Develop Bugs

Touch still unresponsive after digitizer replaced

About 2 weeks ago my touch function stopped responding. I was away from the night and it died shortly after and I did not have my charger. The next day once I got it charged up, I powered it on and was able to get a few minutes of working touch sense... then the touch died completely. I opened it up to make sure all of the cables were intact- Everything inside looked perfect except for the little latch that holds down on the digitizer cable was broken off, but that was already like that for a while and everything was still working.) After some fiddleing and no luck, I decided I probably just need to get a new digitizer--- It would be easy to disassemble because my lcd and digitizer were both oem from a drop in the potty a few minths back, which only affected the screen. So today the digitizer came in and I replaced it- NO LUCK! Every once in a while I get a tiny spark of scroll functionality or the bottom of the screen while in landscape mode becomes touchable for a few seconds, but otherwise dead.
Does anyone know what the problem could be since I have already replaced the digitizer???
Right now I am only able too hook up my internet sharing and etc. through MyMobiler.
Thanks

Screen died?

Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input

Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.

No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.

My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?

I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?

Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.

Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?

[Q] LCD not working after screen replacement

I dropped and cracked my glass last week. Yesterday I had a guy replace the glass, and it worked fine afterwards for several hours. This morning when I woke up I find that the display won't turn on, though the touch buttons light up fine, and the glass is separated a little from the LCD. Actually, sometimes if I power off the phone for a few minutes then turn it back on, it the display will flash "SAMSUNG" for a second before going off as it boots.
So did the guy damage my LCD? Is it possible that it just has a loose connection or something?

rcurtis13 said:
I dropped and cracked my glass last week. Yesterday I had a guy replace the glass, and it worked fine afterwards for several hours. This morning when I woke up I find that the display won't turn on, though the touch buttons light up fine, and the glass is separated a little from the LCD. Actually, sometimes if I power off the phone for a few minutes then turn it back on, it the display will flash "SAMSUNG" for a second before going off as it boots.
So did the guy damage my LCD? Is it possible that it just has a loose connection or something?
Click to expand...
Click to collapse
Sounds like loose connection. I would go back to that guy and get him to fix it/take a look at it.

LCD screen keeps disconnecting.

I dropped my phone the other night onto a wooden floor, and the entire phone was still intact. But now the screen will sometimes just not turn on, but the bottom row of lights still turns on and I can unlock the phone and reset it. Sometimes the screen will work after resetting but then later glitch up. I have removed it from the case but couldn't get the LCD cable without feeling like it would break the phone. But there seems to be nothing wrong with the connection pins that I can view from the side.
Everywhere that I've rang to get repairs for it straight up says that it is a screen replacement, but I know that the LCD and digitizer still works and that the phone does turn on.
What's the best way to repair it?

[SOLVED] Black Screen Issue

Hi. I am not sure this is the BSOD problem that others have had.
I bought a second hand i747. It came with 4.3. It will work fine for a few minutes when first turned on, then the screen will go dark. The menu and back buttons stay lit, and the touchscreen still works, the LCD just cuts off.
If I hit the power button, it sleeps the phone. When I hit again, the screen will come on, but only for about 5 seconds, then it's black again. Everything works, just black screen.
Is it possible for it to overheat or something? It doesn't feel hot at all, but if I turn it off and leave it for awhile, it will again work for about 2-3 minutes, then only about 5 seconds at a time again.
I swapped batteries, and it's the same. The battery had pink on it. I opened it up, and none of the other stickers showed water exposure, and the board itself was clean.
It has stock 4.3, and is not rooted.
I did go to phone settings and turned off the "darken screen during calls" checkbox.
I am wondering if the proximity sensor heats up and shuts the screen off. Grasping at straws I suppose.
Any idea of how to fix this?
Thanks

Perhaps a bad capacitor in the digitizer/lcd assembly? My TV had an issue with a bad capacitor that would cause the screen to blank out after a few minutes???
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I'll try swapping boards in it later, and maybe at least narrow down if it's the board or the screen assembly. I have an extra proximity sensor I could swap, but it doesn't seem like it's that to me.
thanks, will post more after the board swap

Update: I switched boards (different carriers), and I could not replicate the problem in either phone. I had hoped that would show that either the board or the LCD assembly was bad, but I didn't learn anything useful either way.
I put the boards back in their respective bodies. It still happens now, but not as often. It also appears to be totally random. I did switch batteries in the problem phone, and it doesn't seem as bad. I will try another battery switch and see if that helps it more.
When the screen goes dark, the menu and back buttons are lit. When it went out last night, I could see that there was still some faint background light that I can't see in the day. I pulled up Youtube and did a video, and when the screen went dark, I could still see movement, but couldn't make anything out. So, the phone is still going in the background.
If I push the power button, it sleeps, then push it again, and it wakes up just fine. Sometimes I have to do that 4 or 5 times for the screen to stay on. Sometimes it goes dark after 10 minutes of use, sometimes a half hour, sometimes just a few.
Any help is appreciated.

Well, right before throwing the phone into the wall, I noticed a partially removed liquid exposure indicator. I pulled the phone apart to check the motherboard.
In the process of taking it apart, I forgot to take out the SD card. In so doing, it pulled the sim/sd card module off the motherboard. Low and behold, there was a very light corrosive glaze in a few spots under the module.
So, I got out the 99% IPA, and a toothbrush, and cleaned the whole entire board. Since then, it seems to be working fine.
I don't know exactly what part getting cleaned fixed it, because I just cleaned the whole board.
Anyways, maybe that'll help someone with inexplicable issues downstream.

Thanks for following up with how you fixed the problem. In retrospect, water damage makes sense.
I dropped a Captivate into an ice chest full of melted water last year. I immediately pulled it out and the phone was mostly okay for a while but then the microphone didn't seem to work so well and occasionally the right third of the screen wouldn't respond to touch until I cycled the screen on and off. The water damage sticker and phone interior showed no signs of water.
I will probably sell the old captivate but with full diclosure about the history. Would have been nice if the seller had done the same for you.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Thanks, I should have thought of it sooner, but it didn't seem to have any signs of water damage otherwise.
I ordered the 99% IPA online, because I couldn't find any locally. It works wonders with previously wet boards. You might be able to bring it back.