Develop Bugs

Pleaseeee helpppppppp....real emergency :'(

i was running creed's rom v2.1 and was wishing to upgrade my firmware,PDA n CSC with files in doky's thread.
i was reading about preparing phone before odin flash on internet and found that its advisable to hard reset mobile before flashing through odin..
so i got this code *2767*3855# and i entered it and after a while my phone rebooted and was stuck at boot animation with continues boot loops..
i quickly removed the back cover and removed the battery for 30 sec and put it back....tried to go into recovery mode using normal [volup]+[home]+[power] and it didint enter recovery , instead rebooted again and same..boot loops
i then assumed that my phone was bricked
i then went on to this tread for soft/hard brick http://forum.xda-developers.com/showthread.php?t=1498327
followed that link to the forum....decided to flash my phone to stock as MY PHONE COULD BOOT INTO DOWNLOAD MODE AND NOT RECOVERY
i downloaded the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 file...opened odin v1.85 as admin in win7....then loaded that file onto PDA and left all other boxes to default ,,,connected my mobile via USB in recovery mode and i got the following error...i keep getting this error....no matter what i do...even earlier i tried installing doky's packages using odin and my odin gave same error...i tried both odin version....v1.85 and v1.84
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102DDLA3_S6102ODDLA3_S6102DDLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP GUYS :'(
WHAT SSHOULD I DO NOW ? :'(
IS THERE ANYWAY OUT ?

machinehead121 said:
i was running creed's rom v2.1 and was wishing to upgrade my firmware,PDA n CSC with files in doky's thread.
i was reading about preparing phone before odin flash on internet and found that its advisable to hard reset mobile before flashing through odin..
so i got this code *2767*3855# and i entered it and after a while my phone rebooted and was stuck at boot animation with continues boot loops..
i quickly removed the back cover and removed the battery for 30 sec and put it back....tried to go into recovery mode using normal [volup]+[home]+[power] and it didint enter recovery , instead rebooted again and same..boot loops
i then assumed that my phone was bricked
i then went on to this tread for soft/hard brick http://forum.xda-developers.com/showthread.php?t=1498327
followed that link to the forum....decided to flash my phone to stock as MY PHONE COULD BOOT INTO DOWNLOAD MODE AND NOT RECOVERY
i downloaded the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 file...opened odin v1.85 as admin in win7....then loaded that file onto PDA and left all other boxes to default ,,,connected my mobile via USB in recovery mode and i got the following error...i keep getting this error....no matter what i do...even earlier i tried installing doky's packages using odin and my odin gave same error...i tried both odin version....v1.85 and v1.84
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102DDLA3_S6102ODDLA3_S6102DDLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP GUYS :'(
WHAT SSHOULD I DO NOW ? :'(
IS THERE ANYWAY OUT ?
Click to expand...
Click to collapse
try updating thru kies or flashing custom rom...

zeusseuz said:
try updating thru kies or flashing custom rom...
Click to expand...
Click to collapse
but sir how can i ?
odin keeps giving me that error with my phone
it cant even enter recovery mode....nor does it boot completely...just has boot loops
please suggest me a way out

budy the file you try to flash its not right.its one file and odin dont suport it for our phone.go to development section and find odin firmware packages by Docky.download yours and flash it!you are ready!report back if need more help

termagazis said:
budy the file you try to flash its not right.its one file and odin dont suport it for our phone.go to development section and find odin firmware packages by Docky.download yours and flash it!you are ready!report back if need more help
Click to expand...
Click to collapse
sir....i tried already.......and after you said so//..i just tried again.....here it is..same error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

machinehead121 said:
sir....i tried already.......and after you said so//..i just tried again.....here it is..same error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
so the firmware you downloaded was one file or 3 files?

termagazis said:
so the firmware you downloaded was one file or 3 files?
Click to expand...
Click to collapse
3 compressed files sir
PDA_S5360_DDLA3
MODEM_S5360_DDLA2
CSC_S5360_ODDLA2

machinehead121 said:
3 compressed files sir
PDA_S5360_DDLA3
MODEM_S5360_DDLA2
CSC_S5360_ODDLA2
Click to expand...
Click to collapse
ok just checking your steps.
so you put pda_s5360 in pda field
modem in phone field
csc in csc field
right?and you didnt check the repartition ?

At first, I think Your phone wasn't bricked, it was just a slight boot-loop.
Maybe You pressed the buttons in wrong tact.
As long as you see boot animation, the recovery and download menu 100% surely accessible.
Try again to go download monde, flash one of my packages (avoid one-file packs)!
If got boot loop, then go to recovery (follow my hints in post #2 of Odin packs topic to access recovery and download mode)
...then wipe cache and data!
Hope you succeed!

termagazis said:
ok just checking your steps.
so you put pda_s5360 in pda field
modem in phone field
csc in csc field
right?and you didnt check the repartition ?
Click to expand...
Click to collapse
yup.....exactly...all steps neatly followed as mentioned in doky's post

machinehead121 said:
yup.....exactly...all steps neatly followed as mentioned in doky's post
Click to expand...
Click to collapse
weird.try another firmware

Doky73 said:
At first, I think Your phone wasn't bricked, it was just a slight boot-loop.
Maybe You pressed the buttons in wrong tact.
As long as you see boot animation, the recovery and download menu 100% surely accessible.
Try again to go download monde, flash one of my packages (avoid one-file packs)!
If got boot loop, then go to recovery (follow my hints in post #2 of Odin packs topic to access recovery and download mode)
...then wipe cache and data!
Hope you succeed!
Click to expand...
Click to collapse
not sure about slight boot loop sir...but it was stuck on boot anim for quite a long time....
i did sir..i tried flashing only 1 of your package....modem....and same error again
and i still cant enter recovery mode....download mode is still accessible....but now....my phone is not even able to go up till boot anim :| its just stuck on samsung logo

termagazis said:
weird.try another firmware
Click to expand...
Click to collapse
i tried single packs as well sir.....like just pda...or modem......still same error.....odin aint working no matter what i do "(

machinehead121 said:
i tried single packs as well sir.....like just pda...or modem......still same error.....odin aint working no matter what i do "(
Click to expand...
Click to collapse
i mean download another firmware from doky put all files and flash.another firmware different than that you try

On SAMMOBILE there is two DDLA1 packs, one of them (named S5360DDLA1_S5360ODDLA1_ODD.rar ) contains 4 or 5 files.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5360&r=2#regiona
Download and flash it, with the bootloader part as well!
Put "DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5" to the bootloader, and the other parts as usual (PDA, MODEM, CSC)
PIT and repartition NOT NEEDED!

termagazis said:
i mean download another firmware from doky put all files and flash.another firmware different than that you try
Click to expand...
Click to collapse
ok sir...it is gonna take time for me to download the packages again...
or should i just just take my phone to samsung service centre ?

Doky73 said:
On SAMMOBILE there is two DDLA1 packs, one of them (named S5360DDLA1_S5360ODDLA1_ODD.rar ) contains 4 or 5 files.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5360&r=2#regiona
Download and flash it, with the bootloader part as well!
Put "DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5" to the bootloader, and the other parts as usual (PDA, MODEM, CSC)
PIT and repartition NOT NEEDED!
Click to expand...
Click to collapse
oh i searched that file and iam downloading it now sir
gonna try this one too *fingers crossed*
is this a serious issue sir ?

btw, Kies has to be closed when flashing via Odin!

doky73 said:
btw, kies has to be closed when flashing via odin!
Click to expand...
Click to collapse
omg...sir i wanna thank you alotttttttttttttt !!
It worked :d
hell your awesome sir ! :d
hats off to you.
Wish i could do something more than pressing thanks button..but i can wish goodluck for you and your future projects =)
once again thanks alot sir !

...........

Flashing stock rom with odin, "stuck" at system

The reason I said "stuck" is because I don't know if it is actually stuck. I am worried because as with my worst fear is bricking my phone. Here is a screenshot of what I am seeing:
(never mind cant post links yet) It looks like this:
(a bunch of stuff)
recover.img
system.img.ext4
then that is where it ends. There is no error message or anything. It would lead me to believe that it is still working. What do I do?
It has not said anything else yet so I dont know what to do. Its been like this for about 10 minutes and not saying anything. I cant imagine it actually taking this long for "system.img.ext4" to get added. Did I do something wrong or what?

Can you post the Log of what Odin did ? You can see and copy the log within Odin Window.
Also please post what Android Version you had before and what you were trying to flash.

Perseus71 said:
Can you post the Log of what Odin did ? You can see and copy the log within Odin Window.
Also please post what Android Version you had before and what you were trying to flash.
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
Here you go. As far as the version goes I was running the latest version of cyanogenmod. If anyone knows the simplist way to back to stock or even just put another rom on please tell me. I would really just like to gain use of my phone back.

You are on right track. Don't try NC2. Try UVDMD5 instead if you had 4.2.1 before CM. If you had accepted Stock 4.3 update UVUEMJC then flash that with Odin Instead.
That Log seems incomplete. Can you please re-post if there was anything after that last line ?

Perseus71 said:
You are on right track. Don't try NC2. Try UVDMD5 instead if you had 4.2.1 before CM. If you had accepted Stock 4.3 update UVUEMJC then flash that with Odin Instead.
That Log seems incomplete. Can you please re-post if there was anything after that last line ?
Click to expand...
Click to collapse
There is not anything. It just keeps running. I left have left it running since I made this post and still had not moved on. I am a little confused to what you are saying. Could you make it a little more simple or provide links? Thanks.

Depends on what Android version you had before CM. There is a Fork in the Road. The direction we choose varies depending on what you had. In particular, have you ever accepted the 4.3 update from Samsung ? Or had flashed that via Kies / Root66 ??

Perseus71 said:
Depends on what Android version you had before CM. There is a Fork in the Road. The direction we choose varies depending on what you had. In particular, have you ever accepted the 4.3 update from Samsung ? Or had flashed that via Kies / Root66 ??
Click to expand...
Click to collapse
Don't know if it helps but I rooted the device around november. I don't remember the version. Due to how long ago it was I remember very little details. I flashed something with odin and thats what I remember. In november I rooted it and put a ROM on it and left it alone till now. So what ever the latest update was in November as what I had. By the way thanks so much for the help. I was really nervous and you are giving me hope. Pardon grammer errors. Typing this on nexus 7 and not use to keyboard

Ok, if that is the case, then please put the device in Bootloader mode and post Everything you see on that Screen. In particular I want to know if you have Warranty Bit or Knox.

Perseus71 said:
Ok, if that is the case, then please put the device in Bootloader mode and post Everything you see on that Screen. In particular I want to know if you have Warranty Bit or Knox.
Click to expand...
Click to collapse
And how do I do this? Keep in mind if I boot the phone up right now it just "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I can get into download mode but not recovery mode. I am not sure what bootloader is.
If your talking about the screen I just referred to it says:
odin mode
Product name: SGH-t999
Custom binary download: Yes (1 counts)'
Current binary: Samsung official
Qualcomm secure Secureboot: Enable
Warrenty bit: 0
Bootloader Rp swrev: 1

griffsbrown said:
And how do I do this? Keep in mind if I boot the phone up right now it just "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I can get into download mode but not recovery mode. I am not sure what bootloader is.
Click to expand...
Click to collapse
My bad, I meant Downloading mode. Its the same thing.

Perseus71 said:
My bad, I meant Downloading mode. Its the same thing.
Click to expand...
Click to collapse
Oh alright I edited my last post with the info so check that

In that case please Odin flash Root66 of UVUEMJC from this thread. Direct link to the file is here.

Perseus71 said:
In that case please Odin flash Root66 of UVUEMJC from this thread. Direct link to the file is here.
Click to expand...
Click to collapse
Alright doing that now. Long download time but I will post back with results later.

griffsbrown said:
Alright doing that now. Long download time but I will post back with results later.
Click to expand...
Click to collapse
Make sure to put the phone in download mode and connecting before launching Odin.

Perseus71 said:
Make sure to put the phone in download mode and connecting before launching Odin.
Click to expand...
Click to collapse
Ok back with results. Download time was a lot shorter then expected. It is the exact same problem as the reason I started this post. It gets to a certain point and just stops loading. That point is "system". The logs I posted already in the thread apply to this as well. When I was first trying it never got further then around 5% but right now with this new method you gave me to try it froze around 40%. Any ideas? Also If its worth mentioning I am using odin3 v1.85
EDIT: For the first time it actually said "fail!". The logs look something like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVUEMJC.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(Also if its worth mentioning I switched to Odin3 V3.09 for the sake of seeing if it made a difference

Get Odin 3.07 version then Try.
Remove each and every Samsung Driver from the PC then reboot the PC. Download "Odin Drivers" from Odin's website. Install them. Then Put the phone in Download mode and connect to PC. Do not launch Odin. Let the drivers finish and make sure they correctly recognize your phone. Once that Process is complete, then and then alone launch Odin.exe

Perseus71 said:
Get Odin 3.07 version then Try.
Remove each and every Samsung Driver from the PC then reboot the PC. Download "Odin Drivers" from Odin's website. Install them. Then Put the phone in Download mode and connect to PC. Do not launch Odin. Let the drivers finish and make sure they correctly recognize your phone. Once that Process is complete, then and then alone launch Odin.exe
Click to expand...
Click to collapse
Froze at the same place. I can post screenshots now so:
http://puu.sh/7I88Y.png

Can you get into Stock Recovery ? If so, please do factory Reset and wipe everything.

Perseus71 said:
Can you get into Stock Recovery ? If so, please do factory Reset and wipe everything.
Click to expand...
Click to collapse
Ok done. What next?

Try to Flash a custom Recovery via Odin this time. If that goes successful, please flash any custom Rom of your choice via that Custom Rom. I know you are wanting to go back to stock. I need the phone to boot first so I can check something.

[Q] Help with unbrinking Samsung Galaxy Grand Duos i9082 (Soft bricked)

I tried to root my phone, but i goofed up somehow. Odin FAILED in the middle of the process, and got soft-bricked. When I turn the phone on now I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" (cs3-4.4pda.to/2767010.jpg):crying:
When I tried again, I get the following message in Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I try in keis, it says phone not compatible. Probably because of the bit counter thing. When i try to press volume down, home, power get:
Current bin: coustom
system status: official
Click to expand...
Click to collapse
I cannot enter into wipe mode: ie., volume up, home, power.
How should I proceed now? Any help is appreciated.
Also if anyone has link to Samsung Galaxy Grand Duos i9082 official rom, and steps to install it that would be great. I tried downloading from sammobile, but it is dead slow.

Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07

Memo Yasso said:
Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07
Click to expand...
Click to collapse
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning

insp1 said:
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning
Click to expand...
Click to collapse
Try This :
https://www.mediafire.com/?2t9xag9mmg84o11

[Q] Black Screen of Death after flashing Stock-Rom with Odin

Hi everybody,
i have same problems with the Stock-Rom of Lolipop with VD2-Branding.
ODIN has faild with:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1BOCC_T805VFG1BOC4_T805XXU1BOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now i have a "Black Screen of Death".
The ROM: VD2-T805XXU1BOCC-20150403134302.zip
Odin: 3.10.6
Hardware: Samsung Galaxy Tab S LTE 16GB (SM-T805) from Vodafone D2 Germany
Flashing with TWRP also failed. Is it possible, that i use the wrong image?
Edit: Now it works, but the way was very terrible. Odin flashing till error. Following this i have flash the Recovery TWRP. Now the Tablet has booted, but i disbelieve it works fine.
Can someone help me to install the offiicial Rom correctly?
Thanks a lot and have a nice day!
best regards masterkifke

Masterkifke said:
T805XXU1BOCC_T805VFG1BOC4_T805XXU1BOC1_HOME.tar.md5
Click to expand...
Click to collapse
Masterkifke said:
VD2-T805XXU1BOCC-20150403134302.zip
Click to expand...
Click to collapse
Masterkifke said:
Hardware: Samsung Galaxy Tab S LTE 16GB (SM-T805) from Vodafone D2
Click to expand...
Click to collapse
Does your SM-T805 have a letter after the model? Like C, M, W or Y?
If not, then when I search www.sammobile.com for your firmware, this is the download file name I find that you should be using. I am not sure what the file name will be after extracting the zip though. Would take five hours of downloading for me to find out.
But if you compare this name to the file you originally downloaded and it is the same, then I think you are flashing the correct firmware.
T805XXU1BOCC_T805VFG1BOC4_VD2.zip

Ignore the error then boot into recovery and wipe cache.
Job done.

Thanks for help.
The device comes without an extension like C , M, W or Y and the ROM is from sammobile. So i think the ROM is correct.
But the problem is after flashing and getting the error, i don't have any access to recovery and for wipe the cache -> POWER + VOLUME UP + HOME goes directly into "Back Screen of Death".
So i must install TWRP before.
But my target is to the device bringing back into factory state.
At the moment it works fine.
Thank you for help.
best regards from germany
masterkifke

It won't boot if you don't have a valid recovery installed. Flashing stock firmware always installs stock recovery.
So either reflash stock firmware, flash stock recovery or flash twrp.
However I can quite clearly see from your first post that recovery has flashed fine, so it seems the problem is you are not using the right timing and button combo to enter recovery mode.
Many people have encountered the hidden.img fail when flashing a different region firmware as its csc specific.
All you need do to solve it is enter recovery mode and wipe cache.

Samsung tab 3 lite SM-T110 bootlooping and nothing helps so far

My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.

ccsrichman said:
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
Click to expand...
Click to collapse
what version of Odin are you using?
Give THIS version a try.
If it fails, post a screenshot of Odin.

I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

ccsrichman said:
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.

Anybody else has any ideas ?

gr8nole said:
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Click to expand...
Click to collapse
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there

ccsrichman said:
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
Click to expand...
Click to collapse
And the text there is:
ODIN MODE
PRODUCT NAME: SM-T110
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
nothing else

Also a newbie with the Tab TM-110
Hi there
Since we are not many here with our device i thought i should send you a message.
Unfortunately i do not have a solution for your problem but maybe it helps if you take a look at what i experienced so far.
I hope you can find my Thread by my profile.
Have you tried to use a different PC yet for flashing with Odin? Would be interesting to know if it helped.
So. Don`t give up. There will be a solution. :good:
Naturestone

I'm having the same issue, anyone can help?

same error GT-I8200 2ND partition error