Hello I'm new here. My name is Damir and I have HTC touch pro 2 T-Mobile nice phone
I have few questions
I have problem with flex cabel, I want to chage it but I can't find to buy. Is the same flex like in HTC tilt 2?
I have problem with housing, cracked at the corner. I can't find anywhere to buy used (secondhand) or new one. I wonder can I put housing from HTC Tilt 2 and change touchscreen (digitizer not display) or I must find original housing ((
Help plsss ))
no one? If someone has a defective cell phone I would like to buy (with undamaged housing)
touch-pro2 said:
Hello I'm new here. My name is Damir and I have HTC touch pro 2 T-Mobile nice phone
I have few questions
I have problem with flex cabel, I want to chage it but I can't find to buy. Is the same flex like in HTC tilt 2?
I have problem with housing, cracked at the corner. I can't find anywhere to buy used (secondhand) or new one. I wonder can I put housing from HTC Tilt 2 and change touchscreen (digitizer not display) or I must find original housing ((
Help plsss ))
Click to expand...
Click to collapse
The Tilt 2 housing might fit. I compared an ATT one to tmobile one and it looks like the AT&T has an extra small button on the side but it doesn't look like it's big problem. I didn't check the flex yet. If you want to buy an ATT full housing you'll need one that has the middle frame with it, the one that the motherboard snaps into. There are some out there that don't have it.
So I need Full housing from tilt 2, digitizer (touch screen). The display, motherboard, flex, and everything else inside is the same, all the rest will fit
touch-pro2 said:
So I need Full housing from tilt 2, digitizer (touch screen). The display, motherboard, flex, and everything else inside is the same, all the rest will fit
Click to expand...
Click to collapse
It looks like it might, but I can't guarantee that it will. Here is an original tmobile housing but it'stoo expensive: http://www.htcrepairparts.com/full-coverhousing-for-htc-touch-pro-tmobile-p-2886.html
It is expensive :/ it not be bad to try to install this housing of tilt 2 but I'm afraid it won't fit, speaker, front key, display and rest :/
Related
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Nishant said:
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Click to expand...
Click to collapse
Have you searched on ebay, i always get all my PDA parts there...
As above
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Hi,
I broke my screen glass and the touch-screen (digitizer?) works just fine, as well as the LCD panel.
I would like to (try to) replace the glass, but I am in a kind of the same dilema as you.
I think the digitizer is touch-receiver + GLASS (not just the thin film).
Can you (or anyone else) confirm this?
Thanks,
cheers,
Nenad
Nishant said:
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Click to expand...
Click to collapse
The part you want is the digitizer, that the part you touch with your stylus, the lcd screen sits underneath this, they are glued together and are hard to seperate, buying just the digitizer can lead to many problems, its better to buy an lcd screen and digitizer allready together then just replace the whole thing
Hi all
my elfin fell from quite a high place, and the four casings into which the small screws visible when you take off the back cover are broken...meaning the front casing is loose too.
do you know where I can find a front cover (I don't really need the back but I'm okay with buying both)... but before that I was thinking maybe someone could have bricked their elf or had an unusable device but with a front cover that's ok...
thanks in advance for your help !
Plenty of covers in a selection of colors on eBay, I suggest you try to find one there. Not that expensive and you can buy a digitizer to match the color.
hi
thnx for your answer . what's a digitizer?
ptitrusse said:
hi
thnx for your answer . what's a digitizer?
Click to expand...
Click to collapse
Digitizer is the outer screen cover attached to the faceplate that is responsible for touch function, the one you use your finger or stylus on. It's sold separately and is fairly easy to replace in cases when the touch function is lost or the digitizer is broken. You can get one to match the color of the housing for a complete look. Just look on eBay and you'll see what I mean.
oh... does that mean that the part responsible for touch function is actually stuck to the front casing and not to the screen itself? I hadn't thought about that... meaning I cannot jut change the front cover, I would have to replace this as well...
[edit] is it possible to use the one from my phone? cause it's working fine after all... I'm looking at it and I don't really know how to take it off...
ptitrusse said:
oh... does that mean that the part responsible for touch function is actually stuck to the front casing and not to the screen itself? I hadn't thought about that... meaning I cannot jut change the front cover, I would have to replace this as well...
[edit] is it possible to use the one from my phone? cause it's working fine after all... I'm looking at it and I don't really know how to take it off...
Click to expand...
Click to collapse
The digitizer is attached to the housing and in your case needs to be pried off before being used again and re-attached to the new housing. The digitizers are fairly cheap (the reason I don't bother with screen protector), so you will get unscratched and new one that you will have to attach to the new housing. My recommendation would be to buy a new housing and a matching digitizer.
Hi
thnx again for your help. I have one more question. Is the digitizer stuck to the screen or is it the actual hard plastic screen?
I find it's actually fairly expensive. When you add up the housing + the digitizer + the shipping costs it adds up to quite a lot..
[edit] Ok I think I finally got it now.
what do you think of this product ?
HERE
Hi. I just got a used HTC One X phone, but the digitizer is cracked. I understood that I can't change only the digitizer, so I wanna buy a digitizer+LCD display assebmly. Now I have a problem. Reading on the internet I found that there are 2 different screens, with green and yellow flex cable. Which one is for my phone? I have the international version with Tegra 3.
CaracalSef said:
Hi. I just got a used HTC One X phone, but the digitizer is cracked. I understood that I can't change only the digitizer, so I wanna buy a digitizer+LCD display assebmly. Now I have a problem. Reading on the internet I found that there are 2 different screens, with green and yellow flex cable. Which one is for my phone? I have the international version with Tegra 3.
Click to expand...
Click to collapse
if you are going to change it youself then best to open your hox and match the serial number
My idea was to open the phone after I have all parts (want to change the housing and display assembly) from ebay. I saw that they ship the parts with tools, because now I don't have any.
Sorry for double post, but I wanted to tell you that I managed to change my LCD display. I bought this one: http://www.ebay.com/itm/111039746173?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 and I am very glad. I didn't noticed any contrast/color differences. Everything worked as it should, except vibrate, which doesn't work anymore and I don't know why, I triple checked the connectors of the vibrator.
If someone want to change by himself, just go to service I had a very hard time to take the phone apart (I also changed the back case cover).
Oh, the old LCD had panel_vendor and panel_id 944701. Same with the new one.
I have a black GT N7000.
While replacing a faulty charging port, I lost one of the black screws on the back of the phone. I'm wondering if I can find a replacement screw for cheap at radioshack or something.
I came across this ebay posting for replacement screws. But I need just one of these black screws
http://www.ebay.com/itm/OEM-SAMSUNG...e_Replacement_Parts_Tools&hash=item1e8513c047
What is the size (model) of this screw? I can use the size number/model and ask for one at a radishack/phone store nearby.
When i had that problem my local optician had a screw that fit.
That was a different phone though, but give that a try.
where change full screen ....?
jlssalgado said:
where change full screen ....?
Click to expand...
Click to collapse
As someone that has cracked my screen, my solution was to buy a bricked note and replace its guts with mine..
Hi, Im wondering wether or not change my screen on my d851 (it costs $100 in bolivia). Only option here is changing the entire LCD+touch+front housing. I get this error (see on attached file) on auto touch test under hidden menu.
Does this means that the problem is the touch screen? Or the motherboard?
Im thinking of buying a cheaper phone because of this...
I miss my g3...
This may fix you up.....
I bought a new digitizer and midframe combo for the phone. The one I bought did not have a blue piece of tape over the needed threee pins on the mainboard. I peeled off my old blue tape and placed it over the new 3 pin position of the new midframe assembly and rebooted. Touch works like a charm now......see the pic I enclosed.
cybercuate said:
Hi, Im wondering wether or not change my screen on my d851 (it costs $100 in bolivia). Only option here is changing the entire LCD+touch+front housing. I get this error (see on attached file) on auto touch test under hidden menu.
Does this means that the problem is the touch screen? Or the motherboard?
Im thinking of buying a cheaper phone because of this...
I miss my g3...
Click to expand...
Click to collapse