Related
Gday,
I tried to install Alpha 11 of CM10 on my phone today without backing up existing rom (please don't hammer me for that, I know it was dumb)
Anyway, the boot animation for CM was up for ages so I tried to go back into fastboot but now it just sits there with the
"checking SD card update..." text there and just doesn't progress. I am assuming this is a dead phone?
thank you anyone who tries to help me out here
jpustin said:
Gday,
I tried to install Alpha 11 of CM10 on my phone today without backing up existing rom (please don't hammer me for that, I know it was dumb)
Anyway, the boot animation for CM was up for ages so I tried to go back into fastboot but now it just sits there with the
"checking SD card update..." text there and just doesn't progress. I am assuming this is a dead phone?
thank you anyone who tries to help me out here
Click to expand...
Click to collapse
Never proceed without back ups !
Have you tried flashing the boot.img from the rom?
Did you wipe cache/dalvik cache?
If all else fails, try to find the RUU for your device?
Hope this is helpful..
really sorry, had power plugged in....
Did you flash the correct boot.img through fastboot?
jpustin said:
really sorry, had power plugged in....
Click to expand...
Click to collapse
Hahaha okay !
A generalization for android devices if you can still enter bootloader then its not bricked.
Nope , not a dead phone ...
Hi Friends, I have the same situation right now. While I was flashing boot.img I made something wrong I think and now my One X is stuck at Bootloader and saying "checking SD card update..."
I cant open pls help dudes... How can I make it alive...I couldnt find any solution here...:crying:
haspko39 said:
Hi Friends, I have the same situation right now. While I was flashing boot.img I made something wrong I think and now my One X is stuck at Bootloader and saying "checking SD card update..."
I cant open pls help dudes... How can I make it alive...I couldnt find any solution here...:crying:
Click to expand...
Click to collapse
Remove cable and plug in back xD
Gesendet von meinem HTC One X mit Tapatalk
Nope didnt work.
Sent from my GT-I9300 using Tapatalk
haspko39 said:
Nope didnt work.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Keep usb cable away hold the power button until it turns off and hold volume - and power button again so that you can enter bootloader..it SHOULD work...
Gesendet von meinem HTC One X mit Tapatalk
Keep usb cable away hold the power button until it turns off and hold volume - and power button again so that you can enter bootloader..it SHOULD work...
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Hi, I have just solved this problem by charging, changing the cable and unpluging. Then I installed JB Android_Revolution_HD-One_X_33.1, but it stucks on HTC logo.
I have S-ON and HBOOT 1.31. CWM 5.8.4.0.
What should I do now?
Thanks.
haspko39 said:
Hi, I have just solved this problem by charging, changing the cable and unpluging. Then I installed JB Android_Revolution_HD-One_X_33.1, but it stucks on HTC logo.
I have S-ON and HBOOT 1.31. CWM 5.8.4.0.
What should I do now?
Thanks.
Click to expand...
Click to collapse
I already replied.to you in another thread flash the boot.img and erase cache !
Gesendet von meinem HTC One X mit Tapatalk
HI, When I try to use KDZ to flash the firmware stock ... it starts but suddently like 2 minutes the phone turn on . On the bootloader where I can select if turn it off, go to recovery .... Why Kdz doesn't work flashing the system ?
Just restart in download mode don't interrupt the flash it will work after few tries.
Can't confirm but I think having a nexus bootloader does that
Sent from my LG-E975 using Tapatalk
atifsh said:
Just restart in download mode don't interrupt the flash it will work after few tries.
Can't confirm but I think having a nexus bootloader does that
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Yes.. I have the bootloader of Nexus4 ... I don't interrupt it... It does automatically and it suddently turn on in black screen with the android icon opened and I should choose if turn off or go to recovery or go to bootloader.... I tried 4 times all the same story what to do?
I mean don't interrupt the flash procedure after it went to bootloader just restart in download mode
Sent from my LG-E975 using Tapatalk
What happened to the phone while KDZ is working
atifsh said:
I mean don't interrupt the flash procedure after it went to bootloader just restart in download mode
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
I put the picture about what happen ... it does it automatically... turning on I don't interrupt nothing
Yes yes I know , I'll rephrase
When it go to bootloader turn off phone and start again in download mode without shuting the kdz flasher
Sent from my LG-E975 using Tapatalk
atifsh said:
Yes yes I know , I'll rephrase
When it go to bootloader turn off phone and start again in download mode without shuting the kdz flasher
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
I m sorry but even restarting in donwloading mode it doesn't work.... the app FREEGEE that unlock bootloader... works bad it put on my lg e975 the Nexus 4 bootloader that's why KDZ doesn't work well... I sent you a screen shot as you see kdz stops and in the processes you can see something with " Auth Matk" that's the creatore of the app probably during his last update he did a mess .... In the same moment Kdz stops my phone turn on like a nexus 4 bootloader look I put here the screen shot .. Don't know how to solve it. I m worried
It happ to me also.... Tats nt a issue... Juz unplug the device and power off.. Again plug the cable and put it in download mode... The process will resume...
Sent from my LG-E975 powering Stock 4.1.2
Problem solved
GUYS THANK YOU A LOT :victory:
hasan4791 said:
It happ to me also.... Tats nt a issue... Juz unplug the device and power off.. Again plug the cable and put it in download mode... The process will resume...
Sent from my LG-E975 powering Stock 4.1.2
Click to expand...
Click to collapse
LG FREE GEE doesn't work anymore to unblock the bootloader in the right way there are other apps to unlock it ?
fra6220 said:
LG FREE GEE doesn't work anymore to unblock the bootloader in the right way there are other apps to unlock it ?
Click to expand...
Click to collapse
Lol
Sent from my Optimus G using Tapatalk
fra6220 said:
LG FREE GEE doesn't work anymore to unblock the bootloader in the right way there are other apps to unlock it ?
Click to expand...
Click to collapse
I unlock my phone bootloader today with freegee. I update my phone firmware to newest version and found that old kdz is not available to download anymore . It appear to give kernel panic after reboot. But you can install custom rom to get rid of this kernel panic problem (You must install recovery after unlock to do this).
hasan4791 said:
It happ to me also.... Tats nt a issue... Juz unplug the device and power off.. Again plug the cable and put it in download mode... The process will resume...
Sent from my LG-E975 powering Stock 4.1.2
Click to expand...
Click to collapse
Why KDZ give this error : model dll msg not found (20 108) ? how to solve it
fra6220 said:
Why KDZ give this error : model dll msg not found (20 108) ? how to solve it
Click to expand...
Click to collapse
Are yu flashing the proper kdz....??... I think im hearing this kind of error for the first tym nd i ve no idea abt it...!!
Sent from my LG-E975 powering Stock 4.1.2
Sure proper Kdz
Inviato dal mio LG-E975 utilizzando Tapatalk
fra6220 said:
I m sorry but even restarting in donwloading mode it doesn't work.... the app FREEGEE that unlock bootloader... works bad it put on my lg e975 the Nexus 4 bootloader that's why KDZ doesn't work well... I sent you a screen shot as you see kdz stops and in the processes you can see something with " Auth Matk" that's the creatore of the app probably during his last update he did a mess .... In the same moment Kdz stops my phone turn on like a nexus 4 bootloader look I put here the screen shot .. Don't know how to solve it. I m worried
Click to expand...
Click to collapse
1: freegee doesnt flash nexus bootloader
2: restarting to download mode resume flash, as it did for you. (only if you have nexus 4 bootloader)
3: any other problem is your problem.
Hi... I wanted to ask something... Is my phone completely useless? Can i fix it?
The problem (Now) is that phone won't boot normally (won't boot into android), and stays on Samsung logo (Shown in photo).. Then i try to boot normally (not in recovery), phone just keep restarting over and over again. Same with safe mode... I can boot into recovery.
Story goes:
I used Cyanogen mod 13 custom rom
Few days ago i was playing with my phone and it discharged completely... I turned it on with charger and continued to play.. Charger was broken (but kind of worked), so my phone turned off again... After an hour charging i tried to boot it... It showed my custom boot animation and phone just turned off.... I tried again, and it turned off again..... Third time i tried to turn it on, it showed cyanogen boot animation (that blue thing)....Then i booted to recovery mode and tried to install same rom, but it failed. Then i tried to boot phone again, but this time it just showed Samsung logo.... After 10 minutes i tried to install original Samsung rom using Odin, but it stayed on 3% for few hours and failed.... After this phone asked to fix it using Kies.. I tried, but it said "Kies does not support initializing" (something like that)... After this i tried to install CWM custom recovery with Odin (in download mode) and it failed.... After i turned off phone, i never turned it on again....
(i tried to install original rom using another USB cable)
Now then i try to connect phone to pc using USB cable, phone sometimes vibrates, and windows makes that connecting sound (then you connect something to pc it makes that sound) and windows says "installing device driver software" and "installing device"
Is there a way to fix my phone without changing motherboard?
EDIT: I managed to turn on phone using debrick.img (4.2.2), and flashed stock 4.4.2 rom.. Now I'm stuck on Samsung logo... Any ideas how to fix that? I will try installing stock rom for 4.2.2.
EDIT: Installing another stock rom didn't help :/ (Duh)... (Dumbest idea ever )
I can't access recovery mode
Download mode says:
PRODUCT NAME: GT-I9195
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
PS: Sorry for any mistakes... English isn't my first language
Deaddvz said:
Hi... I wanted to ask something... Is my phone completely dead? Can i fix it? (S4 Mini)
I used Cyanogen mod 13 custom rom
Few days ago i was playing with my phone and it discharged completely... I turned it on with charger and continued to play.. Charger was broken (but kind of worked), so my phone turned off again... After an hour charging i tried to boot it... It showed my custom boot animation and phone just turned off.... I tried again, and it turned off again..... Third time i tried to turn it on, it showed cyanogen boot animation (that blue thing)....Then i booted to recovery mode and tried to install same rom, but it failed. Then i tried to boot phone again, but this time it just showed Samsung logo.... After 10 minutes i tried to install original Samsung rom using Odin, but it stayed on 3% for few hours and failed.... After this phone asked to fix it using Kies.. I tried, but it said "Kies does not support initializing" (something like that)... After this i tried to install CWM custom recovery with Odin (in download mode) and it failed.... After i turned off phone, i never turned it on again....
(i tried to install original rom using another USB cable)
Now then i try to connect phone to pc using USB cable, phone sometimes vibrates, and windows makes that connecting sound (then you connect something to pc it makes that sound) and windows says "installing device driver software" and "installing device"
Is there a way to fix my phone without changing motherboard?
PS: Sorry for any mistakes... English isn't my first language
Click to expand...
Click to collapse
Try with debrick.img but in my oponion the probleme is the damaged motherboard
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Try with debrick.img but in my oponion the probleme is the damaged motherboard
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I don't know which debrick.img to use, i used for i9195 4.4.2, but it didn't work
Thanks for reply
The problem is the damaged motherbord because is rare to hard brick s4 mini, maube there is a soft brick. But it isn't bricked but you have damaged the motherboard with discharging to 0%
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Deaddvz said:
I don't know which debrick.img to use, i used for i9195 4.4.2, but it didn't work
Thanks for replay
Click to expand...
Click to collapse
There is a guide
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
Try to install a samsung based rom with aroma installer like v rom
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
The problem is the damaged motherbord because is rare to hard brick s4 mini, maube there is a soft brick. But it isn't bricked but you have damaged the motherboard with discharging to 0%
Inviato dal mio GT-I9195 utilizzando Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
The problem was that then i tried to install CWM to my phone it failed and i tried to restart my phone (it was still in download mode), it didn't turn on again... And it always stayed on charger (at least for an hour)...
EDIT: But i might damaged it...
Thanks for reply
I'm dumbass guys.... Debrick image worked... I installed stock rom, but now phone stays on samsung logo, (phone) trying to boot into recovery.(But stuck on it)... Any ideas?
Deaddvz said:
I'm dumbass guys.... Debrick image worked... I installed stock rom, but now phone stays on samsung logo, trying to boot into recovery.... Any ideas?
Click to expand...
Click to collapse
Wipe only data
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Wipe only data
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
If you mean wipe with recovery mode, i can't.... Phone stays on Samsung splash logo, trying to boot into recovery (it stuck)...
Deaddvz said:
If you mean wipe with recovery mode, i can't.... Phone stays on Samsung splash logo, trying to boot into recovery (it stuck)...
Click to expand...
Click to collapse
Try to flash a custom recovery
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Try to flash a custom recovery
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Tried, but nothing... Still stuck on it
Deaddvz said:
Tried, but nothing... Still stuck on it
Click to expand...
Click to collapse
Are you using debrick image 4.2.2 and have you flashed stock 4.4.2?
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Are you using debrick image 4.2.2 and have you flashed stock 4.4.2?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I (probably) have debrick.img for 4.2.2.. i installed 4.4.2 stock rom, then 4.2.2.... Nether of them worked....
debrick.img comes from here
Thanks for reply.
Deaddvz said:
I (probably) have debrick.img for 4.2.2.. i installed 4.4.2 stock rom, then 4.2.2.... Nether of them worked....
debrick.img comes from here
Thanks for replay.
Click to expand...
Click to collapse
Try to flash updated stock rom 4.2.2 with knox
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Try to flash updated stock rom 4.2.2 with knox
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
can you show me how?
Deaddvz said:
can you show me how?
Click to expand...
Click to collapse
You must download the new stock firmware 4.2.2 with knox 2.0.
I know an updated firmware but it is of spain country
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
You must download the new stock firmware 4.2.2 with knox 2.0.
I know an updated firmware but it is of spain country
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
can you give me link to it?
Deaddvz said:
can you give me link to it?
Click to expand...
Click to collapse
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks i will try it
DarkJoker360 said:
Sure
https://mega.nz/#!GsIn0aCK!C3i4EPt3wzlvU9EdDm0Psu8OCAQKRHMIIHCYkPtLkwQ
If at first boot the wify don' t work, flash another time the firmware without any wipe
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks for the link, but after i installed it, nothing changed... Phone still stuck on Samsung logo....
Deaddvz said:
Thanks for the link, but after i installed it, nothing changed... Phone still stuck on Samsung logo....
Click to expand...
Click to collapse
It boot in recovery mode?
Inviato dal mio GT-I9195 utilizzando Tapatalk
i have some doubts with this argument and i need help. I want to decrypt one plus 3 for flash other roms ( i red that twrp doesn't allow to write in memory if you aren't decrypted) . What i can do for decrypt it ? I red to format userdata partition in fastboot but after that the phone will boot? I tried a toolkit to decrypt it but it says is encrypted anyway. ... i need help for this pls
Inviato dal mio SM-N910F utilizzando Tapatalk
masterchif92 said:
i have some doubts with this argument and i need help. I want to decrypt one plus 3 for flash other roms ( i red that twrp doesn't allow to write in memory if you aren't decrypted) . What i can do for decrypt it ? I red to format userdata partition in fastboot but after that the phone will boot? I tried a toolkit to decrypt it but it says is encrypted anyway. ... i need help for this pls
Click to expand...
Click to collapse
Backup your data. Then In fastboot use the adb command, fastboot format user data.
numbere said:
Backup your data. Then In fastboot use the adb command, fastboot format user data.
Click to expand...
Click to collapse
I need to reflash something? Or after that just reboot?
Inviato dal mio SM-N910F utilizzando Tapatalk
masterchif92 said:
I need to reflash something? Or after that just reboot?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
You should do a search for, decrypt android device fastboot and read a few explanations.
numbere said:
You should do a search for, decrypt android device fastboot and read a few explanations.
Click to expand...
Click to collapse
Where i can read i searched everywhere on xda .... didn't found anything for op3. If i format userdata i can reboot ? The system is intact i think or not?
Inviato dal mio SM-N910F utilizzando Tapatalk
masterchif92 said:
Where i can read i searched everywhere on xda .... didn't found anything for op3. If i format userdata i can reboot ? The system is intact i think or not?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
If you would have done the search I suggested then this thread would have been on the first page.
http://forum.xda-developers.com/nexus-6p/help/phone-encrypted-flashing-rom-decrypt-t3285109
numbere said:
If you would have done the search I suggested then this thread would have been on the first page.
http://forum.xda-developers.com/nexus-6p/help/phone-encrypted-flashing-rom-decrypt-t3285109
Click to expand...
Click to collapse
I dont want to keep data i want to decrypt so i can only format user data and reboot? Or is needed to restore it ?
Inviato dal mio SM-N910F utilizzando Tapatalk
masterchif92 said:
I dont want to keep data i want to decrypt so i can only format user data and reboot? Or is needed to restore it ?
Inviato dal mio SM-N910F utilizzando Tapatalk
Click to expand...
Click to collapse
If I understand you correctly, you simply want to leave your device decrypted in order to flash roms on the fly without the need to format. If this is true the other user correctly informed you to use fastboot to format your userdata. After that you will need a custom kernel which has the auto encrypt flag disabled. This will stop the stock rom from auto encrypting. I have not searched the thread but I imagine some after rom market roms will have this feature included.
I believe removing lockscreen security will allow you to flash roms and kernels. Please correct me if I am wrong.
Sent from my ONEPLUS A3003 using Tapatalk
vickyjusme said:
I believe removing lockscreen security will allow you to flash roms and kernels. Please correct me if I am wrong.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
That's what i did when i switched from OOS to CM13. That works perfect and my Phone is still encrypted. But if i flash a newer Snapshot, shoud i remove the lockscreen Security again or is it fine like it is. I mean, i got fingerprint security but it doesnt want a PIN when i reboot my phone.
Good Morning All,
So i've been tried installing a stock rom and TWRP using Odin and they both appear to be installing properly, I Get the green Pass Status.
However though absolutely nothing changes on the device.
what could be the problem here "
Diizzayy said:
Good Morning All,
So i've been tried installing a stock rom and TWRP using Odin and they both appear to be installing properly, I Get the green Pass Status.
However though absolutely nothing changes on the device.
what could be the problem here "
Click to expand...
Click to collapse
Which driver you have?
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Which driver you have?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I'm not exactly sure, how do i go about checking ?
The device seems to be recognizing properly though.
Thank you very much for taking the time to reply.
DarkJoker360 said:
Which driver you have?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
The driver installed is Samsung Usb Driver v1.5.60.0
Update: I tried flashing TWRP recovery via Heimdall and it appears to have completed successfully saying "RECOVERY upload successful" but when i reboot immediately after into Recovery mode it still sticks at the TWRP 3.0.0-0 Splash Screen then attempts to reboot normally which as mentioned earlier also sticks on samsung slash screen
Diizzayy said:
Update: I tried flashing TWRP recovery via Heimdall and it appears to have completed successfully saying "RECOVERY upload successful" but when i reboot immediately after into Recovery mode it still sticks at the TWRP 3.0.0-0 Splash Screen then attempts to reboot normally which as mentioned earlier also sticks on samsung slash screen
Click to expand...
Click to collapse
Deactive the antivirus
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Deactive the antivirus
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
Both Firewall and Antivirus are already de-activated