subsystem Crash!
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash! : External_modem (Undefined error)
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
and just below this there are like 8 lines of pure random letters and symbols like "\Zp0ieKjmKxp {(<--51m<rZ--mZi.p0.mKp0x" etc etcetc
So I wiped everything(including format system) and tried reinstalling the rom, got the same result.
Wiped everything again and restored my nandroid backup of PacMan ROM, SAME THING HAPPENED, SAME ERROR ON BOOTANIMATION OF MY PREVIOUS ROM.
So I went ahead and wiped everything again! but now I restored the Stock LG 4.1.2 rom nandroid backup I had from last week, it booted just fine, but the phone didnt reognize my sim card, and after like 3 minutes botted The screen turned off and THE SAME ERROR APPEARED, but this time saying "Kernel Crash!"
Rebooted and the phone booted again just fine, and after like 5 minutes AGAIN SUBSYSTEM CRASH! it ends up happening every time.
The phone boots into recovery, fastboot, download mode, just fine.
I just have no idea on what to do now, I've googled everything but I have found no solutions or helpful information whatsoever, I don''t know what I did wrong, please guys I hope you can help me with this one, I cannot afford a new phone right know, thanks!
EDIT1: After different attempts with wiping and flashing roms and restoring backups with no luck, I was able to boot in my pacmanrom by flashing a different kernel, specifically, Kite Kernel 30, with this kernel the rom boots and it works just fine, although I got a couple of random reboots without the error previously pointed, but the problem is that MY PHONE DOESN'T RECOGNIZE MY SIM CARD ANYMORE, No matter what I do, pull it out pull it in, the phone doesnt even do anything, is like nothing is happening, I have wifi signal but no sim recognition.
Im trying to understand what this problem is all about, how flashing a different kernel made the rom boot? With Kite kernel it boots, but when i flash the old f93 kernel I used for weeks the phone wont boot, i get the same error in the bootanimation.
Please I need some feedback on this, this forum is so dead :S
Can you try kdz back to stock? If it happens after that then send it on repair, as long as you kdz back they can't see what you have done.
Man I live in freakin Venezuela, If I send my phone to LG, best case scenario im gonna get it back(or replaced) in like 3 months -_- I need to fix this on my own
So I used the KDZ to go back to stock firmware, and the phone boots, but in reboots all the time and my sim card is not recognized! Man did I screw up my device so hard?
LRC1710 said:
So tonight I was bored and wanted to try a new rom, I backed up my current Pacman rom, and went to install rootbox, installation finished succesfully, but when the rom was booting, the bootanimation froze, and suddendly I got this Blue Screen saying the following:
Subsystem Crash!
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash! : External_modem (Undefined error)
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
and just below this there are like 8 lines of pure random letters and symbols like "\Zp0ieKjmKxp {(<--51m<rZ--mZi.p0.mKp0x" etc etcetc
So I wiped everything(including format system) and tried reinstalling the rom, got the same result.
Wiped everything again and restored my nandroid backup of PacMan ROM, SAME THING HAPPENED, SAME ERROR ON BOOTANIMATION OF MY PREVIOUS ROM.
So I went ahead and wiped everything again! but now I restored the Stock LG 4.1.2 rom nandroid backup I had from last week, it booted just fine, but the phone didnt reognize my sim card, and after like 3 minutes botted The screen turned off and THE SAME ERROR APPEARED, but this time saying "Kernel Crash!"
Rebooted and the phone booted again just fine, and after like 5 minutes AGAIN SUBSYSTEM CRASH! it ends up happening every time.
The phone boots into recovery, fastboot, download mode, just fine.
I just have no idea on what to do now, I've googled everything but I have found no solutions or helpful information whatsoever, I don''t know what I did wrong, please guys I hope you can help me with this one, I cannot afford a new phone right know, thanks!
EDIT1: After different attempts with wiping and flashing roms and restoring backups with no luck, I was able to boot in my pacmanrom by flashing a different kernel, specifically, Kite Kernel 30, with this kernel the rom boots and it works just fine, although I got a couple of random reboots without the error previously pointed, but the problem is that MY PHONE DOESN'T RECOGNIZE MY SIM CARD ANYMORE, No matter what I do, pull it out pull it in, the phone doesnt even do anything, is like nothing is happening, I have wifi signal but no sim recognition.
Im trying to understand what this problem is all about, how flashing a different kernel made the rom boot? With Kite kernel it boots, but when i flash the old f93 kernel I used for weeks the phone wont boot, i get the same error in the bootanimation.
Please I need some feedback on this, this forum is so dead :S
Click to expand...
Click to collapse
what is phone model? E975 or 973?
geoworld_200 said:
what is phone model? E975 or 973?
Click to expand...
Click to collapse
E977
Just stating a probability here. But not sure. Maybe its not that ur phone isn't recognising the sim. Maybe u just have the wrong radios. Try flashing a radio for ur model.
Sent from my LG-E975 using xda app-developers app
I'm getting this:
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
I've been using CM10.1 for 1 month since I bought my Optimus G and it was great. No crashes and it was a joy to use. Today I started getting this message with the phone rebooting itself after a couple of seconds. I tried a wipe and flash CM10.1 again from scratch but I cannot get it fixed. The phone keeps rebooting over and over again. Now I'm trying to flash the stock rom but it doesn;t work as the phone keeps rebooting all the time. The LG support tool doesn't even connect to it long enough. Any suggestions?
edvar said:
I'm getting this:
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
I've been using CM10.1 for 1 month since I bought my Optimus G and it was great. No crashes and it was a joy to use. Today I started getting this message with the phone rebooting itself after a couple of seconds. I tried a wipe and flash CM10.1 again from scratch but I cannot get it fixed. The phone keeps rebooting over and over again. Now I'm trying to flash the stock rom but it doesn;t work as the phone keeps rebooting all the time. The LG support tool doesn't even connect to it long enough. Any suggestions?
Click to expand...
Click to collapse
Dude I managed to flash the stock ROM in download mode with the tool but the phone had the same issue, kept rebooting no matter what I did , tried everything and nothing solved it, took it to warranty and they fixed it by replacing the logic board...
Enviado desde mi LG-E975 usando Tapatalk 4
LRC1710 said:
Dude I managed to flash the stock ROM in download mode with the tool but the phone had the same issue, kept rebooting no matter what I did , tried everything and nothing solved it, took it to warranty and they fixed it by replacing the logic board...
Enviado desde mi LG-E975 usando Tapatalk 4
Click to expand...
Click to collapse
What tool did you use? I'm trying to flash stock so I can get it fixed using the warranty
edvar said:
What tool did you use? I'm trying to flash stock so I can get it fixed using the warranty
Click to expand...
Click to collapse
Used the LG oficial tool, but put the phone in download mode first
The phone goes in download mode fine but the LG Tool doesn't recognize it's connected. I tried to use this other tool http://forum.xda-developers.com/showthread.php?p=44186257 but the phone just restarts into fastboot and doesn't do anything.
I forgot to mention I used this tool before to try and re-flash CM10: http://forum.xda-developers.com/showthread.php?t=2230994 . Now I don't even get the LG logo at boot anymore, just a Google logo.
edvar said:
The phone goes in download mode fine but the LG Tool doesn't recognize it's connected. I tried to use this other tool http://forum.xda-developers.com/showthread.php?p=44186257 but the phone just restarts into fastboot and doesn't do anything.
I forgot to mention I used this tool before to try and re-flash CM10: http://forum.xda-developers.com/showthread.php?t=2230994 . Now I don't even get the LG logo at boot anymore, just a Google logo.
Click to expand...
Click to collapse
UPDATE:
I managed to install stock using the KDZ Updater. When it begins the process the phone reboots into fasboot and I guess the KDZ Updater doesn't know what do to after that. With the KDZ Updater still running on the computer I just disconnected the phone and put it back in Download Mode. After that KDZ Updater started to do its thing and re-flashed stock! Now I can send the phone for repair and use the warranty
I have same issues with my LGE-975, EU version.
This can happen once per month. Or 10 times a day
It's clean install, did it two times just to be sure. Updated baseband from 10b to 10d. So now it's
LGE975AT-00-V10d-EUR-XX-APR-01-2013+0
CM 10.1.2-e975
kernel 3.4.0-CM+ [email protected] #1 Thu Jul 11 18:03:45 PDT 2013
buildnumber cm_e975-userbug 4.2.2 JDQ39E
eng.jenkins.20130711.175036 test-keys
The only trace in logs seems to be this (from last_kmsg):
pmmSendInitPowerSaveMsg: 615: Beacon count is zero, can not retrieve the TSF, failing the Enter Bmps Request
[10015.935661 / 08-12 21:41:00.454]
[10015.935722 / 08-12 21:41:00.454] [WLAN][706:E E ] pmmInitBmpsPwrSave: 485: pmmBmps: Init Power Save Request Failed: Sending Response: 1
[10015.935753 / 08-12 21:41:00.454]
[10015.935844 / 08-12 21:41:00.454] [WLAN][706:E :SME] pmcProcessResponse: 1367: Response message to request to enter BMPS indicates failure, status 235
[10015.935875 / 08-12 21:41:00.454]
[10016.935509 / 08-12 21:41:01.455] [WLAN][706:E E ] pmmSendInitPowerSaveMsg: 615: Beacon count is zero, can not retrieve the TSF, failing the Enter Bmps Request
[10016.935539 / 08-12 21:41:01.455]
[10016.935600 / 08-12 21:41:01.455] [WLAN][706:E E ] pmmInitBmpsPwrSave: 485: pmmBmps: Init Power Save Request Failed: Sending Response: 1
[10016.935631 / 08-12 21:41:01.455]
[10016.935692 / 08-12 21:41:01.455] [WLAN][706:E :SME] pmcProcessResponse: 1367: Response message to request to enter BMPS indicates failure, status 235
------------------------------------------------- Lines above are OK----------------------------------------------------
aaand now goes bang...
[10016.935722 / 08-12 21:41:01.455]
[10017.007628 / 08-12 21:41:01.525] mdm_errfatal: Reseting the mdm due to an errfatal
[10017.007689 / 08-12 21:41:01.525] subsys-restart: subsystem_restart_dev(): Restart sequence requested for external_modem, restart_level = 1.
[10017.007781 / 08-12 21:41:01.525] Kernel panic - not syncing: subsys-restart: Resetting the SoC - external_modem crashed.
[10017.007903 / 08-12 21:41:01.525] [<c0014478>] (unwind_backtrace+0x0/0x11c) from [<c084be9c>] (panic+0x90/0x1d8)
[10017.007995 / 08-12 21:41:01.525] [<c084be9c>] (panic+0x90/0x1d8) from [<c005c320>] (subsystem_restart_dev+0x134/0x174)
[10017.008056 / 08-12 21:41:01.525] [<c005c320>] (subsystem_restart_dev+0x134/0x174) from [<c0079cc4>] (mdm_errfatal+0x6c/0x88)
[10017.008147 / 08-12 21:41:01.525] [<c0079cc4>] (mdm_errfatal+0x6c/0x88) from [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290)
[10017.008239 / 08-12 21:41:01.525] [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290) from [<c00cf544>] (handle_irq_event+0x3c/0x5c)
[10017.008300 / 08-12 21:41:01.525] [<c00cf544>] (handle_irq_event+0x3c/0x5c) from [<c00d1dcc>] (handle_edge_irq+0x12c/0x168)
[10017.008361 / 08-12 21:41:01.525] [<c00d1dcc>] (handle_edge_irq+0x12c/0x168) from [<c00ceba4>] (generic_handle_irq+0x2c/0x40)
[10017.008452 / 08-12 21:41:01.525] [<c00ceba4>] (generic_handle_irq+0x2c/0x40) from [<c025a90c>] (msm_summary_irq_handler+0x7c/0xbc)
[10017.008514 / 08-12 21:41:01.525] [<c025a90c>] (msm_summary_irq_handler+0x7c/0xbc) from [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290)
[10017.008575 / 08-12 21:41:01.525] [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290) from [<c00cf544>] (handle_irq_event+0x3c/0x5c)
[10017.008666 / 08-12 21:41:01.525] [<c00cf544>] (handle_irq_event+0x3c/0x5c) from [<c00d2004>] (handle_fasteoi_irq+0xdc/0x148)
[10017.008727 / 08-12 21:41:01.525] [<c00d2004>] (handle_fasteoi_irq+0xdc/0x148) from [<c00ceba4>] (generic_handle_irq+0x2c/0x40)
[10017.008788 / 08-12 21:41:01.525] [<c00ceba4>] (generic_handle_irq+0x2c/0x40) from [<c000ede0>] (handle_IRQ+0x7c/0xc0)
[10017.008849 / 08-12 21:41:01.525] [<c000ede0>] (handle_IRQ+0x7c/0xc0) from [<c00085d0>] (gic_handle_irq+0x94/0x110)
[10017.008910 / 08-12 21:41:01.525] [<c00085d0>] (gic_handle_irq+0x94/0x110) from [<c0859500>] (__irq_svc+0x40/0x70)
[10017.008971 / 08-12 21:41:01.525] Exception stack(0xc0e05f28 to 0xc0e05f70)
[10017.009002 / 08-12 21:41:01.525] 5f20: 00000000 00000000 00000001 00000000 00000000 00000000
[10017.009063 / 08-12 21:41:01.525] 5f40: c0e58108 00000003 00000000 c0e58108 00000000 00000000 00000000 c0e05f70
[10017.009093 / 08-12 21:41:01.525] 5f60: c00ee2a4 c005de64 60000013 ffffffff
[10017.009185 / 08-12 21:41:01.525] [<c0859500>] (__irq_svc+0x40/0x70) from [<c005de64>] (msm_cpuidle_enter+0x70/0x78)
[10017.009246 / 08-12 21:41:01.525] [<c005de64>] (msm_cpuidle_enter+0x70/0x78) from [<c04bce70>] (cpuidle_enter+0x14/0x18)
[10017.009307 / 08-12 21:41:01.525] [<c04bce70>] (cpuidle_enter+0x14/0x18) from [<c04bd3f0>] (cpuidle_idle_call+0x1e0/0x3c0)
[10017.009399 / 08-12 21:41:01.525] [<c04bd3f0>] (cpuidle_idle_call+0x1e0/0x3c0) from [<c000f3c4>] (cpu_idle+0x88/0xf0)
[10017.009460 / 08-12 21:41:01.525] [<c000f3c4>] (cpu_idle+0x88/0xf0) from [<c082b508>] (rest_init+0x88/0xa0)
[10017.009551 / 08-12 21:41:01.525] [<c082b508>] (rest_init+0x88/0xa0) from [<c0d008b4>] (start_kernel+0x428/0x490)
[10017.110726 / 08-12 21:41:01.525] wcnss_8960: crash shutdown : 0
[10017.411443 / 08-12 21:41:01.525] Rebooting in 5 seconds..
[10022.420630 / 08-12 21:41:01.525] Going down for restart now
[10022.420661 / 08-12 21:41:01.525] pm8921_turn_on_19p2mhz_clk: Kick Start
[10022.420752 / 08-12 21:41:01.525] check battery fet
[10022.420813 / 08-12 21:41:01.525] pm_chg_batfet_get: get CHG_BATFET_ON=0
DemiGod Crash Handler : critical error LG G2 F320L, please help me?
DemiGod Crash Handler : critical error
Press key to choose Dload Mode/Reboot/Fastboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
3) Power : Fastboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QCT's Memory Debug App.
3) Send e-mail to contact point ....
no imei, no download mode, no recovery, can't KDZ, can't use plash tool,
Greetings
So now I have completed two months of trials trying to fix this thing. I figured it's time to post something.
I have an LG G3 D855 32GB GCC (As it says on the box). The device was not booting so I tried removing the battery for a couple of minutes and putting it back. It worked for a while but now it's dead. I changed the battery and it's still the same thing.
I searched around and found people suggesting flashing the TOT file. So I went to download mode (it used to go there ) tried flashing and I got an error. I don't recall the error to be honest.
Now the device won't boot and won't show the download mode screen. However, it gets recognized as "LGE AndroidNet USB Serial Port".
I tried the KDZ method and it doesn't work. The TOT method gives me the errors below:
When I use LGUP8974.dll
PID: NULL
IMEI: NULL
[ 9: 2:27] CrossDL [] to [D855]. SWersion[]
000000064
Error: [ 9: 2:27] CrossDL [] to [D855]. SWersion
When I use LGD855_20140526_LGFLASHv160.dll
PID: NULL
IMEI: NULL
Model :
DLL : D855
SWV :
SWOV :
Model Information Check FAIL !
I'm not sure how bad the situation is or what exactly I'm doing wrong. I tried searching and trying everything and none is working.
Notes:
I'm not sure if I'm using a proper TOT the one I'm using says (LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot)
Searching using my IMEI in a website resulted with the SW (D85530D_00)
have u resolved the issue ?
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!
Hi, I decided to write here, I hope you can help me out.
So today I tried to root my phone with the instructions found at https://forum.xda-developers.com/showpost.php?p=68696079&postcount=114
I checked that my build no. is S288, so with rooting there would be no data loss for me (I still backed up everything important of course)
First problem I came across was that I had to found how to download QFIL, I downloaded and installed version 1.0.0.2 I think.
Second was that I couldn't get the Qualcomm Com port to show in QFIL neither in Device Manager. I figured out that as well, by doing loads of research (googling)
I also installed ADB to help me get into the state where I see the Qualcomm port, because normally if I just power it off, and connect it to my PC, it powers on in the "charging interface"
So everything was working, I downloaded the P1a42_S288_160721_ROW_RAW_QFIL file, extracted it, filled in everything in the QFIL program and hit Download while holding the + & - buttons to enter TWRP mode or whatever it is called. It returned with this:
Code:
PROGRAM: Send raw data fail
Failed to write I:\Telefon Ment�sek\Lenovo Vibe P1\Root (2017,03,11)\P1a42_S288_160721_ROW_RAW_QFIL\recovery_twrp.img to the device
Download Fail:System.Exception: Failed to upload the emmc images to the phone using Firehose
...
Download Fail: FireHose Fail FireHose Fail
Finish Download
Sorry, I can't write down everything bc I already closed the program, so I'm writing these off of screenshots
I already tried other USB cables, other USB ports, other drivers, even other ROMS, but everytime I try, I get this message:
Code:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
So currently I can't power on the device in any way, tried holding + and -, + and power, - and power, home and power, home power and +, home power and -, home power + -
Please help me, I would be really glad Cheers!
Also, sorry if my English is a bit poor, I'm a 15 year old boy who's native speaking lang is not English
P.S. I also don't know if I broke my warranty with this or not, because I technically have not rooted the phone, just did something else. And also, what if someone would've stolen it and I would've got it back and I wouldn't be able to turn it on because the thieves have broken it? (That is not the case right now, just asking).
PS 2: I have an alarm at 0:00 today, but I doubt that the phone is just gonna magically turn itself on for the alarm, we'll see. I may also try to leave the phone to completely discharge (I remember now why I didn't want to buy a phone with a built-in battery)
EDIT: I didn't mention, that the first time I tried to flash, I was using files from a Directory that's path contains both spaces and unknown (?) characters (é) (only unknown by the software) as seen above in the first box.
gabor6505 said:
Hi, I decided to write here, I hope you can help me out.
So today I tried to root my phone with the instructions found at https://forum.xda-developers.com/showpost.php?p=68696079&postcount=114
I checked that my build no. is S288, so with rooting there would be no data loss for me (I still backed up everything important of course)
First problem I came across was that I had to found how to download QFIL, I downloaded and installed version 1.0.0.2 I think.
Second was that I couldn't get the Qualcomm Com port to show in QFIL neither in Device Manager. I figured out that as well, by doing loads of research (googling)
I also installed ADB to help me get into the state where I see the Qualcomm port, because normally if I just power it off, and connect it to my PC, it powers on in the "charging interface"
So everything was working, I downloaded the P1a42_S288_160721_ROW_RAW_QFIL file, extracted it, filled in everything in the QFIL program and hit Download while holding the + & - buttons to enter TWRP mode or whatever it is called. It returned with this:
Code:
PROGRAM: Send raw data fail
Failed to write I:\Telefon Ment�sek\Lenovo Vibe P1\Root (2017,03,11)\P1a42_S288_160721_ROW_RAW_QFIL\recovery_twrp.img to the device
Download Fail:System.Exception: Failed to upload the emmc images to the phone using Firehose
...
Download Fail: FireHose Fail FireHose Fail
Finish Download
Sorry, I can't write down everything bc I already closed the program, so I'm writing these off of screenshots
I already tried other USB cables, other USB ports, other drivers, even other ROMS, but everytime I try, I get this message:
Code:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
So currently I can't power on the device in any way, tried holding + and -, + and power, - and power, home and power, home power and +, home power and -, home power + -
Please help me, I would be really glad Cheers!
Also, sorry if my English is a bit poor, I'm a 15 year old boy who's native speaking lang is not English
P.S. I also don't know if I broke my warranty with this or not, because I technically have not rooted the phone, just did something else. And also, what if someone would've stolen it and I would've got it back and I wouldn't be able to turn it on because the thieves have broken it? (That is not the case right now, just asking).
PS 2: I have an alarm at 0:00 today, but I doubt that the phone is just gonna magically turn itself on for the alarm, we'll see. I may also try to leave the phone to completely discharge (I remember now why I didn't want to buy a phone with a built-in battery)
EDIT: I didn't mention, that the first time I tried to flash, I was using files from a Directory that's path contains both spaces and unknown (?) characters (é) (only unknown by the software) as seen above in the first box.
Click to expand...
Click to collapse
Dear Pls follow this link
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
You can see the qualcomm driver only when you switch off phone and hold Volume+/- plus power button.
I can't bc my phone won't turn on currently,
So I probably shouldn't have used ADB to get into fastboot or whatever, my phone may be broken because I tried to do the flash while in that state.
Did you read my whole post though?
The next thing I'll try then is uninstalling all the drivers and programs related to my phone, and then following the guide you suggested, because I still see the Qualcomm port, I just can't do anything with my phone.
OMG, I have waited a few hours, and just randomly thought why not try again flashing the rom (I don't think this is the right word for the QFIL Download procedure), and it worked! So I'm actually really happy I don't need to send it in to repair or try other things. I got the system I started the procedure with, so I didn't actually lost any of my files neither did I root my phone. Now to decide if I want to try again rooting it with the detailed instructions you sent or just leave it like this so I avoid getting into all this again. I think I will try again to root it lol why not
Will report back here if it was successful
I have successfully rooted my phone, and installed the Xposed Framework on my phone, so I'm really happy.
I can't really seem to find where to lock this thread so please someone lock this thread (I am not familiar with this forum, so I don't know if it is needed or not)