Touch still unresponsive after digitizer replaced - Touch Pro2, Tilt 2 Windows Mobile General

About 2 weeks ago my touch function stopped responding. I was away from the night and it died shortly after and I did not have my charger. The next day once I got it charged up, I powered it on and was able to get a few minutes of working touch sense... then the touch died completely. I opened it up to make sure all of the cables were intact- Everything inside looked perfect except for the little latch that holds down on the digitizer cable was broken off, but that was already like that for a while and everything was still working.) After some fiddleing and no luck, I decided I probably just need to get a new digitizer--- It would be easy to disassemble because my lcd and digitizer were both oem from a drop in the potty a few minths back, which only affected the screen. So today the digitizer came in and I replaced it- NO LUCK! Every once in a while I get a tiny spark of scroll functionality or the bottom of the screen while in landscape mode becomes touchable for a few seconds, but otherwise dead.
Does anyone know what the problem could be since I have already replaced the digitizer???
Right now I am only able too hook up my internet sharing and etc. through MyMobiler.
Thanks

Related

Screen died?

Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input
Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.
No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.
My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?
I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?
Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.
Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?

Touchscreen freeze... ! Help please

Hello guys,
Around a week back, my MT3G slide touch screen got unresponsive for a while. I rebooted around 2-3 times and thankfully the touchscreen worked fine.
Now, I am getting this unresponsive touchscreen more often and I have to pull out the battery from the phone and turn it on again. The last time this happened I had to do this about 8-10 times before the touchscreen would respond. I have no problems with my keypad, 4 buttons or the trackpad, just the touchscreen
I also did a factory reset and erased all the data that I had on my phone and SD card.
EDIT : I just figured that the touchscreen sometimes starts working if you slide out the keypad. But once the keypad is slid back in, it's back to being unresponsive.
My phone is out of warranty so I can not get a replacement I think.
Does anyone know what could be the problem for such frequent touchscreen unresponsive behavior. After a couple of reboots, everything returns to normal.
Any ideas ? I would appreciate any help..
Thanks a lot...
you got a broken ribbon
Hi there,
Do you mean the slide rail flex cable or the digitizes flex cable ?
Thanks
flex ribbon cable
I would say it's the flex ribbon cable which connects the motherboard piece to the screen and home button piece. I've purchased several "broken" my touch 3g slides from ebay that had either the screen shift problem when the keyboard was slid out or screen that was unresponsive/wouldn't come on. Both problems were fixed by purchasing an inexpensive flex ribbon cable like item 170747702766 on ebay. I watched a video and followed along on youtube /watch?v=-jgFHuVWlig (stop at 7:27 and reverse the process). However, my most used mt3gs is now starting to have the screen shift problem again and needs a new cable... it didn't last as long as I had hoped.
Did you try any custom roms?. reflashing/updating the device?
I guess it must be some driver issue!..
i have the same problem.
Could you fix it?
Seems to be a common issue. I've described the process of replacing the flex ribbon cable here - it's not a rocket science. Or just bring the phone to a serviceman who will do the same (if you lucky enough he could even have a spare cable, but I'd advice you to have your own bought from ebay to be sure).
Touch Screen freeze
Saem persun said:
Seems to be a common issue. I've described the process of replacing the flex ribbon cable here - it's not a rocket science. Or just bring the phone to a serviceman who will do the same (if you lucky enough he could even have a spare cable, but I'd advice you to have your own bought from ebay to be sure).
Click to expand...
Click to collapse
Thank you for the information but another questiion that I do have is where would one get a serviceman that would repair or help repair a phone, usually the technicians are attached to the different cellular carriers and if one dosen't have a contract with them they are not likely to help repair your phone even if it is for a fee. Do you know any serviceman?

[Q] LCD not working after screen replacement

I dropped and cracked my glass last week. Yesterday I had a guy replace the glass, and it worked fine afterwards for several hours. This morning when I woke up I find that the display won't turn on, though the touch buttons light up fine, and the glass is separated a little from the LCD. Actually, sometimes if I power off the phone for a few minutes then turn it back on, it the display will flash "SAMSUNG" for a second before going off as it boots.
So did the guy damage my LCD? Is it possible that it just has a loose connection or something?
rcurtis13 said:
I dropped and cracked my glass last week. Yesterday I had a guy replace the glass, and it worked fine afterwards for several hours. This morning when I woke up I find that the display won't turn on, though the touch buttons light up fine, and the glass is separated a little from the LCD. Actually, sometimes if I power off the phone for a few minutes then turn it back on, it the display will flash "SAMSUNG" for a second before going off as it boots.
So did the guy damage my LCD? Is it possible that it just has a loose connection or something?
Click to expand...
Click to collapse
Sounds like loose connection. I would go back to that guy and get him to fix it/take a look at it.

Screen not working. Touch does work. Not cracked. Not busted. Ideas?

So I dropped my S3 during the 5 minutes it took to take it out of it's case and wipe some under-the-protector dust off.
When i picked my phone back up the screen would not come on. Out of curiosity my wife called me and the screen lit up and worked, except everything had a green tint. Worked fine (other than green tint) for about 3 hours until we went to bed.
I life it on the charger all night and the alarm woke me up in the morning, but the screen would not come back on.
It's been 3 days and still no screen.
Touch still works fine. I can receive calls by swiping. I can press power and swipe to unlock and use SVoice to make calls.
What could cause this? Is it possible for the LCD to go out without the touch? Is it possible for the LCD to go out without busting (when it was green, it was a clean screen, no hints of shattering)? What is the most I should be willing to pay, without getting ripped off, to have it repaired?
Yes it is very possible to only damage the LCD. You'll have to replace the whole assembly, around $120 for the part. Probably still a good bit more to use a repair service. Or buy a used device on eBay and swap parts.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

Screen troubles after a tumble

The screen didn't break but after it fell it did look like the bottom left hand corner was visible darker than the rest of the screen. Today, almost a week after the initial tumble I decide to see if restarting it would fix the problem and it did but it lead to bigger problems. Now if the screen turns off for any reason it stays off until I do a hard reset by holding the power button for 10 seconds. When I try and turn it back on the captive buttons light up but nothing else happens. When the screen is on after a hard reset I'm unable to adjust the brightness level when I pull down the top.
How likely is it that the LCD ribbon came loose? It seemed like there were issues with it before.
I'm at a complete loss for what could be wrong with it. Any advice for recommendations would be greatly appreciated.
I'm really hoping I don't need any major repairs or even a new tablet because I can't afford much of anything.
My grandson recently had a tantrum and threw down my tablet. Afterwards the screen was flickering so I decided to restart it to see if that would fix it. The screen never came back on although I could hear it start up sounds and the capacitive buttons would light up. To make the story short, i contacted Samsung and they said it would be a standard $200 repair fee unless they found a loose cable. Today my credit card was charged $59 dollars by Samsung. I guess it was just the loose cable. Note that they sent me a prepaid UPS label to send it back to them and they are shipping it back to me all within that $59 charge. Well worth it for a great tablet.
Sent from my SM-T800 using Tapatalk
You got to remove the back and disconnect the lcd and battery cables and reconnect them after 10 seconds and all should be good. This happened to me after I got the screen of death. I dropped it and the screen did it again. So I just disconnected them both, reconnected, and everything works fine.
bh87771 said:
You got to remove the back and disconnect the lcd and battery cables and reconnect them after 10 seconds and all should be good. This happened to me after I got the screen of death. I dropped it and the screen did it again. So I just disconnected them both, reconnected, and everything works fine.
Click to expand...
Click to collapse
Can you recommend any guides & kits that I can purchase from amazon to help me take the tablet a part?
YouTube it. It is real easy removing the back, patience is needed.
Yes go to youtube for the disassembly videos. I bought a generic repair kit from ifixit for the tools. Though guitar picks can also work well.
Basically when you drop it a cable gets loose. You just have to disconnect and reconnect it.
Mine was very clearly only half connected (not in the picture which is from when I replaced the battery). I also disconnected and reconnected the battery and lcd connectors to make sure. But the loose cable was on the top left and didn't seem to be one of those. Just reseat them all to be sure.
There is another thread on here about disassembly which has pictures that I used as reference.
I've had mine apart twice. Once when I dropped it and once when I replaced the battery for poor battery performance (this really was sooo worth it).
I just received a used Note today and was about to initiate a return because the screen was completely dark but the rest of the tablet seemed to be working, including touch. Removed the back, reseated the ribbon cable, and everything's good now.
Strange start to my experience with this tablet.

Categories

Resources