Dear all,
Thanks in advance. My friend have a Galaxy Note II, which stuck at the black screen with the word "Samsung GALAXY Note II GT-N7100". I try to go into recovery mode (Up, home and power button), it able to go inside with an android logo, but without selections for reset or recovery.
I then try to go into Download Mode (Down, Home and Power button), it seems able to go inside the mode with all the product name etc listed inside. While searching for the solution, i tried these:
http://forum.xda-developers.com/showthread.php?t=1896696
I try the first part which is flash a stock rom... but from the Odin interface, it stated there is no pit partition. I then turn off the phone and redo the procedure. When i try to start download the rom, this time it stated complete (write) operation failed.
I am not really familiar with these flash and odin and etc, just try my luck... but it seems no luck. Can anyone give me some advise on how to fix this? Thanks...
If further details is needed, just let me know, cause i am not sure what should information i should provide.
Thanks again....
** By the way, i realize that when ever i try to switch off the phone, it will automatically switched on but still stuck at the welcoming screen... it wont let me switch off.. **
xiaoyaotaigong said:
Dear all,
Thanks in advance. My friend have a Galaxy Note II, which stuck at the black screen with the word "Samsung GALAXY Note II GT-N7100". I try to go into recovery mode (Up, home and power button), it able to go inside with an android logo, but without selections for reset or recovery.
I then try to go into Download Mode (Down, Home and Power button), it seems able to go inside the mode with all the product name etc listed inside. While searching for the solution, i tried these:
http://forum.xda-developers.com/showthread.php?t=1896696
I try the first part which is flash a stock rom... but from the Odin interface, it stated there is no pit partition. I then turn off the phone and redo the procedure. When i try to start download the rom, this time it stated complete (write) operation failed.
I am not really familiar with these flash and odin and etc, just try my luck... but it seems no luck. Can anyone give me some advise on how to fix this? Thanks...
If further details is needed, just let me know, cause i am not sure what should information i should provide.
Thanks again....
** By the way, i realize that when ever i try to switch off the phone, it will automatically switched on but still stuck at the welcoming screen... it wont let me switch off.. **
Click to expand...
Click to collapse
post a picture of your download mode.. does it say model number is n7100?
It does shows N7100. Is there anything i can do to save this note II?
I can't find a way to upload a photo here...
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (4 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNDX WARANTY VOID: 1
AP SWREV: A2
I suggest downloading the stock firmware from here: http://www.sammobile.com/firmwares/database/GT-N7100/
Flash the firmware using Odin: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
audit13 said:
I suggest downloading the stock firmware from here: http://www.sammobile.com/firmwares/database/GT-N7100/
Flash the firmware using Odin: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Click to expand...
Click to collapse
Hello, i downloaded from the sammobile and flash the firmware using Odin 3.04. The first time, it come out an info as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Next, i click START again, this time with the info below:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
May i know what should i do now to further troubleshoot this issue?
Thanks in advance
Related
Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?
This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse
Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium
You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.
Hi guys..I am new here and i enter in this forum beacuse of a problem...my Phone is Samsung Galaxy Pocket...i root my phone and add a custom ROM called JellyblastV3..any way after lots of upadates for the ROM i saw that with the last update i wasnt able to enter my setting in the phone i decide to install jellyblast again...my phone stuck on boot screen in the logo on starup...i enter odin mode and from the PC and i had this dialog with the problem FAIL!....
<ID:0/065> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXMD1_S5300OXXMD1_RST_S5300XXMD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/065> Odin v.3 engine (ID:65)..
<ID:0/065> File analysis..
<ID:0/065> SetupConnection..
<ID:0/065> Initialzation..
<ID:0/065> Get PIT for mapping..
<ID:0/065> Firmware update start..
<ID:0/065> Sbl.bin
<ID:0/065> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also try splitfus2...also when i wait lots of time 20-30 mins i turn the phone in the side and i can see the home screen but i cant sellect because the bootscreen logo is on my way i try wipe cache the data but nothing...i cant reinstall the jellyblast because because the phone dont 'see' the external sd...and 1 more detail..the last time my phone worked i try to unrooted with a zip file called unroot if this matters....i dont know what else to do..plz help....
P.S Sorry for my english...
I guess you soft bricked your phone. try flashing back to stock ROM.:good:
Pranjal.raze said:
I guess you soft bricked your phone. try flashing back to stock ROM.:good:
Click to expand...
Click to collapse
well...idk if i am soft bricked but i dont know if i am able to flash my stock ROM...i try many things...and i am still briked
I tried to root my phone, but i goofed up somehow. Odin FAILED in the middle of the process, and got soft-bricked. When I turn the phone on now I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" (cs3-4.4pda.to/2767010.jpg):crying:
When I tried again, I get the following message in Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I try in keis, it says phone not compatible. Probably because of the bit counter thing. When i try to press volume down, home, power get:
Current bin: coustom
system status: official
Click to expand...
Click to collapse
I cannot enter into wipe mode: ie., volume up, home, power.
How should I proceed now? Any help is appreciated.
Also if anyone has link to Samsung Galaxy Grand Duos i9082 official rom, and steps to install it that would be great. I tried downloading from sammobile, but it is dead slow.
Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07
Memo Yasso said:
Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07
Click to expand...
Click to collapse
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning
insp1 said:
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning
Click to expand...
Click to collapse
Try This :
https://www.mediafire.com/?2t9xag9mmg84o11
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925T_UVU2COF8_BASEBAND.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I get this anytime I try to do a flash, not for sure what to do. kinda bricked right now, but been doing some research and I see that bthere is a PIT file i can flash back onto it? but I cant find it for the S6, do we have access to a PIT file yet? can anyone help me please?
I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.
jlmnote said:
I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.
Click to expand...
Click to collapse
sorry mi englesh (i`m brazilian)
I have same problem, buts after ( not a pit found) now is ( e: failed to mount )
helpe please.
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
ccsrichman said:
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
Click to expand...
Click to collapse
what version of Odin are you using?
Give THIS version a try.
If it fails, post a screenshot of Odin.
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ccsrichman said:
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Anybody else has any ideas ?
gr8nole said:
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Click to expand...
Click to collapse
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
ccsrichman said:
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
Click to expand...
Click to collapse
And the text there is:
ODIN MODE
PRODUCT NAME: SM-T110
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
nothing else
Also a newbie with the Tab TM-110
Hi there
Since we are not many here with our device i thought i should send you a message.
Unfortunately i do not have a solution for your problem but maybe it helps if you take a look at what i experienced so far.
I hope you can find my Thread by my profile.
Have you tried to use a different PC yet for flashing with Odin? Would be interesting to know if it helped.
So. Don`t give up. There will be a solution. :good:
Naturestone
I'm having the same issue, anyone can help?
same error GT-I8200 2ND partition error