Develop Bugs

My Samsung Note 2 is...BRICKED? Don't start (Galaxy Note 2 Brikkato, Non Parte !)

Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...

First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya

Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?

This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse

Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium

szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...

Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium

You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.

[N5100 Can't flash stock rom via ODIN] HELP!

Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!

rongregoryred said:
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
Click to expand...
Click to collapse
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.

CCallahan said:
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
Click to expand...
Click to collapse
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.

rongregoryred said:
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
Click to expand...
Click to collapse
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/

I had a similar problem with my note 8.0. I can't remember exactly what I did but I managed to get it to reboot. It'll reboot to download but after it booted into download mode my Odin was able to find it.
---------- Post added at 09:19 PM ---------- Previous post was at 09:03 PM ----------
I think maybe holding down the power button should reboot it.

CCallahan said:
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
Tried heimdall, but no work. I think it's because of Knox. It won't flash Stock rom through Odin or heimdall.
BTW, i flashed a recovery through Odin and it works. Now im running a Custom Rom. Thanks for the help guys!

I'm currently in the same situation
What recovery did you flash?
I odin 4.4.4 poland.. it failed, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies
I can't go to recovery, I tried to odin recovery but no luck
and in odin mode it says Secure Download : enabled
EDIT: I use philz_touch_6.48.4-n5100.tar.md5.. and it works

[Q] Stock note 2 bootloop

Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a bootloop so first thing i thought of was to flash stock firmware,
So i did that and the Samsung logo just flashes for eternity :| she hasn't done anything like rooting etc.
So i downloaded the UK stock firmware(her note 2 is the THR) but it's still in bootloop!
I can't get into recovery to wipe data! when i hold the key combos, it just keeps rebooting (samsung note II - n7100 black and white one)
(I actually needed help flashing the rom but not its fixed i need help with this and i didn't want to make another thread)
should i try to use put and re-partition?!

kamranhaghighi said:
Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a boot loop so first thing i thought of was to flash stock firmware
so i downloaded the UK firmware (although i have no idea what country it is, but it doesn't make difference right?!)
and it gave me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do ?
i have windows 8 and odin 3.09
Edit: I got the firmware from here :
http://www.cnet.com/how-to/how-to-restore-a-galaxy-note-2-from-rooted-to-factory-settings/
My country's firmware is not available anywhere
Click to expand...
Click to collapse
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.

gb61 said:
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.
Click to expand...
Click to collapse
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|

kamranhaghighi said:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|
Click to expand...
Click to collapse
It should be good to try with Odin more recent if you can.
Iran firmware on the image .

How did you find it i saw that website too but i couldn't find the firmware!
I will try odin 3.07 and post results

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
YEAH! it worked ! thanks so much but i'm afraid it will not work, im still on samsung lighting up and down but i only waited like 1min, it had this problem expect it would not boot at all!
EDIT: ok flashing stock didn't help. i still got bootloop, any idea how to fix this?!
i also can't get into recovery, it only gives me a red led when i hold volUp+Home+power!
i did a few things now i can't even flash the old one with 3.0.7, gives the same error it did on 3.09 , i give uP! somebody help me :|

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
flashing the one i got from sammobile gives me this:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
edit: sounds like it is because its an old firmware!
now i can't even flash the UK with 3.07!

should i make a new thread for my bootloop? (i still got bootloop after going stock)

kamranhaghighi said:
should i make a new thread for my bootloop? (i still got bootloop after going stock)
Click to expand...
Click to collapse
Hello,
have you try to install a custom rom ?

gb61 said:
Hello,
have you try to install a custom rom ?
Click to expand...
Click to collapse
No!

kamranhaghighi said:
No!
Click to expand...
Click to collapse
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?

gb61 said:
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?
Click to expand...
Click to collapse
I just saw it now, and no i can't get into recovery, i will read the link you gave me tomorrow, im super tired today! and also have an exam

my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.

grwalker said:
my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.
Click to expand...
Click to collapse
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)

kamranhaghighi said:
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)
Click to expand...
Click to collapse
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.

gb61 said:
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.
Click to expand...
Click to collapse
i'm also going to check re-partition and use pit file. is that a good idea?

i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Have you follow this steps ?
How to Install ClockworkMod Recovery 6.0.4.4 on Galaxy Note 2 N7100
Download Odin v3.09.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Note 2 N7100 in Download Mode by pressing and holding down the Volume Down, Home and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you downloaded earlier. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Note 2 N7100 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)

gb61 said:
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)
Click to expand...
Click to collapse
ok thanks! btw in the process of doing this i gave myself a nice electric shock 0_0 it came from 2 connectors from back of the device ! i got pass anyway
edit: it will take an hour~ i will post results when its done!

No PIT found in Odin

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925T_UVU2COF8_BASEBAND.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I get this anytime I try to do a flash, not for sure what to do. kinda bricked right now, but been doing some research and I see that bthere is a PIT file i can flash back onto it? but I cant find it for the S6, do we have access to a PIT file yet? can anyone help me please?

I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.

jlmnote said:
I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.
Click to expand...
Click to collapse
sorry mi englesh (i`m brazilian)
I have same problem, buts after ( not a pit found) now is ( e: failed to mount )
helpe please.

Samsung tab 3 lite SM-T110 bootlooping and nothing helps so far

My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.

ccsrichman said:
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
Click to expand...
Click to collapse
what version of Odin are you using?
Give THIS version a try.
If it fails, post a screenshot of Odin.

I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

ccsrichman said:
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.

Anybody else has any ideas ?

gr8nole said:
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Click to expand...
Click to collapse
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there

ccsrichman said:
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
Click to expand...
Click to collapse
And the text there is:
ODIN MODE
PRODUCT NAME: SM-T110
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
nothing else

Also a newbie with the Tab TM-110
Hi there
Since we are not many here with our device i thought i should send you a message.
Unfortunately i do not have a solution for your problem but maybe it helps if you take a look at what i experienced so far.
I hope you can find my Thread by my profile.
Have you tried to use a different PC yet for flashing with Odin? Would be interesting to know if it helped.
So. Don`t give up. There will be a solution. :good:
Naturestone

I'm having the same issue, anyone can help?

same error GT-I8200 2ND partition error