Develop Bugs

Broken screen on my artemis

Hi you guys, does anyone know if you disamble the artemis easy and replace the touch screen? ( i was mad and smashed it, i kind of regret it, i know i shoud get anger management !). The phone is working fine, since i can connect it to my pc, the only problem the screen is black!
any guys any ideas or experience?
thank you.

hi, depending on which part you have broken, will depend on how much it will cost. Its fairly easy to change tho. If you have a look in the Wiki there is a guide to repairing the Artemis.
There are two parts to the screen the 'touch' bit on top (digitiser) and the actual LCD screen. If it is just the touch bit that has broken, then you can get a replacement one for around £7 on eBay. If the LCD has broken (which i am guessing it has caus u said it is just a black screen) then you can get a digitiser and a LCD for around £30. It is easier to replace both, as it is just a unit which is stuck in with double sided tape. WARNING: the ribbon cable which plugs into the main board from the screen is VERY fragile!
Hope this helps

broken screen
there are two different screen modules available for the Artemis. They are NOT interchangeable. In one case touch-screen module and LCD screen are seperate and in the other case they are both integrated into one module.
regards,
Bjorden

your gonna have to open it like i did, and find out which screen!.. also the touch screen is replaceable but its a ***** to do.. just get the whole screen on ebay 40 usd lcd and touchscreen very simple plug and play

htc p3300 display

where can i find display for artemis?

try ebay

thank you

http://mobile.brando.com.hk/

i just replaced my screen with one ebay 30$ screen(hong kong) - works nicely.
Just be sure that it includes touch screen as well - most of the case they come together.

Did this take long to do?
Any problems in the process of changing screens over?

southeastblue said:
Did this take long to do?
Any problems in the process of changing screens over?
Click to expand...
Click to collapse
Some ebay screen offers include the T6 screwdriver so you can change the screen DIY way.
I ordered screen without the T6 and choose the easy way out - local gsm and phone shop did the job ( cost in estonia $30 dollars ) .
edit: one thing that bothers me - in direct sunlight it impossible to see the screen..even when the brightness is at its full potential. I dont remember was that the case also with the old screen.
Its really hard to read anything from the screen outside. Other wise the screen is crisp and looks the same as the old one.

I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.

ElVikin said:
I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.
Click to expand...
Click to collapse
i ordered another screen from ebay ( a little more expensive - promised to be ORIGINAL HTC screen?! = ). Will let you know how this works in direct sunlight.
Users with original screen - can you read your HTC screen without problems in direct sunlight if the brightness is at full level?

you can see more here:
http://www.ssmoviles.com/product_info.php?products_id=355

ebay screen
just try ebay with 'display p3300', I got mine for about 40 us dollar shipping included. it works fine and there are a lot of manuals for dissassembling the artemis. just google: 'disassemble htc p3300'.
watch for the following: the artemis doesn't have torx 6, but torx 5!!! trox 6 won't work.

I was on service with my Artemis and is not the display with problems, the motherboard is broken. Where can I find such part?

You can find the LCD screen with touch screen at http://www.RepairsUniverse.com. It includes fitting guide and ships direct from the US, not from HK.

ElVikin said:
i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer
Click to expand...
Click to collapse
It doesn't involve any soldering to change only the touchscreen as far as I can see. You can plug the touchscreen cable in the display, just like you plug the display cable in the mainboard.

i have one id jhonyvyrus on yahoo

[Q] HTC touch pro 2 T-Mobile

Hello I'm new here. My name is Damir and I have HTC touch pro 2 T-Mobile nice phone
I have few questions
I have problem with flex cabel, I want to chage it but I can't find to buy. Is the same flex like in HTC tilt 2?
I have problem with housing, cracked at the corner. I can't find anywhere to buy used (secondhand) or new one. I wonder can I put housing from HTC Tilt 2 and change touchscreen (digitizer not display) or I must find original housing ((
Help plsss ))

no one? If someone has a defective cell phone I would like to buy (with undamaged housing)

touch-pro2 said:
Hello I'm new here. My name is Damir and I have HTC touch pro 2 T-Mobile nice phone
I have few questions
I have problem with flex cabel, I want to chage it but I can't find to buy. Is the same flex like in HTC tilt 2?
I have problem with housing, cracked at the corner. I can't find anywhere to buy used (secondhand) or new one. I wonder can I put housing from HTC Tilt 2 and change touchscreen (digitizer not display) or I must find original housing ((
Help plsss ))
Click to expand...
Click to collapse
The Tilt 2 housing might fit. I compared an ATT one to tmobile one and it looks like the AT&T has an extra small button on the side but it doesn't look like it's big problem. I didn't check the flex yet. If you want to buy an ATT full housing you'll need one that has the middle frame with it, the one that the motherboard snaps into. There are some out there that don't have it.

So I need Full housing from tilt 2, digitizer (touch screen). The display, motherboard, flex, and everything else inside is the same, all the rest will fit

touch-pro2 said:
So I need Full housing from tilt 2, digitizer (touch screen). The display, motherboard, flex, and everything else inside is the same, all the rest will fit
Click to expand...
Click to collapse
It looks like it might, but I can't guarantee that it will. Here is an original tmobile housing but it'stoo expensive: http://www.htcrepairparts.com/full-coverhousing-for-htc-touch-pro-tmobile-p-2886.html

It is expensive :/ it not be bad to try to install this housing of tilt 2 but I'm afraid it won't fit, speaker, front key, display and rest :/

[Q] Screen replacement

Hi. I just got a used HTC One X phone, but the digitizer is cracked. I understood that I can't change only the digitizer, so I wanna buy a digitizer+LCD display assebmly. Now I have a problem. Reading on the internet I found that there are 2 different screens, with green and yellow flex cable. Which one is for my phone? I have the international version with Tegra 3.

CaracalSef said:
Hi. I just got a used HTC One X phone, but the digitizer is cracked. I understood that I can't change only the digitizer, so I wanna buy a digitizer+LCD display assebmly. Now I have a problem. Reading on the internet I found that there are 2 different screens, with green and yellow flex cable. Which one is for my phone? I have the international version with Tegra 3.
Click to expand...
Click to collapse
if you are going to change it youself then best to open your hox and match the serial number

My idea was to open the phone after I have all parts (want to change the housing and display assembly) from ebay. I saw that they ship the parts with tools, because now I don't have any.

Sorry for double post, but I wanted to tell you that I managed to change my LCD display. I bought this one: http://www.ebay.com/itm/111039746173?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 and I am very glad. I didn't noticed any contrast/color differences. Everything worked as it should, except vibrate, which doesn't work anymore and I don't know why, I triple checked the connectors of the vibrator.
If someone want to change by himself, just go to service I had a very hard time to take the phone apart (I also changed the back case cover).
Oh, the old LCD had panel_vendor and panel_id 944701. Same with the new one.

lg g3 screen q's... lines on screen and seperate issue "bubble" between lcd and glass

lg g3 screen q's... lines on screen and seperate issue "bubble" between lcd and glass
Please see picture... 2 different phones I bought used, as-is
The phone that has vertical lines in the screen is funny. I know the most likely response will be: replace the lcd/digitizer assembly and it will be fixed, but I just want to make sure I cover all the bases before going there. I pulled it apart and reseated the connectors, which didn't change anything...
**the interesting thing is that when it first boots up (first second or 2), the lg / life is good logo displays normally with no vertical lines...then the lines show up as in the picture. The digitizer (touch) works normally on this phone
anything else I can check with the lcd or ribbon cables?
copy and paste picture I can't post it due to being a new user, if anyone would be kind enough to repost it in a reply that would be great!
imgur.com/6NcTqRn
On the other phone (which touch and lcd work fine on) it looks to me like perhaps the digitizer was replaced and is too close to the lcd in the center (touching) or maybe water damage or something like that but not sure...
any advice on how to carefully try to repair this?
Both phones were purchased used as=-is with no history so no warranty or anything like that obviously.
Any input very greatly appreciated