Hi
I was Install UNOFFICIAL ROM Bada 2 to My S8500 But there are a lot of problems .
So I decided to re-install the official version of the old but I can't Because of this error message appears when you attempt Flashing the official rom .
'Error : Amms Write [0.2s]' .
Is there a solution? .
This is the way in which I Flashing ROM .
1- use Downloader v5.67
2-Select ( LSI Mode ) + Full Download .
3-Access to the download Mode .(Press Voul .Down + Power + Lock key )At the same time .
4-And finally Click (DOWNLOAD) from Loader .
What happens is only this message appears 'Error : Amms Write [0.2s]' . .
Majdi star
hello
what's your old firmware version ?
are you shure it's a full version or only an update ? you need in first a full version if you want to come back in bada 1
Make sure Kies is closed before you flash.
Is still an ongoing problem
Did not solve the problem now to the same previous error message returned and appeared again .
Is there another way to solve this problem ?
thank you .
Majdi star
hummm
it seems your device driver
try to remove it
install again
put your mobile in download mode
connect your mobile via usb (without multiloader)
wait till your computer search and install the driver (win7)
disconnect
now try to do the steps of flashing
edit:charge your mobile
Hi , I'm not really new here, only I've been reading quite a while whithout subscribing.
I live in the netherlands, work as boat mechanic.
My phone is LG C660 optimus pro, became slow and wifi got an error, won't turn on anymore, suddenly.
I tried to move to cyanomod, mainly to see whether it would fix wifi error, and I had cyanomod previously on my sony ericsson experia mini pro.
at the moment I have to use the sony again,
my LG C660 optimus pro is near bricked...
I did root it, went fine, ran clockworkmod recovery, also fine, then I tried to put on cyanomod stable version through MOD manager, went wrong somehow,
I now only get LG logo and it stays there.(it does get into emergency mode)
tried to reflash original using KDZ updater, program runs, have the firmware, finds connection witch my phone only if in emergency mode
(got modem disabled in system of windows)
KDZ starts working but errors and phone has no change
here's the log from KDZ :
22:10:02 : Launching SW update
22:10:02 : Unpacking KDZ
22:10:09 : KDZ file extraced
22:10:19 : Files were extracted.
22:10:19 : LGMobileDL Load.
22:10:19 : Port = -1
22:10:19 : Connecting to phone
22:10:29 : Check Phone mode = 1
22:10:47 : Phone type check.......
22:10:51 : LGMobileDL.DLL Loading....
22:10:51 : _SetAuthMark Fail
22:10:51 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:10:51 : _SetAuthMark Fail
22:10:51 : LoadCDMAPhoneData() Error
22:10:52 : GetProcAddress Error(127)
22:10:54 : ===FINISHED===
CAN ANYONE HELP ???
Hi,
I have an LG P930 sitting on my desk that has a completely unresponsive touch screen. Here's the background information:
person says he ran an OS update for his Bell P930 to take it from GB to ICS;
right after the upgrade, the screen does not respond and can't unlock the phone because the phone doesn't respond to his pressing on the screen;
he thought his digitizer had suddenly failed so he installed a replacement digitizer and the phone still doesn't respond to button presses;
he Googled and saw that some people had this problem after an OS upgrade but couldn't figure out how to load another OS;
I got the phone and tried a couple of unbricking guides and loaded the AT&T 18f rom onto the phone;
the AT&T 18f flash was successful, phone rebooted to the setup screen, but pressing on the language, next, or emergency call button does nothing; and
the volume and power buttons work.
Since it doesn't work with the original and replacement digitizer, could it be the motherboard itself or is the software messed up? I'm not sure what else to try since a P930 motherboard would be too expensive.
Update:
I tried installing a Bell rom via LG updater tool. It downloads, installs, but the phone hangs at the boot screen with the LG logo when I restart.
I then used the exe found in Hereric's unbrick package and it loads onto the phone but, at the setup screen, every button I press doesn't work.
I then tried using the LG updater tool and changed the country to USA, it updates to v10f, restarts, but doesn't boot to the setup screen and just hangs at the LG logo.
Any information would be appreciated.
Thank you.
audit13 said:
Hi,
I have an LG P930 sitting on my desk that has a completely unresponsive touch screen. Here's the background information:
person says he ran an OS update for his Bell P930 to take it from GB to ICS;
right after the upgrade, the screen does not respond and can't unlock the phone because the phone doesn't respond to his pressing on the screen;
he thought his digitizer had suddenly failed so he installed a replacement digitizer and the phone still doesn't respond to button presses;
he Googled and saw that some people had this problem after an OS upgrade but couldn't figure out how to load another OS;
I got the phone and tried a couple of unbricking guides and loaded the AT&T 18f rom onto the phone;
the AT&T 18f flash was successful, phone rebooted to the setup screen, but pressing on the language, next, or emergency call button does nothing; and
the volume and power buttons work.
Since it doesn't work with the original and replacement digitizer, could it be the motherboard itself or is the software messed up? I'm not sure what else to try since a P930 motherboard would be too expensive.
Update:
I tried installing a Bell rom via LG updater tool. It downloads, installs, but the phone hangs at the boot screen with the LG logo when I restart.
I then used the exe found in Hereric's unbrick package and it loads onto the phone but, at the setup screen, every button I press doesn't work.
I then tried using the LG updater tool and changed the country to USA, it updates to v10f, restarts, but doesn't boot to the setup screen and just hangs at the LG logo.
Any information would be appreciated.
Thank you.
Click to expand...
Click to collapse
hey buddy my nitro did the same thing. its root and unlocked so i can install any rom, but the touch doesnt work. even unbricked it twice. installed almost every rom.. boots up but when it gets to the langauge the next button it wont work. so i use my exhibit 4g now. the lg nitro is a nice phone but kinda sucks because of force closes and random restarts. exhibit 4g and aoip is flawless. i'm kinda glad it happened but if u find a fix holla..
Nitro Lopez said:
hey buddy my nitro did the same thing. its root and unlocked so i can install any rom, but the touch doesnt work. even unbricked it twice. installed almost every rom.. boots up but when it gets to the langauge the next button it wont work. so i use my exhibit 4g now. the lg nitro is a nice phone but kinda sucks because of force closes and random restarts. exhibit 4g and aoip is flawless. i'm kinda glad it happened but if u find a fix holla..
Click to expand...
Click to collapse
I'm still searching for an answer with no luck. I may have to take it to a service centre and pay the diagnostic fee.
Did your phone become unresponsive after a software update? If not, how did it happen. I'm curious.
Thanks for sharing.
audit13 said:
I'm still searching for an answer with no luck. I may have to take it to a service centre and pay the diagnostic fee.
Did your phone become unresponsive after a software update? If not, how did it happen. I'm curious.
Thanks for sharing.
Click to expand...
Click to collapse
well sorta, i mean i was always reflashing roms. usually the cyanogen nightlies, jellybam.. but after i flashed the last nightly the touch wouldn't work. but this was about a month ago. i tried unbrick, flashing gingerbread, ics, and jellybean.. they all installed properly with no problems but no touch. i've the phone pretty much since it came out and rooted it right away. so i either flashed it to death or it was just the natural end of life for the device.., i'm not sure. let me know what the diagnostic turns up.
Nitro Lopez said:
well sorta, i mean i was always reflashing roms. usually the cyanogen nightlies, jellybam.. but after i flashed the last nightly the touch wouldn't work. but this was about a month ago. i tried unbrick, flashing gingerbread, ics, and jellybean.. they all installed properly with no problems but no touch. i've the phone pretty much since it came out and rooted it right away. so i either flashed it to death or it was just the natural end of life for the device.., i'm not sure. let me know what the diagnostic turns up.
Click to expand...
Click to collapse
I had the same problem with unresponsive touchscreen. Used the unbrick method from the top of this forum. Make sure to rename kdz file and leave Korea as a country. Those are steps not mention in the guide. That will fix the touch.
http://forum.xda-developers.com/showthread.php?t=1597488
I hope this helps.
nikolayds said:
I had the same problem with unresponsive touchscreen. Used the unbrick method from the top of this forum. Make sure to rename kdz file and leave Korea as a country. Those are steps not mention in the guide. That will fix the touch.
http://forum.xda-developers.com/showthread.php?t=1597488
I hope this helps.
Click to expand...
Click to collapse
Your screen became unresponsive after a software upgrade too? Following the guide made it work again? That would be awesome.
I had a look at the guide and I didn't see anything about having to rename the kdz file. Could you point it out for me? Thanks.
Just make sure it ends in _00, for example v10f_00.kdz
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Just make sure it ends in _00, for example v10f_00.kdz
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I understand. I tried that Korean room in both guides and neither rom boots after a successful flash. I'll try again tonight. I've spent hours try to get it to work and I'm tempted to just recycle it
I wonder if paying a cell shop to flash it would solve the issue.
audit13 said:
I understand. I tried that Korean room in both guides and neither rom boots after a successful flash. I'll try again tonight. I've spent hours try to get it to work and I'm tempted to just recycle it
I wonder if paying a cell shop to flash it would solve the issue.
Click to expand...
Click to collapse
you can use to test the phone the self updater: P930_UDT_v18f_04112012 (its an exe)
---------- Post added at 06:10 PM ---------- Previous post was at 06:07 PM ----------
audit13 said:
Your screen became unresponsive after a software upgrade too? Following the guide made it work again? That would be awesome.
I had a look at the guide and I didn't see anything about having to rename the kdz file. Could you point it out for me? Thanks.
Click to expand...
Click to collapse
Yes, I got the phone to play with, after failed upgrade attempt (official update).
I run the unbrick process and got stuck in 4% and rebooted phone in emergency screen. Touchscreen was unresponsive.
Then re-read the thread and found the suggestions with renaming and keep the country as 'Korean'
nikolayds said:
I had the same problem with unresponsive touchscreen. Used the unbrick method from the top of this forum. Make sure to rename kdz file and leave Korea as a country. Those are steps not mention in the guide. That will fix the touch.
http://forum.xda-developers.com/showthread.php?t=1597488
I hope this helps.
Click to expand...
Click to collapse
hmm ill try this also if i can find my nitro now, i dont see how leaving korea as the country will work because u need the touch to change the country dont you? unless u mean the part where it is updating through the computer via usb to the nitro? ill try though, now just gotta download all that unbrick crap again cuz i deleted it, for obvious reasons.. anyways ill try
Nitro Lopez said:
hmm ill try this also if i can find my nitro now, i dont see how leaving korea as the country will work because u need the touch to change the country dont you? unless u mean the part where it is updating through the computer via usb to the nitro? ill try though, now just gotta download all that unbrick crap again cuz i deleted it, for obvious reasons.. anyways ill try
Click to expand...
Click to collapse
Yes through the install of the kdz. Choose Korea as the country and English as the language. It is needed to complete the process properly.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Yes through the install of the kdz. Choose Korea as the country and English as the language. It is needed to complete the process properly.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
didn't work. tried it four times.. the optimus rom flashes but still no touch. the update completed fully each time no freezes at 90 percent, or 4 percent, 100 percent each time. after that your suppose to go to the settings and set up usb but i cant cuz no touch. thanks for the tips but i guess its just my phone.
I downloaded and used the files from Machzelet's guide and it flashed the su640 rom very quickly and, when it re-booted, it looked like it still had the 18f rom from Hereric's guide even though it seems to have flashed the Korean rom without any errors.
Tried under WinXP since I had luck in the past using XP rather than Win 7 but I still had no luck.
I forgot to save the logs but I could probably go back a re-run the program and save the logs if that would help.
Would taking it to a repair shop be any different than me trying to flash the rom in emergency or recovery mode?
Edit: I tried to flash the Korean rom again and it looks to have worked because I see the Optimus LTE icon with the spinning pink "candy cane", then it boots and I see the time (which is incorrect) and the purple grapes in the background. Unfortunately, the screen still doesn't respond to touches.
Also, I had to change the select type to CDMA; otherwise, I could not get the CSE web upgrade test button to work.
Here's a partial log:
23:08:13 : [C:\LGMobileUpgrade] Try to delete folder
23:08:13 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:08:13 : Start Date : 2013-08-08 23:08:13
23:08:13 : ---------- QM CSE Testmode ---------
23:08:13 : ---------- CSE mode ---------
23:08:13 : ***** Check Tool Version *****
23:08:13 : Tool version : 1.5.4.8
23:08:13 : UpgradeDLL version : 1.2.6.7
23:08:13 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:08:13 : LGE USB Driver Version :
23:08:13 : Android PDLV Version :
23:08:13 : Android NDLV Version :
23:08:13 : ******************************************
23:08:13 : SetEmerModeAT()
23:08:13 : *****CheckOS Start********
23:08:13 : Microsoft_Windows7_Professional_Service Pack 1
23:08:13 : *****CheckPCSyncPrograms Start*****
23:08:24 : PCSyncPrograms Not Found - OK and ready to upgrade
23:08:25 : ****************CheckAndDownload********************
23:08:25 : ******Extract Start D:\Downloads\Nitro_Unbrick\Machzelet's Unbrick\LG-SU640-V10F_00.kdz*****
23:08:25 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
23:08:25 : File Size = 474536279
23:08:30 : Extract kdz file Success.
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb\n
23:08:31 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb)
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll\n
23:08:31 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll)
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdh\n
23:08:31 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
23:08:31 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\SU640_WD_1_1_3_0.dll)
23:08:31 : Extract End D:\Downloads\Nitro_Unbrick\Machzelet's Unbrick\LG-SU640-V10F_00.cab
23:08:31 : ------------------Model.dll Information-------------------
23:08:31 : Filename : SU640_WD_1_1_3_0.dll
23:08:31 : Version : 1.1.3.023:09:41 : wParam : 2004, lParam = 92
23:08:31 : File size : 348160
23:08:31 : File date : 2011/10/27-17:09:48
23:08:31 : PC Created date: 2013/08/08-22:53:34
23:08:31 : ----------------------------------------------------------
23:08:31 : *****Check LGCM Programs Start*****
23:08:31 : LGCM Programs Not Found - OK and ready to upgrade
23:08:31 : *****WorkModelDLL Start*****
23:08:31 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
23:08:31 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
ionaity and
audit13 said:
I downloaded and used the files from Machzelet's guide and it flashed the su640 rom very quickly and, when it re-booted, it looked like it still had the 18f rom from Hereric's guide even though it seems to have flashed the Korean rom without any errors.
Tried under WinXP since I had luck in the past using XP rather than Win 7 but I still had no luck.
I forgot to save the logs but I could probably go back a re-run the program and save the logs if that would help.
Would taking it to a repair shop be any different than me trying to flash the rom in emergency or recovery mode?
Edit: I tried to flash the Korean rom again and it looks to have worked because I see the Optimus LTE icon with the spinning pink "candy cane", then it boots and I see the time (which is incorrect) and the purple grapes in the background. Unfortunately, the screen still doesn't respond to touches.
Also, I had to change the select type to CDMA; otherwise, I could not get the CSE web upgrade test button to work.
Here's a partial log:
23:08:13 : [C:\LGMobileUpgrade] Try to delete folder
23:08:13 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:08:13 : Start Date : 2013-08-08 23:08:13
23:08:13 : ---------- QM CSE Testmode ---------
23:08:13 : ---------- CSE mode ---------
23:08:13 : ***** Check Tool Version *****
23:08:13 : Tool version : 1.5.4.8
23:08:13 : UpgradeDLL version : 1.2.6.7
23:08:13 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:08:13 : LGE USB Driver Version :
23:08:13 : Android PDLV Version :
23:08:13 : Android NDLV Version :
23:08:13 : ******************************************
23:08:13 : SetEmerModeAT()
23:08:13 : *****CheckOS Start********
23:08:13 : Microsoft_Windows7_Professional_Service Pack 1
23:08:13 : *****CheckPCSyncPrograms Start*****
23:08:24 : PCSyncPrograms Not Found - OK and ready to upgrade
23:08:25 : ****************CheckAndDownload********************
23:08:25 : ******Extract Start D:\Downloads\Nitro_Unbrick\Machzelet's Unbrick\LG-SU640-V10F_00.kdz*****
23:08:25 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
23:08:25 : File Size = 474536279
23:08:30 : Extract kdz file Success.
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb\n
23:08:31 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb)
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll\n
23:08:31 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll)
23:08:31 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdh\n
23:08:31 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
23:08:31 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\SU640_WD_1_1_3_0.dll)
23:08:31 : Extract End D:\Downloads\Nitro_Unbrick\Machzelet's Unbrick\LG-SU640-V10F_00.cab
23:08:31 : ------------------Model.dll Information-------------------
23:08:31 : Filename : SU640_WD_1_1_3_0.dll
23:08:31 : Version : 1.1.3.023:09:41 : wParam : 2004, lParam = 92
23:08:31 : File size : 348160
23:08:31 : File date : 2011/10/27-17:09:48
23:08:31 : PC Created date: 2013/08/08-22:53:34
23:08:31 : ----------------------------------------------------------
23:08:31 : *****Check LGCM Programs Start*****
23:08:31 : LGCM Programs Not Found - OK and ready to upgrade
23:08:31 : *****WorkModelDLL Start*****
23:08:31 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
23:08:31 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
Click to expand...
Click to collapse
yeah mine did that too. i didn't think it would work, its more than likely we have bad screens and digitizers that have to be replace. like 30 or 40 bucks online for replacement. probably cost double if u take it somewhere to be fixed. suck, i kinda had my hopes up when this thread started cuz its what happended to mine. only wish gazelle.com would take it..
Nitro Lopez said:
yeah mine did that too. i didn't think it would work, its more than likely we have bad screens and digitizers that have to be replace. like 30 or 40 bucks online for replacement. probably cost double if u take it somewhere to be fixed. suck, i kinda had my hopes up when this thread started cuz its what happended to mine. only wish gazelle.com would take it..
Click to expand...
Click to collapse
I did get the Korean rom onto the phone, at least it booted up and I see the purple grapes but the touch doesn't respond. My digitizer definitely works because I tested it on another phone. Oh well, I tried and I don't want to spend anymore time or money on it.
Not met this situation
I had that problem as well, the fix was actually allot simpler than I thought run the phone from a 100% battery in download mode with a cloth or something covering it so it super heats when it finally dies put it in the fridge to cool it charge the phone and try reflashing using herrics guide or whichever unbrick works best for you... and yes the Korean country is vital depending on the kdz u choose to flash its stupid but its an lg thing I had the same problem with my optimus 3d before I sold it and my nitro before it got facefraked
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
gd999 said:
Not met this situation
Click to expand...
Click to collapse
Turned out to be a hardware problem with the phone motherboard.
I Flashed the e988k rom kikkat on my att e980 and it bricked im stuck on the second lg boot logo i tried flashing using the kdz for a e980h but it disconnects and says this. Please help!
23:38:00 : *****GetPhoneType Start*****
23:38:00 : Phone Type : CDMA_2CHIP
23:38:00 : *****GetPhoneModel Start*****
23:38:00 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_GetPhoneModel() strlen(pPhoneModelBuf) Error)
23:38:00 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:38:00 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:38:00 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:38:00 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
You cannot do that. Wait for att to push it. Or check if there are other versions of e980 kk Roms. Last t I me i checked panama roms were popular.
Sent from my X9006 using Tapatalk
Ive tried flashing the panama one on there in download mode and i keep getting that error.? Is there something im missing ive been trying the kdz method.
I used the tutorial here http://www.cellrabta.pk/2013/10/how-to-flash-big-kdz-files-optimus-g-gk-g-pro-g2-and-others/ to load the kdz on mine successfully.
Sent from my N550JV using Tapatalk