Subsystem Crash! HELP! - LG Optimus G (International)

So tonight I was bored and wanted to try a new rom, I backed up my current Pacman rom, and went to install rootbox, installation finished succesfully, but when the rom was booting, the bootanimation froze, and suddendly I got this Blue Screen saying the following:
Subsystem Crash!
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash! : External_modem (Undefined error)
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
and just below this there are like 8 lines of pure random letters and symbols like "\Zp0ieKjmKxp {(<--51m<rZ--mZi.p0.mKp0x" etc etcetc
So I wiped everything(including format system) and tried reinstalling the rom, got the same result.
Wiped everything again and restored my nandroid backup of PacMan ROM, SAME THING HAPPENED, SAME ERROR ON BOOTANIMATION OF MY PREVIOUS ROM.
So I went ahead and wiped everything again! but now I restored the Stock LG 4.1.2 rom nandroid backup I had from last week, it booted just fine, but the phone didnt reognize my sim card, and after like 3 minutes botted The screen turned off and THE SAME ERROR APPEARED, but this time saying "Kernel Crash!"
Rebooted and the phone booted again just fine, and after like 5 minutes AGAIN SUBSYSTEM CRASH! it ends up happening every time.
The phone boots into recovery, fastboot, download mode, just fine.
I just have no idea on what to do now, I've googled everything but I have found no solutions or helpful information whatsoever, I don''t know what I did wrong, please guys I hope you can help me with this one, I cannot afford a new phone right know, thanks!
EDIT1: After different attempts with wiping and flashing roms and restoring backups with no luck, I was able to boot in my pacmanrom by flashing a different kernel, specifically, Kite Kernel 30, with this kernel the rom boots and it works just fine, although I got a couple of random reboots without the error previously pointed, but the problem is that MY PHONE DOESN'T RECOGNIZE MY SIM CARD ANYMORE, No matter what I do, pull it out pull it in, the phone doesnt even do anything, is like nothing is happening, I have wifi signal but no sim recognition.
Im trying to understand what this problem is all about, how flashing a different kernel made the rom boot? With Kite kernel it boots, but when i flash the old f93 kernel I used for weeks the phone wont boot, i get the same error in the bootanimation.
Please I need some feedback on this, this forum is so dead :S

Can you try kdz back to stock? If it happens after that then send it on repair, as long as you kdz back they can't see what you have done.

Man I live in freakin Venezuela, If I send my phone to LG, best case scenario im gonna get it back(or replaced) in like 3 months -_- I need to fix this on my own

So I used the KDZ to go back to stock firmware, and the phone boots, but in reboots all the time and my sim card is not recognized! Man did I screw up my device so hard?

LRC1710 said:
So tonight I was bored and wanted to try a new rom, I backed up my current Pacman rom, and went to install rootbox, installation finished succesfully, but when the rom was booting, the bootanimation froze, and suddendly I got this Blue Screen saying the following:
Subsystem Crash!
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash! : External_modem (Undefined error)
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
and just below this there are like 8 lines of pure random letters and symbols like "\Zp0ieKjmKxp {(<--51m<rZ--mZi.p0.mKp0x" etc etcetc
So I wiped everything(including format system) and tried reinstalling the rom, got the same result.
Wiped everything again and restored my nandroid backup of PacMan ROM, SAME THING HAPPENED, SAME ERROR ON BOOTANIMATION OF MY PREVIOUS ROM.
So I went ahead and wiped everything again! but now I restored the Stock LG 4.1.2 rom nandroid backup I had from last week, it booted just fine, but the phone didnt reognize my sim card, and after like 3 minutes botted The screen turned off and THE SAME ERROR APPEARED, but this time saying "Kernel Crash!"
Rebooted and the phone booted again just fine, and after like 5 minutes AGAIN SUBSYSTEM CRASH! it ends up happening every time.
The phone boots into recovery, fastboot, download mode, just fine.
I just have no idea on what to do now, I've googled everything but I have found no solutions or helpful information whatsoever, I don''t know what I did wrong, please guys I hope you can help me with this one, I cannot afford a new phone right know, thanks!
EDIT1: After different attempts with wiping and flashing roms and restoring backups with no luck, I was able to boot in my pacmanrom by flashing a different kernel, specifically, Kite Kernel 30, with this kernel the rom boots and it works just fine, although I got a couple of random reboots without the error previously pointed, but the problem is that MY PHONE DOESN'T RECOGNIZE MY SIM CARD ANYMORE, No matter what I do, pull it out pull it in, the phone doesnt even do anything, is like nothing is happening, I have wifi signal but no sim recognition.
Im trying to understand what this problem is all about, how flashing a different kernel made the rom boot? With Kite kernel it boots, but when i flash the old f93 kernel I used for weeks the phone wont boot, i get the same error in the bootanimation.
Please I need some feedback on this, this forum is so dead :S
Click to expand...
Click to collapse
what is phone model? E975 or 973?

geoworld_200 said:
what is phone model? E975 or 973?
Click to expand...
Click to collapse
E977

Just stating a probability here. But not sure. Maybe its not that ur phone isn't recognising the sim. Maybe u just have the wrong radios. Try flashing a radio for ur model.
Sent from my LG-E975 using xda app-developers app

I'm getting this:
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
I've been using CM10.1 for 1 month since I bought my Optimus G and it was great. No crashes and it was a joy to use. Today I started getting this message with the phone rebooting itself after a couple of seconds. I tried a wipe and flash CM10.1 again from scratch but I cannot get it fixed. The phone keeps rebooting over and over again. Now I'm trying to flash the stock rom but it doesn;t work as the phone keeps rebooting all the time. The LG support tool doesn't even connect to it long enough. Any suggestions?

edvar said:
I'm getting this:
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
-------------------------------------------------------------------------------------------------------
I've been using CM10.1 for 1 month since I bought my Optimus G and it was great. No crashes and it was a joy to use. Today I started getting this message with the phone rebooting itself after a couple of seconds. I tried a wipe and flash CM10.1 again from scratch but I cannot get it fixed. The phone keeps rebooting over and over again. Now I'm trying to flash the stock rom but it doesn;t work as the phone keeps rebooting all the time. The LG support tool doesn't even connect to it long enough. Any suggestions?
Click to expand...
Click to collapse
Dude I managed to flash the stock ROM in download mode with the tool but the phone had the same issue, kept rebooting no matter what I did , tried everything and nothing solved it, took it to warranty and they fixed it by replacing the logic board...
Enviado desde mi LG-E975 usando Tapatalk 4

LRC1710 said:
Dude I managed to flash the stock ROM in download mode with the tool but the phone had the same issue, kept rebooting no matter what I did , tried everything and nothing solved it, took it to warranty and they fixed it by replacing the logic board...
Enviado desde mi LG-E975 usando Tapatalk 4
Click to expand...
Click to collapse
What tool did you use? I'm trying to flash stock so I can get it fixed using the warranty

edvar said:
What tool did you use? I'm trying to flash stock so I can get it fixed using the warranty
Click to expand...
Click to collapse
Used the LG oficial tool, but put the phone in download mode first

The phone goes in download mode fine but the LG Tool doesn't recognize it's connected. I tried to use this other tool http://forum.xda-developers.com/showthread.php?p=44186257 but the phone just restarts into fastboot and doesn't do anything.
I forgot to mention I used this tool before to try and re-flash CM10: http://forum.xda-developers.com/showthread.php?t=2230994 . Now I don't even get the LG logo at boot anymore, just a Google logo.

edvar said:
The phone goes in download mode fine but the LG Tool doesn't recognize it's connected. I tried to use this other tool http://forum.xda-developers.com/showthread.php?p=44186257 but the phone just restarts into fastboot and doesn't do anything.
I forgot to mention I used this tool before to try and re-flash CM10: http://forum.xda-developers.com/showthread.php?t=2230994 . Now I don't even get the LG logo at boot anymore, just a Google logo.
Click to expand...
Click to collapse
UPDATE:
I managed to install stock using the KDZ Updater. When it begins the process the phone reboots into fasboot and I guess the KDZ Updater doesn't know what do to after that. With the KDZ Updater still running on the computer I just disconnected the phone and put it back in Download Mode. After that KDZ Updater started to do its thing and re-flashed stock! Now I can send the phone for repair and use the warranty

I have same issues with my LGE-975, EU version.
This can happen once per month. Or 10 times a day
It's clean install, did it two times just to be sure. Updated baseband from 10b to 10d. So now it's
LGE975AT-00-V10d-EUR-XX-APR-01-2013+0
CM 10.1.2-e975
kernel 3.4.0-CM+ [email protected] #1 Thu Jul 11 18:03:45 PDT 2013
buildnumber cm_e975-userbug 4.2.2 JDQ39E
eng.jenkins.20130711.175036 test-keys
The only trace in logs seems to be this (from last_kmsg):
pmmSendInitPowerSaveMsg: 615: Beacon count is zero, can not retrieve the TSF, failing the Enter Bmps Request
[10015.935661 / 08-12 21:41:00.454]
[10015.935722 / 08-12 21:41:00.454] [WLAN][706:E E ] pmmInitBmpsPwrSave: 485: pmmBmps: Init Power Save Request Failed: Sending Response: 1
[10015.935753 / 08-12 21:41:00.454]
[10015.935844 / 08-12 21:41:00.454] [WLAN][706:E :SME] pmcProcessResponse: 1367: Response message to request to enter BMPS indicates failure, status 235
[10015.935875 / 08-12 21:41:00.454]
[10016.935509 / 08-12 21:41:01.455] [WLAN][706:E E ] pmmSendInitPowerSaveMsg: 615: Beacon count is zero, can not retrieve the TSF, failing the Enter Bmps Request
[10016.935539 / 08-12 21:41:01.455]
[10016.935600 / 08-12 21:41:01.455] [WLAN][706:E E ] pmmInitBmpsPwrSave: 485: pmmBmps: Init Power Save Request Failed: Sending Response: 1
[10016.935631 / 08-12 21:41:01.455]
[10016.935692 / 08-12 21:41:01.455] [WLAN][706:E :SME] pmcProcessResponse: 1367: Response message to request to enter BMPS indicates failure, status 235
------------------------------------------------- Lines above are OK----------------------------------------------------
aaand now goes bang...
[10016.935722 / 08-12 21:41:01.455]
[10017.007628 / 08-12 21:41:01.525] mdm_errfatal: Reseting the mdm due to an errfatal
[10017.007689 / 08-12 21:41:01.525] subsys-restart: subsystem_restart_dev(): Restart sequence requested for external_modem, restart_level = 1.
[10017.007781 / 08-12 21:41:01.525] Kernel panic - not syncing: subsys-restart: Resetting the SoC - external_modem crashed.
[10017.007903 / 08-12 21:41:01.525] [<c0014478>] (unwind_backtrace+0x0/0x11c) from [<c084be9c>] (panic+0x90/0x1d8)
[10017.007995 / 08-12 21:41:01.525] [<c084be9c>] (panic+0x90/0x1d8) from [<c005c320>] (subsystem_restart_dev+0x134/0x174)
[10017.008056 / 08-12 21:41:01.525] [<c005c320>] (subsystem_restart_dev+0x134/0x174) from [<c0079cc4>] (mdm_errfatal+0x6c/0x88)
[10017.008147 / 08-12 21:41:01.525] [<c0079cc4>] (mdm_errfatal+0x6c/0x88) from [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290)
[10017.008239 / 08-12 21:41:01.525] [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290) from [<c00cf544>] (handle_irq_event+0x3c/0x5c)
[10017.008300 / 08-12 21:41:01.525] [<c00cf544>] (handle_irq_event+0x3c/0x5c) from [<c00d1dcc>] (handle_edge_irq+0x12c/0x168)
[10017.008361 / 08-12 21:41:01.525] [<c00d1dcc>] (handle_edge_irq+0x12c/0x168) from [<c00ceba4>] (generic_handle_irq+0x2c/0x40)
[10017.008452 / 08-12 21:41:01.525] [<c00ceba4>] (generic_handle_irq+0x2c/0x40) from [<c025a90c>] (msm_summary_irq_handler+0x7c/0xbc)
[10017.008514 / 08-12 21:41:01.525] [<c025a90c>] (msm_summary_irq_handler+0x7c/0xbc) from [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290)
[10017.008575 / 08-12 21:41:01.525] [<c00cf328>] (handle_irq_event_percpu+0xb0/0x290) from [<c00cf544>] (handle_irq_event+0x3c/0x5c)
[10017.008666 / 08-12 21:41:01.525] [<c00cf544>] (handle_irq_event+0x3c/0x5c) from [<c00d2004>] (handle_fasteoi_irq+0xdc/0x148)
[10017.008727 / 08-12 21:41:01.525] [<c00d2004>] (handle_fasteoi_irq+0xdc/0x148) from [<c00ceba4>] (generic_handle_irq+0x2c/0x40)
[10017.008788 / 08-12 21:41:01.525] [<c00ceba4>] (generic_handle_irq+0x2c/0x40) from [<c000ede0>] (handle_IRQ+0x7c/0xc0)
[10017.008849 / 08-12 21:41:01.525] [<c000ede0>] (handle_IRQ+0x7c/0xc0) from [<c00085d0>] (gic_handle_irq+0x94/0x110)
[10017.008910 / 08-12 21:41:01.525] [<c00085d0>] (gic_handle_irq+0x94/0x110) from [<c0859500>] (__irq_svc+0x40/0x70)
[10017.008971 / 08-12 21:41:01.525] Exception stack(0xc0e05f28 to 0xc0e05f70)
[10017.009002 / 08-12 21:41:01.525] 5f20: 00000000 00000000 00000001 00000000 00000000 00000000
[10017.009063 / 08-12 21:41:01.525] 5f40: c0e58108 00000003 00000000 c0e58108 00000000 00000000 00000000 c0e05f70
[10017.009093 / 08-12 21:41:01.525] 5f60: c00ee2a4 c005de64 60000013 ffffffff
[10017.009185 / 08-12 21:41:01.525] [<c0859500>] (__irq_svc+0x40/0x70) from [<c005de64>] (msm_cpuidle_enter+0x70/0x78)
[10017.009246 / 08-12 21:41:01.525] [<c005de64>] (msm_cpuidle_enter+0x70/0x78) from [<c04bce70>] (cpuidle_enter+0x14/0x18)
[10017.009307 / 08-12 21:41:01.525] [<c04bce70>] (cpuidle_enter+0x14/0x18) from [<c04bd3f0>] (cpuidle_idle_call+0x1e0/0x3c0)
[10017.009399 / 08-12 21:41:01.525] [<c04bd3f0>] (cpuidle_idle_call+0x1e0/0x3c0) from [<c000f3c4>] (cpu_idle+0x88/0xf0)
[10017.009460 / 08-12 21:41:01.525] [<c000f3c4>] (cpu_idle+0x88/0xf0) from [<c082b508>] (rest_init+0x88/0xa0)
[10017.009551 / 08-12 21:41:01.525] [<c082b508>] (rest_init+0x88/0xa0) from [<c0d008b4>] (start_kernel+0x428/0x490)
[10017.110726 / 08-12 21:41:01.525] wcnss_8960: crash shutdown : 0
[10017.411443 / 08-12 21:41:01.525] Rebooting in 5 seconds..
[10022.420630 / 08-12 21:41:01.525] Going down for restart now
[10022.420661 / 08-12 21:41:01.525] pm8921_turn_on_19p2mhz_clk: Kick Start
[10022.420752 / 08-12 21:41:01.525] check battery fet
[10022.420813 / 08-12 21:41:01.525] pm_chg_batfet_get: get CHG_BATFET_ON=0

DemiGod Crash Handler : critical error LG G2 F320L, please help me?
DemiGod Crash Handler : critical error
Press key to choose Dload Mode/Reboot/Fastboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
3) Power : Fastboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QCT's Memory Debug App.
3) Send e-mail to contact point ....
no imei, no download mode, no recovery, can't KDZ, can't use plash tool,

Related

[Q] Baseband unknown. Might want to read at least

I just got the G4 and I was playing around with it with all the menus. and I went into *#9090# and choose DM/RMNET/.. Over HS-USB. After it rebooted the baseband went unknown :/. Anyone know how to get it back? I tried flashing stock ROM and a master reset through recovery. Any idea at all?
I just realized what is wrong but I don't know how to turn it back without the modem gets fully loaded. This is the log from the modem
05-12 16:15:38.519 528 528 E RIL-QC-NETMGR: ifioctl: open port failed: (13)Permission denied
05-12 16:15:38.519 528 528 E RIL-QC-NETMGR: netmgr_kif_ifioctl_open_port() failed for rmnet_usb0 on attempt 26
it seem like the QC is does not allow rmnet to open port on the usb. So turning it on will kill the modem :/. since modem is not fully loaded there is no imei and no baseband, however all data and files are correct so flashing is no good. anyone know how to change the setting back or maybe it is something in a file I can edit to change it back? any advice will help. Thanks

[Q] Help Needed with Semi-Bricked E975 Optimus G

Hey guys,
So I just got an Optimus G today ... and really wanted to get rid of LG's software and get Cyanogen on it. I have had Androids before and had a fair idea about what I was getting myself into.
But ... well ...
I rooted it and flashed a new recovery without unlocking the bootloader Yepp... silly!
This resulted in a Secure Booting Error. Cause: boot certification verify
I googled around a bit and figure that I can fix this by flashing the stock firmware using a KDZ Updater ... so I started down that path.
1. Downloaded the KDZ Updater from here .. http://forum.xda-developers.com/showpost.php?p=44874388&postcount=36
2. And a firmware KDZ file from here http://lg-phone-firmware.com/index.php?id_mod=20 ... it was 1.08 GB.
3. Now when I tried to update - it basically gave me an extracting error
4. More googling led to me figuring out that this is because my Firmware file is over 1 Gig! So I did this method next, http://forum.xda-developers.com/showthread.php?t=2388440
5. This led to me downloading a Flashing tool etc. and an all important LG Mobile Support Tool B2CAppSetup.exe.
6. The flashing tool does not work unless the LG Mobile Support tool has been installed. And herein lies the problem, I cannot install this tool for everytime it gives me a small popup saying "TO CHECK FOR SOFTWARE UPGRADES YOU NEED TO CONNECT YOUR PC TO THE INTERNET, AND PRESS CONTINUE"
I am on Win 7 Pro x64 ... and have tried all compatibility modes etc ... The drivers are installed properly and working. Windows makes a ding noise when I plug my phone in The phone is able to go into download mode etc. So I think things aren't too bad ... but ... I can't figure out how to install LG Mobile Support tool/B2CAppSetup.exe
I think the reason may be that this file communicates with a server at http://cmsg.lgmobiles.com/ or something like that to get the latest firmware - but LG may have taken that site down - which is also a reason why I had to download the firmware KDZ file from a third party website because all links to the LG websites were down. This may just be a hunch ... but its all I have for now.
Can anyone help? Thanks much appreciated.
[UPDATE]
Managed to get it to work, all I had to do was disable Windows firewall and open port 9002 on my router.
But there is yet another problem. When I try to use the flashtool I get the following error:
11:02:23 : *****GetPhoneType Start*****
11:02:31 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
11:02:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:02:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:02:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:02:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Any help with this?
[email protected] said:
Managed to get it to work, all I had to do was disable Windows firewall and open port 9002 on my router.
But there is yet another problem. When I try to use the flashtool I get the following error:
11:02:23 : *****GetPhoneType Start*****
11:02:31 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_CheckPhoneType() Error)
11:02:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:02:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:02:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:02:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Any help with this?
Click to expand...
Click to collapse
as you didnt unlock your bootloader .. you can use lg software upgrade tool ..just press upgrade recovery.......it will download the rom and will flash itself....... dont need to worry bro... if your phone didnt boot just connect the phone to pc... and then power it on holding volume up and down simultaneously. you will enter download mode... then run software upgrade tool... your phone will be detected.. then go to upgrade recovery.... it worked for me.. hope works for you too..

LG G3:D855; Subsystem Crash! = Blue Screen and Unhappiness :(

Pretty much what the title says. My phone blue screens. This is the third time that it's happened in the past week...and I first installed it last week...lol
Got an LG G3 D855
Latest version of Paranoid Android
Did a completely clean install: using TWRP, wiped all available partitions, then flashed PA zip.
The first time it happened was the day I installed. I just kinda shrugged it off and went ahead with making it mine. And it happened earlier today and I went ahead and ignored that too. It just happened a third time (few hours after the second time; exact time after is shown below by uptime).
When it blue screened it gave me the following message on screen (without the astrisks)
*****************************
---------------------------------------------------------------------------------------
Subsystem Crash! : modem (susbsys-restart Resetting the SoC)
---------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash ! : modem (subsys-restart: Resetting the SoC)
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration
---------------------------------------------------------------------------------------
Board Info
rev.:1.0 speed,pvs: 3,7 serial : muhSerial
---------------------------------------------------------------------------------------
ERR crash log report. Version 3
Error in file wl1trm.c, line 404
Error message: WL1TRM: wl1_trm_grant_callback: Invalid Parameter(%d %d %d)
Time of crash(m-d-y h:m:s): 8-14-2015 21:32:46
Uptime (h:m:s): 5:12:38
Build ID: MPSS.DI.2.0.1.c1.13-0046-M8974AAAAANPZM-1
param: (0x5, 0x0, 0x0)
aux_msg:
qsdm_dbg_msg:
*****************************
Also, from what I've been able to find out, I think that that file might have something to do with radio functions, but I can't be sure because I just did a quick search.
Help would be greatly appreciated!
You should look in your device forum for help on this. I don't think it's a ROM specific issue. I'm pretty sure its a device specific issue
Try to Flash official stock Rom via KDZ or TOT&DLL method.

LG leon LTE - I can't get it into stock

I have rooted my lg using this instruction, but i have not had polish language and my SIM card has got locked (so i can't call or sent SMS, or use mobile data). I thought that i can get it into stock using ubricking manual, but when i did my phone got bootloop, he was stucked on LG logo all the time and restarting itself. When I follow rooting instructions again it comes back to first problem with calling etc.:crying:
So to sum up i cannot call or use my SIM card otherwise.
I also tried to unlock my device following LG tutorials, but i always get stuck on 'fastboot ode device-id [waiting for device]' without any results of this command, just servelar minutes of waitnig.
news - Now on the stock version I can't even get my phone into dwonload mode, it says then:
[470] fastboot_init()
[470] Loading keystore failed status 5 [580] USB init ept @ 0x8f1df000
[590] udc_start()
[700] -- reset --
[700] -- portchange --
[740] -- reset --
[740] -- portchange --
[830] fastboot: processing commands
download mode works fin on laptop

[HELP] D855 Doesn't show download mode & Doesn't flash

Greetings
So now I have completed two months of trials trying to fix this thing. I figured it's time to post something.
I have an LG G3 D855 32GB GCC (As it says on the box). The device was not booting so I tried removing the battery for a couple of minutes and putting it back. It worked for a while but now it's dead. I changed the battery and it's still the same thing.
I searched around and found people suggesting flashing the TOT file. So I went to download mode (it used to go there ) tried flashing and I got an error. I don't recall the error to be honest.
Now the device won't boot and won't show the download mode screen. However, it gets recognized as "LGE AndroidNet USB Serial Port".
I tried the KDZ method and it doesn't work. The TOT method gives me the errors below:
When I use LGUP8974.dll
PID: NULL
IMEI: NULL
[ 9: 2:27] CrossDL [] to [D855]. SWersion[]
000000064
Error: [ 9: 2:27] CrossDL [] to [D855]. SWersion
When I use LGD855_20140526_LGFLASHv160.dll
PID: NULL
IMEI: NULL
Model :
DLL : D855
SWV :
SWOV :
Model Information Check FAIL !
I'm not sure how bad the situation is or what exactly I'm doing wrong. I tried searching and trying everything and none is working.
Notes:
I'm not sure if I'm using a proper TOT the one I'm using says (LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot)
Searching using my IMEI in a website resulted with the SW (D85530D_00)
have u resolved the issue ?

Categories

Resources