Related
ok this is the guide from Qzytor
http://forum.xda-developers.com/showthread.php?t=725290&page=120
Install NetRippers Msm7kCpuSpeed V.2 App. in your Device -- (I'm using v.1 becouse with v.2 i didn't get above 700mhz)
Install oruam57s SetCpuSpeed v1.0d on SD card.
Take SD card out and soft reset the phone.
Open registry.
Go to HKLM\Software\Msm7kCpuSpeed.
Edit the values as below:
BootTime = 90000 (This is important. This value gives enough time for the
phone to fully boot up. The phone has to fully boot up
before the OC kicks in)
CheckTime = 20 (Stable at 20, otherwise yoyos between base and OCed
cpu speed)
Command = 0
PerfomanceLevel = 35 (This speed is stable for me without SOD)
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
Close Registry editor, insert SD card in the phone and soft reset the phone.
Once the phone has fully boot up, give it a minute before opening NetRippers Msm7kCpuSpeed and you should see your OCed cpu speed.
If your OC cpu speed isnt stable then take your SD card out,soft reset the phone and registry edit PerfomanceLevel to a lower value.
To restore back to phone default speed:
Open File Explorer.
Go to Windows\Startup folder and delete SetCpuSpeed.
Soft reset the phone and phone default speed will be restored.
Before deleting SetCpuSpeed from Windows\Startup folder , save it in Documents folder so if you want to overclock again, copy and paste it from Documents folder to Windows\Startup folder.
SKTools Benchmark at 672 MHz:
Intiger = 416.5933 Moves/25 usec.(At stock speed Intiger = 332.6351)
Floating point = 9.56 MWIPS. (At stock speed Floating point = 7.47 MWIPS)
I haven't tested it but this should also work on SEX1 and Touch Diamond.
OVERCLOCK AT YOUR OWN RISK.
ok thats Qzytor post which is really great and i'm very thankfull for this
this is my setting and i try this on energy and valkyrie rom working on xperia
BootTime = 90000
CheckTime = 20
Command = 0
PerfomanceLevel = 39 (thats 744mhz and it's stabel for me )
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
but i'm using msm7kcpuspped v1 not v2 .....
you don't need to plug in the phone especially when the phone boots up (thats was may first mistake i never wait the phone to fully boot up , and i was allways presing some buttons and that's way my phone was freezing so just wait and you will see for yourself
it's working stable but only plug in to ac adapter ....the speed is quite impresive ..
X1 freeze even on AC Adapter
Can't get this app to work on my x1 even on ac adapter.
Each time I try to adjust the speed my x1 will freeze immediately and I had to hard reset it. It's even freeze when I underclock it.
Can anyone tell me what's wrong with it? By the way I'm using WM6.5.3 ROM. Could this be the reason?
Thanks.
NoXsTeR said:
Can't get this app to work on my x1 even on ac adapter.
Each time I try to adjust the speed my x1 will freeze immediately and I had to hard reset it. It's even freeze when I underclock it.
Can anyone tell me what's wrong with it? By the way I'm using WM6.5.3 ROM. Could this be the reason?
Thanks.
Click to expand...
Click to collapse
i'm using energy 17th rom standard...do you have any other software for overclocking , try only conected to your computer ...
[X1 Freeze SOLVED] Connect to AC power from PC
dude!! finally got it running while connected to pc.. thanks for the tip
currently oc speed up to 652.8.. scrolling now a bit smoother.. video playback on wm player almost flawless..
dude what's the highest speed you achieve without ac power?
NoXsTeR said:
dude!! finally got it running while connected to pc.. thanks for the tip
currently oc speed up to 652.8.. scrolling now a bit smoother.. video playback on wm player almost flawless..
dude what's the highest speed you achieve without ac power?
Click to expand...
Click to collapse
691 mhz , then i unpluged and it was working for quite a while , but we must all wait for new version ...and hope for the best
max stable oc is 671mhz.
evryone which would like to overclock xperia ,see this post
#1191
http://forum.xda-developers.com/showthread.php?t=725290&page=120
it really works on battery power no SOD for now (last 4 hours) on 692 mhz ...
i'm using now latest valkyrie rom ...
you must try this if you want to overclock your phone for maximum performance .
if anyone overclock above 692 please post here ....
fil--21 said:
evryone which would like to overclock xperia ,see this post
#1191
http://forum.xda-developers.com/showthread.php?t=725290&page=120
it really works on battery power no SOD for now (last 4 hours) on 692 mhz ...
i'm using now latest valkyrie rom ...
you must try this if you want to overclock your phone for maximum performance .
if anyone overclock above 692 please post here ....
Click to expand...
Click to collapse
Where did u get the setcpuspeed 1.0d?
ok here .... please post your findings here
fil--21 said:
ok here .... please post your findings here
Click to expand...
Click to collapse
Doesnt works for me,they always returns the PerfomanceLevel to 30.
Tell me, any difference running at 692? May i see youtube videos on Skyfire? And the battery drain?
Ok, now it works but my max PerfomanceLevel is 33 (634mhz)
fil--21 said:
691 mhz , then i unpluged and it was working for quite a while , but we must all wait for new version ...and hope for the best
Click to expand...
Click to collapse
What numbers do you use?
BootTime =
CheckTime =
Command = 0
PerfomanceLevel =
ScreenOffPerfomanceLevel =
SettlingTime =
Results
634mhz:
387
9.150
stock:
330
7.756
I dont know what it means
i use
BootTime =90000
CheckTime =20
Command = 0
PerfomanceLevel =36
ScreenOffPerfomanceLevel =27
SettlingTime =10
and i use it for two days without any SOD ...but i think this is the max what xperia can achieve ...becouse any other setting above performance level 36 is SOD or restart ... but performance was quite impressive ...i will post the results later .... i can only say that performance in fpsece was better (playable) around 25-30 fps ..before 15-20
I don't understand this step: "Go to HKLM\Software\Msm7kCpuSpeed"
How to do that?
njerkan said:
I don't understand this step: "Go to HKLM\Software\Msm7kCpuSpeed"
How to do that?
Click to expand...
Click to collapse
Use a registry editor to navigate to that "folder." If you google registry editor, you'll figure it out.
there is another tool for overclocking called OCT 1.5 , but i coludn't overclocked not even for 10 mhz , its allways frezes ,so if anybody can overclocked with this tool please let us know....
i use now xperia overclocked to 692 mhz in i see an improvement but i would like to overclocked to 768 mhz , ....if you have touch pro 2 is that quite easy to achieve (so it looks ) ...
so if anyone can explain to me what's the difference that they overclocked so high ?
Hi! Just to let you know: I OC'ed my xperia to 748Mhz. Running stable for 2-3 days.
Used settings:
BootTime: 90000
CheckTime: 20
Command: 0
PerformanceLevel: 39
ScreenOffPerformanceLevel: 25
SettlingTime: 10
phini said:
Hi! Just to let you know: I OC'ed my xperia to 748Mhz. Running stable for 2-3 days.
Used settings:
BootTime: 90000
CheckTime: 20
Command: 0
PerformanceLevel: 39
ScreenOffPerformanceLevel: 25
SettlingTime: 10
Click to expand...
Click to collapse
?? really which rom do you have ? that's quite immpresive becouse i never get over 700 mhz and i tried a lot of diffrent roms ...
are you using fpsece ? is there any progress on fps ? please let me know
I need help. my htc one x gets very hot , now explain my case:
my phone was always 27 º c - 30 º c and use Greenify keep suspended my phone app
4 days ago and began installing the rom [ROM] lONElyX 1.0.1 | SENSE 5 | JellyBean 4.2.2 | 4.18.401.3 , problems with temperature while the second day I get to 57 º c crazy no?, I decided to delete the rom and return to the rom I had before
by strange reasonproblems with temperature whil but this time my phone was not or rather did not reach 27 ° c, is always kept in the 34th c onwards
I need some help to solve this problem, if not so it may be that the phone is reached to burn because it is not normal for the phone without having high temperatures using estarse
I need to stabilize the phone
kayserxx said:
I need help. my htc one x gets very hot , now explain my case:
my phone was always 27 º c - 30 º c and use Greenify keep suspended my phone app
4 days ago and began installing the rom [ROM] lONElyX 1.0.1 | SENSE 5 | JellyBean 4.2.2 | 4.18.401.3 , problems with temperature while the second day I get to 57 º c crazy no?, I decided to delete the rom and return to the rom I had before
by strange reasonproblems with temperature whil but this time my phone was not or rather did not reach 27 ° c, is always kept in the 34th c onwards
I need some help to solve this problem, if not so it may be that the phone is reached to burn because it is not normal for the phone without having high temperatures using estarse
I need to stabilize the phone
Click to expand...
Click to collapse
Its normal having CPU or Battery temp between 20-30ºc
try flashing a custom kernel that enables GPU scaling.
convict_moody said:
Its normal having CPU or Battery temp between 20-30ºc
try flashing a custom kernel that enables GPU scaling.
Click to expand...
Click to collapse
which would you recommend me? one that has good battery life and not much hot
settings that you recommend?
Xm, or faux
Sent from my HTC One X using XDA Premium 4 mobile app
Xm nor faux will work on sense 5 ! They are sense 4 kernels. Only custom kernel atm is Alex V kernel.
Try to reduce frequencies in the trickster mod app (playstore) reduce them to 1300 or even lower. And maybe reducing the cores to 2 helps a bit. Don't know if it enough but worth to try.
Mr Hofs said:
Xm nor faux will work on sense 5 ! They are sense 4 kernels. Only custom kernel atm is Alex V kernel.
Try to reduce frequencies in the trickster mod app (playstore) reduce them to 1300 or even lower. And maybe reducing the cores to 2 helps a bit. Don't know if it enough but worth to try.
Click to expand...
Click to collapse
Thanks bro, for correcting my infos, didn't install sense 5 on HOX yet :/
convict_moody said:
Thanks bro, for correcting my infos, didn't install sense 5 on HOX yet :/
Click to expand...
Click to collapse
you should !
Hi everyone. Is the heat persist for everyone. Mine in average 65 degree centigrade and going to Max 73 degree centigrade (through cputemp in status bar xposed module). I'm using telsa rom latest build (based on CM11 R17). I have also tried many custom roms and kernels, mods, underclock but same heating problem. Is there anything I'm missing out. Is there anything really working heat problem solution .
Please help let me know any information to be provided further.
try latest carbon rom... mine doesn't go above 38 deg, 45 deg n 60 deg while idle, while using phone n while playing games resp...
Try Latest Carbon or CM11.
I didn't noticed any heating issues in the latest CM11 builds!
I believe that the price of the phone tells us we should NOT have great expectations.Still,it turned out to be an amazing phone,with a great camera,good performance,no major issues(trust me,i owned an xperia L.that phone has obvious issues and Sony does nothing to fix them.I would sue them if I could for selling that on the market).The heating problem can't be avoided.I'm using latest CM11 and I use mostly balanced profile(1401 mHz top frequncy),and when using the phone to send texts,a little browsing,calls and so on it doesn't get heated up,or it gets a little warmer if you watch youtube videos for example,but when I play games,that's a whole new story.It is obviously that the phone is very hot,way above average.And that's it,we have to deal with it.We can't do anything,that's how the phone was build,the materials they used and so on.On stock the phone has some thermal engine control,if the phone got too hot it dropped the CPU frequency.Now on CM11,there's nothing similar,so we have to be careful to not let it stay hot as hell for too long,it might burn the CPU.I will ask the rom developer about this concern.Hope I helped you.All the best !
The best solution for "Heating Problem And Faster Battery Draining":
1)Flash latest Carbon Rom RC6 4.4.4 (it has its own kernel which is very much optimized and has some more governers)
2)After flashing Carbon Rom click go to settings>about phone> click build number 5 to 6 times to activate Developer options and Performance menu.
3)In performance menu Set maximum speed to 998 Mhz and minimum to 300 Mhz, Set the Governer to "conservative" and I/O Scheduler to "cfq".(If you play games alot then set max frequency to 1190)
4)Install Xposed framework
5)Install Greenify app, now activate its module in Xposed Framwork.
6)Add all applications to greenify list and greenify them. Set the Working mode to Boost. Also check auto hibernation mode.
7)Also create a hibernate now shortcut to homescreen to greenify apps frequently when you dont use them.
Now your phone will never heat and it will increase your battery by 50%
Enjoy
cm11
try cm 11 with xcelerate kernel for better batt and heat control
Hello all,
I have installed Fulmics Rom 5.3 with latest xceed beta kernel in my D855 (32GB edition).
My problem is that it overheats like crazy.
I started checking the temp readings inside the Synapse app and it goes like this:
Idle temperature:55 degrees Celsius,
Normal web browsing:65 degrees Celsius,
Demanding web browsing,1080p+ video quality watching,playing games:80 degrees Celsius,
at which point it crashes either by rebooting the UI or in some cases, by rebooting the phone when it reaches 85+ I think.
Needless to say,it lags annoyingly much,it freezes a lot and it crashes in the middle of videos or game playing (so I can't play at all most of the time).
The culprit must be external temperature.The past few days we have temperatures of over 40 degrees Celsius here
and the thermometer in my room shows right now 33 degrees Celsius.
I have removed the protective case because then my phone was completely useless.
Do you guys have any idea or tip on how i can mitigate these effects?
kostasmaniac said:
Hello all,
I have installed Fulmics Rom 5.3 with latest xceed beta kernel in my D855 (32GB edition).
My problem is that it overheats like crazy.
I started checking the temp readings inside the Synapse app and it goes like this:
Idle temperature:55 degrees Celsius,
Normal web browsing:65 degrees Celsius,
Demanding web browsing,1080p+ video quality watching,playing games:80 degrees Celsius,
at which point it crashes either by rebooting the UI or in some cases, by rebooting the phone when it reaches 85+ I think.
Needless to say,it lags annoyingly much,it freezes a lot and it crashes in the middle of videos or game playing (so I can't play at all most of the time).
The culprit must be external temperature.The past few days we have temperatures of over 40 degrees Celsius here
and the thermometer in my room shows right now 33 degrees Celsius.
I have removed the protective case because then my phone was completely useless.
Do you guys have any idea or tip on how i can mitigate these effects?
Click to expand...
Click to collapse
Do you use xposed?
Using xposed along with xceed kernel will give you severe overheating.
Sent from my LG-D855 using XDA-Developers mobile app
kostasmaniac said:
Hello all,
I have installed Fulmics Rom 5.3 with latest xceed beta kernel in my D855 (32GB edition).
My problem is that it overheats like crazy.
I started checking the temp readings inside the Synapse app and it goes like this:
Idle temperature:55 degrees Celsius,
Normal web browsing:65 degrees Celsius,
Demanding web browsing,1080p+ video quality watching,playing games:80 degrees Celsius,
at which point it crashes either by rebooting the UI or in some cases, by rebooting the phone when it reaches 85+ I think.
Needless to say,it lags annoyingly much,it freezes a lot and it crashes in the middle of videos or game playing (so I can't play at all most of the time).
The culprit must be external temperature.The past few days we have temperatures of over 40 degrees Celsius here
and the thermometer in my room shows right now 33 degrees Celsius.
I have removed the protective case because then my phone was completely useless.
Do you guys have any idea or tip on how i can mitigate these effects?
Click to expand...
Click to collapse
There are a couple popular mods available for overheat. One is with software tweaks and the other is a hardware mod.
CTT(software mod) mod... http://forum.xda-developers.com/lg-...-marshmallow-testers-g3-t3313870#post65295829
Thermal paste/pad(hardware mod)... http://forum.xda-developers.com/lg-g3/general/thermal-paste-to-cooling-g3-t3130752
*I don't use fulmics...if 5.3 is a lollipop rom search for the original CTT mod as it was made for LP.
Good luck
oh guys, i just got this problem maybe. I after take a photos, suddenly my lg g3 d855 restart, maybe because it is hot. then it goes to bootloop. i dont know why then i take off my handphone. i charge my handphone from about 10% to 60%, then i turned on again. it didnt bootloop, it operated normal again.
TeranG__ said:
oh guys, i just got this problem maybe. I after take a photos, suddenly my lg g3 d855 restart, maybe because it is hot. then it goes to bootloop. i dont know why then i take off my handphone. i charge my handphone from about 10% to 60%, then i turned on again. it didnt bootloop, it operated normal again.
Click to expand...
Click to collapse
If the phone shutdown due to high temperatures you can try ctt mod. The link is in the above post.
I've faced extreme temperatures when shooting video on uhd but not while taking any photos. Are you sure it's because if temperature or a bug on the rom?
Sent from my LG-D855 using XDA-Developers mobile app
Sreerag ag said:
Do you use xposed?
Using xposed along with xceed kernel will give you severe overheating.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah I do.For greenify,amplify and lucky patcher.
Do you think I should remove it even though I will lose its benefits?
startswithPendswithOOH said:
There are a couple popular mods available for overheat. One is with software tweaks and the other is a hardware mod.
CTT(software mod) mod... http://forum.xda-developers.com/lg-...-marshmallow-testers-g3-t3313870#post65295829
Thermal paste/pad(hardware mod)... http://forum.xda-developers.com/lg-g3/general/thermal-paste-to-cooling-g3-t3130752
*I don't use fulmics...if 5.3 is a lollipop rom search for the original CTT mod as it was made for LP.
Good luck
Click to expand...
Click to collapse
Fulmics is an android 6 rom.I think xceed implements a custom ctt mod and I do have used it before independently of a custom kernel.It went pretty smooth until it hit high temperatures and the phone completely shut down.Every time.
I may try the hardware mod,although I am sceptical about the warranty.The software I can bring it back to stock.I have some Arctic Silver 5 laying around.Should I use this or a pad?
kostasmaniac said:
Fulmics is an android 6 rom.I think xceed implements a custom ctt mod and I do have used it before independently of a custom kernel.It went pretty smooth until it hit high temperatures and the phone completely shut down.Every time.
I may try the hardware mod,although I am sceptical about the warranty.The software I can bring it back to stock.I have some Arctic Silver 5 laying around.Should I use this or a pad?
Click to expand...
Click to collapse
If you think you will need to send it in at some point I would say use the pad instead of the paste for ease of removal. If there is paste all over the place they may invalidate your warranty. I used some paste and it worked fine...but I have no warranty to worry about.
But you may want to try a different kernel or run your ROM with the "stock" kernel included in Fulmics for a little while to make sure you don't have some weird conflict causing your issue. Other posters mentioned xposed or the kernel could be the issue, so it could just be your setup messing with you.
kostasmaniac said:
Yeah I do.For greenify,amplify and lucky patcher.
Do you think I should remove it even though I will lose its benefits?
Click to expand...
Click to collapse
Xposed is the culprit here. When I had this problem I went back to stock kernel instead of removing xposed. With stock kernel it works perfect.
G3 D855
ROM : Exodus 18/06
Hit thanks if I helped you
Sreerag ag said:
Xposed is the culprit here. When I had this problem I went back to stock kernel instead of removing xposed. With stock kernel it works perfect.
G3 D855
ROM : Exodus 18/06
Hit thanks if I helped you
Click to expand...
Click to collapse
Then I shall reflush Fulmics Rom with cache and dalvik/art cache wipe and delete xposed app...lets see if that helps!
startswithPendswithOOH said:
If you think you will need to send it in at some point I would say use the pad instead of the paste for ease of removal. If there is paste all over the place they may invalidate your warranty. I used some paste and it worked fine...but I have no warranty to worry about.
But you may want to try a different kernel or run your ROM with the "stock" kernel included in Fulmics for a little while to make sure you don't have some weird conflict causing your issue. Other posters mentioned xposed or the kernel could be the issue, so it could just be your setup messing with you.
Click to expand...
Click to collapse
I will try without xposed and xceed and see what happens.
Big thanks to you both!!!
Some days after this,the phone runs a lot smoother.It does not freeze a lot and does not restart itself or the UI.
When I am inside my house it performs like a G3 should perform.Outside...that is another issue.The CPU temp reads 85 degrees celsius most of the time,but that is typical here.Most of the people experience it under the unforgiving sun of my country.
Thanks for the tips!Will try the hardware one after a while to see if I can get it cooler.
kostasmaniac said:
Some days after this,the phone runs a lot smoother.It does not freeze a lot and does not restart itself or the UI.
When I am inside my house it performs like a G3 should perform.Outside...that is another issue.The CPU temp reads 85 degrees celsius most of the time,but that is typical here.Most of the people experience it under the unforgiving sun of my country.
Thanks for the tips!Will try the hardware one after a while to see if I can get it cooler.
Click to expand...
Click to collapse
Good to hear that
G3 D855---ROM : Fulmics 5.3---Xposed
kostasmaniac said:
Some days after this,the phone runs a lot smoother.It does not freeze a lot and does not restart itself or the UI.
When I am inside my house it performs like a G3 should perform.Outside...that is another issue.The CPU temp reads 85 degrees celsius most of the time,but that is typical here.Most of the people experience it under the unforgiving sun of my country.
Thanks for the tips!Will try the hardware one after a while to see if I can get it cooler.
Click to expand...
Click to collapse
It's still abnormal.
I may understand high temperature like 70-75 °C, but higher one is indication of some buggy process.
According to my experience, using Kernel Adiutor (regardless the kernel is stock or custom) will get you in battery draining, due to overloading and the preventing of Deep Sleep status.
If you've modded kernel, try to undo all changes.
Simone98RC said:
It's still abnormal.
I may understand high temperature like 70-75 °C, but higher one is indication of some buggy process.
According to my experience, using Kernel Adiutor (regardless the kernel is stock or custom) will get you in battery draining, due to overloading and the preventing of Deep Sleep status.
If you've modded kernel, try to undo all changes.
Click to expand...
Click to collapse
After your tips,I uninstalled every app that needed the xposed kernel and uninstalled the xposed kernel itself.
Then I rebooted into recovery and wiped cache and dalvik/art.I installed Fulmics Rom 5.1, 5.1 to 5.2 update, 5.2 to 5.3 update and rebooted.
Neither any app that modifies anything in the system,nor any mod was installed.
Could I give any screenshot or info of processes,apps etc so you can advise me better?
kostasmaniac said:
After your tips,I uninstalled every app that needed the xposed kernel and uninstalled the xposed kernel itself.
Then I rebooted into recovery and wiped cache and dalvik/art.I installed Fulmics Rom 5.1, 5.1 to 5.2 update, 5.2 to 5.3 update and rebooted.
Neither any app that modifies anything in the system,nor any mod was installed.
Could I give any screenshot or info of processes,apps etc so you can advise me better?
Click to expand...
Click to collapse
Yes,
install Simple System Monitor and send the shown CPU Frequency States;
Then go in "Settings > Battery" and send another screenshot
Simone98RC said:
Yes,
install Simple System Monitor and send the shown CPU Frequency States;
Then go in "Settings > Battery" and send another screenshot
Click to expand...
Click to collapse
I don't know if I got them right,but there you go. (I attached them)
EDIT:Sorry for the language...at one point it showed that Spotify consumed a lot of battery, but the music was being streamed by my tablet not my phone.
kostasmaniac said:
I don't know if I got them right,but there you go. (I attached them)
Click to expand...
Click to collapse
The SystemUI consumption is abnormal.
It should be no more than 5%.
Then I can't see the Deep Sleep status, that's problematic too.
What kind of apps are you using?
****ty software like Clean Master, mods, custom kernel, some Xposed module... tell me.
Simone98RC said:
The SystemUI consumption is abnormal.
It should be no more than 5%.
Then I can't see the Deep Sleep status, that's problematic too.
What kind of apps are you using?
****ty software like Clean Master, mods, custom kernel, some Xposed module... tell me.
Click to expand...
Click to collapse
Well I will just show you all of them
No mods except what Fulmics offered in Aroma,which I installed all except the CTT mod.No custom kernel or xposed framework installed.
I had the same overheating issues without xposed, I used the hardware mod and it worked perfectly. Once I connected the cpu with the frame the idle temp dropped ~15 to 20 degrees, and I have no probs running any app with a custom kernel and overclocked cpu.
Hello everybody
I can reduce the action of thermal throttling? My phone is impracticable because the cpu immediately reduce the frequency.
I'm lineage os 15.1 last build and have root magisk.
Please help me
Thermal throttling is there for a reason ...
Sent from my OnePlus 3 using Tapatalk
yes I understand but I think it could start when the phone is really hot and not at 42 degrees. can you explain to me how to increase the degrees to start the Thermal throttle?
thank you
westenlive said:
yes I understand but I think it could start when the phone is really hot and not at 42 degrees. can you explain to me how to increase the degrees to start the Thermal throttle?
thank you
Click to expand...
Click to collapse
Install Kernel Adiutor from PlayStore. There is an option there to adjust the temperature. If you are not able to do it, you may have to install a compatible custom kernel.
this is my situation.
I've tried different kernels, but nobody has this function.
Unfortunately I use many apps, some of them in the background for work reasons.
Having the possibility to increase the thermal throttling temperature threshold, I could solve the problem in a definitive way.
westenlive said:
this is my situation.
I've tried different kernels, but nobody has this function.
Unfortunately I use many apps, some of them in the background for work reasons.
Having the possibility to increase the thermal throttling temperature threshold, I could solve the problem in a definitive way.
Click to expand...
Click to collapse
I am using SkyDragon Pie and I am able to manipulate the temperature on it with Kernel Adiutor. I have not changed the kernel.
your rom is OOS BASED.
I used lineage os 15.1
please help me