ERROR [328] : INVALID COMMAND when upgread to sprint ROM - Touch CDMA Windows Mobile ROM Development

Hi,
I am trying to upgrade the official sprint ROM on HTC Touch (RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship) On Current ROM : 3.02.651.2, Radio : 3.37.15
But I am getting ERROR [328] : INVALID COMMAND
Can somebody plz help me to thru this??

retesh101 said:
Hi,
I am trying to upgrade the official sprint ROM on HTC Touch (RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship) On Current ROM : 3.02.651.2, Radio : 3.37.15
But I am getting ERROR [328] : INVALID COMMAND
Can somebody plz help me to thru this??
Click to expand...
Click to collapse
Have you called Sprint to ask about this? Since your doing the official ROM update, they should have an answer for you.

You may want to try using a different pc. I got the same screen several times on my desktop. Tried it on my laptop and it worked just fine.

I’ve been able to resolve this on more than 1 occasion, I was able to resolve it by doing the following.
1. Create a new Windows Login/Profile with admin rights and a password.
2. Restart the computer
3. Login to the newly created windows account profile.
4. Place the device into boot loader (Tri-Color screen) you can do this by doing the following [Press and hold both the power button and the camera button, then press the reset button at the bottom]
5. Once the device is in boot loader mode (Tri-Color screen) plug the device into the PC you will notice that the bottom will change from “serial” to “USB”.
6. Once plugged in, download the official ROM update again from HTC’s website (Make sure you hit save and not run) then save it to the desktop so you know where it is at.
7. Once the download has completed run the ROM update again.

Related

"Un-brick" Imate JasJar After Failed ROM Update

First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Did like u said.
Still country id error
works now
thanks
my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?
help me
error 101 problem
error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?
please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,

How to restore service capability Asus P525?

During replacement ROM v.3.29 on v3.32 WWE.Build 06 the message has appeared "checksum error!" then the device "has hung" and more to load it was not possible...
At attempt of restoring with usage of buttons "record" + "reset" and "camera" + "record" + "reset" in a top of the display part there is a text - " 2006/08/28 09:47:01 " in the bottom of an empty advance - bar and in one second the display is filled by a pseudo-graphics (triangles, point …)
Correctly it is possible enter only the mode - " Photo+Record+Joistick_Action - USB Console mode ", thus there is a text:
Galaxy FlashRom Update
2006/08/28 09:47:01
Cpu version: PXA27x
USB Cable is connected
And in the bottom of an empty advance - bar.
Win XP at connection informs that "the Device USB is not authenticated "...
Please prompt as to restore service capability P525 with usage of this mode?
The service centre Asus in my city is not present...
Download the official ROM v3.32 in the Download section in Asus Website.
Try Re-upgrade
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
qwsr said:
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
Click to expand...
Click to collapse
Try the Sorg's Asus Simple rom with 84.5MB of Storage Space with instruction about how to update.
Read the topic here
http://forum.xda-developers.com/showthread.php?t=281393&highlight=simple+rom
and you can download the Simple Rom from here:
http://rapidshare.com/files/1238374/ASUS_P525_v3.32.WWE.simple.build.01.BLU.zip.html
works fine with me... so far
Unfortunately, bootloader has some strange bug which prevents to update ROM through usual procedure if OS ROM image is less than 32MB.
so you have to update it through bootloader instead through autorun.exe.
1) unpack everything to root of MiniSD
2) insert MiniSD to P525. Connect USB cable.
3) press "Camera" button and while holding it press shortly and release "reset". device will boot into ROM update mode.
4) release "camera" button.
5) follow on-screen instructions
P.S: if updater tells "incompatible language" then restart device and execute ASUS.UnlockLangID.exe. After that repeat from step 3.
P.P.S: If bootloader doesn't start update and tells "galaxy .nb0" not found then your bootloader is too old and doesn't support this method of update. Download latest ROM from ASUS site and update it. After that repeat this instruction again from step 1.
Sorg
Be careful, read the instructions and of course whatever you do yo, you do it an your own risk.

HTC Diamond ROM Updating problem - ERROR [294]: INVALID VENDOR ID

Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.
Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699
Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen
vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.
1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_
Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?
I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post
Try one more time with out any changes
omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.
help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.
touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....
help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....

ASUS P526 ROM Issues

Hi
I have an ASUS P526 and I had a problem of not being able to turn the PHONE function on.
The Communicaton Manager did not have the option to turn on the phone,
and I could not establish a USB connection to my PC via ActiveSync : It said "Cannot open UFN drivers"
I was using Windows Mobile 6.0
So I decided to flash the OS ROM. I downloaded SCHIST ROM v21864_clean and flashed the OS with the flash.dio.nb0 included in the download.
(i.e. I did not extract any flash.dio.nb0 files from my own ROM)
Now, when I turn on the phone, I get the Windows Mobile 6.5 SCHIST ROM 21864 clean screen and cannot log on to windows.
This is probably because I tried to flash an ASUS P526 with ASUS P527 ROM, but I could not find any other ROM to flash with.
When I download the original P526 ROM from the ASUS Website
(e.g. V618_WWE_Turkey_EXT_V158 ), I get a P526.pim file, but PIMSPLIT.EXE does not extract any " *.nb0 " files when I drag P526.pim onto it..
I am totally confused as to what to do at this point..
Please help!
I just want to be able to use Windows Mobile 6.0 , 6.1 or 6.5 with the phone, and be able to use the phone function, as well...
PS: The only way for me to flash the ROM on the phone, is with the SD card method, because ActiveSync does not work.
Hi
Tell me one thing, if you make a Softreset and click the OK button on the left will be in bootloader?
If so something can be done without sd.
The procedure is done using a ROM file.nbo, but first you must unlock the phone ...
Let me know and we'll see
Excuse my English
What do you mean Active Sync does not work? Is it a mechanical problem or a program incompatibility?
Try this: this is Expert mode in installing the Turkey ROM (or any other language).
Warning: Do this at your own risk! If not done right you might brick your phone! I will not be responsible for any damage done to your phone.
1.Make sure battery is fully charged.
2. connect your devide to PC using USB cable.
3. Run the ROM upgrade program you downloaded from ASUS site,
4. On the top bar of the installation window, "right click". A window will appear with the option "Expert Mode". Click on that. A message will appear in the window about connect USB or something (I'm sorry but I cannot remember the exact message since I have not done this in a long time).
5. Now you have to go to bootloader mode in your P526. Do this by pressing and HOLDING on the OK button <rocker switch on the left side> then press reset button <continue hoding down the rocker switch>. Your unit should go to the blue ASUS screen and a message will appear about being in USB mode or cable something <again I'm sorry I cannot remember exact message>.
6. If this appears then press the <Update> button on the installer window. This should start the installation proces.
Hope this helps. if you have any other questions or if this does not work please feel free to post again.
thanks for your good information
regards
ferdiebaq said:
What do you mean Active Sync does not work? Is it a mechanical problem or a program incompatibility?
Try this: this is Expert mode in installing the Turkey ROM (or any other language).
Warning: Do this at your own risk! If not done right you might brick your phone! I will not be responsible for any damage done to your phone.
1.Make sure battery is fully charged.
2. connect your devide to PC using USB cable.
3. Run the ROM upgrade program you downloaded from ASUS site,
4. On the top bar of the installation window, "right click". A window will appear with the option "Expert Mode". Click on that. A message will appear in the window about connect USB or something (I'm sorry but I cannot remember the exact message since I have not done this in a long time).
5. Now you have to go to bootloader mode in your P526. Do this by pressing and HOLDING on the OK button <rocker switch on the left side> then press reset button <continue hoding down the rocker switch>. Your unit should go to the blue ASUS screen and a message will appear about being in USB mode or cable something <again I'm sorry I cannot remember exact message>.
6. If this appears then press the <Update> button on the installer window. This should start the installation proces.
Hope this helps. if you have any other questions or if this does not work please feel free to post again.
Click to expand...
Click to collapse
my phone fails to complete the upgrade and did not able to boot. I tried to do a hard reset, but the same thing.. please help

Sense 2.5 help

Hey I would like to have sense 2.5 on my tilt too, but i really have no clue where to download it or start, help plz
I've read all the howtos and I tried flashing a 2.5 rom i found(i think its the right kind) and I keep getting error 262
Did you flash hardspl? What rom are you trying to flash? I suggest trying energy rom leo.
If by flash you mean download and run it on my computer then yes and the energy leo is the one i tried
When I click on the leo customRUU I get "windows cannot acces the specified path device of file. you may not have the appropriate permission to access this file "
http://forum.xda-developers.com/showthread.php?t=550540
I alrdy read that a few times over
"Flashing via ActiveSync with USB Lead (thanks to OliNex)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable and it must not be in Flight/Airplane mode (i.e. radio should be on)
3. NEW: Internet access is required as the program checks online for updates and license
4. Run Rhodium-HardSPL_V2_00R3.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). XP requires Admin logon and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, allow it. If you get an AntiVirus warning please ignore it, it contains no harmful code (just used a packer to compress it)
5. Follow steps as prompted in the HardSPL program. If this is the first run of HardSPL on a device after Hard Reset, you must select Automatic Flash Mode (first button in Welcome Screen)
NOTE: You should usually go for Automatic Flash Mode. The Manual Flash option is only to be used as noted below and you must only attempt the Manual Mode option if Automatic Flash Mode or SSPL-Manual.exe already put device in black screen. Any other errors triggered while running in Autoflash Mode will have to be fixed as instructed in the error message.
6. It will ask you to wait while it prepares for the flashing, press OK
7. Now it should go through without any error messages, if one does pop up then follow the instructions included in the error text. If no specific instruction is shown then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred)
8. At this point the phone hopefully went to a black screen (reporting version as 1.01.C-SSPL only using "info 7" in mtty), this is the SSPL version, which is temporary. Then RUU will instantly launch
9. NOTE: When RUU says it will Hard Reset do not worry, it is not going to do that. Also when it says the flash will take 10 minutes ignore that, it will only take a minute or so
10. SPL flashes, device automatically reboots, job done"
So im here asking for help
did you download the package from "here" in the directions first and flash that before going onto a custom rom like nrg's?
yes i did.....
never ran into any problems myself so i dont know whats up but have you tried on another computer? flashed through sd card?
Dragonmaster0430 said:
Hey I would like to have sense 2.5 on my tilt too, but i really have no clue where to download it or start, help plz
Click to expand...
Click to collapse
Ok, which device are trying to flash? Does tilt too mean "Tilt 2" or "tilt also"? If you are talking about a Tilt, you are in the wrong forum. This is Tilt 2 (Touch Pro 2/Rhodium).
WillardZ said:
Ok, which device are trying to flash? Does tilt too mean "Tilt 2" or "tilt also"? If you are talking about a Tilt, you are in the wrong forum. This is Tilt 2 (Touch Pro 2/Rhodium).
Click to expand...
Click to collapse
Wow...i mean tilt 2 ... XD
Dragonmaster0430 said:
Hey I would like to have sense 2.5 on my tilt too, but i really have no clue where to download it or start, help plz
Click to expand...
Click to collapse
i had this pb a few time ago, and as I remember, I solved it just by changing the folder where RRU AND NBH files where. try installing from an other folder...don't know why it works for me

Categories

Resources