Develop Bugs

Is my ONE X bricked?

Gday,
I tried to install Alpha 11 of CM10 on my phone today without backing up existing rom (please don't hammer me for that, I know it was dumb)
Anyway, the boot animation for CM was up for ages so I tried to go back into fastboot but now it just sits there with the
"checking SD card update..." text there and just doesn't progress. I am assuming this is a dead phone?
thank you anyone who tries to help me out here

jpustin said:
Gday,
I tried to install Alpha 11 of CM10 on my phone today without backing up existing rom (please don't hammer me for that, I know it was dumb)
Anyway, the boot animation for CM was up for ages so I tried to go back into fastboot but now it just sits there with the
"checking SD card update..." text there and just doesn't progress. I am assuming this is a dead phone?
thank you anyone who tries to help me out here
Click to expand...
Click to collapse
Never proceed without back ups !
Have you tried flashing the boot.img from the rom?
Did you wipe cache/dalvik cache?
If all else fails, try to find the RUU for your device?
Hope this is helpful..

really sorry, had power plugged in....

Did you flash the correct boot.img through fastboot?

jpustin said:
really sorry, had power plugged in....
Click to expand...
Click to collapse
Hahaha okay !

A generalization for android devices if you can still enter bootloader then its not bricked.

Nope , not a dead phone ...

Hi Friends, I have the same situation right now. While I was flashing boot.img I made something wrong I think and now my One X is stuck at Bootloader and saying "checking SD card update..."
I cant open pls help dudes... How can I make it alive...I couldnt find any solution here...:crying:

haspko39 said:
Hi Friends, I have the same situation right now. While I was flashing boot.img I made something wrong I think and now my One X is stuck at Bootloader and saying "checking SD card update..."
I cant open pls help dudes... How can I make it alive...I couldnt find any solution here...:crying:
Click to expand...
Click to collapse
Remove cable and plug in back xD
Gesendet von meinem HTC One X mit Tapatalk

Nope didnt work.
Sent from my GT-I9300 using Tapatalk

haspko39 said:
Nope didnt work.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Keep usb cable away hold the power button until it turns off and hold volume - and power button again so that you can enter bootloader..it SHOULD work...
Gesendet von meinem HTC One X mit Tapatalk

Keep usb cable away hold the power button until it turns off and hold volume - and power button again so that you can enter bootloader..it SHOULD work...
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Hi, I have just solved this problem by charging, changing the cable and unpluging. Then I installed JB Android_Revolution_HD-One_X_33.1, but it stucks on HTC logo.
I have S-ON and HBOOT 1.31. CWM 5.8.4.0.
What should I do now?
Thanks.

haspko39 said:
Hi, I have just solved this problem by charging, changing the cable and unpluging. Then I installed JB Android_Revolution_HD-One_X_33.1, but it stucks on HTC logo.
I have S-ON and HBOOT 1.31. CWM 5.8.4.0.
What should I do now?
Thanks.
Click to expand...
Click to collapse
I already replied.to you in another thread flash the boot.img and erase cache !
Gesendet von meinem HTC One X mit Tapatalk

[Flashable Zip] Traslucent Bar for Factory Image

So i have decompiled, modded and recompiled the framework-res.apk of factory image and now you can have the status+nav bar traslucent even in lockscreen (for traslucent bar in launcher you need Google Launcher) just flash it on a custom recovery
16O (old factory image):
Download Here
Mirror:
SpeedyShare
Dev-Host
16S (new factory image):
Download
Mirror:
Speedyshare
If you got bootloop get here the restore zip file:
16O:
Download
16S:
https://www.dropbox.com/s/bf8byqcmi2ymt72/framework-original.zip
THIS IS ONLY FOR FACTORY IMAGE (i have tested only on that)
Thanks to @Quinny899 for the Guide

getting bootloops on stock factory image

everything works fine now, thanks OP
using TWRP 2.6.3.0 and SuperSu v1.69 with official factory image, clean install.
and everyone who wants to try this out still download the restore just in case.

What kind of modifications did you have to make to framework-res.apk?

If you forgot the restoration, put it in your ADB folder, enter recovery and flash on sideload (CWM)
not work for me the translucent effect.

Also didnt work for me. Tried to adb sideload, but adb now wont recognize device while in bootloader fastboot or recovery

Getting a bootloop here as well, factory image with cwm

perhac89 said:
Also didnt work for me. Tried to adb sideload, but adb now wont recognize device while in bootloader fastboot or recovery
Click to expand...
Click to collapse
use N-cry to flash a CWM
in CWM, goto Install Zip / Install zip from sideload.
NOW goto adb and type : adb sideload framework-res-tore.zip

waallace said:
use N-cry to flash a CWM
in CWM, goto Install Zip / Install zip from sideload.
NOW goto adb and type : adb sideload framework-res-tore.zip
Click to expand...
Click to collapse
This is what i was trying to do in twrp, but adb wont recognize my phone

perhac89 said:
Also didnt work for me. Tried to adb sideload, but adb now wont recognize device while in bootloader fastboot or recovery
Click to expand...
Click to collapse
You can also fastboot flash just the system.img, that's what I had to do
Sent from my Nexus 4 using Tapatalk

Uhm really strange guys... Btw I have only changed to true the option for translucent in bools.XML file on framework/res/value folder.. And then compiled with apktool and flashed. Really really strange.. Someone got bootloop even after flash the restore file? BTW I have flashed it with twrp latest version...
Inviato dal mio Nexus 4 utilizzando Tapatalk

Floydfire said:
Uhm really strange guys... Btw I have only changed to true the option for translucent in bools.XML file on framework/res/value folder.. And then compiled with apktool and flashed. Really really strange.. Someone got bootloop even after flash the restore file? BTW I have flashed it with twrp latest version...
Inviato dal mio Nexus 4 utilizzando Tapatalk
Click to expand...
Click to collapse
I had done the same thing and ran into boot loops to. I am not sure why.

Floydfire said:
Uhm really strange guys... Btw I have only changed to true the option for translucent in bools.XML file on framework/res/value folder.. And then compiled with apktool and flashed. Really really strange.. Someone got bootloop even after flash the restore file? BTW I have flashed it with twrp latest version...
Inviato dal mio Nexus 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Did you sign the apk with the 'platform' key?

Floydfire said:
Uhm really strange guys... Btw I have only changed to true the option for translucent in bools.XML file on framework/res/value folder.. And then compiled with apktool and flashed. Really really strange.. Someone got bootloop even after flash the restore file? BTW I have flashed it with twrp latest version...
Inviato dal mio Nexus 4 utilizzando Tapatalk
Click to expand...
Click to collapse
I used cwm...twrp hasn't been working well for me lately
Sent from my Nexus 4 using Tapatalk

terryhau said:
Did you sign the apk with the 'platform' key?
Click to expand...
Click to collapse
I'm uploading an apk signed with zipsigner... Maybe I have not signed well the first on the zip... Just wait, then try and let me know... I'll update with flashable zip later if works...
Edit: here the apk, seems like I forgot to sign the first time, sorry guys... Try this https://mega.co.nz/#!l9s1mJKK!jA_8NOi8pfT50-S67I74SMIrHwZYBqsqmBFQAX1X0sY
Inviato dal mio Nexus 4 utilizzando Tapatalk

Bootloops.

dhruvmalik said:
Bootloops.
Click to expand...
Click to collapse
The one in the op or the new one he just posted?
EDIT: nvm, tried both, both boot loop
Sent from my Nexus 4 using Tapatalk

I made my own mod framwork-res.apk, properly signed. It also bootloops.
Not sure why.

Here's another (yes it's different) flashing zip, let me know if this work---> https://mega.co.nz/#!h8tCXJ6Q!V1uCsjJ_SMz-jougWpB69WZr9BN4nJdihXeu0mI2mv8 sorry guys it's my first time of "modding" i've tried on my device the first time and work totally so i thought to share with community... sorry for the trouble... hope this one will work (i can't try since here it's 5:45 am and i'm writing by pc in stealth mode )
Try this if the two above doesn't work, and let me know if this work... if doesn't i'll try better tomorrow since i need to rest some time...
maybe can share with you what i do in the first time (before sharing my zip with you) i've modded the apk, signed with multitool then flashed: result bootloop, after i have flashed the res-tore.zip booted and recompiled the apk without signing then flashed and it was working... so i have uploaded to mega.. it's really strange because my framework-res.apk isn't signed but work. (maybe is a permission problem?)

Hm, as the factory image is odexed, isn't that causing the issue ?

[REQUEST] I need a boot script that turns on wifi on boot

ok so i need to make a boot script or init .d to turn on wifi after android boots, why? i have stock GB rom and i have airplane mode install and every time i boot my phone i have to turn on the wifi manually, very annoying

xdarkmario said:
ok so i need to make a boot script or init .d to turn on wifi after android boots, why? i have stock GB rom and i have airplane mode install and every time i boot my phone i have to turn on the wifi manually, very annoying
Click to expand...
Click to collapse
You should try this app then
Inviato dal mio R800i con Tapatalk 2

CriGiu said:
You should try this app then
Inviato dal mio R800i con Tapatalk 2
Click to expand...
Click to collapse
works great, thanks:good:

Most likely briked phone (S4 mini)... Can i fix it?

Hi... I wanted to ask something... Is my phone completely useless? Can i fix it?
The problem (Now) is that phone won't boot normally (won't boot into android), and stays on Samsung logo (Shown in photo).. Then i try to boot normally (not in recovery), phone just keep restarting over and over again. Same with safe mode... I can boot into recovery.
Story goes:
I used Cyanogen mod 13 custom rom
Few days ago i was playing with my phone and it discharged completely... I turned it on with charger and continued to play.. Charger was broken (but kind of worked), so my phone turned off again... After an hour charging i tried to boot it... It showed my custom boot animation and phone just turned off.... I tried again, and it turned off again..... Third time i tried to turn it on, it showed cyanogen boot animation (that blue thing)....Then i booted to recovery mode and tried to install same rom, but it failed. Then i tried to boot phone again, but this time it just showed Samsung logo.... After 10 minutes i tried to install original Samsung rom using Odin, but it stayed on 3% for few hours and failed.... After this phone asked to fix it using Kies.. I tried, but it said "Kies does not support initializing" (something like that)... After this i tried to install CWM custom recovery with Odin (in download mode) and it failed.... After i turned off phone, i never turned it on again....
(i tried to install original rom using another USB cable)
Now then i try to connect phone to pc using USB cable, phone sometimes vibrates, and windows makes that connecting sound (then you connect something to pc it makes that sound) and windows says "installing device driver software" and "installing device"
Is there a way to fix my phone without changing motherboard?
EDIT: I managed to turn on phone using debrick.img (4.2.2), and flashed stock 4.4.2 rom.. Now I'm stuck on Samsung logo... Any ideas how to fix that? I will try installing stock rom for 4.2.2.
EDIT: Installing another stock rom didn't help :/ (Duh)... (Dumbest idea ever )
I can't access recovery mode
Download mode says:
PRODUCT NAME: GT-I9195
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
PS: Sorry for any mistakes... English isn't my first language

Deaddvz said:
Hi... I wanted to ask something... Is my phone completely dead? Can i fix it? (S4 Mini)
I used Cyanogen mod 13 custom rom
Few days ago i was playing with my phone and it discharged completely... I turned it on with charger and continued to play.. Charger was broken (but kind of worked), so my phone turned off again... After an hour charging i tried to boot it... It showed my custom boot animation and phone just turned off.... I tried again, and it turned off again..... Third time i tried to turn it on, it showed cyanogen boot animation (that blue thing)....Then i booted to recovery mode and tried to install same rom, but it failed. Then i tried to boot phone again, but this time it just showed Samsung logo.... After 10 minutes i tried to install original Samsung rom using Odin, but it stayed on 3% for few hours and failed.... After this phone asked to fix it using Kies.. I tried, but it said "Kies does not support initializing" (something like that)... After this i tried to install CWM custom recovery with Odin (in download mode) and it failed.... After i turned off phone, i never turned it on again....
(i tried to install original rom using another USB cable)
Now then i try to connect phone to pc using USB cable, phone sometimes vibrates, and windows makes that connecting sound (then you connect something to pc it makes that sound) and windows says "installing device driver software" and "installing device"
Is there a way to fix my phone without changing motherboard?
PS: Sorry for any mistakes... English isn't my first language
Click to expand...
Click to collapse
Try with debrick.img but in my oponion the probleme is the damaged motherboard
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Try with debrick.img but in my oponion the probleme is the damaged motherboard
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I don't know which debrick.img to use, i used for i9195 4.4.2, but it didn't work
Thanks for reply

The problem is the damaged motherbord because is rare to hard brick s4 mini, maube there is a soft brick. But it isn't bricked but you have damaged the motherboard with discharging to 0%
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Deaddvz said:
I don't know which debrick.img to use, i used for i9195 4.4.2, but it didn't work
Thanks for replay
Click to expand...
Click to collapse
There is a guide
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
Try to install a samsung based rom with aroma installer like v rom
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
The problem is the damaged motherbord because is rare to hard brick s4 mini, maube there is a soft brick. But it isn't bricked but you have damaged the motherboard with discharging to 0%
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
The problem was that then i tried to install CWM to my phone it failed and i tried to restart my phone (it was still in download mode), it didn't turn on again... And it always stayed on charger (at least for an hour)...
EDIT: But i might damaged it...
Thanks for reply

I'm dumbass guys.... Debrick image worked... I installed stock rom, but now phone stays on samsung logo, (phone) trying to boot into recovery.(But stuck on it)... Any ideas?

Deaddvz said:
I'm dumbass guys.... Debrick image worked... I installed stock rom, but now phone stays on samsung logo, trying to boot into recovery.... Any ideas?
Click to expand...
Click to collapse
Wipe only data
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Wipe only data
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
If you mean wipe with recovery mode, i can't.... Phone stays on Samsung splash logo, trying to boot into recovery (it stuck)...

Deaddvz said:
If you mean wipe with recovery mode, i can't.... Phone stays on Samsung splash logo, trying to boot into recovery (it stuck)...
Click to expand...
Click to collapse
Try to flash a custom recovery
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Try to flash a custom recovery
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Tried, but nothing... Still stuck on it

Deaddvz said:
Tried, but nothing... Still stuck on it
Click to expand...
Click to collapse
Are you using debrick image 4.2.2 and have you flashed stock 4.4.2?
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Are you using debrick image 4.2.2 and have you flashed stock 4.4.2?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I (probably) have debrick.img for 4.2.2.. i installed 4.4.2 stock rom, then 4.2.2.... Nether of them worked....
debrick.img comes from here
Thanks for reply.

Deaddvz said:
I (probably) have debrick.img for 4.2.2.. i installed 4.4.2 stock rom, then 4.2.2.... Nether of them worked....
debrick.img comes from here
Thanks for replay.
Click to expand...
Click to collapse
Try to flash updated stock rom 4.2.2 with knox
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Try to flash updated stock rom 4.2.2 with knox
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
can you show me how?

Deaddvz said:
can you show me how?
Click to expand...
Click to collapse
You must download the new stock firmware 4.2.2 with knox 2.0.
I know an updated firmware but it is of spain country
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
You must download the new stock firmware 4.2.2 with knox 2.0.
I know an updated firmware but it is of spain country
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
can you give me link to it?

Deaddvz said:
can you give me link to it?
Click to expand...
Click to collapse
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk

DarkJoker360 said:
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks i will try it

DarkJoker360 said:
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks for the link, but after i installed it, nothing changed... Phone still stuck on Samsung logo....

Deaddvz said:
Thanks for the link, but after i installed it, nothing changed... Phone still stuck on Samsung logo....
Click to expand...
Click to collapse
It boot in recovery mode?
Inviato dal mio GT-I9195 utilizzando Tapatalk

Decrypt one plus 3

i have some doubts with this argument and i need help. I want to decrypt one plus 3 for flash other roms ( i red that twrp doesn't allow to write in memory if you aren't decrypted) . What i can do for decrypt it ? I red to format userdata partition in fastboot but after that the phone will boot? I tried a toolkit to decrypt it but it says is encrypted anyway. ... i need help for this pls
Inviato dal mio SM-N910F utilizzando Tapatalk

masterchif92 said:
i have some doubts with this argument and i need help. I want to decrypt one plus 3 for flash other roms ( i red that twrp doesn't allow to write in memory if you aren't decrypted) . What i can do for decrypt it ? I red to format userdata partition in fastboot but after that the phone will boot? I tried a toolkit to decrypt it but it says is encrypted anyway. ... i need help for this pls
Click to expand...
Click to collapse
Backup your data. Then In fastboot use the adb command, fastboot format user data.

numbere said:
Backup your data. Then In fastboot use the adb command, fastboot format user data.
Click to expand...
Click to collapse
I need to reflash something? Or after that just reboot?
Inviato dal mio SM-N910F utilizzando Tapatalk

masterchif92 said:
I need to reflash something? Or after that just reboot?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
You should do a search for, decrypt android device fastboot and read a few explanations.

numbere said:
You should do a search for, decrypt android device fastboot and read a few explanations.
Click to expand...
Click to collapse
Where i can read i searched everywhere on xda .... didn't found anything for op3. If i format userdata i can reboot ? The system is intact i think or not?
Inviato dal mio SM-N910F utilizzando Tapatalk

masterchif92 said:
Where i can read i searched everywhere on xda .... didn't found anything for op3. If i format userdata i can reboot ? The system is intact i think or not?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
If you would have done the search I suggested then this thread would have been on the first page.
http://forum.xda-developers.com/nexus-6p/help/phone-encrypted-flashing-rom-decrypt-t3285109

numbere said:
If you would have done the search I suggested then this thread would have been on the first page.
http://forum.xda-developers.com/nexus-6p/help/phone-encrypted-flashing-rom-decrypt-t3285109
Click to expand...
Click to collapse
I dont want to keep data i want to decrypt so i can only format user data and reboot? Or is needed to restore it ?
Inviato dal mio SM-N910F utilizzando Tapatalk

masterchif92 said:
I dont want to keep data i want to decrypt so i can only format user data and reboot? Or is needed to restore it ?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
If I understand you correctly, you simply want to leave your device decrypted in order to flash roms on the fly without the need to format. If this is true the other user correctly informed you to use fastboot to format your userdata. After that you will need a custom kernel which has the auto encrypt flag disabled. This will stop the stock rom from auto encrypting. I have not searched the thread but I imagine some after rom market roms will have this feature included.

I believe removing lockscreen security will allow you to flash roms and kernels. Please correct me if I am wrong.
Sent from my ONEPLUS A3003 using Tapatalk

vickyjusme said:
I believe removing lockscreen security will allow you to flash roms and kernels. Please correct me if I am wrong.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
That's what i did when i switched from OOS to CM13. That works perfect and my Phone is still encrypted. But if i flash a newer Snapshot, shoud i remove the lockscreen Security again or is it fine like it is. I mean, i got fingerprint security but it doesnt want a PIN when i reboot my phone.