About 2 weeks ago my touch function stopped responding. I was away from the night and it died shortly after and I did not have my charger. The next day once I got it charged up, I powered it on and was able to get a few minutes of working touch sense... then the touch died completely. I opened it up to make sure all of the cables were intact- Everything inside looked perfect except for the little latch that holds down on the digitizer cable was broken off, but that was already like that for a while and everything was still working.) After some fiddleing and no luck, I decided I probably just need to get a new digitizer--- It would be easy to disassemble because my lcd and digitizer were both oem from a drop in the potty a few minths back, which only affected the screen. So today the digitizer came in and I replaced it- NO LUCK! Every once in a while I get a tiny spark of scroll functionality or the bottom of the screen while in landscape mode becomes touchable for a few seconds, but otherwise dead.
Does anyone know what the problem could be since I have already replaced the digitizer???
Right now I am only able too hook up my internet sharing and etc. through MyMobiler.
Thanks
Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input
Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.
No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.
My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?
I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?
Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.
Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?
Hello Nexans,
Long story short:
I was applying SGP's flex to my phone yesterday. Too much water maybe, my phone started acting weird after installation, really dimmed display, touch screen not registering touch, and etc.
So I opened up the phone per ifixit's instruction, attempting to see if there's really any water in there so I can dry the components up.
At the time of opening it up, didn't notice any water at all, while the screen still remains not responding. At the end, the phone finally failed to boot (white Google screen looping). So I put everything back on, and finally leave it looping on my desk while I went out trying to have some fun in order to blow away this Saturday night sadness.
Magically, when I returned home after ~5 hrs, the phone is in the system and the touch screen works perfectly again. Also, the screen is showing images normally again. I happily went to bed with my phone.
This [sad] morning, volume button won't work. Opened it up, found that the volume switch (which was soldered onto the mobo) was ripped off (probably by careless me). Refer to this pic here. EDIT: sorry I still can't post outside link.
Here's the image: guide-images.ifixit.net/igi/2k6S4vvKPZh2IsB2.huge
Now I'm left alone: the phone is a imported GSM, seemingly not supported by anyone in the U.S. right now. Moreover, since the volume switch is soldered onto the mobo, and I am very sure I will ruin the phone if I try to re-solder the switch onto the mobo (it's some finest soldering on there), not to mention that the Cable Ribbon of the volume switch seems to be ruined as well, I think my only option is to get a totally new mobo that has volume switch soldered onto it.
To summarize:
1.Do I need a new mobo, if I find no one to help me repair the phone?
2.Where can I get a new mobo? (searched on eBay w/o results)
3.Will changing the mobo affect anything? I assume the data and system would be lost, but how about the identity of my phone?
4.If there's one agent in the U.S. that you think would take care of this uncostly (~$100?), who would you refer? Maybe Verizon, Samsung, or someone else?
5.If all of the above attempts fail at the end, I'll be considering selling it at a deep discount to someone who's got his way of restoring this phone, where would you recommend for me to go find such a talented Nexus lover? Will eBay fulfill this purpose the best?
Finally, thanks for you, the fellow members, for your help in advance. I hate myself for opening up the phone, now, thinking that the phone may have recovered for good w/o being opened up by me. Now that it has recovered with a broken volume switch in its body, making this issue much more complicated
Again, thanks...
shoulda turned off the phone right after it started acting funky and put it in a bag a rice
it sounds like you jumped the gun and opened the phone prematurely. How long did you wait to open up the phone after you installed the screen guard?
As far as your situation, I would probably cut my losses, get what I can out of it on eBay and buy another one.
Sent from my GSM Galaxy Nexus using Tapatalk
mush03 said:
shoulda turned off the phone right after it started acting funky and put it in a bag a rice
Click to expand...
Click to collapse
Should have I also shouldve stayed with a dry apply film. Being a perfectionist, I almost knew I would ruin the phone by over spraying the application solution for a easier and better application
Ulver said:
it sounds like you jumped the gun and opened the phone prematurely. How long did you wait to open up the phone after you installed the screen guard?
As far as your situation, I would probably cut my losses, get what I can out of it on eBay and buy another one.
Sent from my GSM Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Actually, immediately. I didn't know the gaps around the glass screen is also the entrance for the water to get into the phone. I thought only headset speaker could let some water into it. After disassembled the phone, I realized that the water can easily get into the phone thru the gap, which leads the water right onto the mobo underneath the glass... Again, I didn't notice any water inside the phone, but i could be just moisture that's playing some nasty game here. I also did some intensive swing and tossing of the phone to get water out, until there's no water coming out.
Anyhow, I just went to Verizon store, and they said they wouldn't touch anything GSM, and said the only option for me seems to contact Samsung. Or as you said, I could sell it on eBay. Don't know how much it's worth though
I had to open up my Gnex last week because i dropped it in a puddle of water while getting out of my car...
If i remember correctly, the vol rocker is glued to the internal part that comes out with the screen and most of the electronics, so i cant imagine how you would have torn it off...
Its connectected to the main pcb via a connector though, sure you didn't just unplug the connector??
You could also try to go without the volume rocker, use some kind of widget for volume control, not ideal but cheaper than a new Gnex
Ooo, I'm sorry for both of us...
Yes, the volume switch is double-side taped, but the other end (the cable ribbon itself) is soldered onto the back of the mobo in my phone. I don't know how or what force ripped it off of the mobo. The cable ribbon is torn pretty harshly... I'll upload a pic when I make past the 10 posts and "unlock all capabilities"..
Also, did you notice any "sequela" after the incident? Does your phone function good now? There's time that on my phone the touch screen does not respond/register touch anymore suddenly. I usually just leave it standby with screen off. Usually, after 1+ hr, when I turn the screen back on, the touchscreen works fine...
Driving me crazy, this bad luck.
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
cswithxda said:
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
Click to expand...
Click to collapse
Install the app called quickboot, it lets u go direcrly into recovery or bootloader without holding volume keys.
Thank you sir, I'll give it a try!
OOPS.. I'm not rooted...so it's a no-go
Hey cswithxda, have you found a way to fix it without replacing the mobo?
I live in Brazil, a friend of mine brought one bought at Negri electronics at US for me. It suffered an accident (part of it involves someone pushing down a window over it) and the screen cracked.
I've sent it back to Negri for RMA Repair to fix the screen and they did it, but before shipping back, found that the volume buttons weren't working. They canceled the shipment and found out that the volume cable was broken (the screen crack was near to the volume buttons, so I guess it wasn't them that broke it while fixing the screen).
Well, I've actually paid for the screen repair and ship back, but they claim that their repair facility was unable to fix the volume... any light over this?
cswithxda said:
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
Click to expand...
Click to collapse
If you have all the drivers type 'fastboot reboot bootloader' in the command prompt
Sent from my Galaxy Nexus using xda premium
tinsukE said:
Hey cswithxda, have you found a way to fix it without replacing the mobo?
I live in Brazil, a friend of mine brought one bought at Negri electronics at US for me. It suffered an accident (part of it involves someone pushing down a window over it) and the screen cracked.
I've sent it back to Negri for RMA Repair to fix the screen and they did it, but before shipping back, found that the volume buttons weren't working. They canceled the shipment and found out that the volume cable was broken (the screen crack was near to the volume buttons, so I guess it wasn't them that broke it while fixing the screen).
Well, I've actually paid for the screen repair and ship back, but they claim that their repair facility was unable to fix the volume... any light over this?
Click to expand...
Click to collapse
Sorry I can't help buddy, at the time I owned the device, it was still pretty new, so I couldn't find a source that actually sells GNex motherboard. I think the only way to fix a ripped rocker button is to replace mobo if you don't find anywhere to solder it for you.
Important part is this, for whoever got the chance, buy it from Amazon! The rep was kind enough to issue me an RMA after knowing my ripped volume rocker is my own fault, and while I was actually trying to ask him about where to send it to fix. They just gave me an RMA and let me send it back and get anything else I want. Amazon customer service another miracle!
nbeebe24 said:
If you have all the drivers type 'fastboot reboot bootloader' in the command prompt
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the help! altho i returned the device
So I dropped my S3 during the 5 minutes it took to take it out of it's case and wipe some under-the-protector dust off.
When i picked my phone back up the screen would not come on. Out of curiosity my wife called me and the screen lit up and worked, except everything had a green tint. Worked fine (other than green tint) for about 3 hours until we went to bed.
I life it on the charger all night and the alarm woke me up in the morning, but the screen would not come back on.
It's been 3 days and still no screen.
Touch still works fine. I can receive calls by swiping. I can press power and swipe to unlock and use SVoice to make calls.
What could cause this? Is it possible for the LCD to go out without the touch? Is it possible for the LCD to go out without busting (when it was green, it was a clean screen, no hints of shattering)? What is the most I should be willing to pay, without getting ripped off, to have it repaired?
Yes it is very possible to only damage the LCD. You'll have to replace the whole assembly, around $120 for the part. Probably still a good bit more to use a repair service. Or buy a used device on eBay and swap parts.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
So during my holiday my HOX got splashed with a bit of water from a wave. The battery was running on fumes and, when I looked at it, the phone was dead. It did turned on later while in my pocket and I happened to press the power button.
I let it dry on rice and nothing. I made the potential mistake of trying to charge it so it would heat up and it wouldn't charge. I then bought another mobile and, just to try it, I took opened the HOX and hoovered. Nothing.
Miracle happened yesterday when, just for kicks, I tried the charger again. It power up!! Everything seems fine, no visible screen damage, wifi works, everything works just fine but... screen won't respond to touch on the very bottom, say, the capacitive and menu buttons (the ones just above the capacitive ones).
What do you guys think? Is the screen dead there, maybe I didn't put the screen back properly or should I wait as some moister might yet be there?
Cheers!
Kutusov said:
So during my holiday my HOX got splashed with a bit of water from a wave. The battery was running on fumes and, when I looked at it, the phone was dead. It did turned on later while in my pocket and I happened to press the power button.
I let it dry on rice and nothing. I made the potential mistake of trying to charge it so it would heat up and it wouldn't charge. I then bought another mobile and, just to try it, I took opened the HOX and hoovered. Nothing.
Miracle happened yesterday when, just for kicks, I tried the charger again. It power up!! Everything seems fine, no visible screen damage, wifi works, everything works just fine but... screen won't respond to touch on the very bottom, say, the capacitive and menu buttons (the ones just above the capacitive ones).
What do you guys think? Is the screen dead there, maybe I didn't put the screen back properly or should I wait as some moister might yet be there?
Cheers!
Click to expand...
Click to collapse
This is a flashback to me. Same thing happened to me few weeks ago - first 3 bottom buttons stoped working, and now 7 days ago part of touch screen is not working anymore. I am going to replace lcd+digitizer+frame, lucky me nothing else need to be fixed. And IMHO trying to heat closed HTC when water was in it doesn't make a sense as a water will condense (as it is closed) so it would make more damage. Oxidation sucks :/
I do have the SIM slot opened but yeah, that's a tinny opening, not much space for water vapour to escape... it's been a few weeks since I thought it had died though, it's pretty amazing to me that it came back at all. Some tough phones, these...
Anyway, I think I'll try to take the screen out again, I wasn't too careful putting it back in because I saw it wasn't charging or powering up or anything at all.